USER’S
GUIDE
COLOR TV
It is important to read this manual before
operating this unit for the first time.
TOCOM 15123210
C33682, C37683,
M33672 & M37673
i
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates
“dangerous voltage” inside
the product that presents a
risk of electric shock or
personal injury.
This symbol indicates
important instructions
accompanying the
product.
Important Information
WARNING
To reduce the risk of fire or
shock hazard, do not expose
this TV to rain or moisture.
To prevent electric shock, match wide blade of plug to wide
slot, fully insert.
Cautions
Note To Cable TV Installer
This reminder is provided to call your attention to Article 820-40 of the
United States National Electrical Code, which provides guidelines for
proper grounding and, in particular, specifies that the cable ground shall
be connected to the grounding system of the building as close to the point
of cable entry as practical.
Do not defeat the safety feature of the plug. The wide blade fits into the wall socket
only one way. If you need and extension cord, make sure it matches the plug of the
TV.
FOR MODELS C33682 & C37683:
OPERATE TV ONLY ON 100-260 VOLTS 60 HZ AC power.
FOR MODELS M33672 & M37673:
OPERATE TV ONLY ON 120 VOLTS 60 HZ AC power.
Insure that the main electrical supply in your house complies with
the identification sticker located at the back of your appliance.
FCC regulationsons state that unauthorized changes or modifications to this equipment
may void the user’s authority to operate it.
1
Table of Contents
Important Information Warning _____________________________________________________________________ i
Quick Guide to Your TV Startup ____________________________________________________________________ 2-3
Hook up, Plug in TV, Put Batteries in the Remote,
Turn on the TV, Place Channels into Memory, Set the Time
Basic Tour of the Remote ____________________________________________ 4
Basic Button Layout and Functions
Menu Basics ______________________________________________________________ 5
Colors, Menu Buttons, Moving through the Menus
Using Your TV and Remote With Remote Buttons ______________________________________________ 6-7
With VCRs
____________________________________________________________ 8-11
With a Cable Box _________________________________________________ 12-13
With a Laserdisc Player ____________________________________________ 14
With Audio Equipment
____________________________________________ 15
Adjusting Your TV Overall Picture _________________________________________________________ 16
Picture Settings
________________________________________________________ 17
Color, Tint, Brightness, Sharpness, Autocolor, Picture Reset
Sound Settings ____________________________________________________ 18-19
Stereo, Expanded Stereo, SAP, Tone, Speakers
Using Advanced Features Placing Channels in Memory/Autoprogram ____________ 20
Naming the Channels
______________________________________________ 21
Setting the Sleep Timer
_____________________________________________ 22
Setting the Alarm Clock
___________________________________________ 23
Watching Picture-in-Picture
_________________________________ 24-25
Selecting a Language ___________________________ 26
Watching Closed Captioning
____________________________________ 26
Setting Your TV for Antenna or Cable
_______________________ 27
References Front Panel Buttons __________________________________________________ 28
Displays on the Screen
_____________________________________________ 29
Trouble Checks
____________________________________________________ 30-31
Index
__________________________________________________________________ 32-33
Cleaning
____________________________________________________ Back Cover
2
1. Hook up your TV
Details are in the Connections
Guide.
Hook up any antennas, cables or
other equipment to your TV before
you follow the steps below.
The steps below will get your TV connected and ready for watching.
For more details, see the page numbers listed.
3. Put Batteries in the Remote
A. Pull off the cover of the battery
compartment.
B. Place the four AAA batteries as
shown, matching the +and –
end of each battery in the
compartment.
C. Replace the cover.
CONNECTIONS
GUIDE
Use This Book First!
ToFind
Your Hook-up
Turn To
Page 1
THIS GUIDE
SHOWS HOW
TO HOOK UP
YOUR TV
AND OTHER
COMPONENTS.
CAUTION: If you choose not to use the stand recommended for your TV, take precautions that the stand or
furniture the TV is placed on is properly located and of adequate size and strength to prevent the TV from
accidentally being tipped over or pulled off. This could cause damage to the TV and or personal injury.
Press TV on the remote, or
press POWER on the TV.
4. Turn on the TV
V
C
R
2
•
L
D
.
A
U
D
I
O
7 8 9
4 5 6
1 2 3
0
ANT A•BINPUT
RESETCLEAR
MOVE
P
O
W
E
R
V
C
R
D
S
S
•
C
A
B
L
E
T
V
DISPLAY SKIP
MUTE PREVCH
REW PLAY FF
REC STOP PAUSE
MENU •
PROG
V
O
L
C
H
A
N
V
O
L
C
H
A
N
SWAP
FREEZE
PIP
PIP MOVE
Quick Guide to Your TV
Startup
Plug the cord into the outlet,
matching the wide and the small
end of the plug with the outlet.
2. Plug in the TV
A. Plug the cord into the adapter
that was packed with your TV
as shown at the left.
B. Plug the adapter into the outlet,
matching the prongs with the
outlet.
2a. Use this adaptor
for models C33682
and C37683
3
A. Press MENU•PROG until the
Alarm menu is selected. This
menu is green.
B. The Clock is automatically
highlighted the first time you
set it. If it is not, press MOVE H
to highlight it.
C. Press MOVE F to set the hour.
D. Press MOVE E to set the
minutes.
A. Press MENU•PROG until the
Setup menu is selected. This
menu is white.
B. Press MOVE H to highlight
Autoprogram.
C. Press MOVE E to start placing
channels in the TV’s memory.
D. Wait until TV has cycled
through all the channels and
returns to original channel.
7. Set the Time
6. Place all available
channels in memory
(Autoprogram)
Details for adding and deleting
channels are on page 20.
12:21 AM 13
Controls Alarm Adjust Setup
Alarm: Off
Alarm Channel: 07
On Time: Disabled
Off Time: Disabled
Clock: Use –/+ to set time.
13
Controls Alarm Adjust Setup
English
Français Español
Autoprogram
Label: 13 clear
Channel Memory: 13 Stored
Cable/Air: Cable
5. Adjust PICTURE TILT.
Picture tilt is used to correct a tilted
picture from the effect of the Earth's
magnetic field on a large picture
tube. The PICTURE TILT
STRENGTH and POLARITY
switches on the back of the TV
compensate for this effect. If the
picture appears tilted, follow these
steps to improve it.
You may need to reset the switches
if the TV is moved or repositioned
in the room.
OFF
PICTURE TILT
STRENGTH
+ –
POLARITY
HIGH
LOW
BACK OF TV
A. Make sure STRENGTH switch
is in the OFF position.
B. Move STRENGTH switch to the
LOW position. If this does not
fully improve tilt, move
STRENGTH switch to HIGH.
This should correct tilt. If
moving STRENGTH switch
makes tilt worse, return it to
OFF and go to the next step.
C. Change the position of
POLARITY switch. If this
improves the tilt but does not
fully improve it, move the
STRENGTH switch to LOW or
HIGH. This should correct tilt.
Quick Guide to Your TV
Startup
V
C
R
2
•
L
D
.
A
U
D
I
O
7 8 9
4 5 6
1 2 3
0
ANT A•BINPUT
RESETCLEAR
MOVE
P
O
W
E
R
V
C
R
D
S
S
•
C
A
B
L
E
T
V
DISPLAY SKIP
MUTE PREV CH
REW PLAY FF
REC STOP PAUSE
MENU •
PROG
V
O
L
C
H
A
N
V
O
L
C
H
A
N
SWAP
FREEZE
PIP
PIP MOVE
V
C
R
2
•
L
D
.
A
U
D
I
O
7 8 9
4 5 6
1 2 3
0
ANT A•BINPUT
RESETCLEAR
MOVE
P
O
W
E
R
V
C
R
D
S
S
•
C
A
B
L
E
T
V
DISPLAY SKIP
MUTE PREV CH
REW PLAY FF
REC STOP PAUSE
MENU •
PROG
V
O
L
C
H
A
N
V
O
L
C
H
A
N
SWAP
FREEZE
PIP
PIP MOVE
Quick Guide to Your TV
Basic Tour of the Remote
4
Turns the TV on.
Sets the remote to control the TV.
Operates TV when remote is set to
control the TV.
Operates the TV and advanced
features.
TV Power Button
Volume and Channel Controls
Details are on page 6.
Basic information about your remote is shown below. This will give you a
general idea of how your remote works. For more details, see pages 6–15.
Controls components such as a
VCR, laserdisc player, audio
equipment, and a cable box.
Changes the menus and features
on the screen.
Used to watch two pictures on the
TV at the same time.
Component Buttons
Details are on pages 8–15.
Menu Buttons
See next page for details.
Picture-in-picture buttons
Details are on pages 7 and 24–25.
Yellow
Quick Guide to Your TV
Menu Basics
5
Colors
Menu Buttons
These buttons are used with the
TV’s menus to adjust the features.
You can use the menu buttons on
the remote or the front of the TV.
Press MENU•PROG repeatedly to
see each of the four menu colors.
Each menu has a different color
background as shown at the left.
V
C
R
2
•
L
D
.
A
U
D
I
O
7 8 9
4 5 6
1 2 3
0
ANT A•BINPUT
RESETCLEAR
P
O
W
E
R
V
C
R
D
S
S
•
C
A
B
L
E
T
V
DISPLAY SKIP
MUTE PREV CH
REW PLAY FF
REC STOP PAUSE
MENU •
PROG
V
O
L
C
H
A
N
V
O
L
C
H
A
N
MOVE
SWAP
FREEZE
PIP
PIP MOVE
MOVE
Green
Light
Blue
White
General information about using the on-screen menu system is shown
below. Details on using the remote buttons are on pages 6-7. Many menu items
are explained in detail in Using the Advanced Features starting on page 20.
Moving through the Menus
Controls Alarm Adjust Setup
English
Français Español
Autoprogram
Label Clear
Channel Memory: 13 Stored
Cable/Air: Cable
Controls Alarm Adjust Setup
English
Français Español
Autoprogram
Label Clear
Channel Memory: 13 Stored
Cable/Air: Cable
1. Press MENU•PROG on the
remote or MENU on the front
panel to move from menu to
menu.
2. Press MOVE 4/3on the
remote or CHANNEL up/down
on the front panel to move up
and down through the features
in the menu.
3. Press MOVE F and E on the
remote or VOLUME +/– on the
front panel to move left and
right on the menu lines.
MENU CH VOL–VOL
+
CH
Using Your TV and Remote
With Remote Buttons
6
V
C
R
2
•
L
D
.
A
U
D
I
O
7 8 9
4 5 6
1 2 3
0
ANT A•BINPUT
RESETCLEAR
MOVE
P
O
W
E
R
V
C
R
D
S
S
•
C
A
B
L
E
T
V
DISPLAY SKIP
MUTE PREV CH
REW PLAY FF
REC STOP PAUSE
MENU •
PROG
V
O
L
C
H
A
N
V
O
L
C
H
A
N
SWAP
FREEZE
PIP
PIP MOVE
POWER
Turns off the TV.
Turns off compatible VCRs.
Turns on a component after a
component button is pressed.
AUDIO, VCR, VCR2•LD,
DSS•CABLE, TV
Sets the remote to control the
component. VCR2•LD can only be
programmed for one component:
either a VCR or a Laserdisc Player.
See Using the Remote with a VCR,
Cable Box, Laserdisc Player and Audio
equipment on pages 8–15.
TV
Turns on the TV.
Shows the displays on the screen.
Sets the remote to control the TV.
See Using the Remote with a VCR,
Cable Box, Laserdisc Player and Audio
equipment on pages 8–15.
REW (Rewind)
Rewinds a tape or laserdisc.
Searches backward while tape or
laserdisc is playing.
PLAY
Plays tape or laserdisc.
FF (Fast Forward)
Fast forwards a tape or laserdisc.
Searches forward while tape or
laserdisc is playing.
REC (Record)
Starts recording onto tape.
STOP
Stops tape or laserdisc.
PAUSE
Pauses tape or laserdisc.
DISPLAY
Shows displays on the screen.
Clears menus from the screen.
SKIP (Commercial Skip)
Allows you to scan other channels during commercials.
Each press adds 30 seconds. TV
switches back to original channel
when time runs out. Press
CLEAR to cancel SKIP.
CHAN 2and
1
(Channel up and down)
Scans up and down through
channels in the TV’s memory.
Moves through channels
in VCR’s memory.
VOL + and –
(Volume up and down)
Raises and lowers sound.
MUTE
Switches the TV sound on or off.
PREV CH (Previous Channel)
Changes back and forth between
two channels.
Select a channel and then select
another. Press PREV CH to
switch between the two channels.
Using Your TV and Remote
With Remote Buttons
7
V
C
R
2
•
L
D
.
A
U
D
I
O
7 8 9
4 5 6
1 2 3
0
ANT A•BINPUT
RESETCLEAR
MOVE
P
O
W
E
R
V
C
R
D
S
S
•
C
A
B
L
E
T
V
DISPLAY SKIP
MUTE PREV CH
REW PLAY FF
REC STOP PAUSE
MENU •
PROG
V
O
L
C
H
A
N
V
O
L
C
H
A
N
SWAP
FREEZE
PIP
PIP MOVE
Number Buttons (0-9)
Selects any channel number.
Two numbers must be pressed for
each channel. Press 0 and 6 for
channel 6. For three digit channels, press and hold 1 until 1-appears on the screen. Then press
the other two numbers.
INPUT
Switches between the TV channels
and
Video 00
.
ANT A•B (Antenna)
Used as TV/VCR button when
remote is set to control the VCR.
CLEAR
Clears menus and displays from
the screen.
Clears items from VCR timer
programs and VCR’s clock.
MENU•PROG (Program)
Shows menus on the screen and
moves from menu to menu.
Sets VCR clock and programs
timer on VCR.
RESET
Returns the picture adjustments to
the original settings.
MOVE F and E (left and right)
Moves left and right on a menu
line. See Menu Basics on page 5.
Changes a feature setting.
MOVE G and H (up and down)
Moves up and down menus. See
Menu Basics on page 5.
PIP (Picture-in-Picture)
Turns the small picture on or off.
PIP MOVE
Moves the small picture to the next
corner.
SWAP
Switches the channel in the small
picture with the big picture.
FREEZE
Freezes or unfreezes the small
picture.
Using Your TV and Remote
With VCRs: Programming the Remote
8
Refer to the Connection Book or the VCR’s owners manual to hook up your VCRs.
The remote may need to be programmed for your VCR. This remote may
not operate all models of brands listed below. Use the codes below or on the
sheet packed in with your remote.
2.Program the remote for
your VCRs
1.Test the remote
A. Press VCR or VCR2 to turn
the VCR on.
B. Press the VCR buttons shown
at the left. If your VCR does
not work, program VCR or
VCR2 with a VCR code from
the list below.
A. Point the remote at the VCR
and hold VCR.
B. Enter the code for your brand
from the code list below.
C. Release VCR.
D. Press POWER. If nothing
happens, try pressing VCR and
then POWER.
E. Repeat A–D with another code
if the first one does not work or
if a second VCR is connected.
V
C
R
2
•
L
D
.
A
U
D
I
O
789
456
123
0
ANT A•BINPUT
RESETCLEAR
MOVE
P
O
W
E
R
V
C
R
D
S
S
•
C
A
B
L
E
T
V
DISPLAY SKIP
MUTE PREV CH
REW PLAY FF
REC STOP PAUSE
MENU •
PROG
V
O
L
C
H
A
N
V
O
L
C
H
A
N
SWAP
FREEZE
PIP
PIP MOVE
VCR Codes
Aiwa .................................................15
Akai ........................................03,22,23
Audio Dynamics........................14,16
Broksonic .........................................10
Canon ...............................................08
Capehart...........................................01
Citizen ..............................................09
Craig............................................07,12
Curtis Mathes........................00,08,15
Daewoo............................................13
dbx...............................................14,16
Dimensia..........................................00
Dynatech..........................................15
Emerson ...09,10,13,15,20,23,24,34,41
Fisher............................02,12,18,19,43
Funai.................................................15
GE .................................00,07,08,32,37
Goldstar.......................................09,14
Harman Kardon..............................14
Hitachi...............................05,15,35,36
Instant Replay .................................08
JCL ....................................................08
JCPenney.......02,05,07,08,14,16,30,35
JVC.....................................02,14,16,30
Kenwood...........................02,14,16,30
Lloyd ................................................15
Magnavox...................................08,29
Marantz...................02,08,14,16,29,30
Marta ................................................09
MEI ...................................................08
Memorex...........................08,09,12,15
MGA............................................04,27
Minolta........................................05,35
Mitsubishi....................04,05,27,35,40
Montgomery Ward.........................06
MTC.............................................07,15
Multitech...........................07,15,31,32
NEC ...................................02,14,16,30
Panasonic.........................................08
Pentax..........................................05,35
Philco...........................................08,29
Philips..........................................08,29
Pioneer ...................................05,16,33
ProScan.............................................00
Quartz...............................................02
Quasar..............................................08
RCA ....................00,05,07,08,28,35,37
Realistic.........02,06,08,09,12,15,19,43
Samsung.......................07,13,22,32,42
Sansui ...............................................16
Sanyo..........................................02,12
Scott.......................................04,13,41
Sears.............02,05,09,12,18,19,35,43
Sharp.....................................06,24,39
Shintom ................................17,26,31
Sony.......................................17,26,38
Sylvania................................08,15,29
Symphonic ................................02,15
Tashiko ...........................................09
Tatung.............................................30
Teac............................................15,30
Technics..........................................08
Teknika............................08,09,15,21
Toshiba .................................05,13,19
Totevision..................................07,09
Unitech ...........................................07
Vector Research........................14,16
Victor ..............................................16
Video Concepts ........................14,16
Videosonic......................................07
Wards..................................................
............05,06,07,08,12,13,15,25,31,35
Yamaha............................02,14,16,30
Zenith.........................................11,17
Using Your TV and Remote
With VCRs: Setting the VCR1 Channel
9
The VCR 1 Channel works with VCR on the remote. If the VCR 1 Channel
is set, pressing VCR selects the channel to see the VCR picture. The VCR 1
Channel setting depends on which diagram you have used from the
Connection Guide. If you want to turn this feature off, set the VCR 1
Channel to Disable. Refer to the chart below for your setting.
A.Press TV to set the remote to
control the TV.
B. Press MENU•PROG to select the
Setup menu. This menu is
white.
A.Press MOVE H (down) to
highlight the VCR 1 Channel.
B. Press E to highlight the channel.
A.Enter channel 00, 03, or 04.
Choose your setting from the
chart below. Press MOVE H
(down) until “Disabled” is
displayed to turn the feature off.
1. Select the Setup Menu
2. Highlight VCR1 Channel
3. Enter channel number
13
Controls Alarm Adjust Setup
English Français Español
Autoprogram
Label 13 Clear
Channel Memory: 13 Stored
Cable/Air: Cable
13
Controls Alarm Adjust Setup
English
Français Español
Autoprogram
Label 13 Clear
Channel Memory: 13 Stored
Cable/Air: Cable
13
Controls Alarm Adjust Setup
English
Français Español
Autoprogram
Label 13 Clear
Channel Memory: 13 Stored
Cable/Air: Cable
Diagram used from the
Connection Guide:
1B, 1C, 2B, 2C, 3B, 3C, 4C, 5C
4B, 5B
Set VCR1 Channel to:
00
3 or 4 (same as 3/4 switch)
VCR 1 Channel: 03
VCR 1 Channel: 00
A. Press VCR or VCR2•LD to set
the remote to control the VCR.
B. Press POWER.
Using Your TV and Remote
With VCRs: Basic Operation
10
A.Press channel 00 on the TV to
see what the VCR is doing.
B. Press VCR or VCR2•LD to set
the remote to control the VCR.
C. Press POWER to turn on the
VCR if it did not turn on when
you pressed VCR or VCR2•LD.
If the remote operates your VCR, this page and the next will show you
how to use it for basic functions. See page 7 for more details on buttons used
with your VCR.
7 8 9
4 5 6
1 2 3
0
ANT A•BINPUT
RESETCLEAR
MOVE
DISPLAY SKIP
MUTE PREV CH
REW PLAY FF
REC STOP PAUSE
MENU •
PROG
V
C
R
2
•
L
D
.
A
U
D
I
O
P
O
W
E
R
V
C
R
D
S
S
•
C
A
B
L
E
T
V
V
O
L
C
H
A
N
V
O
L
C
H
A
N
SWAP
FREEZE
PIP
PIP MOVE
Turn on the VCR
Turn off the VCR
Using Your TV and Remote
With VCRs: Basic Operation
11
A. Press VCR or VCR2•LD to set
the remote to control the VCR.
B. Tune the VCR to the channel
you want to record using
CHANNEL up and down or
pressing two number buttons.
C. Press RECORD to start
recording.
D. Press TV/VCR on the VCR.
E. Press TV to set the remote to
control the TV.
F. Press CHANNELup or down to
change channels on the TV.
G. To see the channel you are
recording, tune the TV back to
channel 00.
A. Turn on VCR.
B. Insert a tape in the VCR.
C. Press PLAY to start the tape
playing.
D. Press STOP when you are
finished.
E. Press REW to rewind the tape.
Watch a tape in your VCR
If the remote operates your VCR, this page and page 10 will show you
how to use it for basic functions. See page 7 for more details on buttons used
with your VCR.
V
C
R
2
•
L
D
.
A
U
D
I
O
7 8 9
4 5 6
1 2 3
0
ANT A•BINPUT
RESETCLEAR
MOVE
P
O
W
E
R
V
C
R
D
S
S
•
C
A
B
L
E
T
V
DISPLAY SKIP
MUTE PREV CH
REW PLAY FF
REC STOP PAUSE
MENU •
PROG
V
O
L
C
H
A
N
V
O
L
C
H
A
N
SWAP
FREEZE
PIP
PIP MOVE
Record one TV program
and watch another
Using Your TV and Remote
With a Cable Box: Programming and Basic Operation
12
Refer to the Connection Book or contact your cable company to hook up your cable
box. If you have a cable box with its own remote, then you may also be able
to use the TV’s remote with your cable box. This remote may not operate
all models of the brands listed below. Use the codes below or on the sheet
packed in with your remote.
Program the remote for your
cable box
A.Point the remote at the cable
box and hold CABLE.
B. Enter the code numbers for
your brand from the list below.
C. Release CABLE.
D.Press POWER to turn it on. If
nothing happens, try pressing
CABLE and then POWER.
E. Repeat A-D with another code
if the first one does not work.
A.Tune TV to channel 02, 03, 04,
05, or 06--the cable box channel.
B. Point remote at the cable box
and press CABLE.
C. Press POWER to turn it on.
D.Press CHANNEL up or down to
change channels on the cable
box.
A. Press CABLE.
B. Press POWER to turn it off.
Basic Operation:
Turn on the Cable Box
Turn off the Cable Box
V
C
R
2
•
L
D
.
A
U
D
I
O
7 8 9
4 5 6
1 2 3
0
ANT A•BINPUT
RESETCLEAR
MOVE
P
O
W
E
R
V
C
R
D
S
S
•
C
A
B
L
E
T
V
DISPLAY SKIP
MUTE PREV CH
REW PLAY FF
REC STOP PAUSE
MENU •
PROG
V
O
L
C
H
A
N
V
O
L
C
H
A
N
SWAP
FREEZE
PIP
PIP MOVE
ABC ..............................................22,46
Anvision.......................................07,08
Cablestar......................................07,08
Eagle..................................................08
Eastern International.......................02
General Instrument.............................
....................04,05,15,23,24,25,30,36,46
Hamlin...............................12,13,34,48
Hitachi.....................................37,43,46
Jerrold....................................................
..........04,05,15,23,24,25,30,36,45,46,47
MACOM......................................37,43
Magnavox.............................................
..........07,08,19,21,26,28,29,32,33,40,41
NSC ...................................................09
Oak ..........................................01,16,38
Oak Sigma ........................................16
Panasonic................................03,27,39
Philips ...................................................
..........07,08,19,21,26,28,29,32,33,40,41
Pioneer ....................................18,20,44
Randtek........................................07,08
RCA..............................................00,27
Regal.............................................12,13
Regency........................................02,33
Samsung ...........................................44
Scientific Atlanta....................03,22,35
Signature...........................................46
Sprucer..............................................27
Starcom .............................................46
Sylvania.............................................11
Teknika .............................................06
Texscan.........................................10,11
Tocom.................................17,21,49,50
Unika.......................................31,32,41
Viewstar................................................
..........07,08,19,21,26,28,29,32,33,40,41
Warner Amex...................................44
Zenith...........................................14,42
Cable Box Codes
Using Your TV and Remote
With a Cable Box: Setting the Cable Channel
13
The Cable Channel works with CABLE on the remote. If the Cable
Channel is set, pressing CABLE selects the channel to see cable channels.
The Cable Channel setting depends on which channel your cable box
must be on to see cable channels. The channels usually used are 02, 03,
04, 05 or 06. Consult your cable company for more information.
A.Press TV to set the remote to
control the TV.
B. Press MENU•PROG to select the
Setup menu. This menu is
white.
A.Press MOVE H (down) to move
down the menu until Cable
Channel is highlighted.
B. Press E to underline the
channel.
A.Enter the number for your cable
box, either 02,03,04,05, or 06.
Press MOVE H (down) until
“Disabled” is displayed to turn
this feature off.
1. Select the Setup menu
2. Highlight Cable Channel
3. Enter channel number
VCR 1 Channel: 00
Cable Channel: 02
13
Controls Alarm Adjust Setup
English
Français Español
Autoprogram
Label 13 Clear
Channel Memory: 13 Stored
Cable/Air: Cable
VCR 1 Channel: 00
Cable Channel: 02
13
Controls Alarm Adjust Setup
English
Français Español
Autoprogram
Label 13 Clear
Channel Memory: 13 Stored
Cable/Air: Cable
VCR 1 Channel: 00
Cable Channel: 03
13
Controls Alarm Adjust Setup
English
Français Español
Autoprogram
Label 13 Clear
Channel Memory: 13 Stored
Cable/Air: Cable
Using Your TV and Remote
With a Laserdisc Player: Programming and Basic Operation
14
Refer to your Laserdisc Player owner’s manual to hook up your Laserdisc Player.
The remote may need to be programmed for your laserdisc player. This
remote may not operate all models of brands listed below. Use the codes below
or on the sheet packed in with your remote.
A.Tune TV to channel 00, 03, or 04.
B. Point the remote at the laserdisc
player and press VCR2•LD.
C. Press POWER to turn it on.
D.Use the buttons on the remote
that relate to laserdisc player
functions. Not all buttons highlighted may work with your
laserdisc player.
E. Press POWER to turn it off.
Program the remote for
your Laserdisc Player
A.Point the remote at the laserdisc
player and hold VCR2•LD.
B. Enter the code for your brand
from the code list below.
C. Release VCR2•LD.
D.Press POWER. If nothing
happens, try pressing
VCR2•LD and then POWER.
V
C
R
2
•
L
D
.
A
U
D
I
O
7 8 9
4 5 6
1 2 3
0
ANT A•BINPUT
RESETCLEAR
MOVE
P
O
W
E
R
V
C
R
D
S
S
•
C
A
B
L
E
T
V
DISPLAY SKIP
MUTE PREV CH
REW PLAY FF
REC S STOP PAU E
MENU
•
PROG
V
O
L
C
H
A
N
V
O
L
C
H
A
N
SWAP
FREEZE
PIP
PIP MOVE
Basic Operation
Pioneer........................33
ProScan.......................33
RCA.............................33
Laserdisc Player Codes
Using Your TV and Remote
With Audio Equipment: Programming and Basic Operation
15
Basic Operation
Program the remote for
audio equipment
A. Point the remote at the audio
equipment and hold AUDIO.
B. Enter the code from the code
list.
C. Release AUDIO.
D. Press POWER to turn it on. If
nothing happens, try pressing
AUDIO and then POWER.
E. Repeat A–D with another code
if the first one does not work.
A. Point the remote at the audio
equipment and press AUDIO.
B. Press POWER to turn it on.
C. Use the buttons on the remote
that relate to audio functions.
Not all buttons highlighted
may work with your
equipment.
D. Turn the audio equipment off
using the audio component’s
power off button.
V
C
R
2
•
L
D
.
A
U
D
I
O
7 8 9
4 5 6
1 2 3
0
ANT A•BINPUT
RESETCLEAR
MOVE
P
O
W
E
R
V
C
R
D
S
S
•
C
A
B
L
E
T
V
DISPLAY SKIP
MUTE PREV CH
REW PLAY FF
REC STOP PAUSE
MENU •
PROG
V
O
L
C
H
A
N
V
O
L
C
H
A
N
SWAP
FREEZE
PIP
PIP MOVE
RCA/ Dimensia
AM/FM...........................03
CD....................................07
Tape.................................06
Phono ..............................05
Aux ..................................04
Audio Codes
Refer to the Connection Book or your Audio equipment owner’s manual to hook
up your audio equipment. Your remote controls only RCA audio equipment
such as a radio, CD player, tape player, turntable, or amplifier. The
remote may need to be programmed for your equipment. This remote
may not operate all models of brands listed below. Use the codes below or
on the sheet packed in with your remote.
Adjusting Your TV
Overall Picture
16
Follow the steps below to lighten or darken the overall picture without
changing the color levels.
1. Select the Controls Menu
Press MENU•PROG to select the
Controls menu. This menu is
yellow.
Press MOVE H (down) to highlight Picture.
Press MOVE E (right) to lighten
the picture.
OR
Press MOVE F (left) to darken the
picture.
2. Highlight Picture
3. Use MOVE E and F to
adjust the Picture
Controls Alarm Adjust Setup
Sleep Timer: -:--
Closed Captioning: Off
Picture -.....
I.....+
Stereo: On
SAP: Off
Controls Alarm Adjust Setup
Sleep Timer: -:-Closed Captioning: Off
Picture -.....
I
.....+
Stereo: On
SAP: Off
Picture -.......I...+
Adjusting Your TV
Picture Settings
1. Select the Adjust Menu
Press MENU•PROG repeatedly to
select the Adjust menu. This menu
is light blue.
Press MOVE H (down) to
highlight the picture item you
want to adjust.
Press MOVE E or F to adjust each
item.
2. Highlight item to change
3. Use MOVE E or F to
adjust each item
Follow the steps below to change the picture on the screen to your
personal setting. The chart at the bottom of the page explains your options.
Color
Tint
Bright (Brightness)
Sharp (Sharpness)
Autocolor
Picture Reset
Press MOVE E to:
Increase color richness
Give red tint to skin color
Add more light to dark parts of
the picture
Show cleaner, clearer images
Turn on to keep Color and Tint in
proper balance each time you
change channels
Reset the picture back to the
original settings
Press MOVE F to:
Lower color to black and white
Give green tint to skin color
Add more dark to light parts of
the picture
Make picture more smooth
Turn off for manual adjustment
of Color and Tint
Reset the picture back to the
original settings
Picture Reset
17
Controls Alarm Adjust Setup
Color -.....
I
.....+
Tint G.....
I
.....R
Bright -.....
I
.....+
Sharp -.....
I
.....+
Autocolor: On
Controls Alarm Adjust Setup
Color -.....
I
.....+
Tint G.....
I
.....R
Bright -.....
I
.....+
Sharp -.....
I
.....+
Autocolor: On
18
1. Select the Controls Menu
Press MENU•PROG to select the
Controls menu. This menu is
yellow.
Press MOVE H (down) to
highlight the sound item you
want to adjust.
Press MOVE E or F to adjust each
item.
2. Highlight item to change
3. Use MOVE E or F to
adjust each item
Adjusting Your TV
Sound Settings: Stereo, Expanded Stereo, SAP and Tone
Tone: High
Controls Alarm Adjust Setup
Sleep Timer: -:-Closed Captioning: Off
Picture -.....
I
.....+
Stereo: On
SAP: Off
Controls Alarm Adjust Setup
Sleep Timer: -:-Closed Captioning: Off
Picture -.....
I
.....+
Stereo: Expanded
SAP: Off
Off
Sound is reproduced in
mono.
Off
Sound is reproduced in
Stereo, Expanded Stereo
or Mono, whichever is
selected in the Stereo
Menu Item.
Low
Low pitched sounds are
louder.
Expanded
Expanded stereo adds greater
width and dimension to stereo
broadcasts creating a more
spacious stereo sound effect.
On
Sound is automatically
reproduced in stereo or
mono, whichever the TV
station is broadcasting.
On
Sound is reproduced in
another sound channel.
If nothing happens,
your broadcast may not
have SAP.
High
High pitched sounds are
louder.
Stereo
SAP
Tone
Follow these steps to adjust the Stereo, Expanded Stereo, SAP or Tone of
your TV. SAP (Second Audio Program) is sometimes used to offer the
program being watched in another language.The chart below explains
your options.
VCR 1 Channel: Video
Cable Channel: 03
Speakers: Off
Adjusting Your TV
Sound Settings: Speakers
19
1. Select the Setup Menu
Follow the steps below to turn the speakers on or off in your TV. The
chart below explains your options.
Press MENU•PROG repeatedly to
select the Setup menu. This menu
is white.
Press MOVE H (down) until
Speakers is highlighted.
Press MOVE E or F to turn the
speakers on or off.
2. Highlight speakers
3. Turn Speakers on or off
Cable Channel: 03
Speakers: Off
Off
No sound comes from the TV.
On
The sound comes from the TV's
internal speakers.
Speakers
Speakers: On
Controls Alarm Adjust Setup
English
Français Español
Autoprogram
Label 13 Clear
Channel Memory: 13 Stored
Cable/Air: Cable
Controls Alarm Adjust Setup
English
Français Español
Autoprogram
Label 13 Clear
Channel Memory: 13 Stored
Cable/Air: Cable
Controls Alarm Adjust Setup
English
Français Español
Autoprogram
Label 13 Clear
Channel Memory: 13 Stored
Cable/Air: Cable
VCR 1 Channel: Video
VCR 1 Channel: Video
Cable Channel: 03
Using Advanced Features
Placing Channels in Memory (Autoprogramming)
20
Only channels 2–13 appear in the TV’s memory when you first turn it on.
The channels available in your area must be programmed into the TV's
memory when you hook up your TV. Using CHANNEL up or down
allows you to scan through these channels.
You may want to add or delete a few channels if some stations have weak
signals or were off the air when the TV was programmed. Refer to the Add
or Delete Channels section below.
A. Hook up an antenna, cable or
components before you begin
these steps or you will not be
able to add channels into
memory.
B. Press MENU•PROG repeatedly
to select the Setup Menu and
highlight Autoprogram. This
menu is white.
C. Press MOVE H (down) to start
the TV adding all active
channels into memory.
D. Wait until the TV has cycled
through all the channels and
returns to the original channel.
1. Place channels in
memory (Autoprogram)
2. Add or delete channels
A. Press MENU•PROG repeatedly
to select the Setup menu. This
menu is white.
B. Press MOVE H (down) to
highlight Channel Memory.
C. Press MOVE E to underline the
channel number.
D. Select the channel number you
want to add or delete with the
number buttons.
E. Press MOVE E to add or delete
a channel (you will see Stored
on the screen when added and
Erased when deleted).
F. Repeat D and E for more
channels.
13
Controls Alarm Adjust Setup
English
Français Español
Autoprogram
Label 13 Clear
Channel Memory: 13 Stored
Cable/Air: Cable
15
Controls Alarm Adjust Setup
English
Français Español
Autoprogramming
Label 13 Clear
Channel Memory: 13 Stored
Cable/Air: Cable
13
Controls Alarm Adjust Setup
English
Français Español
Autoprogram
Label 13 Clear
Channel Memory: 13
Stored
Cable/Air: Cable
13
Controls Alarm Adjust Setup
English
Français Español
Autoprogram
Label 13 Clear
Channel Memory: 13
Erased
Cable/Air: Cable
21
Using Advanced Features
Naming the Channels
You can name the channels using the character list below. Full appears
beside Label when the memory is used up. Fixed appears beside Label
for channel 00--it cannot be named.
A. Press MENU•PROG repeatedly
to select the Setup menu. This
menu is white.
B. Press MOVE H (down) to
highlight Label.
C. Press MOVE E to underline the
channel number.
D. Select the channel number with
the number buttons.
E. Press MOVE E to underline the
first character of the name.
F. Choose the character using
MOVE G/H (up or down).
G. Repeat E–F to complete the
name.
H. Press MOVE F to move
backward if you want to
change an item.
A. Follow A and B above.
B. Press MOVE E until clear is
underlined.
C. Press MOVE G/H (up or down)
to clear the name.
1. Name a channel
2. Erase a name
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z &
’ ( ) á + , – . / 0 1 2 3 4 5 6 7 8 9 : ; < = > ? @ blank space
Character List
12
Controls Alarm Adjust Setup
English
Français Español
Autoprogram
Label 12
Clear
Channel Memory: 12 Stored
Cable/Air: Cable
XET 12
Controls Alarm Adjust Setup
English
Français Español
Autoprogram
Label 12 XET
Clear
Channel Memory: 13 Stored
Cable/Air: Cable
12
Controls Alarm Adjust Setup
English
Français Español
Autoprogram
Label 12 Clear
Channel Memory: 13 Stored
Cable/Air: Cable
22
Using Advanced Features
Setting the Sleep Timer
You can set your TV to turn itself off. If you’re watching TV at night and
fall asleep, the TV will turn off for you.
1. Set Sleep Timer
2. Add more time
3. Cancel the Timer
Controls Alarm Adjust Setup
Sleep Timer: – : ––
Closed Captioning: Off
Picture -.....
I
.....+
Stereo: On
SAP: Off
11:00 PM 13
Sleep
Controls Alarm Adjust Setup
Sleep Timer: 0 : 15
Closed Captioning: Off
Picture -.....
I
.....+
Stereo: On
SAP: Off
Controls Alarm Adjust Setup
Sleep Timer: 0 : 01
Closed Captioning: Off
Picture -.....
I
.....+
Stereo: On
SAP: Off
Controls Alarm Adjust Setup
Sleep Timer: – : ––
Closed Captioning: Off
Picture -.....
I
.....+
Stereo: On
SAP: Off
A. Press MENU•PROG to select
the Controls menu and
highlight Sleep Timer. This
menu is yellow.
B. Press MOVE E to enter the
amount of time you want to
watch TV before it shuts off.
Each press equals 15 minutes.
C. Press MOVE F to subtract time
from the sleep timer.
A. When 0:01 appears on the
screen, the TV will shut off in
one minute. Press MOVE E to
add more time.
A. Press MENU•PROG to select
the Controls menu and
highlight Sleep Timer.
B. Press MOVE F until the time
reaches – : – –.
Using Advanced Features
Setting the Alarm Clock
23
The TV can be set to turn on each day like your alarm clock. You can set
it to turn on to your favorite channel at a certain time. You can also set it
to turn itself off again. The Alarm cannot be used until the clock is set.
1. Turn on the Alarm
2. Set the Alarm Channel
3. Set On and Off Times
12:34 AM 13
Alarm
Controls Alarm Adjust Setup
Alarm: On
Alarm Channel: 07
On Time: Disabled
Off Time: Disabled
Clock: 12 : 34 AM
12:34 AM 13
Alarm
Controls Alarm Adjust Setup
Alarm: On
Alarm Channel: 07
On Time: Disabled
Off Time: Disabled
Clock: 12 : 34 AM
12:34 AM 13
Alarm
Controls Alarm Adjust Setup
Alarm: On
Alarm Channel: 07
On Time: 7 : 30 AM
Off Time: Disabled
Clock: 12 : 34 AM
12:34 AM 13
Alarm
Controls Alarm Adjust Setup
Alarm: On
Alarm Channel: 07
On Time: 7 : 30 AM
Off Time: Disabled
Clock: 12 : 34 AM
A. Press MENU•PROG to select
the Alarm menu and highlight
Alarm. This menu is green.
B. Press MOVE E or F to select
On or Off.
A. Press MOVE H (down) to
highlight the Alarm Channel.
B. Press MOVE E to highlight the
channel number.
C. Enter the channel that you
want the TV to turn on to with
the number buttons.
A. Press MOVE H (down) to
highlight the On or Off Time.
B. Press MOVE F to set the hour.
C. Press MOVE E to set the
minutes.
D. Press and hold MOVE F to
choose Disabled. This turns
the TV only on or only off at a
certain time each day.
Using Advanced Features
Watching Picture-in-Picture
24
Picture-in-Picture allows you to display a small picture within the big picture of the TV screen. To watch two different programs at once, you must
connect a VCR, Laserdisc Player or Camcorder. You may need to disable
the VCR1 Channel if you can not get two different programs at once.
A. Hook up a VCR, Laserdisc
Player, or Camcorder to the
video jacks on the back of the
TV. See the Connections Guide.
B. Press TV to turn the TV on.
C. Press CHANNEL up or down to
select the channel you want to
watch on the big picture.
D. Turn on the VCR, Laserdisc
Player, or Camcorder.
E. Press PIP to put the small
picture on the screen. It is the
same as the big picture.
F. Press 00 to see the signal from
the VCR, Laserdisc Player, or
Camcorder connected to the
video jacks.
Press CHANNEL up and down or
two number buttons to change
channels on the large picture.
Change channels on your VCR,
Laserdisc Player, or Camcorder to
change channels on the small picture.
Turn on Picture-in-Picture
Change channels on the
large picture
Change channels on the
small picture
TV Picture
02
PIP 00
02
PIP 00
10
PIP 00
10
PIP 00
VCR, Laserdisc
Player , or
Camcorder
Picture
TV Picture
TV Picture
Using Advanced Features
Watching Picture-in-Picture
25
Press PIP MOVE to move the
small picture to the next corner.
Press SWAP to switch the small
picture with the big picture.
A. Press FREEZE to stop action in
the small picture.
B. Press FREEZE again to return
to an action picture.
Press PIP to turn off
picture-in-picture.
Move the small picture
Swap the big picture with
the little picture
Freeze the small picture
Turn off Picture-in-Picture
S
S
D
•
C
A
R
B
C
L
V
E
R
E
W
O
P
V
REW PLAY FF
REC STOP PAUSE
DISPLAY SKIP
L
O
V
MUTE PREV CH
123
456
789
PIP
PIP MOVE
2
R
C
0
MENU•
T
V
D
.
A
L
•
U
D
O
I
A
N
H
C
V
O
L
C
N
H
A
ANT A•BINPUT
PROG
RESETCLEAR
SWAP
MOVE
FREEZE
26
Closed captioning displays the audio portion of a program as words on
the TV screen. It is useful for the deaf, hearing impaired, or anyone who
wants to watch a program without sound. If you have turned Closed
Captioning on and it does not appear on the screen, it is not available on
the channel you are watching. This TV does not support the text mode.
Text information typically consists of program information, weather
bulletins, local activities, etc.
Press MENU•PROG to select the
Controls menu. This menu is
yellow.
Press MOVE H (down) to highlight
Closed Captioning.
Press MOVE F or E to select Off,
C1, or C2. Select C1 for full translation of the primary language in
your area. Select C2 for secondary
language translation, simplified
English, or whatever is being
broadcast in your area.
1. Select the Controls Menu
2.Highlight Closed
Captioning
3.Select Setting
Controls Alarm Adjust Setup
Sleep Timer: – : ––
Closed Captioning: Off
Picture -.....
I
.....+
Stereo: On
SAP: Off
Controls Alarm Adjust Setup
Sleep Timer: – : ––
Closed Captioning: C1
Picture -.....
I
.....+
Stereo: On
SAP: Off
Using Advanced Features
Selecting a Language
The on-screen displays in this TV can be displayed in three languages:
English, French, and Spanish. When you select a language, most of the
displays will be shown on the screen in your preferred language.
13
Controls Alarm Adjust Setup
English
Français Español
Autoprogram
Label: 13 Clear
Channel Memory: 13 Stored
Cable/Air: Cable
1. Select the Setup menu
2. Select Language
Press MENU repeatedly to select
the Setup menu. This menu is
white.
Press MOVE F or E to select
English, Français (French), or
Español (Spanish).
Watching Closed Captioning
Using Advanced Features
Setting Your TV for Antenna or Cable
27
Your TV automatically adjusts this feature when the TV places channels
in memory (autoprogram). Follow the steps below to change the setting
as needed.
Press MENU•PROG repeatedly to
select the Setup menu. This menu
is white.
Press MOVE H (down) to
highlight Cable/Air.
Press MOVE F or E to select
Cable or Air. Select Cable if you
have cable. Select Air if you have
a home antenna connected to
your TV.
1. Select the Setup menu
2. Highlight Cable/Air
3. Select Cable or Air
13
Controls Alarm Adjust Setup
English
Français Español
Autoprogram
Label 13 Clear
Channel Memory: 13 Stored
Cable/Air: Cable
13
Controls Alarm Adjust Setup
English
Français Español
Autoprogram
Label 13 Clear
Channel Memory: 13 Stored
Cable/Air: Cable
13
Controls Alarm Adjust Setup
English
Français Español
Autoprogram
Label 13 Clear
Channel Memory: 13 Stored
Cable/Air: Air
References
Front Panel Buttons
28
MENU
CH 2and
1
VOL + and –
(Also VOL2and VOL 1)
POWER
Shows menus on screen.
Moves from menu to menu.
Channel up and down.
Scans up and down through channels in the TV’s memory.
Moves up and down menus.
Volume up and down
Raises and lowers sound.
Moves left and right on a menu line.
Changes a features setting.
Turns the TV on or off.
For details on using buttons with menus, see Menu Basics on page 5.
MENU CH VOL
–
VOL+POWERCH
12:00 AM XETU 13
Alarm Sleep PIP 00
Volume –.......I.......+
Mute Stereo 1:55
References
Displays on the Screen
29
Your TV shows the settings of several features on the screen. To see what
features have been set on your TV, press DISPLAY on the remote.
Screen Display Description
12:00 AM Time of the clock. Details are on page 3.
XETU Name you chose to describe the channel. Details are on page 21.
13 Channel number you are watching.
Video 00 Indicates that a component is connected to the VIDEO jack on the back of
the TV, it is turned on, and channel 00 is selected.
Alarm Alarm clock is set to turn on or off. Details are on page 23.
Sleep Sleep Timer is set to turn off the TV. Details are on page 22.
PIP 00 Picture-in-picture is turned on to channel 00. Details are on pages 24-25.
Volume Sound level of the TV.
Unusable Signal No signal is coming in on video input channel 00.
Mute There is no sound. See MUTE button on page 6.
Stereo The sound is being broadcast in stereo. Details are on page 18.
Stereo* SAP is selected in the menu, but it is not available for the program being
broadcast. Details are on page 18.
SAP Secondary Audio Program. SAP is selected and it is available for the
program being broadcast. Details are on page 18.
1:55 The time remaining for commercial skip. Details are on page 6.
or
Video 00
or
Unusable Signal
or
Stereo*, SAP
References
Trouble Checks
30
You may have problems that can be fixed with a few minor adjustments.
Look for the type of problem you are having below and then try the
suggestions to get your TV going again.
Checks and Adjustments
Plug TV in.
Plug something else into the outlet to make sure it is working.
Make sure batteries in the remote are not dead.
Aim the remote at the TV and press TV.
Make sure batteries are placed in the remote the right way. See batteries
on page 2.
Unplug TV for a few minutes and then turn it on again.
Check antenna connections.
Check position of Cable/Air feature. See page 27.
Try another channel. Inactive channel may be tuned.
Make sure component connected to the VIDEO INPUT jacks is turned on
if you choose channel 00.
Make sure TV is tuned to the same channel as the switch on back of VCR
if watching a VCR.
Make sure TV/VCR button on VCR is in correct position when using VCR.
Try another channel.
Scan the channels.
Check antenna connections.
Adjust TV picture. See pages 16–17.
Make sure small picture is tuned to channel 00.
Make sure the component connected to the back of the TV is turned on.
Make sure a video cable is also connected to the TV’s VIDEO INPUT jack
if using an S-VHS component.
Make sure the AUDIO and VIDEO OUT jacks on the VCR, Laserdisc
player, or Camcorder are connected to the TV’s VIDEO and AUDIO IN
jacks.
Make sure VCR 1 Channel is set to Disabled. See page 9.
Trouble
Power
TV will not turn on
No picture, no sound but
TV has power
Picture
Blank screen or Unusable
Signal appears on screen
Picture poor, sound okay
Picture-in-Picture
Can't get two different
channels in picture-in-picture
References
Trouble Checks
31
Checks and Adjustments
Press TV to set the remote to control the TV. See buttons on page 6-7.
Clear the path between the remote and TV of any objects.
Aim the remote at the component you are trying to control.
Press TV so remote will control TV.
Make sure batteries in the remote are not dead.
See if batteries are placed in remote correctly. See batteries, page 2.
Press number buttons. Channel may not be in memory. See autoprogram
on page 20.
Make sure TV/VCR switch on VCR is in the TV position.
For numbers over 100, press and hold 1 until 1-- appears, then press the
other two numbers.
Set Cable/Air feature to Cable for channels higher than 69. See page 27.
Turn Stereo off. The stereo broadcast may not be clear. See page 18.
Press VOLUME + or MUTE to restore sound.
Make sure TV’s speakers are on. Details are on page 19.
Try another channel.
Try adjusting the Tone. See page 18.
Change Stereo to off. The stereo broadcast may not be clear. See page 18.
Make sure Stereo is turned on. See page 18.
Check Sleep Timer. See sleep timer on page 22.
Wait 30 seconds and turn on again, a power surge may have occured.
Check Alarm Off time. See alarm clock on page 23.
Check Alarm On Time. See alarm clock on page 23.
Check clock time. See clock on page 3.
Make sure alarm is turned on or off. See alarm clock on page 23.
Check clock time. See clock on page 3.
Trouble
Remote
Buttons don't work when you
press them
Works part or none of the
time
Can’t select certain channel
Sound
Noisy stereo reception
Picture okay, no sound
Picture okay, sound poor
No stereo on stereo station
TV Turns on or off
Turns off by itself
Turns on by itself
Does not turn off at
Alarm Time
References
Index
32
A
Adding Channels to Memory....20
Adjust Menu
Autocolor...................................17
Bright..........................................17
Color...........................................17
Picture Reset..............................17
Sharpness...................................17
Tint..............................................17
Adjusting
Picture........................................16
Picture Settings.........................17
Sound Settings .....................18,19
Air or Cable Feature.................27
Alarm Channel.............................23
Alarm Clock.................................23
Alarm Display..............................28
Alarm Menu.................................23
Alarm .........................................23
Alarm Channel..........................23
Off Time.....................................23
On Time .....................................23
Set Clock ......................................3
ANT A•B Button...........................7
Antenna ........................................27
Audio ...............................7,15,18,19
AUDIO Button..........................7,15
Audio Codes ................................15
Audio Equipment Buttons.........15
CLEAR
FF/Fast Forward
PAUSE
PLAY
REC/Record
REW/Rewind
STOP
Autocolor......................................17
Autoprogram ............................3,20
B
Batteries (Remote) .........................2
Bright ............................................17
Brightness.....................................17
Buttons
+ and – ..........................2,3,4,5,6,7
Audio Equipment.....................15
Component..................................4
Laserdisc....................................14
Menu .........................................4,5
Number........................................6
Picture-in-Picture...........4,7,24,25
Power ...........................................6
Remote Control.....................4,6,7
TV ............................................4,12
TV Front Panel..........................28
VCR ............................................13
C
CABLE/ANTENNNA Jack .......15
Cable Box.................................12,13
Cable Box Codes..........................12
CABLE Button......................7,12,13
Cable Channel..............................13
Cable or Air Feature....................27
Cancelling Sleep Timer...............22
Captioning, Closed......................26
Cautions...........................................i
Channel Label..............................21
Channel Memory......................3,20
Channel Name Display ..............29
Channel Number Display..........29
CHANNEL Up/Down Buttons
Remote ...................................4,5,6
TV ...............................................28
Channels
Adding.......................................20
Deleting......................................20
Naming.................................21,29
Placing in Memory................3,20
Checks and Adjustments.......30,31
Cleaning........................Back Cover
CLEAR Button ............................6,7
Clock...........................................3,23
Closed Captioning.......................26
Codes
Audio .........................................15
Cable Box...................................12
Laserdisc Player........................14
VCR ..............................................8
Color..............................................17
Colors (Menus) ..............................5
Commerical Skip......................6,29
Button...........................................6
Display.......................................29
Component Buttons....................13
AUDIO, CABLE, LD,
VCR, VCR2, Components
Audio Equipment.....................15
Cable Box..............................12,13
Laserdisc Player........................14
VCR .................................8,9,10,11
Contents..........................................1
Controls
TV Front Panel..........................28
Remote ......................................6,7
Controls Menu
Closed Captioning....................26
Picture........................................16
Sleep Timer................................22
Stereo..........................................18
Tone............................................18
D
Delete Channels from Memory.20
DISPLAY Button.......................6,23
Displays (On-Screen) ..................29
Alarm, Channel Name,
Channel Number, Commerical
Skip, Mute, PIP 00, Sleep, Stereo,
Time, Unusable Signal,
VIDEO 00, Volume
DISPLAY Button.......................6,29
E
Erase a Name ...............................21
Erasing Channels from Memory20
F
FF/Fast Forward Button ..............7
Front Panel Controls................4,28
FREEZE Button.........................7,25
G
Guide
Colors...........................................5
Menu Buttons...........................4,5
Moving through the Menus......5
TV ........................................2,3,4,5
H
Hook up TV....Connections Guide
I
INPUT Button................................7
L
Laserdisc Player Codes...............14
Laserdisc Player Buttons.........7,14
FF/Fast Forward, PAUSE, PLAY,
PROG/Program, REW/Rewind,
STOP
Laserdisc Player...........................14
M
MENU Buttons ...........................4,5
Menus..............................................5
Menu Colors...................................5
Mono .............................................18
MOVE Button...........................2,5,7
Moving through the Menus.........5
MUTE Button.................................6
Mute Display................................29
N
Naming the Channels.................21
Number Buttons............................6
33
O
Off Time (Alarm).........................23
On-Screen Displays.....................29
On Time (Alarm).........................23
P
PAUSE Button........................7,8,14
Picture......................................16,17
Picture Adjustments...............16,17
Picture-in-Picture..............4,7,24,25
Change Channels......................24
Turn on.......................................24
Turn off......................................25
Use PIP Buttons.....................7,25
Picture-in-Picture Buttons....7,25
FREEZE, PIP, PIP MOVE, SWAP
Picture Settings.......................16,17
Picture Reset.................................17
PIP.......................................4,7,24,25
PIP Button..........................4,7,24,25
PIP 00 Display..............................29
PIP MOVE Button ....................7,25
Place Channels in Memory.....3,20
PLAY Button.....................7,8,14,15
Plug in TV.......................................2
Polarity Switch...............................3
POWER Button...........................2,6
Power Buttons.............................2,6
PREV CH Button ...........................6
Previous Channel Button .............6
Problem Solving .....................31,32
PROG /Program Button...............7
Programming the Remote
Audio Equipment.....................15
Cable Box..............................12,13
Laserdisc Player........................14
VCR .................................8,9,10,11
Put Batteries in Remote ................2
Q
Quick Guide to Your TV .....2,3,4,5
R
REC/Record Button............7,11,15
References ...............................28-33
Trouble Checks....................30,31
Remote Control
Batteries .......................................2
Buttons......................................6,7
Tour..............................................4
With Components..............7,8-15
RESET Button.................................6
REW/Rewind Button .7,8,11,14,15
S
Safety Information .........................i
Screen Displays............................29
Set Clock .........................................3
Set Time ..........................................3
Setting Cable/Air........................27
Setting the Cable Channel..........12
Setting the Sleep Timer...............22
Setup Menu
Autoprogram .........................3,20
Cable/Air ..................................27
Cable Channel...........................13
Channel Label...........................21
Channel Memory...................3,20
Speakers.......................................9
VCR 1 Channel............................8
Sharpness......................................17
SKIP.................................................6
Sleep Display...........................22,28
Sleep Timer...................................22
Sharpness......................................17
Sound .......................................18,19
Speakers........................................19
Startup..........................................2,3
Stereo.............................................18
Stereo Display..............................29
STOP Button......................7,8,11,15
SWAP Button....................4,7,24,25
T
Table of Contents...........................1
Time
Alarm .........................................23
Clock.............................................3
Sleep Timer................................22
Time Display................................29
Tint.................................................17
Tone...............................................18
Tour of the Remote........................4
Trouble Checks.......................30,31
Turn on Alarm.............................23
Turn on Picture-in-Picture....24,25
Turn on TV.....................................2
TV
Buttons.................................4,6,28
Guide to .................................2,3,4
TV Button .................................3,4,6
Time.................................................3
Two Pictures at one time.......24,25
U
Unusable Signal Display............29
Using Advanced Features.....20-27
Naming the Channels..............21
Place Channels in Memory.....20
Setting Cable or Air..................27
Setting the Alarm Clock ..........23
Setting the Sleep Timer............22
Watching Closed Captioning..26
Watching Two Pictures ......24,25
Using the Remote
Audio Equipment.....................15
Laserdisc Player........................14
Cable Box..............................12,13
VCR .................................8,9,10,11
V
VCR
Turn on.......................................10
Turn off......................................10
Record one TV program and
watch another ...........................11
Watch a tape..............................11
VCR Button .........................7,8,9,10
VCR 1 Channel...............................8
VCR2 Button .......................7,8,9,10
VCR Codes .....................................8
VCR Buttons................................7,8
CLEAR, FF/Fast Forward,
PAUSE, PLAY, PROG/Program,
REC/Record, REW/Rewind,
STOP
VIDEO 00 Display.......................29
Volume Display...........................29
VOL + and – Buttons
Remote ......................................4,6
TV ...............................................28
W
Warning...........................................i
Watching Closed Captioning.....26
Watching Picture-in-Picture .24,25
©1995 Thomson Consumer Electronics, Inc.
Trademark(s)® Registered
Marca(s) Registrada(s)
Printed in the USA
10330 North Meridian Street
Indianapolis, IN 46290
COUNTRY OF ORIGIN:
USA
100%
Recycled Paper
Minimum 50% Post Consumer
EXPORTED BY:
Loading...