RCA RCRH02BR User Manual

RCRH02BR

2-Device Universal Remote Control User’s Guide

Congratulations on your purchase of the RCRH02BR. This 2-Device Remote Control does just what a basic remote should: simplify! Made for streamlined 2-device TV and cable/satellite/digital TV converter setups, this remote is the ultimate in de-cluttering, leaving you just the buttons you need and none of the ones you don't. And with tactile cues on the channel and volume keys, all it takes is a touch to know what you're doing. Like all RCA remotes, this 2-Device Remote is easy to program, with support for over 210 brands* of TVs, satellite receivers, cable boxes and digital TV converter boxes.

* May not operate all models of all brands.

Made in China Fabriqué en Chine Hecho en China

RCRH02BR NA IB 01 UEI 16K Codes 2011 00

Trademarks ® Registered. Marques ® déposées. Marcas registradas ®.

www.rcaaudiovideo.com

RCRH02BR

Guía del Usuario del Control Remoto Universal para 2 Aparatos

Felicitaciones por la compra del RCRH02BR. Este Control Remoto para 2 Aparatos hace justo lo que un control remoto básico debería hacer: ¡simplificar! Fabricado para configuraciones de 2 aparatos, TV y convertidores para TV por cable/satelital/digital, este control remoto es lo más avanzado en sencillez, dejándole sólo los botones que usted necesita y ninguno de los que usted no requiere. Y con señales táctiles en las teclas de volumen y canal, todo lo que precisa es un toque para saber lo que está haciendo. Como todos los controles remotos RCA, este control remoto para 2 aparatos es fácil de programar, con soporte para más de 210 marcas* de TVs, receptores satelitales, convertidores para TV por cable y convertidores para TV digital.

* Puede no funcionar en todos los modelos de todas las marcas.

ENGLISH 2 ENGLISH 3 ENGLISH 4 ENGLISH 5 ENGLISH 6 ESPAÑOL 7 ESPAÑOL 8

Direct Code Entry

Direct Code Entry lets you enter a code from the code list at the end of this manual for your brand of device. It’s not as easy as the other methods, but it’s potentially the fastest method.

ENGLISH

2. Press and hold the CODE SEARCH key until the indicator light turns on.

3. Press the component key you want to program—TV or SAT·CBL·DTC.

The indicator light blinks once and remains lit.

Important: Find the ENTER key on your remote (don’t press it yet). You will need to

press this key quickly in step 5 below.

4. Point the remote directly at the front panel of the device you want to

control. Press the POWER key and wait for the indicator light to blink. Each time the indicator light blinks, the remote is testing a code with the device. Make sure you keep the remote pointed at the device you want to operate.

5. As soon as the component turns off, press the ENTER key within 4

seconds.

Note: If you wait longer than 4 seconds to press ENTER, the remote goes to the next

code—you will need to start the code search from step 1 again.

The indicator light flashes 8 times and turns off when the remote has searched all the

codes. If this happens, try one of the other programming methods.

6. Test the remote with your component to make sure you can control most

of the device’s functions. If some features don’t work, try the Direct Code Entry method.

1. Manually turn on the component you want to program the remote to

operate.

2. Find the four-digit code for your brand of TV, satellite receiver, cable box, or

digital TV converter in the code list at the end of this manual.

3. Press and hold the CODE SEARCH key until the indicator light turns on.

4. Press the component key you want to program—TV or SAT·CBL·DTC.

The indicator light blinks and then remains lit.

Note: “DTC” stands for Digital TV Converter.

5. Enter the four-digit code, using the numeric keypad. After the code is

entered, the indicator light turns off.

Note: If the indicator light blinks multiple times, you’ve entered an invalid code. Start from step 2 again.

Step 1: Install Batteries

Your RCRH02BR universal remote requires 2 new AAA alkaline batteries (sold separately).

To install the batteries:

1. Turn the unit over, remove screw and remove the battery door compartment cover.

2. Insert the batteries, matching the batteries to the (+) and (-) marks inside the battery case.

Battery Precautions:

• Do not mix old and new batteries.

• Do not mix alkaline, standard (carbon-zinc) or rechargable (nickel-cadmium) batteries.

• Always remove old, weak or worn-out batteries promptly and recycle or dispose of them in accordance with Local and National

Regulations.

Step 2: Program the Remote

To use this universal remote with your home entertainment system, first you need to program it to control your devices. There are three ways you can program the universal remote to operate your devices:

• The Auto Code Search goes automatically through all the codes for the device you’re trying to control. It’s the easiest method, but it can sometimes take longer than some of the other programming methods.

• The Direct Code Entry lets you enter a code from the accompanying code list for your brand of device. It’s not as easy as the other methods, but it’s potentially the fastest method.

• The Manual Code Search lets you manually go through all the codes for the device you’re trying to control.

Auto Code Search

The Auto Code Search goes automatically through all the codes for the device you’re trying to control. When you find the one that operates your device, you can stop the search and store that code.

1. Manually turn on the component you want to program the remote to

operate.

+ 2 hidden pages