RCA LED39B45RQ User Manual

Please register your product at www.rca.com

Please keep your sales receipt and keep the record of
the serial number and the date of purchase in order to
receive warranty parts and service.
The serial number is located at the back of the TV.

Part No.: RN0339J105

English

LED LCD TV
User’s Manual

Model Number.
LED39B45RQ

Made for Today.

Table of Contents

Child Safety Guide
Caution and Warning
FCC Notice 2
Safety Precautions 2

Preparation for Your New TV

Check Accessories

Setup TV Table Stand

Select TV Location

Connection and Using

TV Stand Installation
TV Signal Connection 4
Cable Connections 4
Side Panel Connections 4

Connecting AV Composite Video device

Connecting YPbPr Component device

Connecting HDMI device

How to Obtain Various Kinds of Input Sources

TV Jacks Explanation
Keypad and Front Panel

Panel Buttons

Front Panel

Remote Control Instructions

Inserting Batteries in the Remote

Remote Control Reception Angle

Learning about Remote Control

Remote Control Buttons

Initial Setup 7
Basic Operations 7

Turning On and Off

Choosing TV Channel

Selecting Input Source

Channel Bar

Adjusting Volume

EPG (Electronic Program Guide)

OSD Menu Operations

Adjust the OSD Screen

Picture Menu

Sound Menu

Channel Menu

Parental Menu

Setup Menu

Others Menu

Frequently Asked Questions (FAQs)
Troubleshooting
V-Chip Rating Explanations

US V-Chip Rating System

Canadian English Rating System

Canadian French Rating System

Wall Mounting Unit Specification
USB Media Play
Product Specification
Warranty Card

...........................................................

......................................................

......................................................................

.........................................................

.........................................

...........................................................

........................................................

............................................................

........................................................

.......................................................

......................................................

..........................................................

..................................................

.................................

...................................

....................................................

.........................

.....................................................

.................................................

..................................................................

......................................................................

..........................................

..........................................

..........................................

....................................

.....................................................

......................................................................

.............................................................

............................................................

.........................................................

.......................................................

.....................................................................

..............................................................

...........................................

....................................................

......................................................

...................................................................

....................................................................

.................................................................

.................................................................

...................................................................

..................................................................

............................

............................................................

..........................................

..................................................

.........................................

.........................................

.................................

.............................................................

....................................................

................................................................

Child Safety Guide

1

2

3
3

3

3

3

3

4

5

5

5

5

6

6

6
6

6

6
6

6

7

7

7

7

7

8

8

8

8

8

9

9

10

10

Child Safety Guide

11

11

12

12

12

12

13

13

13

14

1

Use una montura que se ha recomendado por el fabricante de monitor y/o
listado por un laboratorio independiente (como UL, CSA, ETL).

Sig a todas l as inst rucci ones of recid as por el f abric ante de m onito r y
mon taje de p ared.

Caution and Warning

CAUTION

RISK OF ELECTRIC SHO CK

DO NOT OPEN

Caution: To reduce the risk of electric shock, do not
remove cover or back. No user-serviceable parts inside.
Refer servicing to qualified service personnel.

The lightning flash with arrowhead
symbol, within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product enclosure
that may be of sufficient magnitude to
consitute a risk of electric shock.

The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and maintenance
(servicing) instructions in the literature
accompanying the TV.

WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION:
CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED
BY THE PARTY RESPONSIBLE FOR COMPLIANCE WITH THE
FCC RULES COULD AVOID THE USERS AUTHORITY TO
OPERATE THIS EQUIPMENT.

FCC Notice

FCC Information

This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio Communications. However, there is no Guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and the receiver.

- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Safety Precautions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water. For example, do not use
near a laundry tub, in a wet basement, or near a swimming pool,
and the like.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions. Slots and openings in the cabinet back
or bottom are provided for ventilation, to ensure reliable operation
of the TV and to protect it from overheating. These openings must
not be blocked or covered. The openings should never be blocked
by placing the TV on a bed, sofa, rug, or other similar surface.

8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding-type plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a
cart is used, use caution when moving the
cart/apparatus combination to avoid injury from
tip-over. A TV and cart combination should be
moved with care. Quick stops, excessive force,
and uneven surfaces may cause the TV and cart
combination to overturn.

13. Unplug this apparatus during lightning storms or when unused for
long periods of time. For added protection for this TV receiver
during a lightning storm, or when it is left unused for long periods
of time, unplug it from the wall outlet and disconnect antenna or
cable system. This will prevent damage to the TV due to lightning
and power line surges.

14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such

2 3

as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the appratus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.

15. This TV should be operated only from the type of power supply
indicated on the rating label. If customer is not sure the type of
power supply in your home, consult your appliance dealer or local
power company. For TV remote control battery power, refer to the
operating instructions.

16. The TV set shall not be exposed to dripping or splashing. No
objects filled with liquids, such as vases, shall be placed on the TV
set.

17. Never push objects of any kind into this TV through openings as
they may touch dangerous voltage or other electrical parts that
could result in fire or electric shock. Never spill liquid of any kind
into the TV.

18. Unplug the TV from the wall outlet before cleaning. Do not use
liquid or aero cleaners. Use a damp cloth for cleaning.

19. This TV should never be placed near or over a radiator or heat
resource. This TV should not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is provided or the
manufacturer's instructions have been adhered to.

20. Do not place this TV on an unstable cart, stand, tripod, bracket, or
table. The TV may fall, causing serious injury to someone, and
serious damage to the appliance.

21. Do not attempt to service this TV by yourself because opening or
removing covers may expose you to dangerous high voltage or
other hazards. Refer all servicing to qualified service personnel.

22. This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.

23. WARNING: To prevent injury, this apparatus must be securely
attached to the floor/wall in accordance with the installation
instructions.

24. To reduce the risk of electric shock, the grounding of center pin of
plug must be maintained.

25. If an outside antenna or cable system is connected to the TV, be
sure the antenna or cable system is grounded to provide some
protection against voltage surges and built-up static charges.
Section 810 of the National Electrical Code, ANSI/NFPA NO.70,
provides information with respect to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors, location of
antenna discharge unit, connection to grounding electrodes, and
requirements for the grounding electrodes. (See figure A)

AN TEN NA
LE AD IN
WI RE

GR OUN D C LAM P

AN TEN NA
DI SCH ARG E U NIT
(N EC SEC TIO N 8 10 -20 )

GR OUN DIN G C OND UC TOR S
(N EC SEC TIO N 8 10 -21 )

GR OUN D C LAM PS

EL ECT RIC SE RVI CE
EQ UIP MEN T

PO WER SE RVI CE GR OUN DIN G
EL ECT ROD E S YST EM
(N EC ART 25 0, PA RTH )

Figure A

Safety Strap

Caution: Pushing, pulling or climbing on the TV may cause the TV
falling. Do not let chlidren climb or hang on the TV. Always place the TV
on a sturdy, level, stable surface that can hold the weight of TV. And if
possible, secure the TV according to the instruction below (Note: The
fastening components such as screws are not supplied with TV).

Step one: Insert the M6 mounting screws into the upper two wall
mounting screw holes and fasten them (Figure B).
Step two: Insert anchors to wall and connect the bolts and anchors
with ropes or chains (Figure C).

Wall

M6 Screws

Figure B Figure C

Preparation for Your New TV

Before Turning On TV

Check Accessories

Check the accessories that are packed with your TV.

REMOTE CONTROL

PART NO.: RE20QP80

.

CH LIST

PICTURE

SOUND

LED LCD TV
User’s Manual

Model Number.
LED39B45RQ

Please register your product at www.rca.com

Please keep your sales receipt and keep the record of
the serial number and the date of purchase in order to
receive warranty parts and service.
The serial number is located at the back of the TV.

USER’S GUIDE

Setup TV Table Stand

Please refer to TV Stand Installation guide in next page to carry out
stand installing.

Select TV Location

Select a flat, stable table to place your TV set. Please follow the Safety
Instructions when placing the TV.

Connection and Using

After placing your TV properly, you can connect the TV with power
supply and cable components. For further information, see page 4 to
page 5.

Note: Above accessories are subject to change without notice.

AAA BATTERIES

TV STAND BASE

DOCUMENTS

Part No.: RN0339J105

English

QUICK START GUIDE

Quick Start Guide

TV STAND SCREWS

SCREWS

M4 x 12mm, 9pcs
Part# RS01TB412H

TV STAND NECK

The television is covered by one o r more claims of th e followin g

United States patents:

· U.S. Patent No. 5,475,716

· U.S. Patent No. 5,511,096

· U.S. Patent No. 5,537,420

· U.S. Patent No. 5,621,761

· U.S. Patent No. 5,519,733

· U.S. Patent No. 5,703,887

· U.S. Patent No. 5,579,348

· U.S. Patent No. 5,745,522

· U.S. Patent No. 5,363,408

· U.S. Patent No. 5,511,082

· U.S. Patent No. 5,321,725

· U.S. Patent No. 5,371,902

· U.S. Patent No. 5,233,629

· U.S. Patent No. 5,408,502

· U.S. Patent No. 5,311,546

· U.S. Patent No. 5,396,518

Part No.: RN4146AL05

PATENT CARD

TV Stand Installation

TV LED39B45RQ is packaged with the TV stand separated from the
cabinet. To setup the TV table stand, please carry out the installation
according to the instructions below.

Step One

Place the TV faced down on a soft cloth or cushion to prevent the LED
LCD panel from being damaged.

The LED LCD panel can be
scratched easily, so please:

1. Choose an absolutely flat
surface to place the TV on.

2. Use soft cloth or cushion to
face the TV panel.
Do not put TV on the table
directly.

Always unplug the AC cord first

Step Two

Take the neck. Please align the screw holes of the neck and the TV, and
then insert the 5 screws into the 5 holes on the neck and tighten them.

when installing/removing the stand.

Pedestal

Quantity Part #

Screws

M4 x 12mm

Step Three

Take the base. Please align four holes of the base and four screwholes
of the neck, insert the base to the neck, and then insert the 4 screws
and tighten them.

Pedestal

Longer side

Please take note of the base direction:

The bottom view of the TV

(Front cabinet faces down)

Screws

M4 x 12mm

Longer side

RS01TB412H

5pcs

Quantity Part #

RS01TB412H

4pcs

TV Signal Connection

The first step in connecting your TV is obtaining the signal. Your TV
LED39B45RQ has a back panel, which allows you to receive analog
and/or digital television channels via ANT/CABLE jack.
Before connecting your TV, determine using an antenna or a cable
service to obtain the signal.

A. Antenna

Connect the antenna to TV via coaxial cable on ANT/CABLE jack
of the back panel. You are ready to receive air local digital and
analog channels.

B. Cable TV service

Connect the cable TV wall jack to TV via coaxial cable on
ANT/CABLE jack of the back panel. You are ready to receive
off-air local digital and analog channels.

C. Set-Top Box

If you use a set-top box, you may need to call your cable company
or satellite service provider, which use a special connection, please

refer to the user’s guide of set-top box.

Note: Do not plug the AC cord until you have accomplished
all the connections.

AC

100-120V

60Hz

AC Power Cord

(Connect after all the other connections are done.)

ANT/

CABLE

WALL

OUTLET

AntennaCable TV

Or

Cable Connections

Choose Your Connections

TV LED39B45RQ supports various connections to other devices

(such as DVD, VCR, Set-top box, etc.). Please follow the table to

choose the cables which adapt to your device.

Jacks Cables

COMPOSITE

L-AUDIO-R

COMPONENT Y, Pb, Pr

L-AUDIO-R

HDMI 1/DVI, 2

Note:
HDMI, the HDMI logo, and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing LLC

Caution:
Unplug the AC cord when you connect other devices to TV.

Video/Audio cable

Audio Cable

COMPONENT video cable

HDMI-DVI cable

HDMI cable

Further
Information

See the below

Go to page 5

Go to page 5

Side Panel Connections

Connecting AV Composite device

(Good Video Quality)

Composite connector will be shared with Component Y connector.

To connect a composite AV device, such as a DVD player, follow these
steps:

1.Connect the COMPOSITE jack on the side of TV to the video output

jacks of device via video cable (yellow).

2.Connect the L-AUDIO-R jacks on the side of TV to the audio
output jacks of device via audio cable.
Notice the left channel jack and plugs are white and the right
channel jack and plugs are red.

Note: AV signal belongs to composite video. This kind of video signal
has regular good display quality.

Composite Video Connection

The picture below is an example of a connection using the
composite video jack.

The back of TV

Audio

Video

HDMI

The output panel of other device

L R

Audio

YPbPr

L R

Connecting YPbPr Component device

(Better Video Quality)

To connect a component device, such as a DVD player, follow these
steps:

1.Connect the COMPONENT IN Y/Pb/Pr jack on the side of TV to the

video output jacks of device via video cable (green, blue and red).

2.Connect the L-AUDIO-R jacks on the side of TV to the audio
output jacks of device via audio cable.
Notice the left channel jack and plugs are white and the right channel
jack and plugs are red.

Note: Y/Pb/Pr jacks are component video. This kind of video signal has
better display quality.

Component Video Connection

The picture below is an example of a connection using the component
video jack.

The back of TV

Audio

L R

L RVideo

Audio

YPbPr

HDMI

The output panel of other device

Connecting HDMI device

(Best Video Quality)

To connect a HDMI device, such as a DVD player, please Connect the
HDMI1/DVI, 2 jack on the side of TV to the output jacks of device via
HDMI cable.

To connect a DVI device, via DVI port of PC or Device and HDMI
jack of TV:

1. Connect the HDMI1/DVI jack on the side of TV to the DVI port of
PC via HDMI-DVI cable.

2. Connect the L-AUDIO-R jack on the side of TV to the audio

output jack of computer with audio cable (dual-channel RCA jacks
to 3.5mm stereo jack or the L-AUDIO-R jack).

Note: 1. HDMI (High-Definition Multimedia Interface) is a compact
audio/video interface for transmitting uncompressed digital data. It
carries the audio and video signal via the same cable and has the best
display quality.

2. HDMI-DVI cable transfers only video signal from DVI port of
DVI device to HDMI jack of TV. For audio signal, please connect audio
output to L-AUDIO-R jack on TV back panel.

HDMI Connection

The picture below is an example of a connection using the HDMI video
jack.

The back of TV

The output panel

of HDMI device

The output panel of

other AV device

How to Obtain Various Kinds of Input
Sources

After connection is done, press INPUT button on remote control or TV
top panel to choose the input source you need. See page 7, Basic
Operation of TV.

TV Jacks Explanation

HEAD PHONE: Connect a 3.5mm headphone for
personal audio.
USB: Connect your USB storage device to enjoy music/

photo files on your TV. (Also used for service purpose).
HDMI1/DVI, 2: (High-Definition Multimedia Interface)

It provides an uncompressed digital connection that
carries both video and audio data by way of an integrated
mini-plug cable.
COMPONENT Y/Pb/Pr: Connect a device that has
component video jacks, such as a DVD player. To access
device connected to the Y/Pb/Pr jack, press the INPUT
button on your remote; then press the up/down arrow to
select Component. Press the ENTER button at last to
confirm.

• Y/Pb/Pr (Component Video): They provide good
picture quality because the video signal is separated into
three components. Use three video-grade or component

video cables for the connection. When using Y/Pb/Pr,

make sure you connect left and right audio cables to the
AUDIO IN R/L jacks.
L-AUDIO-R, COMPOSITE: Connect an AV device that has composite
video jacks, such as a VCR or a DVD player. To access device connected
to these jacks, press the INPUT button on your remote; then press the
up/down arrow to select AV. Press the ENTER button at last to confirm.

• AUDIO IN L: Left audio channel connection. The left audio
connector is usually white. For mono audio sources, be sure to use the
left AUDIO INPUT.

• AUDIO IN R: Right audio channel connection. The right audio
connector is usually red.
ANT/CABLE: Connect to receive the signal from your antenna or cable
via coaxial cable.

Digital Audio out: Connect a coaxial cable for digital audio output.

5

Audio

Speaker or

PC

Audio Out

Video

L R

DVI

L R

Audio

HDMI

headphone

Keypad and Front Panel

L R YPbPr

Keypad Buttons

If you cannot locate your remote, you can use the keypad buttons on
your TV to operate many TV features.

CAUTION:

• Used batteries should be recycled.

• Keep out of children’s reach.

• DO NOT use new and old batteries together.

• Change both the batteries at the same time.

• When not using the remote control for a long time, remove the

batteries from the unit.

Remote Control Reception Angle

Use your remote control within the distance and angle range shown
below.

volume.
CH or CH : Scans up or down through the current channel list.
Press once to change the channel up or down; press and hold to
continue changing channels.

PICTURE: Switches between the preset picture mode (see page 8).
SOUND: Switches between the preset sound mode (see page 8).
SLEEP: Selects the sleep timer, after which the TV will shut off

automatically.

ASPECT: Switches between the preset screen size mode (see page 8).
CC: Selects the closed caption.
MTS: Selects the multi-channel television sound.

NOTE : The keys not listed are for DVD control, they are not available
for this TV model.

Initial Setup

If it is the first time you turn on your TV, or you have done Clear

DVI

INPUT: Displays the Source Select List.
MENU: Displays the TV Main Menu.
CH : Scans up through the channel list. In the TV menu system, it acts

like the up arrow on the remote control and can be used to select
menu options.
CH : Scans down through the channel list. In the TV menu system,
it acts like the down arrow on the remote control and can be used to
select menu options.
VOL+: Increases the volume. In the TV menu system, it acts like the
right arrow on the remote control and can be used to select menu
options.
VOL-: Decreases the volume. In the TV menu system, it acts like the
left arrow on the remote control and can be used to select menu
options.
POWER ( ): Turns the TV on and off.

Front Panel

About remote control working distance and angle, see the right side.

Power/Standby Indicator: Light up in red when the TV is in standby
mode. Light out when the TV is on.
Remote Control Sensor: Remote control IR sensor, which receives
infrared ray sent by remote control.

Remote Control Sensor

Power/Standby Indicator

Remote Control Instructions

Inserting Batteries in the Remote

• Remove the cover of battery cabin on the back of the remote control

by lifting the cover.

• Insert two AAA batteries, making sure the polarities (+ and -) are

aligned correctly.

• Place the cover back.

If the remote control does not work, check these points:

• Are the polarities (+, -) correct?

• Are the batteries worn out?

• Is there an AC power failure?

• Is the power cord plugged in?

• Is there any interference or block near the remote control sensor?

Universal Remote Control Code List

For Universal Remote Control brands listed below, please use ac
companying codes and refer to your Universal Remote Control User
Manual for basic Instruction for changing TV code to operate the TV
model.

Codes for DIRECTV: 0178, 10178

Codes for Time Warner Cable: 0178, 10178

Codes for Cox Communications: 0178
Codes for Comcast: 10178
Codes for Dish Network: 627
Codes for Fios Verizon: 0205, 0057, 0493, 0775

Learning about Remote Control

Remote Control Buttons

MUTE ( ): Reduces the TV volume to its
minimum level.
Press again to restore the volume.

POWER ( ): Turns the TV on or off.
CH.LIST: Displays the channel list.
FAV.: Adds the current channel to your

favorite list, or erases the current channel from

your favorite list (if this channel is a favorite
channel already).

FAV.+ or FAV.- : Scans up or down through
the current favorite channel list.
Numeric Buttons: Use these buttons to enter
numbers.
“ ”: To enter a digital channel with a sub­channel, enter the main channel; then, press
this button to enter the sub-channel and press
ENTER.

Recall ( ): Returns to the previous channel.
EPG: Shows Electronic Program Guide (see

page 8).

INPUT: Accesses the available input channels

(TV, AV, Component, HDMI 1/2, Media). Use

the arrows to highlight options, and press
ENTER to select.
Arrows ( / / / ): Uses the four arrows
to highlight different items in the TV menu or
change the value. The up/down arrow can also
work as CH /CH button, and the left/right

arrow can also work as VOL-/VOL+ button.

ENTER: Enter and confirm button.
MENU: Accesses the Main Menu, or return to

the upper level of a sub-menu.
FREEZE: Freeze the current screen frame,
press again to return to normal.

DISPLAY: Displays the Channel Bar (see
page 7).

EXIT: Exits the current menu or function.
VOL+ or VOL-: Increases or decreases the TV

20 feet

.

CH LIST

PICTURE

SOUND

Remote control part number

RE20QP80

64

Channel List option (see page 10), the initial setup menu appears

automatically.

Step One

Please select Menu Language, press the
up/down arrow select the language you
need. Available languages: English, Spanish
and French.

Step Two

Please select the TV installation mode, press
the up/down arrow select the mode you
need: Home, Retail. If you select Home
mode, the next option is step three. If you
select Retail mode, please refer the step four.

Step Three

Please choose between Energy Saving and
Dynamic mode. You can save more energy
with Energy Saving.

Step Four

To choose your TV tuner signal type, press the up/down arrow select
the signal type: Air, Cable.
Note: please select TV signal type according to the antenna or cable
closed circuit TV you use.

Step Five

If you accomplish the initial setup, the TV will search channels
automatically.

PICT URE SOUN D C HANNE L PARENTAL SETUP OTHE RS

What to notice:

1. The channel search access starts from the Analog TV channel
searching and ends at Digital TV channel searching.

2. The channels that have been found will be stored automatically.

3. You can press MENU button to skip analog/digital channel
searching.

4. You can press ENTER/EXIT button to end the channel searching.

Initial Setup

Initial Setup Wizard will assist you in configuring

basic Settings

Next

Press ENTER/RIGHT to go to next page

MOVE

SELECT

AUTO CHANNEL SEARCH

Now Searching... Please Wait...

Return

Analog Channels Found: 1

Digital Channels Found: 0

Press MENU to skip analog signal scanning and
ENTER/EXIT to exit

MOVE

SELECT

Basic Operations

Turning On and Off

Connect the AC cord to power the LED LCD TV. At this time the TV
will enter standby mode and power indicator will turn red. Use Power

button ( ) on the top panel of TV or on the remote control to turn on

the TV. After switching off the TV for 5 seconds, you can turn on TV
again.

Choosing TV Channel

Tuning To Analog Channels

An analog channel has a channel number beginning with “A”. Input the
digital number with numeric buttons directly and press ENTER button
to confirm.
For example, to watch analog channel “A51”, press “5”, “1”, “ENTER”
on remote control in sequence.

Note: Although there is no analog TV signal available in America, we
reserve ATV functions for some expansible use.

Tuning To Digital Channels

A digital channel has a channel number beginning with “D”. Input the
main digital number with numeric buttons directly, then press “ ”
button on remote control, and input the sub number at last.
For example, to watch analog channel “D31-1”, press “3”, “1”, “ ”,
“1”, “ENTER” on remote control in sequence.

Changing Channels Directly

You can use CH button to increase channel number and CH to

decrease channel number. When no OSD (On Screen Display) is used,

the up/down arrows can also work as CH /CH buttons.

Selecting Input Source

Source Select

TV

AV

Component

: Exit

HDMI 1

Press INPUT button on remote control to
display Source Select list.
Use up/down arrows to highlight the source
you need and press ENTER to confirm.

HDMI 2

Media

Channel Bar

Press the DISPLAY button on the remote control, the channel bar will
appear on the top right corner of the screen. It displays the current

channel’s information. The following list describes the items on the

channel bar.

Air

3%

A2/D50-1 If the channel is analog, A is displayed. If it’s a

: Exit

MTV/KOCE-HD
Mono/English Displays whether the current channel is being

480i/1080i Displays the signal resolution.
16:9/CC/TV-PG Displays the screen aspect ratio, closed caption

Oct-31 23:14 Mon Displays current date and time.

A2

MTV

Mon o

480 i

Oct -31 2 3.14 Mon

Air

ATV

digital channel, D is displayed. For example, in the
pictures above, A2 is an analog channel, and

D50-1 is a digital channel ( -1 is a sub-channel
number).

Displays the channel label.

broadcasted in stereo or mono. If the current

channel is digital, this space will be SAP (Second
Audio Program) language.

and TV rating level of the current program or
channel. These are only available for digital
channels.

Adjusting Volume

Press the VOL+/VOL- button on the remote control to adjust the
volume. If you want to switch sound off, press MUTE ( ). When OSD
(On Screen Display) is not used, the arrows left/right can also work as
VOL-/VOL+ buttons.

7

D50

Oct -31 2 3:14 Mon

DTV

-

1

KOC E-HD

Eng lish

108 0i