RCA 25252 Quick Start Guide

1. To set up your Answering System,

press the MENU soft key.

2. Using the VOL (+/-) buttons

to navigate, scroll to

ANSWERING SYS. and press

the SELECT soft key.
MAIN MENU

PHONE SETTING
DISPLAY SETTING
SOUND SETTING
ANSWERING SYS.

3. Press the SELECT soft key again on ON/OFF STATUS.

4. Choose the line on which you would like to activate or deactivate the

answering system.

NOTE: The answering system may be activated on both lines at the same time.

5. Scroll to ON or OFF to activate or deactivate your answering system

on this line, then press the SELECT soft key.

6. From the ANSWERING SYS. menu, scroll down to OGA RECORD using

the VOL (+/-) buttons to navigate and press the SELECT soft key.
ANSWERING SYS.

ON/OFF STATUS
OGA PLAYBACK
OGA RECORD

7. Choose which line you would like to record a greeting for and press the

25252

SELECT soft key.

8. Choose which type of greeting you would like to record. Press the
SELECT soft key and record your message. Press the FINISH soft key to

end the recording and your message will be played back to you.

9. From the ANSWERING SYS. menu, scroll down to SET OGA and press

the SELECT soft key.
ANSWERING SYS.

ON/OFF STATUS
OGA PLAYBACK
OGA RECORD
SET OGA

10. Scroll to the greeting you wish to use and press the SELECT soft key.

NOTE: DEFAULT is the initial OGA setting. ANNOUNCE ONLY will play a message,
but not allow the caller to leave a message. TIMED will allow you to set two
different greetings, one for office hours and one for after your business has closed.

Additional features for the answering system can be found in the manual
starting on page 20.

quick start guide