RCA J26C700, J32C750, J42C750 User Manual
LCD Television
User’s Guide
Commercial Television
J22C760
J32C750
J26C700
J42C750
Changing Entertainment. Again.
Important Information
2
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the
user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CC AA UU TT IIOO NN
TO PREVENT FIRE OR
SHOCK HAZARDS, DO NOT
EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
WARNING
Please fill out the product registration card (packed separately) and return
it immediately. For US customers: Your RCA Consumer Electronics product
may also be registered at http://service.rcacommercialtv.com. Registering
this product allows us to contact you if needed.
Product Registration
This reminder is provided to call the CATV system installer’s attention to
Article 820-40 of the National Electric Code (U.S.A.). The code provides
guidelines for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the building, as
close to the point of the cable entry as practical.
NOTE TO CABLE TV INSTALLER
Keep your sales receipt to obtain warranty parts and service and for proof
of purchase. Attach it here and record the serial and model numbers in
case you need them. These numbers are located on the product.
Model No.
Serial No.
Purchase Date:
Dealer/Address/Phone:
Product Information
Important Information
3
Do not attempt to modify this product in any way without written authorization from RCA.
Unauthorized modification could void the user’s authority to operate this product.
CAUTION
THESE SERVICING INSTRUCTIONS ARE FOR USE BY QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE
THE RISK OF ELECTRIC SHOCK, DO NOT PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE
OPERATING INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO.
CAUTION
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall
not be placed on the apparatus.
WARNING
When used outside of U.S., other power supply cords may be used if the cord is approved by the local regulating agency.
CAUTION
Clean the exterior of this television by removing dust with a lint-free cloth.
CAUTION: To avoid damage to the surface of the television, do not use abrasive or chemical cleaning agents.
CLEANING AND DISINFECTION
This apparatus with class I construction shall be connected to a main socket outlet with a protective earthing
connection.
Important Information
4
Main plug is the disconnecting device. The plug must remain readily operable.
DISCONNECTING DEVICE FROM MAINS
YOUR PRODUCT HAS BEEN MANUFACTURED AND TESTED WITH YOUR SAFETY IN MIND. HOWEVER,
IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARDS. TO AVOID DEFEATING
THE SAFEGUARDS THAT HAVE BEEN BUILT INTO YOUR NEW PRODUCT, PLEASE READ AND OBSERVE THE
FOLLOWING SAFETY POINTS WHEN INSTALLING AND USING YOUR NEW PRODUCT, AND SAVE THEM FOR
FUTURE REFERENCE. OBSERVING THE SIMPLE PRECAUTIONS DISCUSSED IN THIS MANUAL CAN HELP YOU
GET MANY YEARS OF ENJOYMENT AND SAFE OPERATION THAT ARE BUILT INTO YOUR NEW PRODUCT.
IMPORTANT SAFEGUARDS FOR YOU AND YOUR NEW PRODUCT
Note
-If the TV feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there
is nothing wrong with the TV.
- Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots.
However, they have no adverse effect on the TVs performance.
-Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may
produce some temporary distortion effects on the screen.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment
is operated in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
REGULATORY INFORMATION
Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
(RCA Commercial Electronics)
(TELEPHONE NO : 800-RCA-2161)
CAUTION
5
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other.
A grounding type plug has two blades and a
third grounding prong. The wide blade or the
third prong is provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with
the apparatus. When a cart is
used, use caution when moving
the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as powersupply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
15. If an outside antenna or cable system is connected to the product, be sure the antenna or cable
system is grounded so as to provide some protection against voltage surges and built-up static
charges. Section 810 of the National Electrical
Code, ANSI/NFPA No. 70-1984 (Section 54 of
Canadian Electrical Code, Part 1) provides information with respect to proper grounding of the
mast and supporting structure, grounding of the
leadin wire to an antenna-discharge unit, size of
grounding conductors, location of antenna-discharge unit, connection to grounding electrodes,
and requirements for the grounding electrode.
See following example.
Note
- The lamp in this product contains mercury. Please dispose of in accordance with local, state, or federal
laws.
Table of Contents
6
Important Information ..............................................2
IMPORTANT SAFETY INSTRUCTIONS ........................5
Chapter 1: Connections and Setup
Things to Consider Before You Connect ..................7
Protect Against Power Surges ........................7
Protect Devices from Overheating..................7
Position Cables Properly to Avoid Audio
Interference ......................................................7
Use Indirect Light ............................................7
Remote Control ................................................7
Check Supplied Parts........................................7
Controls And Connectors ..........................................8
Front Panel - J22C760 ......................................8
Rear Panel - J22C760........................................9
Front Panel - J26C700 ....................................10
Rear Panel - J26C700......................................11
Front Panel - J32C750 ....................................12
Rear Panel - J32C750......................................13
Front Panel - J42C750 ....................................14
Rear Panel - J42C750......................................15
Connections ..............................................................16
Wall mount Installation ................................16
Desktop Pedestal Installation ........................16
Parts for stand assembly ................................17
Stand Installation ..........................................19
Antenna Connection......................................22
VCR Connection..............................................23
DVD Connection ............................................25
HDSTB Connection ........................................26
External A/V Source........................................29
Digital Audio Out ..........................................30
PC Connection ................................................31
Resolution ......................................................33
USB in Setup ..................................................33
Chapter 2: Using the Remote Control
Basic(User) Remote ........................................34
Master(Installer) Remote ..............................35
Put Batteries in the Remote ..........................35
Chapter 3: Using USB Clone Tool
USB Cloner Out-looking ................................36
Errors Table ....................................................36
Learning Connection ....................................37
Teaching Connection......................................39
Chapter 4: Basic Operation
Plug in the TV ................................................40
Turn on the TV................................................40
Channel Scan ..................................................40
Channel Selection ..........................................40
Volume Adjustment ......................................40
Sound Mute ....................................................40
Source Selection ............................................41
Language Selection........................................41
Chapter 5: Commercial Interface Menus
Commercial Interface Menus ..................................42
Chapter 6: Using the TV's Features
On Screen Menus ....................................................45
Setting up the TV Channel ....................................46
Auto Scan........................................................46
Add / Delete a Channel..................................47
Picture Controls ........................................................48
Adjusting The Picture Controls ....................48
Manual Picture Controls ................................49
Gamma............................................................50
Color Temperature ........................................51
Reset Picture Mode ........................................52
Advanced Video ......................................................53
Dynamic Noise Reduction ..............................53
CTI (Color Transient Intensity) ......................54
Flesh Tone ......................................................54
Adaptive Luma Control..................................55
Blue Mute ......................................................55
Back Light ......................................................56
Screen Mode ..................................................57
Sound Controls ........................................................58
Adjusting The Sound Controls ......................58
Manual Sound Controls ................................59
Sound Surround ............................................60
Equalizer ........................................................60
Digital Output ................................................61
Stereo/SAP Broadcast Setup ..........................62
Audio Language ............................................62
Time Setting ............................................................63
Time Zone Settings ........................................63
Auto Time Settings ........................................64
Manual Time Settings ....................................65
Auto On /Off Time Settings ..........................66
Sleep Timer ....................................................67
Captions ....................................................................68
Closed Caption - Analog................................68
Closed Caption - Digital ................................69
Digital Closed Caption Options ....................70
Reset ........................................................................71
Reset Default ..................................................71
Parental Control ......................................................72
Entering your password ................................72
Set Password ..................................................72
Ratings - Enable / Disable ..............................73
TV Ratings for USA ........................................74
Movie Ratings ................................................76
English TV Ratings for Canada ......................77
French TV Ratings for Canada ......................78
Downloadable Rating ....................................79
Block Unrated ................................................80
Clean All..........................................................80
Setting the PC Mode................................................81
Automatic Screen Adjustment ......................81
Manual Screen Adjustment ..........................82
USB Functions ..........................................................83
Picture Function ............................................83
Music Function ..............................................84
Specification ............................................................85
Chapter 7: Other Information
Troubleshooting ......................................................89
Limited Warranty ....................................................90
Care and Cleaning ....................................................91
CHILD SAFETY ..........................................................92
Graphics contained within this publication are for representation only.
Chapter 1 7
Chapter 1: Connections and Setup
Things to Consider Before You Connect
• Connect all devices before you plug any of their power cords into the wall outlet or power strip. NEVER
plug your TV into an outlet that is controlled by a wall switch.
•Turn off the TV and/or device(s) before you connect or disconnect any cables.
• Make sure all antennas and cables are properly grounded. Refer to the Important Safety Instructions at
the beginning of the User's Guide.
Protect Against Power Surges
• Don’t block ventilation holes on any of the devices. Arrange the devices so that air can circulate freely.
• Don’t stack devices.
• If you place devices in a stand, make sure you allow adequate ventilation.
• If you connect an audio receiver or amplifier, place it on the top shelf so the heated air from it won’t flow
around other devices.
Protect Devices from Overheating
• Insert each cable firmly into the designated jack.
• If you place devices above the TV, route all cables down the side of the back of the TV instead of straight
down the middle.
• If your antenna uses 300-ohm twin lead cables, do not coil the cables. Also, keep the twin lead cables
away from audio/video cables.
Position Cables Properly to Avoid Audio Interference
Don’t place the TV where sunlight or room lighting will be directed toward the screen. Use soft or indirect
lighting.
Use Indirect Light
You will need a master remote or USB Cloner to set up the TV. Contact your RCA Commercial Distributor to
purchase these.
Remote Control
Check that the following parts were packed with your product.
Check Supplied Parts
Power Cord Owner’s Manual
Note
- If you need to replace your remote, call 800-RCA-2161. A shipping and handling fee, and the appropriate
sales tax, will be charged upon ordering. Have your Visa, MasterCard, or Discover Card ready.
- Stand Base, Stand Body images shown may differ from your TV.
"User must use shielded signal interface cables with ferrite cores to maintain standard compliance for the product"
Stand Base
(Optional)
Stand Body
(Optional)
Chapter 1: Connections and Setup
Chapter 18
Front Panel - J22C760
1. VOL- / VOL+
Adjusts sound level and menu settings.
2. CH / CH
Select a channel.
3. SOURCE
Selects the TV, AV1, AV 2, YPbPr, VGA, HDMI or USB mode.
4. MENU
Display on screen menus.
5. POWER
Switches the set on or off.
6. Power Indicator
Illuminates to bright blue when the TV is on. When the TV is powered off, this LED is also off.
Remote control sensor
Accepts the IR signal of remote controller.
6
1 2 3 4 5
VOL
SOURCE
MENU
CH
Note
- Image shown may differ from your TV.
Chapter 1
Chapter 1: Connections and Setup
9
Rear Panel - J22C760
10
11
VIDEO
L-AUDIO-R
AV2
USB IN
HDMI/DVIINRGB IN
(PC)
AUDIO IN
(RGB/DVI)
DIGITAL AUDIO
OUT(COAXIAL)
ANTENNA/
CABLE IN
3 7 8 92
VIDEO
YPbPr
LR
COMPONENT IN
AUDIO
4 651
AC IN
SERVICE
AV1
AUDIO
L
VIDEO
R
Note
- Image shown may differ from your TV.
1. AC IN
This TV operates on AC power.
2. HDMI/DVI IN
Connect to the HDMI jack on devices with an
HDMI output.
This input can also be used as a DVI connection
with separate analog audio inputs.
3. RGB IN (PC)
Connect to the video output jack on your PC.
4. COMPONENT IN (YPbPr)
Video/Audio inputs for Component.
5. SERVICE
Used by clone device to learn settings in TV.
6. AV1
Connects to your Audio/Video devices using a
composite (Yellow/Red/White) cable.
7. AUDIO IN (RGB/DVI)
Connect to the audio output jack on your PC.
8. ANTENNA/CABLE IN
Connect to your antenna or cable box for TV signal.
9. DIGITAL AUDIO OUT(COAXIAL)
Connect digital audio to various types of equipment.
10.USB IN
USB device interface.
11.AV2
Connects to your Audio/Video devices using a
composite (Yellow/Red/White) cable.
Chapter 1: Connections and Setup
Chapter 110
Front Panel - J26C700
SOURCE
MENU
VOL
CH
6
1 2 3 4 5
SOURCE
MENU
VOL
CH
Note
- Image shown may differ from your TV.
1. VOL- / VOL+
Adjusts sound level and menu settings.
2. CH / CH
Select a channel.
3. SOURCE
Selects the TV, AV1, AV 2, YPbPr, VGA, HDMI or USB mode.
4. MENU
Display on screen menus.
5. POWER
Switches the set on or off.
6. Power Indicator
Illuminates to bright blue when the TV is on. When the TV is powered off, this LED is also off.
Remote control sensor
Accepts the IR signal of remote controller.
Chapter 1
Chapter 1: Connections and Setup
11
Rear Panel - J26C700
R - AUDIO - L
AV2
VIDEO
USB IN
10
11
HDMI/DVIINRGB IN
(PC)
AUDIO IN
(RGB/DVI)
DIGITAL AUDIO
OUT(COAXIAL)
ANTENNA/
CABLE IN
3 6 7 8 92
VIDEO
YPbPr
LR
COMPONENT IN
AUDIO
AV1
AUDIO
L
VIDEO
R
4 51
AC IN
SERVICE
Note
- Image shown may differ from your TV.
1. AC IN
This TV operates on AC power.
2. HDMI/DVI IN
Connect to the HDMI jack on devices with an
HDMI output.
This input can also be used as a DVI connection
with separate analog audio inputs.
3. RGB IN (PC)
Connect to the video output jack on your PC.
4. COMPONENT IN (YPbPr)
Video/Audio inputs for Component.
5. AV1
Connects to your Audio/Video devices using a
composite (Yellow/Red/White) cable.
6. AUDIO IN (RGB/DVI)
Connect to the audio output jack on your PC.
7. ANTENNA/CABLE IN
Connect to your antenna or cable box for TV signal.
8. DIGITAL AUDIO OUT(COAXIAL)
Connect digital audio to various types of equipment.
9. SERVICE
Used by clone device to learn settings in TV.
10.USB IN
USB device interface.
11.AV2
Connects to your Audio/Video devices using a
composite (Yellow/Red/White) cable.
Chapter 1: Connections and Setup
Chapter 112
Front Panel - J32C750
VOL SOURCE MENUCH
12345
VOL SOURCEMENUCH
6
Note
- Image shown may differ from your TV.
1. VOL- / VOL+
Adjusts sound level and menu settings.
2. CH / CH
Select a channel.
3. SOURCE
Selects the TV, AV1, AV 2, YPbPr, VGA, HDMI or USB mode.
4. MENU
Display on screen menus.
5. POWER
Switches the set on or off.
6. Power Indicator
Illuminates to bright blue when the TV is on. When the TV is powered off, this LED is also off.
Remote control sensor
Accepts the IR signal of remote controller.
Chapter 1
Chapter 1: Connections and Setup
13
Rear Panel - J32C750
1. AC IN
This TV operates on AC power.
2. HDMI/DVI IN
Connect to the HDMI jack on devices with an
HDMI output.
This input can also be used as a DVI connection
with separate analog audio inputs.
3. RGB IN (PC)
Connect to the video output jack on your PC.
4. COMPONENT IN (YPbPr)
Video/Audio inputs for Component.
5. AV1
Connects to your Audio/Video devices using a
composite (Yellow/Red/White) cable.
6. AUDIO IN (RGB/DVI)
Connect to the audio output jack on your PC.
7. ANTENNA/CABLE IN
Connect to your antenna or cable box for TV signal.
8. DIGITAL AUDIO OUT(COAXIAL)
Connect digital audio to various types of equipment.
9. SERVICE
Used by clone device to learn settings in TV.
10.USB IN
USB device interface.
11.AV2
Connects to your Audio/Video devices using a
composite (Yellow/Red/White) cable.
HDMI/DVIINRGB IN
(PC)
AUDIO IN
(RGB/DVI)
DIGITAL AUDIO
OUT(COAXIAL)
ANTENNA/
CABLE IN
3 6 7 8 92
VIDEO
YPbPr
LR
COMPONENT IN
AUDIO
AV IN
AUDIO
L
VIDEO
R
4 51
AC IN
SERVICE
10
11
USB IN
AV2
VIDEO L - AUDIO - R
Note
- Image shown may differ from your TV.
Chapter 1: Connections and Setup
Chapter 114
Front Panel - J42C750
VOL SOURCE MENUCH
12345
VOL SOURCE MENUCH
6
Note
- Image shown may differ from your TV.
1. VOL- / VOL+
Adjusts sound level and menu settings.
2. CH / CH
Select a channel.
3. SOURCE
Selects the TV, AV1, AV 2, YPbPr, VGA, HDMI or USB mode.
4. MENU
Display on screen menus.
5. POWER
Switches the set on or off.
6. Power Indicator
Illuminates to bright blue when the TV is on. When the TV is powered off, this LED is also off.
Remote control sensor
Accepts the IR signal of remote controller.
Chapter 1
Chapter 1: Connections and Setup
15
Rear Panel - J42C750
1
HDMI/DVIINRGB IN
(PC)
AUDIO IN
(RGB/DVI)
DIGITAL AUDIO
OUT(COAXIAL)
ANTENNA/
CABLE IN
3 6 7 82
VIDEO
YPbPr
LR
COMPONENT IN
AUDIO
AV1
AUDIO
L
VIDEO
R
4 5
9
SERVICE
AV2
VIDEO L - AUDIO - R
USB IN
11
10
Note
- Image shown may differ from your TV.
1. AC IN
This TV operates on AC power.
2. HDMI/DVI IN
Connect to the HDMI jack on devices with an
HDMI output.
This input can also be used as a DVI connection
with separate analog audio inputs.
3. RGB IN (PC)
Connect to the video output jack on your PC.
4. COMPONENT IN (YPbPr)
Video/Audio inputs for Component.
5. AV1
Connects to your Audio/Video devices using a
composite (Yellow/Red/White) cable.
6. AUDIO IN (RGB/DVI)
Connect to the audio output jack on your PC.
7. ANTENNA/CABLE IN
Connect to your antenna or cable box for TV signal.
8. DIGITAL AUDIO OUT(COAXIAL)
Connect digital audio to various types of equipment.
9. SERVICE
Used by clone device to learn settings in TV.
10.USB IN
USB device interface.
11.AV2
Connects to your Audio/Video devices using a
composite (Yellow/Red/White) cable.
Chapter 1: Connections and Setup
Chapter 116
Wall mount Installation
4 inches
4 inches
4 inches
4 inches
4 inches
The set can be installed on a wall as shown above.
For proper ventilation, allow a clearance of 4 inches on all four sides from the wall.
Detailed instructions are available from your dealer, refer to the optional Wall Mounting Bracket Installation
and Setup Guide. (Wall Mount Sold Separately)
Note
- This Television should be installed by a Qualified Service Personnel.
Desktop Pedestal Installation
4 inches
4 inches
4 inches
4 inches
The set can be mounted on a desk as shown above.
For proper ventilation, allow a clearance of 4 inches on each side from the wall.
Detailed instructions are available from your dealer.
Note
- Image shown may differ from your TV.
Chapter 1
Chapter 1: Connections and Setup
17
Parts for stand assembly - 22 inch
TV Stand Body
Stand Base 4 - A type bolts
4 - B type bolts
Parts for stand assembly - 26 inch
TV Stand Body
Stand Base 4 - A type bolts
4 - B type bolts
Chapter 1: Connections and Setup
Parts for stand assembly - 32/42 inches
TV Stand Body
Stand Base 4 - A type bolts
4 - B type bolts
Chapter 118
Chapter 1: Connections and Setup
1. Carefully place the product screen
side down on a cushioned surface
that will protect the product and
screen from damage.
2. Using the screws provided assemble
the stand body with the stand base as
shown.
4. Install the 4 bolts securely, in the back
of the product in the holes provided.
3. Assemble the product stand with the
product as shown.
Stand
body
Stand
base
Stand Installation - 22 inch
Note
- Image shown may differ from your TV.
Chapter 1 19
Chapter 1: Connections and Setup
20 Chapter 1
Note
- Image shown may differ from your TV.
1. Carefully place the product screen
side down on a cushioned surface
that will protect the product and
screen from damage.
2. Using the screws provided assemble
the stand body with the stand base as
shown.
4. Install the 4 bolts securely, in the back
of the product in the holes provided.
3. Assemble the product stand with the
product as shown.
Stand
body
Stand
base
Stand Installation - 26 inch
Chapter 1: Connections and Setup
21Chapter 1
1. Carefully place the product screen
side down on a cushioned surface
that will protect the product and
screen from damage.
2. Using the screws provided assemble
the stand body with the stand base as
shown.
3. Remove the included stand cover
from the product.
5. Install the 4 bolts securely, in the back
of the product in the holes provided.
4. Assemble the product stand with the
product as shown.
Stand
body
Stand
base
Stand Installation - 32/42 inches
Note
- Image shown may differ from your TV.
- When mounting TV on the wall, install the included Stand Cover over the hole for the stand. Press the
Stand Cover into the TV until you hear it click.
Chapter 1: Connections and Setup
22 Chapter 1
AUDIO IN
(RGB/DVI)
DIGITAL AUDIO
OUT(COAXIAL)
ANTENNA/
CABLE IN
AV1
AUDIO
L
VIDEO
R
Rear panel of the set
Antenna Connection
Note
-To improve the picture quality in a poor signal
area, please purchase a signal amplifier and
install properly.
- If the antenna is not installed properly, contact
your dealer for assistance.
AUDIO IN
(RGB/DVI)
DIGITAL AUDIO
OUT(COAXIAL)
ANTENNA/
CABLE IN
AV1
AUDIO
L
VIDEO
R
Rear panel of the set
Multi-family Dwellings/ Apartments
(Connect to wall antenna socket)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
Wall Antenna Socket
Outdoor Antenna
RF Coaxial Wire (75 ohm)
Turn clockwise to tighten.
Be careful not to bend the bronze wire when
connecting to an antenna port.
* Separately purchase a RF Coaxial Wire(75 ohm)
Signal
Amplifier
VHF UHF
VHF
UHF
23
Chapter 1: Connections and Setup
Chapter 1
VCR Connection
AA When connecting with an antenna
AUDIO IN
(RGB/DVI)
DIGITAL AUDIO
OUT(COAXIAL)
ANTENNA/
CABLE IN
AV1
AUDIO
L
VIDEO
R
ANT IN
ANT OUT S-VIDEO
IN
OUT
(R) AUDIO (L) VIDEO
1. Connect the Antenna out socket of the VCR to
the Antenna input socket on the TV.
2. Power up the VCR and Television.
3. Tune the TV to the channel output by the VCR.
(typically ch.3 or 4.)
4. Refer to the VCR manual for operating instructions.
VCR
Rear panel of the set
AA When connecting with an RCA cable - 22/26 inches
R - AUDIO - L
AV2
VIDEO
USB IN
AUDIO IN
(RGB/DVI)
ANTENNA/
CABLE IN
AV1
AUDIO
L
VIDEO
R
ANT IN
ANT OUT S-VIDEO
IN
OUT
(L) AUDIO (R)VIDEO
OUTPUT
SWITCH
1. Connect the AUDIO/VIDEO jacks between TV and
VCR. Match the jack colors (Video = yellow, Audio
Left = white, and Audio Right = red)
2. Insert a video tape into the VCR and press PLAY
on the VCR.
3. Select the AV1 or AV2 input source using the
INPUT button on the remote control.
4. Refer to the VCR manual for operating instructions.
VCR
Rear panel of the set
Side panel of the set
- To avoid picture noise (interference), leave an adequate distance between the TV and the VCR.
Chapter 1: Connections and Setup
24
AA When connecting with an RCA cable - 42 inch
AV2
VIDEO L - AUDIO - R
USB IN
AUDIO IN
(RGB/DVI)
ANTENNA/
CABLE IN
AV1
AUDIO
L
VIDEO
R
ANT IN
ANT OUT S-VIDEO
IN
OUT
(L) AUDIO (R)VIDEO
OUTPUT
SWITCH
1. Connect the AUDIO/VIDEO jacks between TV and
VCR. Match the jack colors (Video = yellow, Audio
Left = white, and Audio Right = red)
2. Insert a video tape into the VCR and press PLAY
on the VCR.
3. Select the AV1 or AV2 input source using the
INPUT button on the remote control.
4. Refer to the VCR manual for operating instructions.
VCR
Rear panel of the set
Side panel of the set
Chapter 1
AA When connecting with an RCA cable - 32 inch
USB IN
AV2
VIDEO L - AUDIO - R
AUDIO IN
(RGB/DVI)
ANTENNA/
CABLE IN
AV1
AUDIO
L
VIDEO
R
ANT IN
ANT OUT S-VIDEO
IN
OUT
(L) AUDIO (R)VIDEO
OUTPUT
SWITCH
1. Connect the AUDIO/VIDEO jacks between TV and
VCR. Match the jack colors (Video = yellow, Audio
Left = white, and Audio Right = red)
2. Insert a video tape into the VCR and press PLAY
on the VCR.
3. Select the AV1 or AV2 input source using the
INPUT button on the remote control.
4. Refer to the VCR manual for operating instructions.
VCR
Rear panel of the set
Side panel of the set
Chapter 1: Connections and Setup
25
AA When connecting with a Component cable
HDMI/DVIINRGB IN
(PC)
VIDEO
YPbPr
LR
COMPONENT IN
AUDIO
(L) AUDIO (R)
Y
Pb Pr
1. Connect the video outputs (Y, PB, PR) of the DVD
to the COMPONENT VIDEO(Y, Pb, Pr) jacks on
the set.
2. Connect the audio outputs of the DVD to the
COMPONENT AUDIO L, R jacks on the set.
3. Turn on the DVD player, insert a DVD.
4. Select YPbPr source using the INPUT button on
the remote control.
5. Refer to the DVD player's manual for operating
instructions.
DVD
Rear panel of the
set
DVD Connection
AA When connecting with a HDMI cable
HDMI/DVIINRGB IN
(PC)
VIDEO
YPbPr
LR
COMPONENT IN
AUDIO
HDMI-DVD OUTPUT
1. Connect the HDMI output of the DVD to the
HDMI/DVI IN jack on the set.
2. Select HDMI input source using the INPUT button
on the remote control.
3. Refer to the DVD player's manual for operating
instructions.
DVD
Rear panel of the set
Chapter 1
Chapter 1: Connections and Setup
26
- This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box.
However, if you do receive Digital signals from a digital set-top box or other digital external device, refer
to the figure as shown below.
HDSTB Connection
AA When connecting with a D-Sub 15 pin cable - 26/32/42 inches
RGB IN
(PC)
AUDIO IN
(RGB/DVI)
VIDEO
YPbPr
LR
COMPONENT IN
AUDIO
AV1
AUDIO
L
VIDEO
R
(R) AUDIO (L) RGB-DTV OUTPUT
1. Connect the RGB output of the digital set-top
box to the RGB IN (PC) jack on the set.
2. Connect the audio outputs of the set-top box to
the AUDIO IN (RGB/DVI) jack on the set.
3. Turn on the digital set-top box.
4. Select VGA input source using the INPUT button
on the remote control.
5. Refer to the digital set-top box manual for operating instructions.
Digital Set-top Box
Rear panel of the set
AA When connecting with a D-Sub 15 pin cable - 22 inch
RGB IN
(PC)
VIDEO
YPbPr
LR
COMPONENT IN
AUDIO
AUDIO IN
(RGB/DVI)
SERVICE
AV1
AUDIO
L
VIDEO
R
(R) AUDIO (L) RGB-DTV OUTPUT
1. Connect the RGB output of the digital set-top
box to the RGB IN (PC) jack on the set.
2. Connect the audio outputs of the set-top box to
the AUDIO IN (RGB/DVI) jack on the set.
3. Turn on the digital set-top box.
4. Select VGA input source using the INPUT button
on the remote control.
5. Refer to the digital set-top box manual for operating instructions.
Digital Set-top Box
Rear panel of the set
Chapter 1
27
AA When connecting with a HDMI to DVI cable - 26/32/42 inches
HDMI/DVIINRGB IN
(PC)
AUDIO IN
(RGB/DVI)
VIDEO
YPbPr
LR
COMPONENT IN
AUDIO
AV1
AUDIO
L
VIDEO
R
DVI-DTV OUTPUT
(R) AUDIO (L)
1. Connect the DVI output of the digital set-top box
to the HDMI/DVI IN jack on the set.
2. Connect the audio outputs of the set-top box to
the AUDIO IN (RGB/DVI) jack on the set.
3. Turn on the digital set-top box.
4. Select HDMI input source using the INPUT button
on the remote control.
5. Refer to the digital set-top box manual for operating instructions.
Digital Set-top Box
Rear panel of the set
AA When connecting with a HDMI to DVI cable - 22 inch
HDMI/DVI
IN
RGB IN
(PC)
VIDEO
YPbPr
LR
COMPONENT IN
AUDIO
AUDIO IN
(RGB/DVI)
SERVICE
AV1
AUDIO
L
VIDEO
R
DVI-DTV OUTPUT
(R) AUDIO (L)
1. Connect the DVI output of the digital set-top box
to the HDMI/DVI IN jack on the set.
2. Connect the audio outputs of the set-top box to
the AUDIO IN (RGB/DVI) jack on the set.
3. Turn on the digital set-top box.
4. Select HDMI input source using the INPUT button
on the remote control.
5. Refer to the digital set-top box manual for operating instructions.
Digital Set-top Box
Rear panel of the set
Chapter 1
Chapter 1: Connections and Setup
28
AA When connecting with a Component cable
HDMI/DVIINRGB IN
(PC)
VIDEO
YPbPr
LR
COMPONENT IN
AUDIO
(L) AUDIO (R)
Y
Pb Pr
1. Connect the video outputs (Y, PB, PR) of the digital set-top box to the COMPONENT VIDEO(Y,
Pb, Pr) jacks on the set.
2. Connect the audio outputs of the digital set-top
box to the COMPONENT AUDIO L, R jacks on the
set.
3. Turn on the digital set-top box.
4. Select YPbPr source using the INPUT button on
the remote control.
5. Refer to the digital set-top box manual for operating instructions.
Digital Set-top Box
Rear panel of the set
AA When connecting with a HDMI cable
HDMI/DVIINRGB IN
(PC)
VIDEO
YPbPr
LR
COMPONENT IN
AUDIO
HDMI-DTV OUTPUT
1. Connect the HDMI output of the digital set-top
box to the HDMI/DVI IN jack on the set.
2. Turn on the digital set-top box.
3. Select HDMI input source using the INPUT button
on the remote control.
4. Refer to the digital set-top box manual for operating instructions.
Digital Set-top Box
Rear panel of the set
Chapter 1
29
Chapter 1: Connections and Setup
Chapter 1
R - AUDIO - L
AV2
VIDEO
USB IN
AUDIO IN
(RGB/DVI)
ANTENNA/
CABLE IN
AV1
AUDIO
L
VIDEO
R
L-AUDIO-RVIDEO
OUT
1. Connect the AUDIO/VIDEO jacks between TV and
external equipment. Match the jack colors (Video
= yellow, Audio Left = white, and Audio Right =
red)
2. Select the AV1 or AV2 input source using the
INPUT button on the remote control.
3. Operate the corresponding external equipment.
4. Refer to the external equipment manual for operating instructions.
Camcorder Video game set
Rear panel of the set
External A/V Source - 22/26 inches
Side panel of the set
USB IN
AV2
VIDEO L - AUDIO - R
AUDIO IN
(RGB/DVI)
ANTENNA/
CABLE IN
AV1
AUDIO
L
VIDEO
R
L-AUDIO-RVIDEO
OUT
1. Connect the AUDIO/VIDEO jacks between TV and
external equipment. Match the jack colors (Video
= yellow, Audio Left = white, and Audio Right =
red)
2. Select the AV1 or AV2 input source using the
INPUT button on the remote control.
3. Operate the corresponding external equipment.
4. Refer to the external equipment manual for operating instructions.
Camcorder Video game set
Rear panel of the set
External A/V Source - 32 inch
Side panel of the set
Loading...