Rca LED32C45RQ User Manual

English
Part No.: RN0332R0174
CONTENTS
Child Safety Guide
Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind :
!
CHILD
SAFETY
It makes A Difference How and Where
You Use Your Flat Panel Display
Guía de seguridad para niños
¡Muchas gracias por su uso del presente producto! Cuando usted disfruta de su nuevo producto, por favor tenga en cuenta los consej
os de seguridad:
!
SEGURIDAD
DE NIÑOS:
El Cómo y Doónde Usted usar Su
Monitor de Panntalla Plana
Marca La Diferrencia
LED LCD TV
User's Manual
MODEL
LED32C45RQ
Please keep your sales receipt and keep the record of the serial number and the date of purchase in order to receive warranty parts and service. The serial number is located at the back of the TV.
Serial Number
Date of Purchase
www.rca.com
MADE FOR TODAY
Child Safety Guide
Caution and Warning
Safety Precautions
Preparation for Your New TV
Check Accessories
Setup TV Table Stand
Select TV Location
Connection and Using
TV Signal Connection
Cable Connections
Side Panel Connections
Connecting AV Composite video device
Connecting YPbPr Component device
Connecting HDMI device
How to obtain various kinds of Input Sources
TV Jacks Explanation
Keypad and Front Panel
Keypad Buttons
Front Panel
02
02
04
05
05
05
05
05
05
05
05
05
06
06
06
06
07
07
07
Basic Operations
Turning On and Off
Choosing TV Channel
Selecting Input Source
Channel Bar
Adjusting Volume
EPG (Electronic Program Guide)
OSD Menu Operations
Adjust the OSD Screen
Picture Menu
Sound Menu
Channel Menu
Parental Menu
Setup Menu
Others Menu
Frequently Asked Questions (FAQs)
Troubleshooting
Wall Mounting Unit Specification
USB Media Play
Product Specification
Warranty Card
The Issue
The home theater ent ertainment expe rience is a growing trend and lar ger flat pa nel displays ard
07
07
07
07
08
08
08
08
08
1 2 2 3
08
09
09
09
10
11
11
polular purchases.
However, flat panel displays are not always supported on the proper stands of installed according to the manufacturer’s recommendations.
Flat panel displays that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests or cats may fall over and cause injury.
This Manufacturer Cares!
The consumer electronics industry is committed to making home entertainment enjoyable and safe.
IF YOU DICIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS :
Wall Mounting :
- Use a mount that has been recommended by the display manufacturer and/or listed by an independent laboratory (such as UL,CSA,ETL).
- Follow all instructions supplied by the display and wall mount manufacturers.
- If you have any doubts about your ability to safely install your flat panel display, contact your retailer about professional installation.
- Make sure that the wall where you are mounting the display is appropriate. Some block construction. If you are unsure, contact a professional installer.
- A minimum of two people are required for installation. Flat panel displays can be heavy.
Caution and Warning
Tune Into Safety
- One size does NOT fit all. follow the manufacturer's recommandation for the safe installation and use of your flat panel display.
- Carefu ll y rea d an d unde rs t an d all enc lo sed instructions for proper use of this product.
- Don't allow childre n to clim b on o r play wi th furniture and television sets.
- Don't place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers.
- Remember that children can become excited while watching a program, especially on a "larger than life" flat panel display. Care should be taken to place or install the display where it cannot be pushed, pulled over, or knocked down.
- Care should be taken to route all cords and cables connected to the p pulled or grabbed by curious children.
anel display so that they cannot be
12
13
13
14
14
Posibles Problemeas
- La experiencia de entretenimiento de cine en casa es una tendencia creciente y los grandes monitores de pantalla plana son muy populares.
embargo, los monitores de pant alla plana no se han instalado siempre en los soportes adecuados o instalado de acuerdo con las recomendaciones de fabricante.
- Los mon itore s de pantalla p lana qu e se han instalado inadecuadament en tocadores, estanterías, estantes, escritorios, oradores, baúle s o carros se pueden caer y causar el daño corporal.
¡Al Fabricante le Importa
- La industri a electrón ica del consumid or está comprometida a hacer el entretenimiento de casa agradable y seguro.
SI USTED DECIDE A MONTAR SU MONITOR DE PANTALLA PLANA LA PARED, SIEMPRE
Montaje de Pared:
- Use una mont ura que se ha recomendadop or el fabricante de monitor y/o listado por un laborat orio independiente(como U L, CSA, ETL).
- Siga todas las instrucciones ofrecidas por eI fabricante de monitor y montaje de pared.
- Si usted tiene cualquier duda sobre su habilidad para instalar seguramente su monito contacte a su distribuidor para la instalación profesional.
- Compruebe que la pared adonde se está montando el monitor es adecuada. Algunos montajes de la pared no son diseñados para ser montados a paredes con tachones de acero o la vieja construcción de bloque de ceniza. Si usted está inseguro, contacte a un instalador profesional.
- Por lo menos dos personas se requieren para la instalación. Los monitores de pantalla plana puede ser pesados.
Ajustar Hasta Seguridad
- Un tamaño fijo NO es adec uado para todos. siga las recomendaciones de fabricante para la instalación segura y el uso de su monitor de pantalla plana
- Lea con cuidad o y entiend a todas las instrucciones adjuntas para el uso propio de este producto.
- No perm ita a los ni ños a subir al equip o o jugar c on muebles y televisiones.
- No cloque los monitores de pantalla plana en el mueble quese puede usar fácilmente como escalón, así como una cómoda.
- Recuerde que los niños pueden llegar a ser excitados al ver una programación, especialmente en el monitor de pantalla plana "más grande que vida". El cuidado se tiene que empezar por poner o instalar el moniotr donde no se puede empujar, detener al castado del camino ni echar abajo.
-
El cuidado se tiene que empezar por encaminar todos los cordones y cables conectados al monitor de pantalla plana para que no se puedan tirar o agarrar conectados al monitor de pantalla plana para que no se pueden tirar o agarrar por los niños curiosos.
r de pantalla plana,
FCC Notice
Fcc Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Th is eq u ip men t g ene r at es, us es a nd ca n rad iat e rad io frequency energy and, if not installed and used in acc ordance with the ins tructio ns, may ca use h armful interference to radio Communications.
However, there is no Guarantee that nterference will not occur in a particular installation.
If this equi pment does cause harmful inte tele vision rec eption, which can be determined by t urning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Device complies with FDA radiation performance standards, 21 CFR subchapter. Caution: (Invisible) Laser Radiation when open. Do not stare into beam.
rfere nce to r adio or
Safety Precautions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water. For example, do not use near a laundry tub, in a wet basement, or near a swimming pool,
the like.
and
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Slots and openings in the cabinet back or bottom are provided for ventil ation, to ens ure reliable opera tion of the TV and t o protect it from overhe ating . These openings must not be blocked or covered. The openings should never be blocked by placing the TV on a bed, sofa, rug, or other similar surface.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including a mplifie rs) that produce heat.
9. Do not defeat the safety purpose of the polarized or ground type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade o r the third prong is provided for y our safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power c ord from being w alked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11 . Onl y u se atta c hm e nt s /a c ce s so rie s s pe c ifi e d by the
manufacturer.
12. Use on the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
A TV and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the TV and cart combination to overturn.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
For added protection for this TV receiver during a lightning storm, or when it is left unused for long periods of time, unplug it from the wal
This will prevent damage to the TV due to lightning and power line surges.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the appratus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. This TV should be operated only from the type of power supply indicated on the rating label.
If customer is not sure the type of power supply in your home, consult your appli ance dealer or local power com remote control battery power, refer to the operating instructions.
16. The TV set shall not be exposed to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the TV set.
ly with cart, stand, tripod, bracket, or table specified by
l outlet and disconnect antenna or cable system.
ing-
pany. F or TV
17. Never push objects of any kind into this TV through openings as they may touch dangerous voltage or other electrical parts that could result in fire or electric shock. Never spill liquid of any kind into the TV.
18. Unplug the TV from the wall outlet before cleaning. Do not use liquid or aero cleaners. Use a damp cloth for cl
19. This TV should never be placed near or over a radiator or heat resource. This TV should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.
20. Do not place this TV on an unstable cart, stand, tripod, bracket, or table. The TV may fall, causing serious injury to someone, and serious damage to the appliance.
21. Do not attempt to service this TV by yourself because opening or removing covers may expose you to dangerous high voltage or other hazards. Refer all servicing to qualifi
22. This device complies with Part 15 of the FCC Rules. Operation is subject to the foll owing two con ditio ns: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
23. WARNING: To prevent injury, this apparatus must be securely attache d to the floor /wall in acco rdan ce with the instal lation instructions.
24. To reduce the risk of electric shock, the grounding of center pin of plug must be maintained.
25. If an outside antenna or cable system is connected to the TV, be sure the antenna or protec tion against voltage surges and b uilt- up static cha rges.
Section 810 of the National Electrical Code, ANSI/NFPA NO.70, provides information with respect to proper grounding of the mast and support ing structure, grounding of the lead -in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrodes. (See figure A)
Safety Strap
Caution: Pushing, pulling or climbing on the TV may cause the TV falling. Do not let chlidren climb or hang on the TV. Always place the TV on a sturdy, level, stable surface that can hold the weight of TV. And if possible, secure the TV according to the instruction below (Note: The fastening components such as screws are not supplied with TV).
Step one: Insert the M6 mounting screws into the upper two wall mounting screw holes and fasten them (Figure B). Step two: Insert anchors to wall and connect the bolts and anchors with ropes or chains (Figure C).
cable system is grounded to provide some
eaning.
ed service personnel.
Preparation for Your New TV
Before Turning On TV
Check Accessories
Check the accessories that are packed with your TV. (refer to Quick Start Guide)
Setup TV Table Stand
Please refer to Quick Start Guide to carry out stand installing.
Select TV Location
Select a flat, stable table to place your TV set. Please follow the safety instructions when placing the TV.
Connection and Using
After placing your TV properly, you can connect the TV with power supply and cable components. For further information, see page 5 to page 6.
TV Signal Connection
The first step in connecting your TV is obtaining the signal. Your TV LED32C45RQ has a back panel, which allows you to receive
54
analog and/or digital televi sion channels via ANT/CABLE jack. Before connecting your TV, determine using an antenna or a cable service to obtain the signal.
A. Antenna
Connect the antenna to TV via coaxial cable on ANT/CABLE jack of the back panel. You are ready to receive air local analog channels.
B. Cable TV service
Connect the cable TV wall jack to TV via coaxial cable on ANT/CABLE jack of the back panel. You are ready to receive off-air local digital and analog channels.
C. Set-Top Box
If you use a set-top box, you may need to call your cable company or satellite service provider, which use a special connection, please refer to the user’s guide of set-top box.
Note: Do not plug the AC cord until you have accomplished all the connections. This TV does not support QAM under cable channel search.
digital and
Cable Connections
Choose Your Connections
TV LED32C45RQ supports various connections to other devices (such as DVD, VCR, Set-top box, etc.). Ple choose the cables which adapt to your device.
Note: HDMI, the HDMI logo , and Hig h-D efi nition Multi med ia Int erfac e are trade mar ks or regi stere d trade marks of HDM I Licensing LLC
Caution: Unplug the AC cord when you connect other devices to TV.
ase follow the table to
Side Panel Connections
Connecting AV Composite device
Composite connector will be shared with Component Y connector. To connect a composite AV device, such as a DVD player, follow these steps:
1.Connect the COMPOSITE jack on the side of TV to the video output jacks of device via video cable (yellow).
2.Connect the L-AUDIO-R jacks on the side of TV to the audio output jacks of device via audio cable. Notice the left c hannel jack and p lugs are white and the right channel jack and plugs are red.
Note: AV signal belongs to composite video. This kind of video signal has regular good display quality.
Composite Video Connection
The picture below is an exam ple of a con nection using th e composite video jack.
(Good Video Quality)
HEAD PHONE:
Connect your USB storage device to enjoy music/photo files
USB:
on your TV. (Also used for service purpose).
HDMI IN
HDMI1/DVI, 2: (High-Definition Multimedia Interface) It provides an uncompressed digital connection that carries both video and audio data by way of an integratedmini-plug cable. MHL: (Mobile High-Definition Link) To standard HDMI input, transmit the video/audio from portable electronic device (cellphone,digi­camera, digi-video) to TV set. ARC: (Audio Return Channel)
be connected to the device supporting ARC, transmit the TV sound to the device.
COMPONENT Y/Pb/Pr: Connect a device that has component video jacks, such as a DVD player. To access device connected to the Y/Pb/Pr jack, press the INPUT button on your remote; then press the up/down arrow to select Component. Press the OK
button at last to c
Y/Pb/Pr (Component Video):
because the video signal is separated into three components. Use three video-grade or component video cables for the connection. When using Y/Pb/Pr, make sure you connect left and right audio cables to the AUDIO IN R/L jacks.
L-AUDIO-R, COMPOSITE:
composite video jacks, such as a VCR or a DVD player. To access device connected to these jacks, press the INPUT button on your remote; then press the up/down arrow to select AV. Press the OK button at last to confirm.
AUDIO IN L:
connector is usually white. For mono audio sources, be su use the left AUDIO INPUT.
AUDIO IN R:
connector is usually red. ANT/CABLE: Connect to receive the signal from your antenna or
cable via coaxial cable. Digital Audio out: Connect a coaxial cable for digital audio
output.
6 7
Connecting YPbPr Component device
(Better Video Quality)
To connect a component device, such as a DVD player, follow
these steps:
1.Connect the COMPONENT IN Y/Pb/Pr jack on the side of TV to the video output jacks of device via video cable (green, blue and red).
2.Connect the L-AUDIO-R jacks on the side of TV to the audio output jacks of device via audio cable. Notice the left c hannel jack and p lugs are whi
channel jack and plugs are red.
Note: Y/Pb/Pr jacks are component video. This kind of video signal has better display quality.
Component Video Connection
The picture below is an example of a connection using the component
video jack.
5 6
te and the right
2. HDMI-DVI cable transfers only video signal from DVI port of DVI device to HDMI jack of TV. For audio signal, please connect audio output to L-AUDIO-R jack on TV back panel.
HDMI Connection
The picture below is an example of a connection using the HDMI video jack.
Keypad and Front Panel
How to Obtain Various Kinds of Input Sources
After connection is done, press INPUT button on remote control or TV top panel to choose the input source you need. See page 7, Basic Operation of TV.
Keypad Buttons
If you cannot locate your remote, you can use the keypad buttons on your TV to operate many TV features.
TV Jacks Explanation
Connecting HDMI device
To connect a HDMI device, such as a DVD player, please Connect the HDMI1/DVI/MHL, 2/ARC jack on the side of TV to the output jacks of device via HDMI cable. To connect a DVI device, via DVI port of PC or Device and HDMI jack of TV:
1. Connect the HDMI1/DVI/MHL jack on the side of TV to the DVI port of PC via HDMI-DVI cable.
2. Connect the L-AUDIO-R jack on the side of TV to the audio output jack of computer with audio cable (dual-channel RCA jacks
stereo jack or the L-AUDIO-R jack).
to 3.5mm To connect an ARC HDMI OUT device, please connect to the HDMI input port of the device such as amplifier,
Note: 1. HDMI (High-Definition Multimedia Interface) is a compact audio/video interface for transmitting uncompressed digital data. It carries the audio and video signal via the same cable and has the best display quality.
(Best Video Quality)
Connect a 3.5mm headphone for personal audio.
Adopted in TV output of digital audio, can
onfirm.
Left aud io channe l connec tion. The lef t audio
Right audio channel connection. The right audio
Displays the Source Select List.
Displays the TV Main Menu.
Scans up through the channel list. In the TV menu system, it acts like the up arrow on the remote control and can be used to select menu options.
Scans down through the channel list. In the TV menu system, it acts like the down arrow on the remote control and can be used to select menu options.
Increases the volume. In the TV menu system, it acts like the right arrow on the remote control and can be
used to select menu options.
Decreases the volume. In the TV menu system, it acts like the left arrow on the to select menu options.
Turns the TV on and off.
They provide good picture quality
Conn ect an AV devi ce that has
remote control and can be used
re to
Front Panel
About remote control working distance and angle, see the start guide.
Power/Standby Indicator: Light up in red when the TV is in standby mode. Light out when the TV is on.
Remote Control Sensor:
receives infrared ray sent by remote control.
Codes for Cox Communications: 0178
Codes for Comcast: 10178
Codes for Dish Network: 627
Codes for Fios Verizon: 0205, 0057, 0493, 0775
quick
Remote Control Sensor
Power/Standby Indicator
Remot e contr
ol IR s ensor, wh ich
Basic Operations
Turning On and Off
Connect the AC cord to power the LED LCD TV. At this time the
enter standby mode and power indicator will turn red. Use
TV will Power button ( ) on the top panel of TV or on the remote control to turn on the TV. After switching off the TV for 5 seconds, you can turn on TV again.
Choosing TV Channel
Tuning To Analog Channels
an ana log channel has a channel number beginning with “A”. Input the digital number with numeric buttons directly and press
OK button to confirm. For example, to watch analog channel “A51”,
press “5”, “1”, “OK” on remote control in sequence.
Note: Although there is no analog TV signal available in America, we reserve ATV functions for some expansible use.
Tuning To Digital Channels A digital channel has a channel number beginning with “D”. Input
the main digital number with numeric buttons directly, then pr “ ” button on remote control, and input the sub number at last. For example, to watch analog channel “D31-1”, press “3”, “1”, “ ”, “1”, “OK” on remote control in sequence.
Changing Channels Directly You can use CH button to increase channel number and CH to decrease channel number. When no OSD (On Screen Display) is used, the up/down arrows can also work as CH /CH buttons.
Selecting Input Source
Pr e ss I NPU T but ton o n rem o te control to display Source Select list. Use up/down arrows to highlight the source you need and press OK to confirm.
Move
USB
ess
OK
Select
Channel Bar
Press the OK button on the remote control, when OSD (on-screen display)is not used, the channel bar will appear on the Bottom of the screen. It displays the current channel’s information. The following list describes the items on the channel bar.
D14-1 ATSC-1
Air 4:3
Jan-01 07:10 Sat
D14-1/A2
ATSC-1
English/Stereo
480i/480i
4:3/CC
Jan-01 07:10 Sat
English
480i
If the channel is analog, A is displayed. If it’s a digital channel, D is displayed. For example, in the pictures above, A2 is an analog channel, and D50-1 is a digital channel ( -1 is a sub-channel number). Display the current channel number
Displays whether the current channel is being broadcasted in stereo or mono. If the current channel is digital, this space will be SAP (Seco nd Audio Prog ram) language.
Displays the signal resolution.
Di sp lay s the scr ee n as p ec t ra ti o. Display the CC status (on or off).
Displays current program date and time.
A2
Air
CC
DTV ATV
Stereo
Jan-01 07:10 Sat
480i
Adjusting Volume
Press the VOL+/VOL- button on the remote control to adjust the volume. If you want to switch sound off, press MUTE. When OSD (On Screen Display) is not used, the arrows left/right can also work as VOL-/VOL+ buttons.
EPG (Electronic Program Guide)
Press EPG button on the remote control, the electronic program guide will appear in the center of screen. The electronic program guide gives the TV program playing project. You can use left/right arrows to switch pages.
OSD Menu Operations
Adjust the OSD Screen
The OSD (On Screen Display) menu enables you to approach to the TV functions.
To use OSD menu system, press OK button on remote control, then use left/right arrow to highlight an option from QUICK, CHANNEL, PICTUR E, AUDIO, TIME, SETUP or LOCK and press OK/down button.
Press the up and down arrow to move to a different option within each menu. If necessary, press OK or right arrow to display the choices of the option you’ve highlighted. If available, use the text at the bottom of each screen for help. To return to the previous menu, press the MENU button.
To exit the OSD menu:
• Press the HOME button. The menu will clear from the screen.
• Press the MENU button repeatedly until the menus disappear.
Quick Menu
The Quick Menu contains menus and provides you a quick way to approach the main settings that may be most possibly and frequently approached. Press MENU on the remote and then you will see the Quick Menu showing on your screen. Press the down button to proceed the Quick Menu. Use up/down to choose the function you need, press OK to enter a sub-menu and press left/right arrow to adjust a sub-menu.
Picture Mode
Sound Mode
Closed Caption
MENU
MENU
Off
Return
Air
Good
Return
QUICK MENU
Move Select
Channel Menu
The Channel Menu enables you to search, view and edit channels. It is available in TV mode only. Press MENU and choose CHANNEL from the Main menu. Press the CHANNEL menu.
CHANNEL
Move Select
Use up/down to choose the function you need, press OK or right arrow to adjust or enter a sub-menu. The detailed explanation are shown below.
Auto Scan
Execute an auto channel search.
Show / Hide Enter sub-menu and press
Channel List
Displays a channel list. It shows the current channels. Press OK to go to TV channel directily in sub-menu.
Sleep Timer
Channel List
OK
OK
/down button to proceed to
Auto Scan
Show / Hide
Channel List
Signal Type
DTV Signal
OK
OK
to show or hide the TV channel.
Signal Type
Select your TV signal type: Air or Cable.
DTV Singal( In DTV Mode)
Display how strong your TV signal is.
Picture Menu
The Picture Menu contains menus and controls to configure the way the picture appears. The Picture Menu options apply to the video for the main TV and VIDEO INPUT selections. All picture options can be applied to each input. Press MENU on the remote. Select Picture from the Main menu. Press the OK/down button to proceed to PICTURE menu.
OK
or right
PICTURE
Picture Mode
Color Mode
Screen Size
Noise Reduction
Dynamic Contrast
Video Style Video
Warm
Wide
Low
Low
Use up/down to choose the function you need, press arrow to adjust or enter a sub-menu. The detailed explanation are shown below.
Sound Mode
Choose the preset sound mode of your TV: Standard, Soft, User, Dynamic. Only in User mode you can adjust Bass, Treble, Balance.
Bass: Adjust the bass component of TV sound.
Treble: Adjust the treble component of TV sound.
Balance: Adjust the balance betwee
n the left and right channel.
Audio Language
Move Select
Use up/down to choose the function you need, press OK or right arrow to adjust or enter a sub-menu. The detailed explanation are shown below. If available, use the text at the bottom of each screen for help.
OK
MENU
Return
Picture Mode
Choose the preset visual mode of your TV: Standard, Movie, User, Dynamic, Power Saving. (Only in User mode you can adjust Brightness, Contrast, Color, Tint and Sharpness. Changes to Power Saving mode can decrease the power consumption.)
Brightness: Adjust the brightness of picture.
• Contrast: Adjust the contrast of color.
• Color: Adjust the richness of color.
• Tint: Adjust the balance between red and green level (only
available in NTSC signal).
• Sharpness: Adjust the sharpness level of picture.
Color Mode
This option allows you to select one of three automatic color adjustments: Cool for a bluer palette of picture colors; Normal or Warm for a redder palette of color.
8 9 9 10 1011
Screen Size
Screen Size: Select a screen aspect ratio. (Available ratio: Wide, Cinema, Zoom, and Normal.) Please choose the ratio that applies to your video signal format best.
Noise Reduction
Set noise reduction as Off/low/Medium/High.
Dynamic Contrast
Set dynamic contrast Off/low/Medium/High.
Video Style
If you connect the HDMI/DVI port of PC to HDMI jack of the TV and the video signal is 1080p, please choose the compatible video style: Video, Graphic.
Note: Noise reduction helps to reduce the picture “static” or any type of interference. This feature is especially useful for providing a clearer picture in weak analog signal conditions.
Audio Menu
The Audio Menu lets you adjust aud io outp ut. To a ccess the Audio Menu, press MENU on the remote, and then select Audio from the Main Menu. Press menu.
AUDIO
Move Select
OK
/down button to proceed to Audio
Sound Mode
MENU
English
STEREO
PCM
Off
Return
Audio Language
Analog Audio Output
Digital Audio Output
Surround
Audio Only Off
OK
Select digital TV audio language type: English, French or Spanish (only available for DTV channel).
Analog Audio Output
Select analog TV audio sound type: Stereo, SAP or Mono (only available in TV mode).
Digital Audio Output
Set the audio output type as Off, PCM or Raw. Please set this option according to your power amplifier.
Surround
Creates a 3D sound surround from standard stereo material, with deep and rich enhancement.
Audio Only
Press OK button to activate audio only mode. The TV will
output only sound and the LED LCD panel will be turned off. To restore normal playing, hold POWER button for three seconds.
Auto Volume
Set auto volume control on/off.
Equalizer Settings
The seven-band graphic equalizer allows you to adjust the audio frequency settings. You can select one of the equalizer presets
Rock, Jazz) or create your own personal preset (User).
(Off, Pop, Press the left or right arrow to select the frequency (100Hz, 250Hz 500Hz, 1KHz, 2KHz, 4KHz, 10KHz). you want to adjust. Use the up or down arrow to adjust.
Time Menu
The Time Menu lets you config the TV time opt ion. To access the Time Menu, press MENU on the remote, and then select Time from the Main Menu.
Sleep Timer
Time Zone
Auto Clock
TIME
Move Select
Use up/down to choose the function you need, press arrow to adjust or enter a sub-menu. The detailed explanation are
Clock
Wake Up
OSD Display Duration 15 Sec.
OK
2014/1/18 12:0 PM
shown below.
Sleep Timer
Set the sleep timer(Off, 5, 10, 15, 30, 60, 90, 120, 180, 240 Min.). The TV will automatically enter standby mode after times up.
Time Zone
Showing the country’s time zone. you can Set Time zone Off Eastern, Central, Mountain, Pacific, Alaska, Hawaii, Samoa, Newfoundland, Atlantic.
Off
Eastern
On
----/--/-- --:--
MENU
Return
OK
or right
Auto Clock
Select auto clock on/off. Auto clock helps you synchronize your TV time to standard time (from DTV signal).
Clock
Set your TV time manually (needs to turn off auto clock). press up/ down and left/right arrow to config the current time.
Wake Up
Set the Wake Up time for your TV. after enters menu, you can use the up/down and left/right arrow on the remote control to adjust it.
OSD Display Duration
Set the time how long to display OSD menu(5 Sec, 15 Sec, 30 Sec, 45 Sec, 60 Sec).
Setup Menu
The Setup Menu lets you config the TV with your preferences. Select SETUP from the Main Menu. Press SETUP menu.
Menu Language
Menu Transparency
Closed Caption
SETUP
Move Select
Use up/down to choose the function you need, press arrow to adjust or enter a sub-menu. The detailed explanation are shown below.
Menu Language
To choose your menu language, press the left/right arrow until the language you need appears. Available languages: English, French and Spanish.
Menu Transparency
To choose your menu transparency mode, press the left/right arrow until the transparency you need appears: 0%, 25%, 75% 100%.
All reset
Initial Setup Wizard
Blue Background
Closed Caption
Press OK to enter closed caption sub-menu, the detail as follow:
Caption Display
Digital Caption Type
Digital Caption Style
SETUP
Closed Caption
Show or hide closed caption
Move Change Setting
OK
/down button to proceed to
English
0%
On
OK
MENU
MENU
Return
OK
CC Off
Return
or right
Caption Display
Press left/right arrow to select caption display cc on or cc off.
Digital Caption Type
Press left /right arrow to select digital closed c aptio n typ e: Servi ce1, Service2, Service3, Service4, Service5, Serv ice6.
Digital Caption Style
Press left/right arrow to go to digital closed caption style sub-menu, to select the closed caption style. Select the item you want to adjust in Digital CC Style menu with up/down arrows. After changing, you can preview the caption style in the bottom.
Mode: Decide whether you can change the settings on the CC Display Style.
• CC Size: Set the CC font size (Default, Normal, Large, Small).
• CC Font: Set the CC font (Default, Font 0 - 7).
• CC Opacity Color: Set the CC opacity color (Default, Solid,
Flashing, Translucent, Transparent).
• Text Color: Set the CC text color (Default, White, Red, Green,
Blue, Yellow, Magenta, Cyan).
• CC Background Opacity: Set the CC background opacity (Default,
Solid, Flashing, Translucent, Transparent).
• CC Background: Set the CC background color (Default, White,
Red, Green, Blue, Yellow, Magenta, Cyan).
All reset
Press OK button to execute reset to TV system. All the settings will be reset to factory default.
Note: The OSD’s appearance and color are referred to the actual appliance.
Blue Back
Press OK button to select Blue Back on or off. If the Blue Back is turned on, the TV will display a blue background when there is no signal input.
No Signal Power Off
Press left/right arrow to select a time period (Off, 1 Min, 5 Min, 10 Min) for “No Signal Power Off”. The TV will shut off after that period of time while no signal. We suggest you turn on this function when Blue Back is turned on. It may hurt the LED LCD panel if blue screen is on for too long.
ARC
Adopted in TV output of digital audio, can be connected to the device supporting ARC, transmit the TV sound to the device.
Lock Menu
The Lock Menu enables you to lock program with special content, panel key board and input source. Press MENU on the remote and choose Lock Menu from the Main Menu. Press the down button to proceed the Lock Menu. The menu image and explanation are shown below.
MENU
----
Return
Parental Control
LOCK
Move Select
OK
Parental Control
• When the Parental Control Menu is accessed from the Main Menu, you need to enter password to unlock the menu function. Please enter your four-digit password with numeric keys 0~9. Note: The
original password is “0000”.
• After unlocking, the items in parental control menu can be used.
Use arrow up/down to highlight the function you need and press
OK
or right arrow to use V-chip, Change Password, Keypad Lock
and Source Lock, Clear Channel List sub-menu.
Change PIN
Input Block
V-CHIP
LOCK
Parental
Control
Move Change Setting
Change PIN
Change the PIN of parental menu.
Input Block
This option allows you to lock or unlock the input source. The source blocked can not be chosen from input list unless you input the correct parental password. source, press
V-Chip
OK
to enter V-Chip sub-menu, the detail as follow:
Press
LOCK
V-CHIP
Restrict movie and TV programs by US Ratings
Move
US V-Chip
Press OK to en ter US V-Chip ratings menu, which con tains two sub-me nus: TV rating and Movie Rating.
TV Rating
Similar with Movie Rating. After adjusting, press MENU to return or press HOME to exit the menu.
Rating
Age-Based Ratings
All Children
TV-Y
Directed to Children 7
TV-Y7
Years and Older General Audience
TV-G
Parents Guidance Suggested
TV-PG
TV-14
Parents Strongly Cautioned
TV-MA
Mature Audience Only
Movie Rating
Use arrow keys to select the rating level you want to block, press OK
to lock/unlock the rating level. If you have blocked a lower level rating, the higher ratings will be blocked too. For example, when PG-13 is blocked, R, NC-17 and X will be blocked at the same time.
General Audience (no restrictions).
G
Parental guidance suggested.
PG
Parents strongly cautioned.
PG-13
Restricted. Children under 17
R
shuold be accompanied by an adult.
No children under age 17.
NC-17
Adults only.
X
Keypad Lock
Clear Channel List
Remote
Change your 4-digit PIN
OK
OK
to lock or unlock it.
US V-CHIP
Canada V-CHIP
Block UnRated Show
Downloadable Rating
Clear Downloadable Data
OK
Change Setting
DetailRating
Execute
Off
MENU
Return
Use up/down arrow to select the
MENU
Return
Content Themes
D
Sexually Explicit Dialogue
L Adult Language
S Sexual Situations
V Violence
FV Fantasy Violence
Canada V-Chip
Press OK or right arrow to enter Canada V-Chip ratings menu, which contains two sub-menus: English Rating and French Rating.
English Rating
Press OK to enter English rating menu. Use arrow keys to select the rating level you want to block, press level. If you have blocked a lower level rating, the higher ratings will be blocked too. For example, when PG is blocked, 14+ and 18+ will be blocked at the same time.
DetailRating
Programming intended for children under age 8.
C
Programming generally considered acceptable for
C8+
children 8 years and over to watch on their own.
G
General programming, suitable for all audiences.
PG
Parental Guidance
Programming contains themes or content
14+
which may not be suitable for viewers under age of 14.
Adult programming
18+
French Rating
Press OK to enter French rating menu. Similar with English Rating.
General
G
Programming generally considered acceptable for
8ans+
children 8 years and over to watch on their own. Programming may not be suitable for
13ans+
children under the age of 13. Programming is not suitable for
16ans+
children under the age of 16.
18ans+
Programming restricted to adults.
Note: These ratings are available only if the broadcaster is sending rating information.
Block Unrated Show
Block all the unrated program.
Clear Downloadable Data
Activate or downloadable rating data. if available.
Keypad Lock
Select this option to block or unblock the TV’s side panel buttons so that they can’t be used.
Clear Channel List
This option allows you to execute C lear Channel List function. This function will reset the whole TV system to factory default (not only reset OSD menu).
Remote
select your remote: Off, remote1 or remote2. this is for special purpose.
DetailRating
OK
to lock/unlock the rating
Frequently Asked Questions (FAQs)
What’s the most convenient way to view High Definition (HD) video?
Conn ect an anten na to t he TV In put jack to v iew free local dig ital channels. You may need to purchase an antenna. (See page 5 for information about antenna setup).
it www.antenn aweb. org for assis tance i n deci ding what type of
Vis antenna to use to receive the lo cal digital channels available to you. After entering your location, this mapping program tells you which local analog and digital stations are available using a certain antenna.
Are there other ways to view High Definition(HD) video?
Besides using an antenna as mentioned above, you can also use a top box to receive digital video. Contact your cable s ervice provider or satellite provider to purchase digital programming and have them connect the box to ensure you are viewing channels in the best way.
more
set-
How do I tell an analog channel from a digital channel?
Press the OK button to display the Channel Bar.
(on-screen display)is not used,
screen. An “A” is displayed for an analog channel. A “D” is displayed
for a digital channel.
Note: Since t he analog TV in America has been cut o ff, we reser ve analog TV function only for some unexpected use.
Why are there bars on my screen, and can I get rid of them?
Most digital video is sent in a 16/9 format which fills your screen, but is sometimes sent in 4/3 which does not fill your screen. It depends on how the station or device connected to your TV is formatting the video. If there are bars on the screen, Check Screen size in the picture mode to try a different format that may eliminate the bars. Some bars can't be removed beca use of the way t he format i s sen t by the broadcaster. The format changes as you choose screen size type in the picture mode and the format type is displayed at the bottom of the screen. For more information on screen size, go to page 9.
Why does channel search find a lot of channels, but when I try to tune to them, there’s nothing there?
Some channels don’t carry programming, such as video On Demand. When channels are unavailable, your TV screen is blank or appears like snow. You probably want to remove these channels from your channel list. Remove these in the Channel List Menu. Go to information.
Why does it take a long time when I search the channels at first time?
If you have both analog and digital channels, the TV is looking for all available channels in the channel list. If you do have digital channels, the TV is also searching for scrambled channels, non-scrambled channels, and each sub-channel of that digital channel.
Look at the top right corner of the
when OSD
page 8 for more
Troubleshooting
Identifying Problems
If there are any problems when using the product, please consult the list below. If the list does not solve t he problem, call our Cu stomer Service Center immediately.
TV Problems
The TV can’t be turned on.
Make sure the AC cord is plugged in.
- Check the wall outlet, make sure the AC output works normally and stably.
- The side panel may be locked (disabled). Use the remote control to turn on the TV.
- Select the Keypad Lock function in the PARENTAL control Menu and press OK to uncheck the locking status.
There is no picture or sound but the TV is on and there is a “No Signal” sign on screen.
- Are you trying to use an input source with no device connected to it? For using other video/audio device, make sure the external device works normally first, th input source.
- The Signal Type option may be set incorrectly. Go to page 8 for detailed instructions.
- The channel may be blank. Try to search the channel again or change another channel.
The sound is fine, but the picture is poor.
- If you can only get black and white pictures from external device that you've connected to your TV, maybe it is due to the video
en press INPUT and choose the right
cables is not connected well, or they are connected wrongly.
Check the connection stability first, then check the correctness. For AV input, the yellow video cable connects to the yellow Video In jack on the side of your TV.
For Component input, the three Y, Pb, Pr video cables (red, blue, and green) should be connect to the corresponding input jacks
on the side of your TV.
- Check the antenna connections. Make sure all of the cables are firmly connected to the TV jack on side of your TV.
- Try adjusting the color features to improve.
There is no sound, but the picture is fine.
- The sound might be muted. Try pressing the MUTE button to restore sound.
- For using AV or Component, remember to connect the device’s left and right audio output correctly. The left channel cable is white and the right channel cable is red. Please ma
to their colors.
- The sound settings may not be set correctly. Go to page 9 for more information.
- If your audio source has only one jack or is a (mono) audio source, make sure you have plugged the connection into the Audio In L jack (white) on the TV.
The buttons on the side panel don’t work.
- The side panel may be locked (disabled). Use the remote control to turn on the TV.
- Select the Keypad Lock function in the PARENTAL control Menu and press OK to uncheck the locking status.
- Unplug the TV from the AC power for 10 minutes and then plug it back. Turn the TV on and try again.
The TV turns off unexpectedly.
- The electronic protection circuit may have been activated because of a power surge. Wait 30 seconds and then turn the TV on again.
If this happens frequently, the voltage in your house may be abnormal.
If the other electronic e quipment i n your home can’t work normally, consult a qualified service personnel.
Can’t select a certain channel.
- The channel ma y be blocked or not a pproved in the P ARENTAL control Menu.
- The channe l may be s kipp ed in ch annel list in CHANN EL Menu.
Check the blocking and skipping status of channel.
The stereo sound performance is bad.
- It may be a weak station. Use the AUDIO Menu and set Analog Sound as
Mono.
A black box appears on the screen.
- Closed captioning might be on. Check Closed Caption in the SETUP
menu. Go to page 10 for more instructions.
Problems with the HDMI Connection.
- Make sure the HDMI device (DVD, video gamer, etc.) is turned on and the
cables are firmly connected. If problems still occur, turn off your device and reconnect it. Reset the
power by unplugging the power cord and plugging it again.
- If a “No Signal” message appears on screen , the HDMI device
isn’t responding. Contact the manufacturer of the HDMI device for further assistance.
- If you hav e black
means the TV can not display a full-screen image), the device you connected might have a switch or a menu option allowing you to change the picture quality output that will fix this. Choose either 720p or 1080i.
bar s on eac h side of you r pictu re (whic h
tch the cables and jacks according
The Remote control doesn’t work.
-Th er e may be an AC power fail ure or th e powe r cord unplugged in.
- Something might b e b locking between t he remote control and th e remote sensor on the front panel of the TV. Make sure there is a clear path.
- The remote may not be aimed directly at the TV.
- The batteries in the remote may be weak, dead, or installed incorrectly. Put new batteries in the remote.
You are experiencing problems with V-Chip/Parental Controls.
- If the rating limits don’t work, you must lock the settings. Go to the Main Menu (press MENU on your remote), select PARENTAL control to check the settings.
What else can I do?
If you’ve been thro ugh the Troubleshootin g s ection and nothing has fixed your problem, try rebooting your T
Note that af ter a reboot , you may need to r un your TV thro ugh the setup process again. To reboot, unplug the power cord from the wall outlet or power strip.
Keep your TV unplugged for about 5 minutes. Then plug in the TV and turn it on. See if the problem is fixed.
If the problem remains, then please visit the Customer Support Menu at www.rca.com or updated FAQs or contact RCA Customer Support at
the support number provided in your Warranty card.
V.
Wall Mounting Unit Specication
200
mm
1213
100
mm
Model Unit Dimension (unit:mm) Screw
LED32C45RQ VESA 200 x 100 M6 screws, length 10mm
Note
A. The wall mount is not contained in the accessories sold with television. We only provide the installing specifications but not the wall mount itself. If you need the mount, please consult with the local dealer for a VESA
wall mount.
B. We st rong ly suggest to set the wall mount with equi pmen ts of specificati on w e o rdered. If n ot, inappropriat e inst allin g may cause
damage to device or peop
C. We suggest that you keep your TV at least 2.36 inches(60mm) from the wall to prevent cable interference.
Warnings
1. Do not set up the wall mount by yourself. Please contact qualified professionals for installation.
2. The TV should not be mounted on walls or surfaces which have an angle more than 10 degrees with vertical direction. Otherwise
the TV set may fall.
3. The walls for mounting must have enough strength to hold the whole weight of TV set. For example, concrete wall and brickwork
le.
are eligible. Do not place the mount on soft walls such as earth walls and plasterboard.
4. If spare parts of different specifications (such as screws) are used during mou nting, con sult with quali fied profess ionals to make sure these parts are safe and effective.
5. Before attaching the base to wall, ensure the holes for anchors are in keeping with the installing rules. Otherwise there may exist some potential problems.
6. Do not place any heating source under your television. Or else, it can cause fire.
7. Do not place the TV near anything dripping. Transducers and high voltage wires should too . Or else, it may caus e creepage , elect ric shock or bad resonance.
8. Do not place TV in a location where collisi on or vibr ation is liable to happen.
9. In order to avoid unexpected falling of the TV set, do not put any strong force on TV or wall mount after installing.
10. Be sure to unplug the TV before installing. Keep anything hard or sharp away from the screen panel to prevent the scuffing.
11. After installing, if there is any need to move the cabinet, please contact the qualified professionals.
be kept far away from the apparatus
USB Media Play
With USB Media Play, you can enjoy music and photo files stored in a USB storage device on your RCA TV.
Connecting a USB storage device
- Connect a USB storage device to the USB port in the back of the TV.
- Press “INPUT” and select “USB”.
- “USB Media Play” menu will appear.
USB 2.0
PHOTO MUSIC MOVIE
Playing back Photo files
- Press arrow ( ) to select “Photo” and press “OK”.
- The file or folder list will show up. Press arrow( ) to select a file or folder. Press “OK” , and you will be photo files.
- You can directly open and playback the file. View thumbnails for photo preview, or play slideshow.
Playing back Music files
- Press arrow ( ) to select “Music” and press “OK”.
- The file or folder list will show up. Press arrow( ) to select a file or folder. Press “OK” to playback the music file you selected.
Playing back Movie files
- Press arrow ( ) to select “MOVIE” and press “OK”.
- The file or folder list will show up. Press arrow( ) to select a file or folder. Press “OK” to playback the movie file you selected.
Playing back Text files
Similar to the photo menu. You can use TEXT menu to access and display text on your mobile devices.
given several options to view
TEXT
Media Support Specification
Supported Files
Photo
Music
Movie MPG files
Supported USB storage/file system format
USB Storage USB flash drive
File System format FAT32
Caution: Do not turn off the TV or disconnect USB storage device while the TV is playing back picture or music. This may result in loss of data or damage to the USB storage device, and RCA is not responsible for any damage to, or loss of, data on the USB storage device.
JPG/JPEG files
WAV files
Product Specication
Model
Diagonal Display Size
Television System
Channel Coverage
Temperature
Humidity
Power Supply
1314
Dimensions
Notice: Specifications and cabine t d esign are subject to change wit hout notice.
RF input
Connection
Video input
Interface
Audio input Audio output
Resolution
Component/HDML mode
With stand Without
stand
With stand
Weight
Without stand
Power Consumption
Limited Warranty for USA
Coverage - Labor
For a period of 12 months from date of pu rchase of your RCA product, we will pay an authorized RCA service center the labor charge to repair any television.If your television is unrepairable we will provide you with a refurbished unit of the same or better model.
Coverage - Parts
For a period of 12 months from date of pu rchase of your RCA produ ct, we will pay an authori zed RCA serv ice center for the new,or at o ur option, refurbish ed repl aceme nt parts need ed to repair any defects in material or workmanship in your television. If your television is unrepairable we will provide you with a refurbished unit of the same or better model.
Coverage - LED LCD Panel
For a period of 12 months from date of pu rchase of your RCA produ ct, we will pay an authori zed RCA serv ice center for the
LED32C45RQ
31.5 inches American TV standard
ATSC/NTSC system
VHF : 2~13 UHF : 14~69 CATV : 1~135 Storage Temperature is
-20 ~ +60 Operating Temperature is 0
~ +50
Storage Humidity : Less than 85%RH
(No condensation)
Operation Humidity : Less than 80%RH
(No condensation) AC 100-120V, 60Hz Cable/Antenna × 1 AV × 1 Component × 1 HDMI × 2 AV × 1 Headphone × 1, Digital Audio Out × 1 1920 × 1080
480i, 480p, 720p, 1080i, 1080p
28.9”W × 19.2”H × 6.9”D
28.9”W × 17.4”H × 3.1”D
14.8LBS(6.7KGS)
12.1LBS(5.5KGS)
less than 42W
+
~ +140
-4
32 ~ +122
defects in materials or workmanship in your
new, or at our option, refurbished LED LCD panel needed to repair any defects in material or workmanship in your television. If your television is unrepairable we will provide you with a refurbished unit of the same or better model.
How to Obtain Service
For assistance (U.S.A) - if you purchased RCA product in U.S.A, please call 1-888-977-6722. Or visit www.rca.com
The service representative will review your options for service.
As a co nvenience we offer thre e ways to obtain warrant y ser vice.
You m ay mail your produ ct to the address provided by t he serv ice representative, you may take your product to an a uthoriz ed service center, or you may request in home s ervice (servicer will determine if product is serviceable in home or must be taken back to local service cente r for repair). Service representat ive will supply i nstructions f or preferred service. At the ti me of service proof of purchas e such as origi nal receipt, will be required. Only 37” LCD s ize and a bove are applicablefor in-home-service.
Items Not Covered By Limited Warranty
Your limited warranty does not cover the following items:
-Un-installation, in stallation and adjustment of customer controls and operating instruction.
-Batteries and customer replacement fuses
-Damage due to misuse, abuse, negligence or neglect including but, not limited to, damage resulting from exposure to moisture, humidity or salt.
-Inability to receive a signal due to problems not caused by the product.
-Damage to the product due to images burnt into the screen.
-P rod uc t purc ha sed or serv ic ed out si de of Co untry of Or ig in al Purchase.
-i.e . Purc hase d USA can not be servic ed in M exic o/Pu rcha sed in Mexico can not be serviced in USA.
-Product modified or incorporated into other products.
-Damage due to acts of nature, including but not limited to,lightning damage or flooding.
-S er vi ce ca ll s whi ch do not inv olve any def ect in mater ials or
workmanship.
Commercial Use Excluded
This li
mited warrant y only applies to products used f or personal use and does not cover any product used for institutional, commercial or rental purposes.
LIMITATION OF WARRANTY
THIS LIMITED WARRANTY IS THE SOLE AND EXCLUSIVE WARRANTY APPLICABLE TO THIS PRODUCT. ON CORP US, INC., THE MANUFACTURER OF THIS PRODUCT, DISCLAIMS ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE). NO VERBAL OR WRITTEN INFORMATION GIVEN BY ON CORP US, INC., ITS AGENTS, INDEPENDENT CONTRACTORS, SALES REPRESENTATIVES, EMPLOYEES, RETAIL DEALERS, WHOLE SALE DISTRIBUTORS OR ANY OTHER THIRD PARTY SHALL CREATE A GUARANTY OR INCREASE. EXPAND OR MODIFY THE SCOPE OF THIS LIMITED WARRANTY.
THIS LIMITED WARRANTY PROVIDES THE SOLE AND EXCLUSIVE REMEDY FOR THE CONSUMER OF REPAIR OR REPLACEMENTOF THE PRODUCT. ON CORP US, INC. SHALL NOT BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THEP RODUCT OR ARISING OUT OF A BREACH EXPRESSED OR IMPLIED WARRANTY ON THIS PRODUCT.
THIS LIMI TED WARRAN TY AND THE DISCLAIMERS CONTAINED HEREIN ARE GOVERNED BY THE LAWS OF THE STATE OF INDIANA. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS LIMITED TO APPLICABLE LIMITED WARRANTY PERIOD(S) SET FORTH ABOVE.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU ALSO MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.
RCA is a trademark of RCA Trademark Management
SAS and used under license by ON Corporation
Garantia limitada para EE.UU
Cobertura-Trabajo
Durant e un period o de 12 meses d esde la fech a de compra de su producto RCA, pagaremos a un centro autorizado de servicio de RCA el cargo de mano de obra para reparar cualquier defecto en materiales
o mano de obra en el televisor.
Si su te levis or es ir repar ab le qu e le prop orcio na ra un a unidad reacondicionada del mismo modelo o superior.
Cobertura / Recambios
Durant e un period o de 12 meses d esde la fech a de compra de su producto RCA, pagaremos a un centro autorizado de servicio de RCA para un reemplazar ya sea con partes nuevas o reacondicionadas, o a nuestra opcion, para reparar cualquier defecto del material o mano de
obra en el televisor.
Si su televisor es irreparable que le proporcionara una unidad reacondicionada del mismo modelo o superior.
Panel de Cobertura-LED LCD
Durant e un period o de 12 meses d esde la fech a de compra de su
RCA, pagaremos un centro autorizad o de servicio de RCA
producto para un reemplazar la pantalla LED LCD, ya sea con pantalla nueva o reacondicionada, o a nuestra opcion, para reparar cualquier defecto del
material o mano de obra en la pantalla de su televisor. Si su televisor
1415
es irreparab le que le proporcion ara una unidad reacondiciona da del
mismo modelo o superior.-
Como Obtener Servicio
Para asistencia en Estados Unidos (E.U.A) si compro un aparato RCA en E.U.A. favor dellamar al: 1-888-977-6722 o visite: www.rca.com
El represe ntante de Servicio re visara sus o pciones para el serv icio. Para su comodidad le ofrecemos tres formas de obtener servicio de garantia.
Usted puede envia r su producto a la direccion proporciona da por el representante de servi cen tro de ser vic io auto rizad o, o pue de sol ici tar en el serv icio a domicilio (adminis trador determinara si el producto se encuentre en funcionamiento en casa o debe ser llevado de vuelta a servicio local tecnico para su reparacion).
El representante del Servicio le proporcionara las instrucciones para el
servicio preferido.
Se requiere del comprobante de compra original.
Solo se les dara servicio a Domicilio a Televisores de 37 " pulgadas de tamano y mas grandes.
Elementos no cubiertos por la garantia limitada Su
garantia limitada no cubre los siguientes temas:
- Un-instalacion, montaje y ajuste de controles del cliente e instrucciones de funcionamiento.
- Las pilas y los fusibles de repuesto al cliente.
- Danos por uso indebido, abuso, negligencia o descuido incluyendo pero no limitado a, los danos derivados de la exposicion a la humedad, la humedad o la sal.
cio, u sted puede llev ar su pr oduct o a un
- Incapacidad para recibir la senal debido a los problemas que no son causadas por el producto.
- Danos en el producto debido a las imagenes de grabadas en la pantalla.
- Productos comprados o prestar servicios fuera del pais de compra original. Ej: Comprado en Estados Unidos no puede prestar servicios en Mexico/Comprado en Mexico no puede prestar servicios en Estados Unidos.
- Productos modificados o incorporados a otros productos.
- Danos debidos a fenomenos de la naturaleza, incluyendo pero no limitado a, danos por rayos o inundaciones.
- Las llamadas de servicio que no impliquen cualquier defecto en materiales o mano de obra.
Uso Comercial Exclusion
Esta garantia limitada solo se aplica a los productos utilizados para uso personal o, y no cubre todos los productos utilizados con fines institucionales, comerciales o de alquiler.
LIMITACION DE GARANTIA
ESTA GARANTIA LIMITADA ES EL UNICO Y EXCLUSIVO DE GARANTIA APLICABLE A ESTE PRODUCTO. EN CORP EE.UU., Inc., el fabricante de este producto, rechaza cualquier otra garantia, expresada o implicada (INCLUYENDO TODAS LAS GARANTIAS IMPLICITAS DE COMERCIAL IZACION O IDONEIDAD PARA UN PROPOSITO PARTICULAR). NO informacion verbal o escrita por parte CORP DE EE.UU., Inc., sus agentes, contratistas independientes, representantes de ventas, empleados, comerciantes minoristas, mayoristas o cualquier otro tercero DEBERAN crear una garantia ni aumentar. Ampliar o modificar el alcance de esta garantia limitada.
Esta GARANTIA LIMITADA DEL UNICO Y EXCLUSIVO REMEDIO PARA EL CONSUMIDOR DE REPARACION O REEMPLAZO DEL PRODUCTO. EN CORP EE.UU., Inc. no sera responsable por danos especiales, incidentales o consecuentes resultantes DEL USO DEL PRODUCTO O DERIVADOS DE UNA VIOLACION garantia expresa o implicita de este producto.
ESTA GARANTIA LIMITADA Y RESPONSABILIDADES contenida en el se rige por las Leyes del Estado de Indiana. SALVOPROHIBIDO POR LA LEY APLICABLE, CUALQUIER GARANTIA IMPLICITA DE COMERCIALIZACION O IDONEIDAD PARA UN PROPOSITO PARTICULAR ESTARA LIMITADA A LIMITADA periodo de garantia (S) mencionado anteriormente. Esta garantia le otorga derechos legales especificos y USTED TAMBIEN PUEDE TENER OTROS DERECHOS, QUE PUEDEN VARIAR DE ESTADO.
RCA es una marca registrada de SAS bajo licencia de
ON Corp US, Inc. 10920 Via Frontera, Ste 540 San Diego, CA 92127, U.S.A.
2014 ON Corporation
RCA is a trademark of RCA Trademark Management SAS used under license to ON Corporation.
RCA es una marcade RCA Trademark Management SAS usada bajo licencia de ON Corporation.
ON Corporation
Loading...