RCA D770 User Manual

D770

DVD PLAYER

CABLE BOX

DBS SYSTEM

AUDIO SYSTEM

VCR

UNIVERSAL

REMOTE

• Consolidates up to 5

component remotes!

• Long range

RF transmitter

for select

satellite systems

• Comfortable

grip & keypad

layout promotes

ease of use

Compatible with most brands of components.

*See compatibility on back

Thank you for purchasing this RCA universal remote control. This product is designed to operate a wide variety of video and audio components. Please retain this guide for future reference.

This universal remote control is already programmed for most RCA, GE, and PROSCAN branded TVs, VCRs, DBS systems (manufactured before 2003), and DVD players.

Note: For users of RCA and PROSCAN DBS products: Older DBS models require

that the INFO or MENU key on this remote be used to make program selections. Use the OK key for making program selections on newer RCA and PROSCAN DBS models. If your satellite receiver was purchased after 2003, programming the remote is required.

Table of Contents

Your universal remote requires 2 new AAalkaline batteries (sold separately).

To install the batteries:

1. On the back of the remote, push down on the cover and slide it off.

2. Insert the batteries, matching the batteries to the (+) and (-) marks inside the battery case.

3. Slide the battery cover back into place.

Note: Reprogramming may be required after batteries are replaced.

Battery Installation

Battery Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Key Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–5

Programming The Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Programming For TV—Direct Entry Method . . . . . . . . . . . . . . . . . . . . . . . 6

Programming For VCR—Direct Entry Method . . . . . . . . . . . . . . . . . . . . . . 6

Programming For DVD—Direct Entry Method . . . . . . . . . . . . . . . . . . . . . 6

Programming The AUX1 And AUX2 Keys . . . . . . . . . . . . . . . . . . . . . . . . . 7

Using Automatic Code Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Using The Remote To Control A Component . . . . . . . . . . . . . . . . . . . . . . . 8

Changing The RF Remote Control Code . . . . . . . . . . . . . . . . . . . . . . . . . 8–9

Menu Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10–11

Questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Key Description

ANTENNA In TV Mode, lets you switch the source of the video signal from satellite signals to an off-air antenna or cable signal when using the OUT TO TV jack. In VCR Mode, it functions as a TV/VCR input key.

ARR

OWS Use the navigation arrows

to move the on-screen highlight up, down, left, or right. Using the arrows to highlight a menu item is also called “pointing.”

CH +

(UP)/ - (DOWN) Use to scan up and

down through the channels in the current channel list. If you are in the program guide or menu system, use the CH +/- keys to page up and down a screen at a time. You can also use the CH +/- keys on the top of the digital satellite receiver to change the channel.

CLEAR

Removes the on-screen displays

and returns you to normal viewing.

COMPONENT KEYS

When programmed, these keys are used to put the remote in a specific mode so that it can control that component.

AUX1 and AUX2 Act as “wildcard” keys. They can be programmed to control another TV, VCR, DVD, satellite receiver, cable box, or an audio component. Follow the direct entry programming instructions on page 7 to program these keys.

Note: The AUX1 key is pre-programmed with

codes to control a Dish Network digital satellite receiver.

DVD Puts the remote in DVD Mode.

SAT Puts the remote in SAT Mode. This key is pre-programmed

to control an RCA DIRECTV®digital satellite receiver manufactured before 2004.

Note: This key cannot be reprogrammed. If the SAT key doesn’t control your receiver, use the AUX1 key to program the remote to control your satellite receiver if it was purchased after 2003.

TV Puts the remote in TV Mode.

VCR Puts the remote in VCR Mode.

Digit K

eys (0-9)

Use the digit keys to tune directly to a three-digit

satellite channel or non-satellite channel. If a satellite channel number is less than four-digits long, you must press OK after entering the channel number. If you are in the menu system, use the digits to highlight and select items. Use 0 to return to the previous menu screen.

FETCH

Either brings up the Fetch menu or tells the receiver to take the

action you programmed it to take.

GO BACK Moves you back and forth between the last two selected channels. In the menu system, returns you to the previous screen.

GUIDE

Brings up the program guide. Subsequent presses of the GUIDE

key switch between the Detail and Grid guide formats.

INFO Brings up the on-screen channel banner, password challenge, or purchase offer screen. Press again to get program details. In the program guides, press INFO to get information about the highlighted program or channel.

LED indicator light This light turns red at each valid key press. When programming the remote control, it flashes or turns on or off to indicate programming status.

Displays the Main menu. If you are already in the menu system,

press OK or MENU to select a highlighted choice. When you are using the remote control to operate an RCA, GE, or PROSCAN VCR (the remote is in VCR mode), the MENU key functions as a PROGRAM key.

MUTE

Reduces the TV’s volume to its minimum level. Press again to

restore the volume.

Selects a highlighted choice if you are in the menu system. After entering a one-, two-, or three-digit satellite channel number, press to tune to the channel. If you are entering a number other than a satellite channel number (for instance, to tune your VCR to a channel), you do not need to press this key. Press the OK key when the Interactive TV icon (¿)

appears on the screen. Pressing OK will display more

information and offer the chance to interact in some way with what is displayed on screen.

ON•OFF Turns the component you are controlling on or off. When pressed twice within two seconds, all components that are on will be turned off. This feature only works with most RCA, GE, and PROSCAN products. You can also use the ON•OFF key on the top (front panel) of the digital satellite receiver to turn off the receiver.

SKIP This key is not used by the digital satellite receiver. It is functional only with RCA, GE, PROSCAN TVs and VCRs.

ransport Keys (REVERSE, PLAY, FORWARD, RECORD, STOP,

PAUSE) When programmed, these keys are used to control an auxiliary

component, such as a VCR or DVD player. Note: If your VCR is connected, the RECORD key can be used to schedule a timed recording when using the Program Guide or to begin recording while watching a program (in VCR Mode).

OL + (UP)/ - (DOWN) Adjusts the audio volume of your TV.

WHO•INPUT

Press the WHO key one or more times to scroll through

the user profiles. When you are using the remote control to operate an RCA, GE, or PROSCAN TV (in TV Mode), press the WHO•INPUT key one or more times to scroll through the available video input sources.

Key Description (Continued)

Programming The Remote Control

The remote is already programmed to control most RCA, GE, and PROSCAN branded components; it may need to be programmed to control other manufacturers’ brands.

esting The Remote Control To determine whether the universal

remote control needs to be programmed, turn on a component, such as a VCR, point the remote at the VCR, and press the VCR key. Then press ON•OFF or CH + or CH - to see if the VCR responds to the remote commands. If it does not respond, the remote needs to be programmed.

There are two ways to program the remote control: Automatic Code Search or Direct Entry.

+ 7 hidden pages