RCA L19WD20 User Manual
LCD TELEVISION
START
Choose Your Connections
GUIDE
www.rca.com/television
HDMI
INPUT
L
P
PR
B
COMPONENT VIDEO INPUT
(1080i/720p/480p/480i)
AUDIO
Make your connection decision easier by taking a few minutes to review the jacks on your
new TV. Compare the jacks on the device you want to connect and see if the same jacks
are available on your TV. Then refer to the chart below to determine the best connection to
make.
For more information about connecting your TV to other devices, refer to Chapter 1 of the
User’s Guide. Make sure you read the safety information provided at the beginning of the
User’s Guide before you connect and operate your TV.
Quality Connects to... Cables needed (not included)Jacks
Devices with an HDMI™
output, such as HD Receivers,
Satellite Receivers, and Cable
Boxes
R
Devices with Y Pb Pr
(component) outputs, such as
Y
HD Receivers, Satellite
Receivers, Cable Boxes, DVDPVRs, and DVD Players
HDMI
Component
Video
Audio
COMPOSITE VIDEO INPUT
L
S-VIDEO
INPUT
COMPOSITE VIDEO INPUT
VIDEO
R
L
R
AUDIO
AUDIO
Devices with S-Video or Video
(composite) outputs, such as
DVD Players, VCRs, Satellite
Receivers, and Cable Boxes
Connect a Signal Source
S-Video
Audio
Video
Audio
or
Cable
(wall outlet)
OR
ANTENNA/
CABLE INPUT
(DIGITAL AND ANALOG)
TV back panel
fi g.1 fi g.2
OR
RCA and associated marks are trademarks of THOMSON S.A. used under license to TTE Corporation.
HDMI, the HDMI logo, and High-Defi nition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
Antenna
ANTENNA/
CABLE INPUT
(DIGITAL AND ANALOG)
TV back panel
Connect cable or an antenna to your TV’s ANTENNA/CABLE INPUT in
order to receive TV channels. Connect the cables as shown in fi g.1 or
fi g.2.
Note: If you have regular cable, your TV is able to receive some digital channels
because it has a capability called QAM. QAM is a tuner that enables reception of
unscrambled digital cable content. Check with your cable provider for information
about content availability in your area. Refer to Step 3 Operate Your TV for
information on viewing digital channels.
If you’re connecting a cable box or satellite receiver, use the chart above
to help determine which jacks to use for the best connection. Your cable
box or satellite receiver needs to be high defi nition if you want to receive
high defi nition programming. Check with your cable provider for more
information.
Continue to Step 2, Set Up Your TV, on the back page.
Set Up Your TV
Make sure you have already connected your TV to devices and a signal source, plugged
in the TV, and put batteries in the remote.
Now, turn on the TV and start the setup.
Setup
Signal Source Cable TV
DTV Signal Strength
Auto Channel Search Start
Manual Channel Setup
Channel Labels
Menu Language English
Screen Format Stretch
Favorite Channel Off
To Move
OK To Select
MENU To Exit
• Set the Menu Language. If English is your preferred language, skip this step and go
to Set the Signal Source. To choose another language, press the MENU button, then press
u
u
u
u
u
u
u
u
the right arrow button to enter the Setup menu. Press the down arrow to highlight Menu
Language, then press the right arrow to choose a language.
• Set the Signal Source. From the Setup menu, press the up or down arrow button to
highlight Signal Source. If you connected Cable to your ANTENNA/CABLE INPUT, the
option is chosen for you and you can press the down arrow button to highlight Auto
Channel Search. If you connected Antenna to your ANTENNA/CABLE INPUT, press the
right arrow button to choose Antenna, and then press the down arrow button to highlight
Auto Channel Search.
• Search Channels. With Auto Channel Search highlighted, press OK to begin the
channel search. The menu shows the TV is running a channel search. Your TV tunes to a
channel once the search is complete. Go to Step 3 Operate Your TV for more information.
INPUT
INPUT SUB CH
WATCH TV
CH +
MUTE
VOL
VOL- VOL +
VOL
ON•OFF
PRESETS
CC
SOUND
FORMAT
SUB CH
FORMAT
Operate Your TV
Using the Menu System
To access the menu system, press the MENU button. Use the up or down arrow buttons to
scroll up or down; left or right arrow buttons to scroll left or right, or to display submenus;
and OK to change selections. Press MENU to exit a menu and go to the previous menu.
Watching TV
Changing Channels
• If you have both analog and digital cable channels these these are put into the same
channel list. As you change channels, look at the top right corner of the screen to
see what type of channel you’re viewing. Digital channels display a D as part of the
channel, such as D Ch 29.1, while analog channels display an A as part of the channel,
such as A Ch 9.
• Depending upon the type of signals you have connected to your HDTV, you might
notice the channels change slower than you’re used to. This is perfectly normal. Digital
channels sometimes take longer to tune.
MENU
CH -
GO BACK FAV
MENU OK INFO
CLEAR
Entering Channel Numbers
To tune to a channel, enter the channel number and press OK or wait a few seconds for
the channel to tune. Digital channels can have both primary channels (like the analog
channel number) and subchannels. If 6 is the primary channel and 1 is the subchannel,
for example, the channel looks like 6.1 on screen. To tune to a digital channel with a
subchannel, such as 6.1, enter the primary channel number (6), then press the
SUB CH
button. Enter the subchannel number (1) and press OK.
Changing Screen Formats
Your TV allows you to change the format of the picture you're viewing by pressing the
FORMAT button on your remote. The format changes as you press the FORMAT button
and the format type is displayed at the top of the screen. Depending on the type of signal
you're viewing and your TV's model, a different format might not be available.
Viewing Devices Connected to Your TV
To view devices connected to your TV, press the INPUT button to display the input list.
Choose the input name that matches the input of the device you connected. Your choices
are Composite, S-Video, Component, VGA, and HDMI.
Thank you for your purchase. Before making a trip back to the retailer, please visit www.rca.com/television for more information or contact us at 1-800-336-1900 so that we
may assist you in operating the unit, replacing missing parts, and ensuring your satisfaction with the product.
TOCOM 16734970
Loading...