RCA PRO-SW120P User Manual
CCCCOOOONNNNTTTTEEEENNNNTTTTSSSS
Safety Instructions .......................................................................... 2
Choosing a Location ...................................................................... 3
Attaching Feet ................................................................................ 3
Connecting to an Amplifier ............................................................. 3
Connecting to Subwoofer Out or Pre Out Terminals ...................... 4
Connecting to Speaker Terminals .................................................. 4
Connecting Speakers ..................................................................... 4
Connecting to Power ...................................................................... 5
Adjusting the Volume ..................................................................... 5
Adjusting the High Cut Frequency ................................................. 6
Care ............................................................................................... 6
Specifications ................................................................................. 7
1
40-5030.fm Page 1 Thursday, May 31, 2001 9:47 AM
PPPPRRRROOOO----SSSSWWWW12
Your RCA PRO-SW120P 120-Watt
Powered Subwoofer is designed to give
you the best possible low frequency sound
quality for the ultimate home theater
experience. You will be astonished by the
realism it adds to movie sound effects and
the power it lends to all kinds of music.
The subwoofer combines the power of a
built-in 120-watt RMS amplifier with a
responsive, 10-inch coated paper cone
woofer — all housed in a ported
bass-reflex enclosure to produce tight,
floor-rumbling, powerful bass (down to 44
Hz) that you can feel as well as hear! The
power indicator lets you see at a glance
when the subwoofer is operating.
Your subwoofer has an adjustable high cut
filter and high and low level inputs,
making it easy to incorporate into existing
systems, or you can use it as an integral
part of a subwoofer/satellite combination.
120000P
P 12
1212
P P
120000----WWWWaaaatt
1212
tt PPPPoooowwwweeeerrrreeeed
tt tt
d SSSSuuuubbbbwwwwoo
d d
NNNNooootttteeee:::: You need speaker wire (not
supplied) to connect the subwoofer to an
amplifier or receiver’s speaker outputs.
HHHHiiiiggggh
h LLLLeeeevvvveeeel
h h
the subwoofer between an amplifier or
receiver (without line out terminals) and
other speakers.
LLLLoooow
w LLLLeeeevvvveeeel
w w
subwoofer to an amplifier’s or receiver’s
subwoofer out or pre out jacks. These
inputs automatically sum left and right
channel information.
NNNNooootttteeee:::: You need phono cables (not
supplied) to connect the subwoofer to an
amplifier or receiver’s subwoofer out or
pre out jacks.
VVVVoooolllluuuummmme
PRO-SW120P’s output level to your
satellite speakers’ output (if used).
ooffffeeeerrrr
oooo
l OOOOuuuuttttpu
putttt — lets you connect
l l
pupu
l IIIInnnnppppuuuutttt — lets you connect the
l l
e CCCCoooonnnnttttrrrroooollll — lets you match the
e e
It also has these features:
AAAAuuuutttto
o OOOOnnnn////OOOOff
o o
the PRO-SW120P’s amplifier to standby if
the subwoofer does not receive a signal for
about 11 minutes.
SSSSttttaaaand
ndbbbby
ndnd
subwoofer is connected to power but not
receiving a signal.
HHHHiiiiggggh
h LLLLeeeevvvveeeel
h h
subwoofer to an amplifier’s or receiver’s
speaker outputs.
ff — automatically switches
ffff
y IIIInd
ndiiiiccccaaaattttoooorrrr — lights when the
y y
ndnd
l IIIInp
npuuuutttt — lets you connect the
l l
npnp
PPPPhhhhaaaasssse
e ((((PPPPoooollllaaaarrrriiiittttyyyy)
e e
subwoofer’s output polarity so you can set
it to match the main speakers.
FFFFrrrreeeeqqqquuuueeeennnnccccy
frequency cutoff point. Rotated fully
clockwise, it cuts high frequencies over
200 Hz. Rotated fully counterclockwise, it
cuts high frequencies over 50 Hz.
2001 RadioShack Corporation.
©
All Rights Reserved.
) SSSSwwwwiiiittttcccchhhh — inverts the
) )
y HHHHzzzz — controls the high
y y
40-5030.fm Page 2 Thursday, May 31, 2001 9:47 AM
WARNING:
shock hazard, do not expose this product to
rain or moisture.
CAUTION:
OF ELECTRIC SHOCK, DO NOT
REMOVE COVER OR BACK. NO USERSERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED PERSONNEL.
!
To reduce the risk of fire or
CAUTION
RISK OF ELECTRIC
SHOCK. DO NOT OPEN.
TO REDUCE THE RISK
This symbol is intended to alert
you to the presence of uninsulated dangerous voltage within
the product’s enclosure that
might be of sufficient magnitude
to constitute a risk of electric
shock. Do not open the product’s case.
This symbol is intended to
inform you that important operating and maintenance instructions are included in the
literature accompanying this
product.
!
• Unplug the subwoofer’s power cord
from the electrical outlet if you do not
plan to use it for a long time.
• Only connect this unit to a power
supply of the type described in the
operating instructions or marked on
the subwoofer.
• Route the power-supply cord so it is
not likely to be walked on or pinched
by items placed upon or against it,
especially at plugs, convenience
receptacles, and the point where it
exits from the subwoofer.
• Placing the subwoofer on the same
stand or shelf as your turntable can
result in low frequency rumble or
acoustic feedback.
CCCCaaaauuuuttttiiiioooonnnnssss::::
• To prevent fire or shock, do not
expose this subwoofer to rain or
moisture.
• Do not place the subwoofer with its
metal plate against the floor.
SSSSAAAAFFFFEEEETTTTY
Y IIIINNNNSSSSTTTTRRRRUUUUCCCCTTTTIIIIOOOONNNNSSSS
Y Y
• Never open the cabinet or remove the
metal control panel, as this might
result in electrical shock or damage to
the subwoofer.
• If your subwoofer needs servicing,
contact your local RadioShack store.
• To prevent electrical shock, do not use
this polarized plug with an extension
cord receptacle or other outlet unless
the blades can be fully inserted to
prevent blade exposure.
• Place the subwoofer away from heat
sources such as radiators, stoves, or
other appliances that produce heat.
2
Loading...