RCA LED55B55R120Q Owner's Manual

Part No.: RN0355B0103

English

LED LCD TV
User’s Manual

Model Number.
LED55B55R120Q

Please register your product at www.rca.com

Please keep your sales receipt and keep the record of
the serial number and the date of purchase in order to
receive warranty parts and service.
The serial number is located at the back of the TV.

Made for Today.

Child Safety Guide

1

Child Safety Guide

Use una montura que se ha recomendado por el fabricante de monitor
y/o listado por un laboratorio independiente (como UL, CSA, ETL).

Siga todas las instrucciones ofrecidas por el fabricante de monitor
y montaje de pared.

2

Table of Contents

Child Safety Guide ........................................................................................................................................

Caution and Warning

FCC Notice 5

.....................................................................................................................................................

Safety Precautions 6,7
Preparation for Your New TV

Check Accessories

Setup TV Table Stand

Select TV Location

Connection and Using

TV Stand Installation
TV Signal Connection 10
Cable Connections 11
Side Panel Connections

Connecting AV Composite Video device (Good Video Quality)
Connecting YPbPr Component device (Better Video Quality)
Connecting HDMI device (Best Video Quality)
Connecting a Computer
How to Obtain Various Kinds of Input Sources

TV Jacks Explanation
Back Keypad and Front Panel

Back Panel Buttons

Front Panel

.................................................................................................................................................

Remote Control Instructions

Inserting Batteries in the Remote

Remote Control Reception Angle

Learning about Remote Control

Initial Setup 20

...................................................................................................................................................

Basic Operations 21

Turning On and Off
Choosing TV Channel
Selecting Input Source
Adjusting TV Stand Angle
Channel Bar
Adjusting Volume
EPG (Electronic Program Guide)

...............................................................................................................................................

...................................................................................................................................

....................................................................................................................................

......................................................................................................................

......................................................................................................................................

..................................................................................................................................

......................................................................................................................................

..................................................................................................................................

....................................................................................................................................

..................................................................................................................................

......................................................................................................................................

.............................................................................................................................

........................................................................

..........................................................................

...............................................................................................

...............................................................................................................................

..............................................................................................

.................................................................................................................................

...................................................................................................................

......................................................................................................................................

......................................................................................................................

.................................................................................................................

.................................................................................................................

...............................................................................................................

..............................................................................................................................

.........................................................................................................................................

......................................................................................................................................

..................................................................................................................................

.................................................................................................................................

.............................................................................................................................

.......................................................................................................................................

.................................................................................................................

12

12
13
14
15
15

16

17

17

17

18

18

18

19

19Remote Control Buttons

21
21
21
21
22
22
22

1

5

8
8

8

8

8

9

3

Table of Contents

OSD Menu Operations

Adjust the OSD Screen

Picture Menu

Sound Menu

Channel Menu

Parental Menu

Setup Menu

Others Menu

.............................................................................................................................................

.............................................................................................................................................

...........................................................................................................................................

...........................................................................................................................................

.................................................................................................................................................

.............................................................................................................................................

..............................................................................................................................

..............................................................................................................................

Frequently Asked Questions (FAQs)
Troubleshooting
V-Chip Rating Explanations

US V-Chip Rating System
Canadian English Rating System
Canadian French Rating System

Wall Mounting Unit Specification
USB Media Play
Product Specification
Warranty Card

..........................................................................................................................................

.....................................................................................................................

...........................................................................................................................

.................................................................................................................

.................................................................................................................

.............................................................................................................

...........................................................................................................................................

..................................................................................................................................

...............................................................................................................................................

......................................................................................................

23

23

23

26

27

28

32

34

35

36

38

38
38
39

40

41

42

43

4

Caution and Warning

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Caution: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside.
Refer servicing to qualified service personnel.

The lightning flash with arrowhead
symbol, within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product enclosure
that may be of sufficient magnitude to
consitute a risk of electric shock.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.

CAUTION: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR
COMPLIANCE WITH THE FCC RULES COULD AVOID THE USERS AUTHORITY TO OPERATE THIS
EQUIPMENT.

The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and maintenance
(servicing) instructions in the literature
accompanying the TV.

FCC Notice

FCC Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio Communications. However, there is no Guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and the receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

5

Safety Precautions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water. For example, do not use near a laundry tub, in a wet basement, or near a swimming
pool, and the like.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Slots and openings in
the cabinet back or bottom are provided for ventilation, to ensure reliable operation of the TV and to protect it from
overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the TV
on a bed, sofa, rug, or other similar surface.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider
than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is
provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to
avoid injury from tip-over. A TV and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the TV and cart combination to overturn.

13. Unplug this apparatus during lightning storms or when unused for long periods of time. For added protection for this TV
receiver during a lightning storm, or when it is left unused for long periods of time, unplug it from the wall outlet and
disconnect antenna or cable system. This will prevent damage to the TV due to lightning and power line surges.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the
appratus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15. This TV should be operated only from the type of power supply indicated on the rating label. If customer is not sure the
type of power supply in your home, consult your appliance dealer or local power company. For TV remote control battery
power, refer to the operating instructions.

16. The TV set shall not be exposed to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on
the TV set.

17. Never push objects of any kind into this TV through openings as they may touch dangerous voltage or other electrical
parts that could result in fire or electric shock. Never spill liquid of any kind into the TV.

18. Unplug the TV from the wall outlet before cleaning. Do not use liquid or aero cleaners. Use a damp cloth for cleaning.

19. This TV should never be placed near or over a radiator or heat resource. This TV should not be placed in a built-in
installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been
adhered to.

20. Do not place this TV on an unstable cart, stand, tripod, bracket, or table. The TV may fall, causing serious injury to
someone, and serious damage to the appliance.

21. Do not attempt to service this TV by yourself because opening or removing covers may expose you to dangerous high
voltage or other hazards. Refer all servicing to qualified service personnel.

22. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.

6

Safety Precautions

23. WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the
installation instructions.

24. To reduce the risk of electric shock, the grounding of center pin of plug must be maintained.

25. If an outside antenna or cable system is connected to the TV, be sure the antenna or cable system is grounded to provide
some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code,
ANSI/NFPA NO.70, provides information with respect to proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge
unit, connection to grounding electrodes, and requirements for the grounding electrodes. (See figure A.)

ANTENNA
LEAD IN
WIRE

GROUND CLAMP

ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)

GROUNDING CONDUCTORS
(NEC SECTION 810-21)

GROUND CLAMPS

ELECTRIC SERVICE
EQUIPMEN T

POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PARTH)

Figure A

Safety Strap

Caution: Pushing, pulling or climbing on the TV may cause the TV falling. Do not let chlidren climb or hang on the TV.
Always place the TV on a sturdy, level, stable surface that can hold the weight of TV. And if possible, secure the TV
according to the instruction below (Note: The fastening components such as screws are not supplied with TV).

Step one: Insert the M6 mounting screws into the upper two wall mounting screw holes and fasten them (Figure B).
Step two: Insert anchors to wall and connect the bolts and anchors with ropes or chains (Figure C).

Wall

M6 Screws

Figure B Figure C

7

Preparation for Your New TV

Before Turning On TV

Check Accessories

Check the accessories that are packed with your TV.

REMOTE CONTROL

PART NO.: RE20QP80

AAA BATTERIES

TV STAND SCREWS

MACHINE
SCREW

.

CH LIST

M4 x 10mm, 4pcs
Part# RS01TM410H

TAPPING
SCREW

M4 x 12mm, 4pcs

Please register your product at www.rca.com

Please keep your sales receipt and keep the record of
the serial number and the date of purchase in order to
receive warranty parts and service.
The serial number is located at the back of the TV.

LED LCD TV
User’s Manual

Model Number.
LED55B55R120Q

Part# RS01TB412H

PICTURE

SOUND

TV STAND BASE TV STAND NECK

Setup TV Table Stand

Please refer to TV Stand Installation guide in next page to carry out stand installing.

Part No.: RN0355B0103

English

CHLIST

.

PICTURE

SOUND

DOCUMENTS

USER’S
GUIDE

Remote Control Guide

Program Your Universal Cable
or Satellite Remote Control to
Operate Your New RCA TV!

If you would like to program your other
household remote controls to your new RCA
television, please consult the User’s Manual
supplied by your Cable or Satellite provider.
The Cable or Satellite providers’ User’s Manuals
should include instructions on how to program
their remote to your television.

Below is a list of RCA codes for the most
common Cable and Satellite providers.
Use the RCA code that is associated with your
Cable or Satellite provider (if applicable).

DIRECTV.........................0178,10178

Time Warner Cable...........0178,0178

Comcast..................................10178

Cox Communications.................0178

Dish Network.............................627

Fios Verizon.....0205,0057,0493,0775

If the RCA code associated with your Cable or
Satellite provider is not listed above, if the code
above does not work, or if you can not locate the
instructions for programming your household
remote to your television, call your local Cable or
Satellite provider’s customer service center.

This is for U.S. customers

Quick Start Guide

QUICK START

GUIDE

REMOTE CONTROL

GUIDE

Select TV Location

Select a flat, stable table to place your TV set. Please follow the Safety Instructions when placing the TV.

Connection and Using

After placing your TV properly, you can connect the TV with power supply and cable components. For further information, see page
12 to page 15.

8

Note: Above accessories are subject to change without notice.

TV Stand Installation

TV LED55B55R120Q is packaged with the TV stand separated from the cabinet. To setup the TV table stand, please carry
out the installation according to the instructions below.

Step One

Place the TV faced down on a soft cloth or cushion to prevent the
panel from being damaged.

The panel can be scratched easily, so please:

1. Choose an absolutely flat surface to place the TV on.

2. Use soft cloth or cushion to face the TV panel.
Do not put TV on the table directly.

Always unplug the AC cord first when installing/removing
the stand.

Step Two

Insert the neck into the opening on the bottom of the TV, and
then insert the 4 screws into the 4 holes on the neck and
tighten them.

Pedestal Screws Quantity Part #

4pcsM4 x 10mm

RS01TM410H

Step Three

Take the base. Please align four holes of the base and four
screwholes of the neck, insert the base to the neck, and then
insert the 4 screws and tighten them.

Pedestal Screws Quantity Part #

4pcsM4 x 12mm

RS01TB412H

9

TV Signal Connection

The first step in connecting your TV is obtaining the signal. Your TV LED55B55R120Q has a side panel, which allows you to receive
analog and/or digital television channels via ANT/CABLE jack.

Before connecting your TV, determine using an antenna or a cable service to obtain the signal.

A. Antenna

Connect the antenna to TV via coaxial cable on ANT/CABLE jack of the side panel. You are ready to receive air local digital and
analog channels.

B. Cable TV service

Connect the cable TV wall jack to TV via coaxial cable on ANT/CABLE jack of the side panel. You are ready to receive off-air local
digital and analog channels.

C. Set-Top Box

If you use a set-top box, you may need to call your cable company or satellite service provider, which use a special connection,
please refer to the user’s guide of set-top box.

Note: Do not plug the AC cord until you have accomplished all the connections.

AC

100-120V

60Hz

ANT/

CABLE

AC Power Cord
(Connect after all the other connections are done.)

Antenna Cable TV

WALL
OUTLET

Or

10

Cable Connections

Choose Your Connections

TV LED55B55R120Q supports various connections to other devices (such as DVD, VCR, Set-top box, etc.). Please follow the table
to choose the cables which adapt to your device.

Jacks Cables Further Information

Go to page 12

AV IN VIDEO, R-AUDIO-L

COMPONENT IN Y, Pb, Pr

R-AUDIO-L

HDMI IN 1/DVI, 2, 3, 4

Video/Audio cable

Audio Cable

Go to page 13

COMPONENT video cable

HDMI-DVI cable

Go to page 14

HDMI cable

Audio cable with 3.5mm terminal

Go to page 15

PC SOUND/DVI

VGA

Note:

HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC

Caution:

Unplug the AC cord when you connect other devices to TV.

VGA cable

11

Side Panel Connections

Connecting AV Composite device (Good Video Quality)

To connect a composite AV device, such as a DVD player, follow these steps:

1. Connect the VIDEO jack on the back of TV to the video output jacks of device via video cable (yellow).

2. Connect the R-AUDIO-L jacks on the back of TV to the audio output jacks of device via audio cable.

Notice the left channel jack and plugs are white and the right channel jack and plugs are red.

Note: AV signal belongs to composite video. This kind of video signal has regular good display quality.

Composite Video Connection

The picture below is an example of a connection using the composite video jack.

The back of TV

HDMI

Video

Audio

L R

Audio

L R Y Pb Pr

12

The output panel of other device

Side Panel Connections

Connecting YPbPr Component device (Better Video Quality)

To connect a component device, such as a DVD player, follow these steps:

1. Connect the COMPONENT IN Y/Pb/Pr jack on the side of TV to the video output jacks of device via video cable (green,
blue and red).

2. Connect the AUDIO IN R-AUDIO-L jacks on the side of TV to the audio output jacks of device via audio cable.

Notice the left channel jack and plugs are white and the right channel jack and plugs are red.

Note: Y/Pb/Pr jacks are component video. This kind of video signal has better display quality.

Component Video Connection

The picture below is an example of a connection using the component video jack.

The back of TV

HDMI

Audio

L R

Video

Audio

L R

Y Pb Pr

The output panel of other device

13

Side Panel Connections

Connecting HDMI device (Best Video Quality)

To connect a HDMI device, such as a DVD player, please Connect the HDMI 1/DVI, 2, 3, or 4 jack on the back of TV to

the output jacks of device via HDMI cable.

To connect a DVI device, such as a computer via DVI port of PC and HDMI jack of TV:

1. Connect the HDMI 1/DVI, 2, 3, or 4 jack on the back of TV to the DVI port of PC via HDMI-DVI cable.

2. Connect the SOUND/DVI jack on the side of TV to the audio output jack of computer with audio cable (3.5mm stereo jack).

To connect a DVI device, other AV device via DVI port of device and HDMI jack of TV:

1. Connect the HDMI 1/DVI, 2, 3, or 4 jack on the back of TV to the DVI port of device via HDMI-DVI cable.

2. Connect the SOUND/DVI jack on the back of TV to the audio output jack of device with audio cable (dual-channel RCA
jacks to 3.5mm stereo jack).

Note: 1. HDMI (High-Definition Multimedia Interface) is a compact audio/video interface for transmitting uncompressed digital
data. It carries the audio and video signal via the same cable and has the best display quality.

2. HDMI-DVI cable transfers only video signal from DVI port of DVI device to HDMI jack of TV. For audio signal, please
connect audio output to SOUND/DVI on TV back panel.

HDMI Connection

The picture below is an example of a connection using the HDMI video jack.

The back of TV

Video

Audio

Audio

L R Y Pb Pr

L R

HDMI

The output panel of HDMI device

DVI

Speaker or

headphone

PC

DVI

14

L R

Audio Out

The output panel of other AV device

Side Panel Connections

Connecting a computer

To connect a computer, follow these steps:

1. Connect the PC INPUT VGA port on the back of TV to the VGA output jack of device via D-sub 15-pin cable.

2. Connect the SOUND/DVI jack on the back of TV to the audio output jack of computer with audio cable (3.5mm).

Note: If you want to use your TV as a monitor, please notice that the maximum resolution for LED55B55R120Q is 1920*1080.
Please set the computer graphic correctly.

PC Connection

The picture below is an example of a connection using your TV as a PC monitor.

VGA

The back of TV

Speaker or

headphone

PC

How to Obtain Various Kinds of Input Sources

After connection is done, press INPUT button on remote control or TV top panel to choose the input source you need.
See page 21, Basic Operation of TV.

15

TV Jacks Explanation

USB

DIGITAL AUDIO OUT:
SOUND/DVI: Use to obtain sound when a PC is connected to TV. Use 3.5mm stereo mini-pin

cable to connect PC to TV.

ANT/CABLE: Connect to receive the signal from your antenna or cable via coaxial cable.
PC INPUT VGA: Connect your computer or other device with a VGA output to this jack using a 15-pin,

D-sub cable.
COMPONENT IN Y/Pb/Pr, R-AUDIO-L: Connect a device that has component video jacks, such as a DVD
player. To access device connected to the Y/Pb/Pr jack, press the INPUT button on your remote; then press
the up/down arrow to select Component. Press the ENTER button at last to confirm.

• Y/Pb/Pr (Component Video): They provide good picture quality because the video signal is separated

into three components. Use three video-grade or component video cables for the connection. When using
Y/Pb/Pr, make sure you connect left and right audio cables to the Audio L and Audio R jacks.

Note:

The VIDEO (AV), COMPONENT IN input (Y, Pb, Pr) share the same audio input jacks R-AUDIO-L.

AV IN VIDEO, R-AUDIO-L: Connect an AV device that has composite video jacks, such as a VCR
or a DVD player. To access device connected to these jacks, press the INPUT button on your
remote; then press the up/down arrow to select AV. Press the ENTER button at last to confirm.

• AUDIO-L: Left audio channel connection. The left audio connector is usually white. For mono audio sources, be sure
to use the left AUDIO INPUT.

• AUDIO-R: Right audio channel connection. The right audio connector is usually red.

AUDIO OUT:

Note:

HDMI IN 1/DVI, 2, 3, 4: (High-Definition Multimedia Interface) It provides an uncompressed digital connection that carries
both video and audio data by way of an integrated mini-plug cable.

USB: Connect your USB storage device to enjoy music/photo files on your TV. (Also used for service purpose)
HEAD PHONE:

Connect double-channel coaxial cables for analog audio output.

DIGITAL AUDIO OUT and AUDIO OUT are supposed to be connected to audio power amplifier, which provides
smoother and more powerful sound performance.

Connect a coaxial cable for digital audio output.

Connect a 3.5mm headphone for personal audio.

16

Back Keypad and Front Panel

Back Keypad Buttons

If you cannot locate your remote, you can use the keypad buttons on your TV to operate many TV features.

CH VOL

I

NP
UT

INPUT:

Displays the Source Select List.

MENU: Displays the TV Main Menu.

CH : Scans up through the channel list. In the TV menu system, it acts like the up arrow on the remote control and

can be used to select menu options.

CH : Scans down through the channel list. In the TV menu system, it acts like the down arrow on the remote control

and can be used to select menu options.

VOL+: Increases the volume. In the TV menu system, it acts like the right arrow on the remote control and can be used

to select menu options.

VOL-: Decreases the volume. In the TV menu system, it acts like the left arrow on the remote control and can be used

to select menu options.

POWER ( ): Turns the TV on and off.

Front Panel

About remote control working distance and angel, see page 18.

Power/Standby Indicator: Light up in red when the TV is in standby mode. Light out when the TV is on.
Remote Control Sensor: Remote control IR sensor, which receives infrared ray sent by remote control.

Remote Control Sensor

Power/Standby Indicator

17

Remote Control Instructions

Inserting Batteries in the Remote

• Remove the cover of battery cabin on the back of the remote control by lifting the cover.

• Insert two AAA batteries, making sure the polarities (+ and -) are aligned correctly.

• Place the cover back.

If the remote control does not work, check these points:

• Are the polarities (+, -) correct?

• Are the batteries worn out?

• Is there an AC power failure?

• Is the power cord plugged in?

• Is there any interference or block near the remote

control sensor?

CAUTION:

• Used batteries should be recycled.

• Keep out of children’s reach.

• DO NOT use new and old batteries together.

• Change both the batteries at the same time.

• When not using the remote control for a long time,

remove the batteries from the unit.

Remote Control Reception Angle

Use your remote control within the distance and angle range shown below.

Universal Remote Control Code List

For Universal Remote Control brands listed below, please
use accompanying codes and refer to your Universal
Remote Control User Manual for basic Instruction
for changing TV code to operate the TV model.

20 feet

Codes for DIRECTV: 0178, 10178
Codes for Time Warner Cable: 0178, 10178
Codes for Cox Communications: 0178
Codes for Comcast: 10178
Codes for Dish Network: 627
Codes for Fios Verizon: 0205, 0057, 0493, 0775

18

Learning about Remote Control

Remote Control Buttons

MUTE ( ): Reduces the TV volume to its minimum level. Press again to restore the volume.

POWER ( ): Turns the TV on or off.

CH.LIST: Displays the channel list.
FAV.: Adds the current channel to your favorite list, or erases the current channel from

your favorite list (if this channel is a favorite channel already).

FAV.+ or FAV.- :

Numeric Buttons: Use these buttons to enter numbers.

To enter a digital channel with a sub-channel, enter the main channel; then, press this

“ ”:

button to enter the sub-channel and press ENTER.

Recall ( ): Returns to the previous channel.
EPG: Shows Electronic Program Guide (see page 22).

INPUT: Accesses the available input channels (TV, AV, Component, HDMI 1/2/3/4, PC, Media).

Use the arrows to highlight options, and press ENTER to select.

Arrows ( / / / ): Uses the four arrows to highlight different items in the TV menu or

ENTER: Enter and confirm button.

MENU: Accesses the Main Menu, or return to the upper level of a sub-menu.

DISPLAY: Displays the Channel Bar (see page 22).
EXIT: Exits the current menu or function.

VOL+ or VOL-: Increases or decreases the TV volume.

CH or CH : Scans up or down through the current channel list. Press once to change

PICTURE: Switches between the preset picture mode (see page 23).

SOUND: Switches between the preset sound mode (see page 26).
SLEEP: Selects the sleep timer, after which the TV will shut off automatically.

ASPECT: Switches between the preset screen size mode (see page 24).

CC: Selects the closed caption.

MTS: Selects the multi-channel television sound.

Scans up or down through the current favorite channel list.

change the value. The up/down arrow can also work as CH /CH

button, and the left/right arrow can also work as VOL-/VOL+ button.

Freeze the current screen frame, press again to return to normal.FREEZE :

the channel up or down; press and hold to continue changing channels.

.

CH LIST

PICTURE

SOUND

NOTE :

The keys not listed are for DVD control, they are not available for this TV model.

Remote control part number RE20QP80

19

Initial Setup

If it is the first time you turn on your TV, or you have done Clear Channel List option (see page 31), the initial setup menu appears
automatically.

Initial Setup

Initial Setup Wizard will assist you in configuring

basic Settings

Next

Press ENTER/RIGHT to go to next page

MOVE

SELECT

: Exit

Initial Setup

Please select Menu Language

English

Spanish

French

Press ENTER/RIGHT to go to next page, MENU to
return previous page, UP/DOWN to select

MOVE

Execute

Execute

Execute

SELECT

Please select Home mode if you are installing

Home

Retail

Press ENTER/RIGHT to go to next page, MENU to
return previous page, UP/DOWN to select

: Exit

MOVE

Initial Setup

this TV at home

SELECT

Execute

Execute

Please choose between Energy Saving and

Dynamic mode. You can save more energy with

Energy Saving

Dynamic

Press ENTER/RIGHT to go to next page, MENU to
return previous page, UP/DOWN to select

: Exit

MOVE

Initial Setup

Energy Saving

SELECT

Execute

Execute

Air

Cable

Press ENTER/RIGHT to go to next page, MENU to
return previous page, UP/DOWN to select

: Exit

Step One

Please select Menu Language, press the up/down arrow select the language you need.
Available languages: English, Spanish and French.

Step Two

Please select the TV installation mode, press the up/down arrow select the mode you need: Home, Retail.
If you select Home mode, the next option is step three. If you select Retail mode, please refer the step four.

Step Three

Please choose between Energy Saving and Dynamic mode. You can save more energy with Energy Saving.

Step Four

To choose your TV tuner signal type, press the up/down arrow select the signal type: Air, Cable.
Note: please select TV signal type according to the antenna or cable closed circuit TV you use.

Signal Type

Please select your channel scan type

Execute

Execute

MOVE

SELECT

: Exit

Step Five

If you accomplish the initial setup, the TV will search channels automatically.

PICTURE SOUND CHANNEL PARENTAL SETUP OTHERS

PICTURE SOUND CHANNEL PARENTAL SETUP OTHERS

AUTO CHANNEL SEARCH

Now Searching... Please Wait...

Return

Analog Channels Found: 1

Digital Channels Found: 0

3%

Press MENU to skip analog signal scanning and
ENTER/EXIT to exit

MOVE

SELECT

: Exit

What to notice:

1. The channel search access starts from the Analog TV channel searching and ends at Digital TV channel searching.

2. The channels that have been found will be stored automatically.

3. You can press MENU button to skip analog/digital channel searching.

4. You can press ENTER/EXIT button to end the channel searching.

20

Basic Operations

Turning On and Off

Connect the AC cord to power the LED LCD TV. At this time the TV will enter standby mode and power indicator will turn red.
Use Power button ( ) on the top panel of TV or on the remote control to turn on the TV. After switching off the TV for 5 seconds,
you can turn on TV again.

Choosing TV Channel

Tuning To Analog Channels

An analog channel has a channel number beginning with “A”. Input the digital number with numeric buttons directly and press
ENTER button to confirm.
For example, to watch analog channel “A51”, press “5”, “1”, “ENTER” on remote control in sequence.

Note: Although there is no analog TV signal available in America, we reserve ATV functions for some expansible use.

Tuning To Digital Channels

A digital channel has a channel number beginning with “D”. Input the main digital number with numeric buttons directly, then press
“ ” button on remote control, and input the sub number at last.
For example, to watch analog channel “D31-1”, press “3”, “1”, “ ”, “1”, “ENTER” on remote control in sequence.

Changing Channels Directly

You can use CH button to increase channel number and CH to decrease channel number. When no OSD (On Screen
Display) is used, the up/down arrows can also work as CH /CH buttons.

Selecting Input Source

Source Select

TV
AV

Component

HDMI 1
HDMI 2
HDMI 3
HDMI 4

PC

Media

Press INPUT button on remote control to display Source Select list.
Use up/down arrows to highlight the source you need and press ENTER to confirm.

Adjusting TV Stand Angle

The TV cabinet can manually adjust to left or right for 30 degrees from the center.

You can adjust the angle for the best viewing effect and comfort.

21

Basic Operations

Channel Bar

Press the DISPLAY button on the remote control, the channel bar will appear on the top right corner of the screen. It displays the

current channel’s information. T

he following list describes the items on the channel bar.

Air

Oct-31 23.14 Mon

ATV DTV

A2/D50-1

MTV/KOCE-HD

Mono/English Displays whether the current channel is being broadcasted in stereo or mono. If the current channel is digital,

480i/1080i Displays the signal resolution.

16:9/CC/TV-PG Displays the screen aspect ratio, closed caption and TV rating level of the current program or channel.

Oct-31 23:14 Mon Displays current date and time.

If the channel is analog, A is displayed. If it’s a digital channel, D is displayed. For example, in the pictures

above, A2 is an analog channel, and D50-1 is a digital channel ( -1 is a sub-channel number).

Displays the channel label.

this space will be SAP (Second Audio Program) language.

These are only available for digital channels.

A2

Mono

Air

TV

480i

D50 - 1

KOCE-HDM

English

1080i

Oct-31 23:14 Mon

Adjusting Volume

Press the VOL+/VOL- button on the remote control to adjust the volume. If you want to switch sound off, press MUTE ( ).

When OSD (On Screen Display) is not used, the arrows left/right can also work as VOL-/VOL+ buttons.

EPG (Electronic Program Guide)

Press EPG button on the remote control, the electronic program guide will appear in the center of screen.
The electronic program guide gives the TV program playing project. You can use left/right arrows to switch pages.

D50 - 1

KOCE-HD

Smart Travels - Pacific Rim with Rudy Maxa

23 : 00 - 23 : 30
Stockholm & Sweden is a natural-born beauty, winning us over with

luxuriant landscapes and sleek Scandinavian style. We cruise through Stockholm’s
sun-dappled archipelago, visit a designer hotel and sip cocktails in the trendy Ice Bar
(a lounge...

MEN U

:Return

:Page

22

Page 1/2

OSD Menu Operations

Adjust the OSD Screen

The OSD (On Screen Display) menu enables you to approach to the TV functions.

To use OSD menu system, press MENU button on remote control, then use left/right arrow to highlight an option from PICTURE,
SOUND, CHANNEL, PARENTAL, SETUP or OTHERS and press ENTER/down button.

Press the up and down arrow to move to a different option within each menu. If necessary, press ENTER or right arrow to display
the choices of the option you’ve highlighted. If available, use the text at the bottom of each screen for help. To return to the

previous menu, press the MENU button.

To exit the OSD menu:

PICTURE SOUND CHANNEL PARENTAL SETUP OTHERS

• Press the EXIT button. The menu will clear from the screen.

• Press the MENU button repeatedly until the menus disappear.

Picture Menu

The Picture Menu contains menus and controls to configure the way the picture appears. The Picture Menu options apply to the
video for the main TV and VIDEO INPUT selections. All picture options can be applied to each input.

Press MENU on the remote. Select Picture from the Main menu. Press the ENTER/down button to proceed to PICTURE menu.

SOUND CHANNEL PARENTAL OTHERSSETUPPICTURE

PICTURE

Picture Settings

Screen Size

PC Settings

Color Temperature

Advanced Picture Settings

Adjust settings to affect picture quality.

MOVE

SELECT

Wide

Warm

: Exit

Use up/down to choose the function you need, press
ENTER or right arrow to adjust or enter a sub-menu. The
sub-menu image and explanation are shown below.

If available, use the text at the bottom of each screen for
help.

Picture Settings

SOUND CHANNEL PARENTAL OTHERSSETUPPICTURE

PICTURE SETTINGS

Picture Mode Standard

Brightness

Contrast

Color

Tint

Sharpness

Adjust picture mode to change picture
appearance.

MOVE

SELECT

Picture Mode: Choose the preset visual mode of your
TV: Standard, Movie, User, Dynamic, Power Saving.
(Only in User mode you can adjust Brightness, Contrast,

50

50

50

0

50

Color, Tint and Sharpness. Changes to Power Saving
mode can decrease the power consumption.）

• Brightness: Adjust the brightness of picture.

• Contrast: Adjust the contrast of color.

• Color: Adjust the richness of color.

• Tint: Adjust the balance between red and green level

: Exit

(only available in NTSC signal).

• Sharpness: Adjust the sharpness level of picture.

23

OSD Menu Operations

Screen SizeScreen Size

SOUND CHANNEL PARENTAL OTHERSSETUPPICTURE

PICTURE

Picture Settings

Screen Size

PC Settings

Color Temperature

Advanced Picture Settings

Adjust settings to affect picture quality.

MOVE

PC Settings (only available in PC mode)

SOUND CHANNEL PARENTAL OTHERSSETUPPICTURE

PC SETTINGS

Auto Adjust Execute

Horizontal Position

Vertical Position

Clock

Phase

Reset Execute

SELECT

Wide

Warm

Screen Size: Select a screen aspect ratio.

(Available ratio: Wide, Cinema, Zoom, and Normal.)

Please choose the ratio that applies to your video
signal format best.

: Exit

• Auto Adjust: Adjust the PC picture display automatically.

• Horizontal Position: Adjust the horizontal position of picture.

• Vertical Position: Adjust the vertical position of picture.

-5

• Clock: Adjust the clock of picture.

0

• Phase: Adjust the phase of picture.

0

19

• Reset: Reset all the PC picture settings to factory default.

Adjust to the PC signal timing automatically
when ON.

MOVE

SELECT

: Exit

Color Temperature

This option allows you to select one of three automatic color adjustments: Cool for a bluer palette of picture colors; Normal or

Warm for a redder palette of color.

Advanced Picture Settings (not available in PC mode)

SOUND CHANNEL PARENTAL OTHERSSETUPPICTURE

ADVANCED PICTURE SETTINGS

Dynamic Contrast Off

Film Mode

Noise Reduction

MPEG Noise Reduction

MFC Effect Medium

MFC Demo Off

Moderate contrast ratio between bright and dark
areas of picture.

MOVE

SELECT

Off

Low

Off

: Exit

24

OSD Menu Operations

Dynamic Contrast, Film Mode, Noise Reduction

Set dynamic contrast as Off/Low/Medium/High. Set film mode on/off. Set noise reduction as Off/low/Medium/High.

MPEG Noise Reduction

Set MPEG noise reduction as Off/low/Medium or High.
Note: Noise reduction helps to reduce the picture “static” or any type of interference. This feature is especially useful for
providing a clearer picture in weak analog signal conditions. The MPEG Noise Reduction specifically works on video signal
with MPEG coding.

MFC Effect (Motion Flow Compensation Effect)

SOUND CHANNEL PARENTAL OTHERSSETUPPICTURE

ADVANCED PICTURE SETTINGS

Dynamic Contrast Off

Film Mode

Noise Reduction

MPEG Noise Reduction

MFC Effect Medium

MFC Demo Off

Moderate contrast ratio between bright and dark
areas of picture.

MOVE

SELECT

Off

Low

Off

MFC Effect: Set MFC Effect as Off/Low/Medium/High.

MFC Effect technology removes drag from fast scenes
with a lot of movement to provide a smoother picture.
Off switches the MFC Effect off, High provides smoother
effect, Low provides smooth effect, Medium sets MFC
Effect to medium.

: Exit

MFC Demo (Motion Flow Compensation Demo)

Set MFC Demo On/Off. It shows the difference between MFC Effect on and off modes on the screen.
The screen shows as picture given below when sets MFC Demo on:

Off On

Left side: Set MFC Effect Off
Right side: Set MFC Effect On (Provides smoother picture movement)

25

OSD Menu Operations

Sound Menu

The Sound Menu lets you adjust audio output. To access the Sound Menu, press MENU on the remote, and then select SOUND

from the Main Menu. Press ENTER/down button to proceed to SOUND menu.

SOUND CHANNEL PARENTAL OTHERSSETUPPICTURE

Sound Settings

SOUND CHANNEL PARENTAL OTHERSSETUPPICTURE

Sound Settings

Surround Mode

Auto Volume

Analog Sound Stereo

Digital Sound

Digital Audio Output

Equalizer Settings

Adjust settings to affect sound quality.

SOUND

English

MOVE

SELECT

SOUND SETTINGS

Sound Mode Standard

Bass

Treble

Balance

Select a sound mode to achieve ideal sound.

MOVE

PCM

: Exit

SELECT

Use up/down to choose the function you need, press

ENTER or right arrow to adjust or enter a sub-menu. The

sub-menu image and explanation are shown below.

• Sound Mode: Choose the preset sound mode of your

TV: Standard, Soft, User, Dynamic. Only in User mode

you can adjust Bass, Treble, Balance.

0

• Bass: Adjust the bass component of TV sound.

0

• Treble: Adjust the treble component of TV sound.

0

• Balance: Adjust the balance between the left and right
channel.

: Exit

26

Surround Mode

Creates a 3D sound surround from standard stereo material, with deep and rich enhancement.

Auto Volume

Set auto volume control on/off.

Analog Sound

Select analog TV audio sound type: Stereo, Mono or SAP (only available in TV mode).

Digital Sound

Select digital TV audio language type: English, French or Spanish (only available for DTV channel).

Digital Audio Output

Set the audio output type as Off, PCM or Raw. Please set this option according to your power amplifier.

OSD Menu Operations

Equalizer Settings

SOUND CHANNEL PARENTAL OTHERSSETUPPICTURE

EQUALIZER SETTINGS

Mode Off

0

The seven-band graphic equalizer allows you to adjust
the audio frequency settings. You can select one of the
equalizer presets (Off, Pop, Rock, Jazz) or create your
own personal preset (User).

1000250050001K02K04K010K

Press Left/Right to choose equalizer mode

MOVE

SELECT

: Exit

Press the left or right arrow to select the frequency
(100Hz, 250Hz, 500Hz, 1KHz, 2KHz, 4KHz, 10KHz)
you want to adjust. Use the up or down arrow to adjust.

Channel Menu

The Channel Menu enables you to search, view and edit channels. It is available in TV mode only.
Press MENU and choose CHANNEL from the Main menu. Press the ENTER/down button to proceed to CHANNEL menu.

SOUND CHANNEL PARENTAL OTHERSSETUPPICTURE

CHANNEL

Channel List

Favorite List

Channel Settings

Signal Type

Auto Channel Search

Adjust channel options.

MOVE

SELECT

Air

Execute

: Exit

Channel List

Displays a channel list. It shows the current channels.

Use up/down to choose the function you need, press

ENTER or right arrow to adjust or enter a sub-menu. The

sub-menu image and explanation are shown below.

Favorite List

Displays a favorite channel list. It shows the current favorite channels.

Channel Settings

Go to channel setting sub-menu (as shown below).

SOUND CHANNEL PARENTAL OTHERSSETUPPICTURE

CHANNEL SETTINGS

Channel

A2

A4

D50-1

D50-2

D50-3

Adjust parameters

MOVE

SELECT

LabelSkip Favorite

KOCE-HD

KOCE-SD

KOCE-LB

Page 1/1

: Exit

Enter a channel label to rename the current channel.

Set if the current channel is the favorite channel.

Set if the current channel is skipped.
Press up/down arrow to switch the channel you want

to edit.

27

OSD Menu Operations

Signal Type

Select your TV signal type: Air or Cable.

Auto Channel Search

Execute an auto channel search (see page 20).

Parental Menu

The Setup Menu enables you to lock program with special content, panel key board and input source.
Press MENU and choose PARENTAL from the Main menu. Press the ENTER/down button to proceed to PARENTAL menu.

SOUND CHANNEL PARENTAL OTHERSSETUPPICTURE

PARENTAL CONTROL

Lock Parental Control

V-Ch ip
Chan ge Password

Remo te
Keyp ad Lock
Sour ce Lock
Clea r Channel List

Set TV parental controls.

MOVE

SELECT

: Exit

Lock Parental Control

• When the Parental Control Menu is accessed from the Main Menu, you need to enter password to unlock the menu function.

Please enter your four-digit password with numeric keys 0~9.

Note: The original password is “0000”.

• After unlocking, the items in parental control menu can be used. Use arrow up/down to highlight the function you need and

press ENTER or right arrow to use V-chip, Change Password, Keypad Lock and Source Lock, Clear Channel List sub-menu.

V-Chip

Press ENTER or right arrow to enter V-chip sub-menu, the detail as follow:

SOUND CHANNEL PARENTAL OTHERS SETUPPICTURE

MOVE

V-CHIP

SELECT

: Exit

US V-Chip
Canada V-Chip
Block Unrated Show

Downloadable Rating
Clear Downloadable Da ta

Restrict movie and TV programs by US Ratings.

28

US V-Chip

Press ENTER or right arrow to enter US V-Chip ratings menu, which contains two sub-menus: Movie Rating and TV rating.

See next page for more details.

OSD Menu Operations

Movie Rating

SOUND CHANNEL PARENTAL OTHERSSETUPPICTURE

Press ENTER to confirm, MENU to return previous
page, UP/DOWN to select

TV Rating

SOUND CHANNEL PARENTAL OTHERSSETUPPICTURE

TV-Y

TV-Y7

TV-G

TV-PG

TV-14

TV-MA

G

PG

PG-13

R

NC-17

X

MOVE

MOVIE RATING

SELECT

TV RATING

L S V FV

D

Use arrow keys to select the rating level you want to
block, press ENTER to lock/unlock the rating level. If
you have blocked a lower level rating, the higher ratings
will be blocked too.

For example, when PG-13 is blocked, R, NC-17 and X
will be blocked at the same time.

: Exit

Similar with Movie Rating.

Press ENTER to confirm, MENU to return previous
page, UP/DOWN to select

MOVE

SELECT

: Exit

After adjusting, press MENU to return or press EXIT to exit the menu.

TV Rating Overview

Age-Based Ratings

TV-MA Mature Audience Only

TV-14 Parents Strongly Cautioned

TV-PG Parents Guidance Suggested

TV-G General Audience

TV-Y7 Directed to Children 7 Years and Older

TV-Y All Children

Content Themes

D Sexually Explicit Dialogue

L Adult Language

S Sexual Situations

V Violence

FV

Fantasy Violence

For more rating explanation, see page 38.

29

OSD Menu Operations

Canada V-Chip

Press ENTER or right arrow to enter US V-Chip ratings menu, which contains two sub-menus: English Rating and French Rating.

English Rating

Press ENTER or right arrow to enter English rating menu.

SOUND CHANNEL PARENTAL OTHERSSETUPPICTURE

ENGLISH RATING

C

C8+

G

PG

14+

18+

Press ENTER to confirm, MENU to return previous
page, UP/DOWN to select

MOVE

SELECT

: Exit

Use arrow keys to select the rating level you want
to block, press ENTER to lock/unlock the rating
level. If you have blocked a lower level rating,
the higher ratings will be blocked too.

For example, when PG is blocked, 14+ and 18+
will be blocked at the same time.

French Rating

Press ENTER or right arrow to enter French rating menu.

SOUND CHANNEL PARENTAL OTHERSSETUPPICTURE

FRENCH RATING

G

8 ans+

13 ans+

16 ans+

18 ans+

Press ENTER to confirm, MENU to return previous
page, UP/DOWN to select

MOVE

SELECT

Block Unrated Show

Block all the unrated program.

Downloadable Rating, Clear Downloadable Data

Activate or downloadable rating data. if available.

Similar with English Rating.

Note: These ratings are

available only if the

broadcaster is sending

rating information.

: Exit

30

OSD Menu Operations

Change Password

Change the password of parental menu.

SOUND CHANNEL PARENTAL OTHERSSETUPPICTURE

Old PIN

New PIN
Confirm

Input 4-digit password

Remote

SOUND CHANNEL PARENTAL OTHERSSETUPPICTURE

Lock Parental Con trol

V-Ch ip
Change Password
Remote
Keypad Lock
Source Lock
Clear Channel List

CHANGE PASSWORD

MOVE

SELECT

PARENTAL CONTROL

Input the old password.
Input the new password.
Input the new password again to confirm.

: Exit

Select your Remote: Off, Remote1 or Remote2.
This is for special purpose.

Set TV parental controls.

MOVE

SELECT

: Exit

Keypad Lock

Select this option to block or unblock the TV’s side panel buttons so that they can’t be used.

Source Lock

This option allows you to lock or unlock the input source. The source blocked can not be

chosen from input list unless you input the correct parental password.

SOUND CHANNEL PARENTAL OTHERSSETUPPICTURE

SOURCE LOCK

TV
AV

Component

HDMI 1

HDMI 2
HDMI 3
HDMI 4

Pressw UP/DOWN to select, ENTER to confirm,
LEFT/RIGHT to change to PREV/NEXT page

MOVE

Page 1/2

SELECT

: Exit

Use up/down arrow
to select the source,
press ENTER to
lock or unlock it.

Clear Channel List

This option allows you to execute Clear Channel List function.

This function will reset the whole TV system to factory default (not only reset OSD menu).

31

OSD Menu Operations

Setup Menu

The Setup Menu lets you config the TV with your preferences.

Select SETUP from the Main Menu. Press ENTER/down button to proceed to SETUP menu.

SOUND CHANNEL PARENTAL OTHERSSETUPPICTURE

Closed Caption

SOUND CHANNEL PARENTAL OTHERSSETUPPICTURE

Closed Caption

Menu Language

Menu Transparency

Video style

Clock

Initial Setup Wizard

Set various TV options.

SETUP

MOVE

SELECT

CLOSED CAPTION

Caption Display Off

Analog Caption Type CC1

Digital CC Style

Adjust Closed Captioning settings.

MOVE

English

Video

Execute

SELECT

Use up/down to choose the function you need, press

Off

ENTER or right arrow to adjust or enter a sub-menu. The

sub-menu image and explanation are shown below.

: Exit

Service1Digital Caption Type

DefaultDigital CC Preset

: Exit

32

Caption Display

Press left/right arrow to select caption display on or off.

Analog Caption Type

Press left/right arrow to select analog closed caption type: CC1, CC2, CC3, CC4, TEXT1, TEXT2, TEXT3, TEXT4.

Digital Caption Type

Press left/right arrow to select digital closed caption type: Service1, Service2, Service3, Service4, Service5, Service6.

Digital CC Preset

Press left/right arrow to select digital closed caption preset: Default, Custom.

Only in custom mode you can adjust the digital closed caption style.

Digital CC Style

Press left/right arrow to go to digital closed caption style sub-menu (see next page).

OSD Menu Operations

Digital CC Style

SOUND CHANNEL PARENTAL OTHERSSETUPPICTURE

CLOSED CAPTION

CC Size Default

CC Font Default

Text Color

CC Background Opacity

CLOSE CAPTION

Adjust the size of the digital Closed Captioning
font.

MOVE

SELECT

DefaultCC Opacity

Default

Default

DefaultCC Background Color

: Exit

Menu Language

To choose your menu language, press the left/right arrow until the language you need appears.
Available languages: English, French and Spanish.

Menu Transparency

To choose your menu transparency mode, press the left/right arrow until the transparency you need appears:
Off, Low, Medium, High.

Select the item you want to adjust in Digital CC

Style menu with up/down arrows.

After changing, you can preview the caption style
here.

Video Style

If you connect the HDMI/DVI port of PC to HDMI jack of the TV and the video signal is 1080p, please choose the compatible
video style: Video, Graphic.

Clock

SOUND CHANNEL PARENTAL OTHERSSETUPPICTURE

MOVE

CLOCK

1980-01-06 18:49:24Setup Time

SELECT

SunDay of Week

: Exit

Time Zone Eastern

Auto Clock

Daylight Saving Time

Select your Time Zone.

Time Zone

Select your time zone: Eastern, Central, Mountain, Pacific, Alaska, Hawaii, Samoa, Newfoundland, Atlantic.

Auto Clock

Select auto clock on/off. Auto clock helps you synchronize your TV time to standard time (from DTV signal).

Setup Time

Set your TV time manually (needs to turn off auto clock).

Day of Week

Displays what day it is (can’t be adjusted, displays only).

Daylight Saving Time

Set your daylight saving time on or off (needs to turn on auto clock).

Initial Setup Wizard

To set the initial settings. (see page 20)

33

OSD Menu Operations

Others Menu

The Others Menu lets you config the TV with your preferences in other features.

Choose OTHERS from the Main Menu. Press ENTER/down button to proceed to SETUP menu.

SOUND CHANNEL PARENTAL OTHERSSETUPPICTURE

OTHERS

Blue Back

No S ignal Power O ff

No Operation Power Of f

All Reset

Audio Only

Adjust settings to set other controls.

MOVE

SELECT

Exec ute

Exec ute

: Exit

Blue Back

Press ENTER button to select Blue Back on or off. If the Blue Back is turned on, the TV will display a blue background

when there is no signal input.

Use up/down to choose the function you need, press

ENTER or right arrow to adjust or enter a sub-menu.

The sub-menu image and explanation are shown below.

No Signal Power Off

Press ENTER button to select “No Signal Power Off” on or off. If it is turned on, the TV will shut off after 10-minute

no signal time. We suggest you turn on this function when Blue Back is turned on. It may hurt the LED LCD panel

if blue screen is on for too long.

Note: In PC mode, the monitor standby and power off settings depend on the No Signal Off time.

No Operation Power Off

Press ENTER button to select “No Operation Power Off” on or off. If it is turned on, the TV will shut off after a 3-hour
no operation time.

All Reset

Press ENTER button to execute reset to TV system. All the settings will be reset to factory default.

Audio Only

Press ENTER button to activate audio only mode. The TV will output only sound and the LED LCD panel will be turned off.

To restore normal playing, hold POWER button for three seconds.

34

Note: The OSD’s appearance and color are referred to the actual appliance.

Frequently Asked Questions (FAQs)

What’s the most convenient way to view High Definition (HD) video?

Connect an antenna to the TV Input jack to view free local digital channels. You may need to purchase an antenna. (See page 10

for more information about antenna setup).

Visit www.antennaweb.org for assistance in deciding what type of antenna to use to receive the local digital channels available

to you. After entering your location, this mapping program tells you which local analog and digital stations are available using a

certain antenna.

Are there other ways to view High Definition (HD) video?

Besides using an antenna as mentioned above, you can also use a set-top box to receive digital video. Contact your cable service

provider or satellite provider to purchase digital programming and have them connect the box to ensure you are viewing channels

in the best way.

How do I tell an analog channel from a digital channel?

Press the DISPLAY button to display the Channel Bar. Look at the top right corner of the screen. An “A” is displayed for an analog

channel. A “D” is displayed for a digital channel.

Note: Since the analog TV in America has been cut off, we reserve analog TV function only for some unexpected use.

Why are there bars on my screen, and can I get rid of them?

Most digital video is sent in a 16/9 format which fills your screen, but is sometimes sent in 4/3 which does not fill your screen. It

depends on how the station or device connected to your TV is formatting the video. If there are bars on the screen, press the

ASPECT button to try a different format that may eliminate the bars. Some bars can't be removed because of the way the format

is sent by the broadcaster. The format changes as you press the ASPECT button and the format type is displayed at the bottom

of the screen. For more information on screen formats, go to page 24.

Why does channel search find a lot of channels, but when I try to tune to them, there’s nothing there?

Some channels don’t carry programming, such as video On Demand. When channels are unavailable, your TV screen is blank or

appears like snow. You probably want to remove these channels from your channel list. Remove these in the Channel List Menu.

Go to page 27 for more information.

Why does the first channel search take a long time?

If you have both analog and digital channels, the TV is looking for all available channels in the channel list. If you do have digital

channels, the TV is also searching for scrambled channels, non-scrambled channels, and each sub-channel of that digital channel.

35

Troubleshooting

Identifying Problems

If there are any problems when using the product, please consult the list below. If the list does not solve the problem, call our
Customer Service Center immediately.

TV Problems

The TV can’t be turned on.

• Make sure the AC cord is plugged in.

• Check the wall

• T

he side panel may be locked (disabled). Use the remote control to turn on the TV.

• Select the Keypad Lock function in the PARENTAL Menu and press ENTER to uncheck the locking status.

There is no picture or sound but the TV is on and there is a “No Signal” sign on screen.

• Are you trying to use an input source with no device connected to it? For using other video/audio device, make sure the external
device works normally first, then press INPUT and choose the right input source.

• The Signal Type option may be set incorrectly. Go to page 20 fo

• The channel may be blank. Try to search the channel again or ch

outlet, make sure the AC output works normally and stably.

r detailed instructions.

ange another channel.

The sound is fine, but the picture is poor.

• If you can only get black and white pictures from external device that you've connected to your TV, maybe it is due to the video
cables is not connected well, or they are connected wrongly. Check the connection stability first, then check the correctness.
For AV input, the yellow video cable connects to the yellow Video In jack on the side of your TV. For Component input, the three
Y, Pb, Pr video cables (red, blue, and green) should be connect to the corresponding input jacks on the side of your TV.

• Check the antenna connections. Make sure all of the cables are

• Try adjusting the color features to improve.

firmly connected to the TV jack on side of your TV.

There is no sound, but the picture is fine.

• The sound might be muted. Try pressing the MUTE button to restore sound.

• For using AV or Component, remember to connect the device’s lef
cable is white and the right channel cable is red. Please match the cables and jacks according to their colors.

• The sound settings may not be set correctly. Go to page 26 for

• If your audio source has only one jack or is a (mono) audio sou
Audio In L jack (white) on the TV.

t and right audio output correctly. The left channel

more information.

rce, make sure you have plugged the connection into the

The buttons on the top panel don’t work.

• T

he side panel may be locked (disabled). Use the remote control to turn on the TV.

• Select the Keypad Lock function in the PARENTAL Menu and press ENTER to uncheck the locking status.

• Unplug the TV from the AC power for 10 minutes and then plug it back. Turn the TV on and try again.

The TV turns off unexpectedly.

• The electronic protection circuit may have been activated because of a power surge. Wait 30 seconds and then turn the TV

on again. If this happens frequently, the voltage in your house may be abnormal. If the other electronic equipment in your home

can’t work normally, consult a qualified service personnel.

36

Troubleshooting

Can’t select a certain channel.

• The channel may be blocked or not approved in the PARENTAL Menu.

• The channel may be skipped in channel list in CHANNEL Menu. Che

The stereo sound performance is bad.

• It may be a weak station. Use the SOUND Menu and set Analog Sound as Mono.

A black box appears on the screen.

• Closed captioning might be on. Check Closed Caption in the SETUP menu. Go to page 33 for more instructions.

Problems with the HDMI Connection.

• Make sure the HDMI device (DVD, video gamer, etc.) is turned on and the cables are firmly connected. If problems still occur,

turn off your device and reconnect it. Reset the power by unplugging the power cord and plugging it again.

• If a “No Signal” message appears on screen , the HDMI device is
for further assistance.

• If you have black bars on each side of your picture (which mean

connected might have a switch or a menu option allowing you to change the picture quality output that will fix this. Choose either

720p or 1080i.

ck the blocking and skipping status of channel.

n’t responding. Contact the manufacturer of the HDMI device

s the TV can not display a full-screen image), the device you

The Remote control doesn’t work.

• Something might be blocking between the remote control and the remote sensor on the front panel of the TV. Make sure

there is a clear path.

• The remote may not be aimed directly at the TV.

• The batteries in the remote may be weak, dead, or installed inc

orrectly. Put new batteries in the remote.

You are experiencing problems with V-Chip/Parental Controls.

• If the rating limits don’t work, you must lock the settings. Go to the Main Menu (press MENU on your remote), select
PARENTAL to check the settings.

What else can I do?

If you’ve been through the Troubleshooting section and nothing has fixed your problem, try rebooting your TV. Note that after

a reboot, you may need to run your TV through the setup process again. To reboot, unplug the power cord from the wall

outlet or power strip. Keep your TV unplugged for about 5 minutes. Then plug in the TV and turn it on. See if the problem

is fixed. If the problem remains, then please visit the Customer Support Menu at www.rca.com or updated FAQs

or contact RCA Customer Support at the support number provided in your Warranty card.

37

V-Chip Rating Explanations

US V-Chip Rating System

TV-MA (Mature Audience Only): Specifically designed to be viewed by adults and may be unsuitable for children under 17. It

contains one or more of the following content themes: crude indecent language (L),

TV-14 (Parents Strongly Cautioned): Contains some material that many parents would find unsuitable for children under 14.

Parents are strongly urged to exercise greater care in monitoring this program and are cautioned against letting children under the

age of 14 watch unattended. This program contains one or more of the following content themes: intensely suggestive dialogu

strong coarse language (L), intense sexual situations (S), or inte

TV-PG (Parental Guidance Suggested) : Contains material that parents may find unsuitable for younger children. Many parents

may want to watch it with their younger children. The program contains one or more of the following content themes: some

suggestive dialogue (D), infrequent coarse language (L), some sexual situations (S), or moderate violence (V).

TV-G (Parental Audience): Most parents would find this program suitable for all ages. It contains little or no sexual dialogue (D)

or situations (S), no strong language (L), and little or no violence (V).

TV-Y7 (Directed to Children 7 years and older): Designed for children age of 7 and above. It may be more appropriate for children

who have acquired the developmental skills needed to distinguish between make believe and reality. Themes and elements in this

program may include mild fantasy violence (FV) or comedic violence, or may frighten children under the age of 7.

TV-Y (All Children): Themes and elements in this program are designed for a young audience, including children ages 2-6.

It is not expected to frighten younger children.

nse violence (V).

explicit sexual activity (S), or graphic violence (V).

e (D),

Canadian English V-Chip Rating System

18+ (Adult): Programming intended for adults 18 and older. It may contain elements of violence, language, and sexual content

which could make it unsuitable for viewers under 18. Violence Guidelines: May contain violence integral to the development of

the plot, character or theme, intended for adult audiences. Other Content Guidelines: May contain graphic language an d explicit

portrayals of nudity and/or sex.

14+ (Viewer 14 and over): Programming contains themes or contents which may not be suitable for viewers under the age of 14.

Parents are strongly cautioned to exercise discretion in permitting viewing by pre-teens and early teens. Violence Guidelines:

May contain intense scenes of violence. Could deal with mature themes and societal issues in a realistic fashion.

Other Content Guidelines: May contain scenes of nudity and/or sexual activity. There could be frequent use of profanity.

PG (Parental Guidance): Programming intended for a general audience but which may not be suitable for younger children

(under the age of 8). Parents may consider some content inappropriate for unsupervised viewing by children aged 8-13.

Violence Guidelines: Depictions of conflict and/or aggression will be limited and moderate; may include physical, fantasy, or
supernatural violence. Other Content Guidelines: May contain infrequent mild profanity, or mildly suggestive language.

Could also contain brief scenes of nudity.

G (General Audience): Programming considered acceptable for all ages groups. While not designed specifically for children,

it is understood younger viewers may be part of the audience. Violence Guidelines: Will contain very little violence, either physical or

verbal or emotional. Will be sensitive to themes which could frighten a younger child, will not depict realistic scenes of violence

which minimize or gloss over the effects of violent acts. Other Content Guidelines: There may be some inoffensive slang, no

profanity and no nudity.

38

V-Chip Rating Explanations

C8+ (Children 8 and older): Programming generally considered acceptable for children 8 years and over to watch on their own.

Violence Guidelines: Violence will not be portrayed as the preferred, acceptable, or only way to resolve conflict or encourage

children to imitate dangerous acts which they may see on television. Any realistic depict

discreet, of low intensity and will show the consequences of

nudity o

C (Children): Programming intended for children under age of 8. Violence Guidelines: Careful attention is paid to themes which

could threaten children’s sense of security and well being. There will be no realistic scenes of violence. Depictions of aggressive

behavior will be infrequent and limited to portrayals that are clearly

Other C

r sexual content.

ontent Guidelines: There will be no offensive language, nudity or sexual content.

the acts. Other Content Guidelines: There will be no profanity,

imaginary, comedic or unrealistic in nature.

Canadian French V-Chip Rating System

18+ (Adult): Programming is for adults only. This program contains sustained violence or extremely violent scenes.

16+ (Viewer 16 and over): Programming is not suitable for those under age 16. This program contains frequent scenes of

violence or intensely violent scenes.

13+ (Viewer 13 and over): Programming may not be suitable for children under the age of 13. This program either contains

several violent scenes or one or more scenes that are violent enough to affect them. Viewing in the company of an adult is

therefore strongly recommended for children under the age of 13.

8+ (Viewer 8 and over): Not recommended for young children. This program is suitable for most audiences, but it contains mild

or occasional violence that could upset young children. Viewing in the company of an adult is therefore recommended for young

children (under the age of 8) who do not distinguish between reality and imagination.

G (General Audience): This program is suitable for audiences of all ages. It contains no vio

contain i

s either minimal or is presented in a humorous manner, as a caricature, or in an unrealistic way.

ions of violence will be infrequent,

lence, or any violence that it does

39

Wall Mounting Unit Specification

Model Unit Dimension (unit:mm) Screw

LED55B55R120Q VESA 400 x400 M6 screws, length 35mm

400 mm

400 mm

Note:
A. The wall mount is not contained in the accessories sold with television. We only provide the installing specifications but not the
wall mount itself. If you need the mount, please consult with the local dealer for a VESA wall mount.
B. We strongly suggest to set the wall mount with equipments of specification we ordered. If not, inappropriate installing may
cause damage to device or people.
C. We recommend that you use an telescopic wall mount when mounting the TV to a wall. You must keep enough distance
between the TV and the wall to avoid subjecting it (specially the bottom part of the back cover)to the impact and force from the wall.

Warnings:

1. Do not set up the wall mount by yourself. Please contact qualified professionals for installation.

2. The TV should not be mounted on walls or surfaces which have an angle more than 10 degrees with vertical direction.
Otherwise the TV set may fall.

3. The walls for mounting must have enough strength to hold the whole weight of TV set. For example, concrete wall and brickwork
are eligible. Do not place the mount on soft walls such as earth walls and plasterboard.

4. If spare parts of different specifications (such as screws) are used during mounting, consult with qualified professionals to make
sure these parts are safe and effective.

5. Before attaching the base to wall, ensure the holes for anchors are in keeping with the installing rules. Otherwise there may exist
some potential problems.

6. Do not place any heating source under your television. Or else, it can cause fire.

7. Do not place the TV near anything dripping. Transducers and high voltage wires should be kept far away from the apparatus too.
Or else, it may cause creepage, electric shock or bad resonance.

8. Do not place TV in a location where collision or vibration is liable to happen.

9. In order to avoid unexpected falling of the TV set, do not put any strong force on TV or wall mount after installing.

10. Be sure to unplug the TV before installing. Keep anything hard or sharp away from the screen panel to prevent the scuffing.

11. After installing, if there is any need to move the cabinet, please contact the qualified professionals.

40

USB Media Play

With USB Media Play, you can enjoy music and photo files stored in a USB storage device on your RCA TV.

Connecting a USB storage device

Connect a USB storage device to the USB port in the back of the TV.

Press “INPUT” and select “Media”.

“USB Media Play” menu will appear.

Music Photo Media Setting Now Playing

Playing back Music files

Press arrow ( / ) to select “Music” and press “ENTER”.

The file or folder list will show up. Press arrow ( / ) to select a file or folder. Press “ENTER” to playback the music

file you selected.

Playing back Photo files

Press arrow ( / ) to select “Photo” and press “ENTER”.

The file or folder list will show up. Press arrow ( / ) to select a file or folder. Press “ENTER” , and you will be given

several options to view photo files.

You can directly open and playback the file. view thumbnails for photo preview, or play slideshow.

Media setting for Slideshow and Music playback

Press arrow ( / ) to select “Media Setting” and press “ENTER”.

In “Media Setting”, you can set various options for Slideshow and Music Playback.

Media Support Specification

Supported Files

Photo

Music

Supported USB storage/file system format

USB Storage USB flash drive

File System format FAT32

JPG/JPEG files

MP3 (8~320kbps) files

Caution:

Do not turn off the TV or disconnect USB storage device while the TV is playing back picture or music. This may result in loss

of data or damage to the USB storage device, and RCA is not responsible for any damage to, or loss of, data on the USB

storage device.

41

Product Specification

Model LED55B55R120Q

Diagonal Display Size 55 inches

Television System American TV standard ATSC/NTSC system

Channel Coverage VHF: 2~13 UHF: 14~69 CATV: 1~135

Storage Temperature: -20℃~+60℃ (-4℉~+140℉)

Temperature

Operating Temperature: 0℃~+50℃ (+32℉~+122℉)

Storage Humidity: Less than 85% RH (No condensation)

Humidity

Operating Humidity: Less than 80% RH (No condensation)

Power Supply AC 100-120V, 60Hz

RF Input Cable/Antenna x 1

HDMI 4

3 x 1 + Audio R, L (RCA)

Component

(Component sound is shared with AV)

Connection
Interface

Resolution 1920 x 1080

Panel Frame Rate 120Hz

Component/HDMI mode 480i, 480p, 720p, 1080i, 1080p

Dimensions

AV-IN
(Composite)

PC Input RGB 15pin x 1, Stereo 3.5mm x 1

Audio Output

With stand 50.3”W x 32.4”H x 10.2”D

Without stand 50.3”W x 29.8”H x 3.8”D

Video + Audio R, L (RCA)

Digital Audio Out x 1 (Coaxial)

RCA stereo out x 1

Headphone 3.5mm x 1

With stand 49.3LBS (22.4KGS)

Weight

Without stand 42.5LBS (19.3KGS)

Power Consumption less than 176W

Notice: Specifications are subject to change without notice.

42

Made for Today.

Limite d Warrant y for USA and Mexico

C o ver a g e – L a b or

F o r a period o f 12 month s f ro m da t e o f purchas e o f you r RC A p r oduct , we wil l pa y an
au t hor i z e d RC A s e r v i c e c en t e r t h e la b o r c h a r g e t o r e p ai r a n y d e f ec t s i n m a t eria l s o r
wor k m a n s hi p i n y o u r t e le v i s ion.

a refurbished unit of the same or better model.

C o vera g e – P arts

Fo r a perio d o f 1 2 mon t h s fro m d a t e o f pu r chas e o f you r RC A product , w e wil l pa y an
author i z e d RC A s e rvic e cent e r fo r th e new , o r a t ou r op t ion , re f urb i s h e d repl a c e m en t par t s
nee d e d t o r e pair a n y de f e c t s in ma t e ri a l or w o rk m a n s hip i n yo u r t elev i si o n .

unrepairable we will provide you with a refurbished unit of the same or better model.

Coverage–LED LCD Panel

Fo r a perio d o f 1 2 mon t h s fro m d a t e o f pu r chas e o f you r RC A product , w e wil l pa y an
authorized RCA service center for the new, or at our option,refurbished LED LCD panel needed to
rep a i r a n y de f e c t s in m a t er i al or w o r k m a n s h i p in y o u r t elev i s ion.

we will provide you with a refurbished unit of the same or bett er model.

If your television is unrepairable we will provide you with

If your television is

If your television is unrepairable

H o w t o O b ta i n S erv i ce

• For assistance (U.S.A) - if you purchased RCA product in U.S. A, please call 1-888-977-6722.
Or visit www.rca.com

• For assistance (Mexico) - if you purchased RCA product in Mex ico, please call 01-800-8233858
Or visit www.rca.com

[Mexico service center address]

Th e serv i c e representativ e wil l rev i e w you r option s fo r service . A s a convenienc e w e offe r thre e ways
t o ob t ai n w a rr a n t y s e rv i ce . Y o u m a y mai l y o u r p r od u c t t o t h e addres s p r o v id e d b y t h e s e rv i c e
re p r e s en t a t i v e , y o u m a y t a k e y o u r p r o duc t t o a n a uthor i z e d s e rvic e c e nter , o r yo u m a y requ e s t in

om e s e rvi c e ( s er v i c e r w il l d e t ermi n e i f p ro d u c t i s s e rviceab l e i n hom e o r mus t b e t ake n b a c k t o local

h
s er v i c e c en t e r f o r repa i r ) . S er v i c e re p r e s en t a t i v e wil l su p pl y i nstr u ctio n s fo r p r e ferr e d service . A t the
tim e of
ab o ve are a p pli c a bl e f or i n -ho m e-s e rv i ce.

serv i c e proo f o f purchas e suc h a s origina l rece i pt , wil l b e required . Onl y 37 ” LC D siz e and

43

I tem s N o t C o vere d By L i m i te d W arra n ty

Your limited warra n ty d o es no t c o ve r the followi n g items:

Un-installation, installation an d a djustm e nt of c u stom e r c o n trols a n d op e rating instruct i on.
Batterie s a n d cust o me r re p lace m ent fuses.
Dam a g e d u e t o mis u se , ab u se , n e gl i ge n c e o r n e glec t i n cl u di n g but , no t l i mite d to , d a mage
resulting fro m exp o s u re to moi s ture, humidit y o r s alt.
Inabilit y to r e ce i v e a s i gna l due to prob l e ms not ca u s e d by the p ro d uct.
Dam a ge to the pro d uct d u e to images b u rnt into the screen.
Product purchased or serviced outside of Country of Original Purchase.

-i.e. Purchased USA can not be serviced in Mexico/Purchased in Mexico can not be serviced in USA.
Prod u ct mod i fied or incor p orated into o t he r p ro d uc t s .
Dam a ge d u e to acts of na t ure, inc l udi n g but not limited to, lightnin g damage o r floodi n g.
S erv i c e cal l s wh i c h do n o t in v o l v e a n y d e f ec t in ma t erial s o r w o rk m anship.

C o mmer c i a l Us e E xc l u d ed

Thi s limit e d warr a nt y o nl y appli e s t o p rod u ct s u s e d fo r p e rsona l u s e an d do e s no t c o ve r a n y

d uc t u s e d for institutio n al, comm e rc i al or r e ntal p u rp o s e s .

pro

LIMITAT I O N O F WARRANTY

THI S LIMITE D W A RR A NT Y I S TH E S O L E A N D EXCLUSIV E WARR A NT Y APPLICABL E T O THIS
PRO D U CT . O N C O R P U S , INC. , T H E MANUFA C TUR E R O F THI S PRO D UCT , DIS C L AIM S ALL
OTH E R WARR A NTIES, LUDIN G AL L IMPL I E D WARRANTIES EXPRESSED O R IMPLIE D (INC
OF MERCHANTABILIT Y O R FITNES S FO R A PARTICU
INF O RMATIO N GIVEN B Y O N C O R P US , INC. , IT S AGENTS , INDEPENDENT
CONTRACTORS , SALE S REPRESENTAT I VES , EMP L OYEES , RETAIL DEALERS , WHOL E SALE
DISTRIBUTOR S O R AN Y OTHE R TH I R D PART Y SHAL L CREA T E A GUARANT Y OR
INCREASE . EXP A N D OR MODIFY T H E SCOPE OF THIS LIMITED W A RR A N T Y.

LA R P U RPOSE) . N O V ERBA L O R WRITT E N

44

THI S LIMITE D WARR A NT Y PROV I DE S TH E SOL E AN D E XCLUSIV E REMED Y F O R T HE
CONSUM E R O F REPAI R O R REPL A CEMEN T O F TH E PRODUCT . O N COR P US , INC . SHALL
NOT BE LIABLE FOR SPECIAL, INCIDENTAL OR
TH E US E O F TH E PRODUCT O R A R ISI N G O U T O F A BR E AC H EXPRESS
WARRANTY ON THIS PRODUCT.

THI S LIMITE D W A RR A N T Y AN D TH E DISCLAI M ER S CONTA I NE D H E REI N AR E GOVERNE D BY
TH E LAW S O F TH E STAT E O F INDIANA . EXCEP T T O TH E EX T EN T PROHIBITED
APPLICABL E LAW , AN Y IMPLIE D WARR A NT Y O F MERCH A NTABILIT Y O R FITNE S S FO R A
PARTICUL A R PURPOS E I S LIMITE D T O APPLI C ABL E LIMI T E D WARRANT Y PERIOD(S ) SET
FORT H ABOVE.

THIS

W A RRANT Y GIVE S YO U SPEC I FI C LEGA L RIGHT S AN D YO U AL S O MA Y HA V E OTH E R

RIGHTS TH A T VARY FROM STATE TO STATE.

RCA is a trademark of RCA T rademark Management SAS and used under license by ON Corporatio n

CONSEQU E NTIAL DAM A GES ARISING OUT OF

E D O R IMPLIED

B Y

Hecho para Hoy.

G ara n t í a l i m i ta d a p ara E E . U U y Mexico.

C o b e r tu r a - T r a b a jo

D u r a n t e u n p e r í o d o d e 1 2 m e s es d e s d e la f ech a d e com p r a d e su p r o duc to RCA , p a g a r e m o s a
u n c e n t r o a u t o r i za d o d e s e r v i c i o de RC A e l c a r g o de m a n o d e obra p a r a r e pa r a r cu a l q u i e r
de f e c t o en ma t e riales o m a no de o b ra en el t elevisor. Si su televisor es irreparable que le
p r o porcio n a r á u n a u n i d a d r e a c o n d i c i o n a d a d e l mis m o m o d e l o o s u p e r i o r .

C o b er t u r a / Re c a m bios

D u r a n t e u n p e r í o d o d e 1 2 m e s es d e s d e la f ech a d e com p r a d e su p r o duc to RCA , p a g a r e m o s a
u n c e n t r o a u t o r i za d o d e s e r v i c i o de RC A p a r a u n r e emp l a z a r ya se a c o n p a r t e s n u e vas o
r e a c o nd i c i on a d a s , o a n u e st r a o p c i ó n , p a r a r e p a r a r c u a l q u i e r d e f e c t o d e l m a t e r i a l o m a n o d e
o b r a e n el t el e v i s o r . S i su t e l e v i so r es irrep a r a b l e q u e l e p r o p o r ci o n a r á u n a u n i d a d
r e a condicion a d a d e l m i s m o mo d e l o o s u p e r i o r.

P a n e l d e C o b er t u r a - LED LCD

D u r a n t e u n p e r í o d o d e 1 2 m e s es d e s d e la f ech a d e com p r a d e su p r o duc to RCA , p a g a r e m o s u n
c e n t r o a u t oriza d o d e s e r vi c i o d e R C A pa r a u n r e e m p l a za r la p a n t all a L ED , y a s e a con p a n t a l la
n u e va o r e a c o n d i c i o n ad a , o a n u e s t r a o p c i ó n , p a r a r e p a r a r c u a l q u i e r d e f ec t o d e l ma t e r ia l o m a n o
d e o b ra e n la p a n t all a d e su t el e v i so r . S i su t el e v i so r es i r r e p a r abl e q u e l e p r oporci o n a r á una
u n i da d r e a c o n d ici o n a da d e l m i s m o mo d e l o o s u p er i o r .

C ó m o Ob t e n e r Se r v i c io

P a r a asis t e n ci a e n E s t a d o s Uni d o s ( E . U . A ) si c o m p r ó u n apar a t o R C A e n E . U . A . f avo r d e
al : 1 - 8 88-977 - 6 7 2 2 o vi s ite : www.rca.com

P a r a asis t e n ci a e n México : s i co m p r ó un a p a r a t o R CA e n M é x i c o , f a vo r de ll a m a r a l: 0 1 - 8 0 0 - 8 2 3 -
3 8 5 8 , o v i s i t e : www.rca.com

(Ce n t ro de S e r v i ci o e n Mé x i co )

E l r e p r e s e n t an t e d e S e r vicio r e v i s a r á s u s o p c ion e s p a r a el se r v i ci o .
P a r a su c o m o d i da d le o f r e c e m o s t r e s f o r m a s d e o b t e n e r se r v i ci o d e g a r an tí a . Us t e d p u e d e e nvi a r
s u p r o d u c t o a la di r e cció n p r o p o r ci o n a da p o r el r e p r e s e n t an t e d e se r v i cio , us t e d p u e d e l l e v a r su

p r oduc t o a un c e ntr o d e ser v ici o a u to r izad o , o pu e d e s o li c ita r e n e l s e rvic i o a d o m icilio
( a d mi n i s t r a d o r d e t erminar á s i el p r o d u c t o se e n c u e n t re e n f unci o n a m i e n t o e n c a s a o d e b e ser
llevado de v uelta a se r vi
p r o porcio n a r á l a s i n s t r u c c i o n e s p a r a el s e r vicio p r e f e r i d o . S e r e qu i e r e d e l co m p r o b a n t e d e
c o m p ra ori g i n al. Sól o s e l e s d a r á s e rvicio a Domicili o a T e leviso r e s d e 3 7 " p u l gad a s d e tam a ñ o y
m ás g r a nd e s .

c io loc a l técnico para s u rep a ración). El r epre s entante d e l Servicio le

lla m a r

45

E l e m en t o s no c ubie r t o s por la g a r a n tía l imit a da
Su g arantí a li m ita d a n o cubre los si g ui e n t es tem a s:

Un- i n s t a l a c i ó n , m o n t a j e y a j u s t e d e c o n t r o l e s d e l c li e n t e e i n s t r u c c io n e s d e f u n c ionami e n t o .
L a s pi l a s y l o s f u s ib l e s d e rep u e s t o a l c li e n t e .
Da ñ o s p o r u s o indebi d o , a b u s o , neglig e n c i a o d e s c ui d o i n c l u y en d o pe r o n o l i m i t a d o a , l o s da ñ o s de r i v a d o s
d e l a e x p o s i c i ó n a l a humed a d , l a humed a d o l a s a l .
I n c a p a c id a d pa r a recib i r l a s eñ a l debi d o a l o s p r oble m a s q u e n o s o n c a u s a d a s p o r e l p r o d u c t o .
Da ñ o s e n e l p r o d u c t o debi d o a l a s i m áge n e s d e graba d a s e n l a p a n t al l a .
Productos comprados o prestar servicios fuera del pais de compra original.
Ej: Comprado en Estados Unidos no puede prestar servicios en Mexico/

Comprado en Mexico no puede prestar servicios en Estados Unidos.
P r o d u c t o s m o d i f i c ad o s o i n c o r p o r a d o s a o t r o s p r o d u c t o s .
Da ñ o s debi d o s a f e n ó m e n o s d e l a n a t ura l e z a , i n c l u y en d o p e r o n o li m i t a d o a , da ñ o s p o r r a y o s o

inundacio n e s .

L a s l l a m a d a s d e s e r v i c i o q u e n o impliqu e n c ualqui e r d e f e c t o e n m a t eria l e s o m a n o d e ob r a .

U so C o me r ci a l Ex c lu s ión

E s ta ga r a n t ía limitada sólo s e aplica a lo s produc t o s u t ilizado s pa r a u s o pe r s ona l o , y no cubre
tod o s l o s p roductos utiliza d os c o n f i n e s insti t u cion a les, c o me r c i a les o d e alq u il e r .

LI M IT A C IÓ N D E G A R A N T Í A

E ST A GA R A N T Í A L I M I T A D A E S E L Ú N I C O Y E X C L U S I V O D E G ARA N T Í A A P L I CABLE A E STE
P R O D U C T O . EN C O R P E E . U U . , I n c . , e l f a b r i c a n t e d e e s t e p r o d u c t o , r e c h a z a c u a l q u i e r o t r a
g a r an tí a , e x pr e s a d a o i m p l i c a d a ( I N CLU Y E N D O T O D A S L A S G A R A N TÍ A S IM P L Í C I T A S D E

C O M ER C I A L I Z AC IÓ N O I D O N E I D A D P ARA U N P R O P Ó S IT O PAR TI CUL A R ) . N O in f o r m aci ó n
v e r b a l o e s c r i t a p o r p a r t e C O R P D E E E . UU . , I nc . , su s ag e n t es , c o n t r a t i s t as in d e p e n d ie n t es ,
r e p r e se n t an t es d e v e n t as , em p l eados , c o m e r c i a n t e s mi n o r i s t as , mayo r i s t a s o c u a lq u i e r o t ro
t erc e r o DE BE R Á N c re a r u n a g a r a n tí a n i a u m e n t a r . A m p l ia r o m o d i f ic a r el alc
g a r

an tí a limi t a d a . E s t a GA RA N T Í A L I M IT AD A D E L Ú N I C O Y E X CLU SI V O R E M ED IO P AR A EL
C O N S U M I D O R D E R E P A R A C IÓ N O R E EMP L A ZO DEL PR O D U C T O . E N C O R P E E . U U ., I nc .
n o s e r á responsa b l e por d a ñ o s e s p e ci a l e s , i n c i d e n t a l es o cons e c u e n t e s r e sul t a n t es D E L U S O
D E L P R O D U C TO O D ER I V A D OS D E UN A V I O L A C I Ó N g a r a n t í a e x p r e s a o i m p l í c i t a d e e s t e
p r o duc t o . E S T A G ARAN T Í A L I M I T ADA Y R E S P O N S A B I L I DADE S con t e n id a en é l s e r i g e p o r
las Le y e s del E s tado de Indiana . SALVOP R O H IBIDO PO R LA LEY APLI C ABLE , CU A L QUIE R
G ARAN TÍA I M P L Í C ITA D E C O M ER C I A L I Z AC IÓ N O I D O N E I D
P A R T I C UL A R E S T A R Á L I M IT AD A A L I M ITA D A p e r í o d o d e g a r a n tí a ( S ) m e n cio n a do
a n t e r iormen t e . E s t a g a r a n t í a l e o t or g a d e r e c h o s lega l e s e s p e c íf i c o s y U S T E D T AMB I É N P U E D E
T ENE R O T R O S D EREC H O S , Q U E P UEDEN V A R I A R D E E S TA D O .

A D P AR A U N P R OP Ó S IT O

a n ce d e es t a

46

R C A e s u n a m ar c a r e g i s t r a d a de S A S b a j o l i c e n c i a d e O N C o r p o r a t i o n

ON Corp US, Inc.
10920 Via Frontera, Ste 540
San Diego, CA 92127, U.S.A.

2012 ON Corporation

RCA is a trademark of RCA Trademark Management SAS
used under license to ON Corporation.

RCA es una marcade RCA Trademark Management SAS
usada bajo licencia de ON Corporation.