RCA MAZQxxx User Manual

• Do not use the camcorder in water more than 3 meters (9.8 feet) or in water for more than 1
hour consecutively or water temperature exit 0 – 40 degree C.

• Do not open or close the card door in water.

• Do not use the camera in hot water, hot spring bath or etc.

• Do not apply excessive force to the camcorder. The camcorder may be damaged if you dive
into water with it.

• Do not leave the camera on sand, excess heat under sunlight may damaged the camcorder.

After using camcorder:

• Wash the camcorder immediately after used in sea or other outdoor activity, and then use
cloth to clean it and leave it dry.

• To wash sand, dirt or dust o the camera, rinse it under running tap water or wash it in a
bowl of fresh water for 2 to 3 minutes.

• Make sure to wipe any dirt or sand o the waterproof sealing material or its contacting
surface. Dirt or sand may scratch the material or the surface, making the camcorder less
resistant to water.

• Do not use any soapy water, mild detergents, alcohol or similar liquids to clean the
camcorder. They may make the camcorder less resistant to water.

• The waterproof sealing material is replaceable at cost. The material should be replaced once
a year to maintain the camera’s water resistance.

11. Waterproof precautions

Before using for outdoor activity:

• Make sure to close the card door securely without water, dust, hair or etc. between door
and cabinet.

• It may result in malfunction if water, dirt or sand gets inside the camcorder.

• Closing the card door: make sure to close the card door properly and ensure no space
between the cover and the cabinet before using.

Using camcorder outdoor:

• Do not open or close the card door near the sea, a lake or similar locations.

• Do not open or close the card door with wet hands or in wet environment.

• Before changing your memory card, make sure that the camcorder and your hands are
completely dry.

Connect the camcorder to your PC with the provided USB cable.

To install Memory Manager 3
Windows: Open My Computer and double-click the drive labeled SMALLWONDER. Double-
click MemoryMgr3_Windows_Installer.exe to start the installation.

Mac: Open the mounted volume labeled SMALLWONDER on the desktop. Double-

click the RCAMacInstallers.dmg disk image in the SMALLWONDER volume. Locate
the RCAMacInstallers volume on the desktop and Double-click on it. Double-click the
MemoryMgr3 Mac Installer  le in the RCAMacInstallers volume to start the installation. After
the Memory Manager 3 installation has completed, double-click the RCA Detective Installer
 le in the RCAMacInstallers volume to install the RCA Detective application.

Press and
hold until the
camcorder turns
on or o

PLAY/PAUSE DELETE

PHOTO

MENU/

Read the user manual for more information on the followings:

• Using the MENU button to setup the camcorder (including date and time)

• Viewing videos on TV

• Recording videos to VHS tape or DVD

• Connecting the camcorder to your PC

• Tips and troubleshooting

• Safety and warranty information

Visit http://store.audiovox.com to find the

best accessories for your products.

NOTE:

The unit is properly charging when you see the
animated charging symbol on the Camcorder
display.
If you do not see this charging symbol, follow these steps:

1. Make sure that you have the camcorder connected to
the AC/DC power adapter.

2. Press and hold MENU/ to initiate charging.

EZ4000 Series RCA Small Wonder Camcorder

www.mysmallwonder.com

Congratulations on purchasing your new RCA High De nition Small Wonder Camcorder.

Please read these instructions for quick tips on using the product.

The User Manual PDF  le can also be found in the camcorder memory under the User Manuals folder.

Please charge the battery for at least three hours before  rst use.

QuickStartGuide

1. Content of the box

• Small Wonder Camcorder

• AC/DC adapter

• USB cable

• AV cable

• Carrying case

• Wrist strap

• Quick Start Guide

• Owner Registration card

• Warranty lea et

2. Charging your camcorder

10. Learning more about the camcorder

• Use only the provided AC/DC adapter

3. General controls

Lens

Recording indicator
Microphone

Camcorder strap hole

* To reset the camcorder (in case it is not functioning properly):

Press and hold the On/o switch for more than 10 seconds.

7. Video recording and photo taking

PLAY/PAUSE DELETE

PHOTO

MENU/

PLAY/PAUSE DELETE

PHOTO

MENU/

1

2
3
4
5

Start, stop, resume recording in Preview mode; enter
Preview mode from other modes

Pause recording
Zoom in during recording
Zoom out during recording
Take photos

1

2

3

4

5

2

Actual recording time and capacity will vary depending on type of video content being recorded, system requirements,

and other factors.

Video recording indicator

8. Playing back or deleting recordings

1

2

3

5

4

1

2
3
4
5
6
7

Enter Playback mode to play the most recent recording;
start or pause playback

Adjust volume during playback
Cue to previous recording
Cue to next recording
Enter Preview mode from Playback mode
Press to select delete one or all recordings.
Enter Preview mode from playback mode; take photos

6
7

6. Selecting recording quality

Battery indicator

Memory card indicator

Selected recording quality

Settings

HD
Sports
WebQ

Resolutions (pixel) &
Frame Rates (FPS)

1440 x 1080 @ 30fps
848 x 480 @ 60fps
320 x 240 @ 30fps

Approx. recording durations
on a 16 GB memory card

2

5 hours
8 hours
40 hours

5. Turning on the camcorder

4. Inserting (or removing) memory card

The camcorder internal memory will only permit minutes of recording time. A microSD memory
card (not included) is recommended for recording.

As the memory card is small in size, it is recommended to use a small coin to help insert or remove it.

To insert card: Push the card in until a click is heard

To remove card: Push card in until a click is heard, then slowly

release the card. As card is under minimal tension when locked
in memory slot, please use care when removing.

Open the cover

To ensure that videos can be managed and played on your PC:

• Make sure to install the included Memory Manager application.

The camcorder has two operation modes (Preview and
Playback). It is always in Preview mode after switched on.
Refer to the diagram below for switching between modes.

Switch on

Auto timeout

Press PHOTO

Press PLAY/PAUSE

Playback mode

Press PHOTO /
Press Record

Preview mode

1

Take a photo

1

In Preview mode, press Record to start/stop video recording.

9. Installing RCA Memory Manager application

v1.0 (1.0.1.0) (EN/F/E)

English

© 2010 Audiovox Accessories Corporation

111 Congressional Blvd., Suite 350

Carmel, IN 46032

Trademark(s) ® Registered

Printed in China

1. Press MENU/

to show the camcorder

menu.

2. Press + or - to select Video Quality.

3. Press to enter and press + or – to
select from HD, Sports and WebQ.

4. Press to exit the current menu
option.

5. Press MENU/

to save settings and

exit the camcorder menu.

Delete
recordings
Tak e
photo

Playback/

pause

On/off switch/

Setup menu

Record

Audio

speaker

LCD screen

+/– – Adjust volume during playback/zoom during record and
preview

/ – Skip to previous or next recording; fast rewind or forward

AV output

HDMI video

output

USB

microSD
card slot

Lift up the
cover to access
the below
connectors

*The camcorder is waterproof. The supplied accessories are not waterproof.

QuickTime and the QuickTime logo are trademarks or registered trademarks of
Apple Computer, Inc., used under license therefrom.

Follow below steps to lift up the cover:

1

2

3

PLAY/PAUSE DELETE

MENU/

PHOTO