RCA 25260 Quick Start Guide

Intercom, Page

Directory, Caller ID

Delete, Privacy

DND, Exit

To choose a soft key option, press the button directly under that part of the screen.

25260

Intercom

Directory

Delete

Page

Caller ID

Privacy

Wirelessly connecting your 25260 to another RCA phone:

If you have a 25255RE2 or 25270RE3:

If you have a 25210RE1, 25250RE1, 25212 or 25252:

If you are wirelessly connecting to another 25260:

First, make sure your 25260 is in

EXT/WIRELESS mode by going into the SELECT MODE menu and choosing EXT/WIRELESS. Your phone will switch

over to wireless mode and will be ready to register to another wired RCA phone.

When your 25260 is in EXT/WIRELESS mode, there’s no need for a phone jack! It connects to your phone system wirelessly.

When you are ready to begin pairing your phones, press the REG soft key.

NOTE : Before you begin pairing your phones together, you may wish to set them up in the same room. This will make accessing both phones easier. But don’t worry, you can unplug and move either phone afterwards.

SELECT MODE MAIN/WIRED =>EXT/WIRELESS

BACK

PRESS “REG” TO INITIATE REGISTRATION

REG

REGISTERING

SELECT

While your 25260 display says “REGISTERING…” press and hold the

PAGE button on your 25255RE2 or 25270RE3 desk phone for 5 seconds.

Your phones will automatically detect each other and be ready to use in seconds!

If registration was successful, the LCD on the base phone will read

REGISTRATION COMPLETE!

If registration fails, try moving the phones closer together and try again.

While your 25260 display says “REGISTERING…” press and hold the

PAGE button on your 25210RE1, 25250RE1, 25212 or 25252 base for

2 seconds. Your phones will automatically detect each other and be ready to use in seconds!

If registration was successful, the LCD on the base phone will read

REGISTRATION COMPLETE!

If registration fails, try moving the phones closer together and try again.

While your 25260 display says “REGISTERING…” press and hold the

PAGE MAIN button on the 25260 for 5 seconds. Your phones will

automatically detect each other and be ready to use in seconds!

Vol+

Vol-

NOTE: To connect two 25260 phones wirelessly, one of them must be operating in MAIN/WIRED mode and be connected to a phone jack.

If registration was successful, the LCD on the base phone will read

REGISTRATION COMPLETE!

If registration fails, try moving the phones closer together and try again.