RCA 2131-1BKGA, 2131-2BKGA, 2131-4BKGA, 2131-3BKGA User's Guide

DECT

Multi-Handset

Speakerphone User's

Guide

Please read this manual before

product for the first

Visit the RCA web site at

time.

www.r

Model 2131 / 2131-2 / 2131-3 / 2131-4

6.0
Cor

operating

ca4phones.com

dless

Equipment Approval Information

Your telephone equipment is approved
S

witched Telephone Network
FCC Rules
T

erminal Equipment published

1

On
information,
the
telephone
The REN is useful in determining
your
telephone number is called.
of all
the
REN,
A
and
and
modular
to a
instructions

Notes

•

•

Party

•

•

If your

and Regulations

Notification

the bottom of this

equipment . You

telephone line
devices connected

number

you

plug and

telephone network
requirements adopted

compatible modular jack

This equipment may

telephone
able

Check

Notice

disconnection
telephone line, ensure

your
alarm
installer.

to the

the

US

number

company.

should

plug

lines

to

with your
must be

home has specially

alarm equipment

equipment ,

must,

and

of

devices

contact your

jack used

is provided

for details.

company.

are

subject

use

your own

given

of your

US Number is located on
REN Number is located on

and

and the Technical R

Local Telephone

equipment is a label indicating,

and

upon r

still have

In most

to

one line should

you may

to

connect
must comply with the

by the

with this

that

not be

to state

telephone equipment

local telephone

to the

telephone
the

. If you

consult

your

for

connection

is

in

compliance

by ACTA.

Company

Ringer Equivalence Number
equest,

provide

the

number

all of

these devices

(but

not

connect

local telephone

used

telephone

wired alarm

installation

to your

this

equipment

ACTA. A
product
is also

compliant. See

on

coin service provided

tariffs,

company.

from your line.

have questions

telephone

the

the

with parts 15 and 68,

equirements

among other

this information to your

of

devices

ring

all) areas,

not

exceed 5. To

line as determined

company.

to the

applicable

compliant telephone

. It

is designed

and

therefore,

if you are on a party line.

company upon permanent

equipment connected

of this product

about what will disable

company or a qualified

cabinet

bottom.

cabinet

bottom.

to the Public

for Telephone

(REN)

you may
the

premises

connect

when

your

sum

of the

be

certain

wiring

FCC

Part

68 rules

cord and

to be connected

installation

by the

you may not be

to the

does

not disable

for

to

RENs

of

by the

2

Rights of

Should
telephone
you that temporary
prior
the
In
(1)

promptly notify you of
opportunity to correct the
bring a
S

ubpart E of
The telephone
facilities,
required
Rules
are
equipment ,
writing,

Int

This device complies
to the
interference;
including interference
This equipment has been tested
Class B
designed
residential installation. This equipment generates, uses,
radio
the
However, there
particular installation.
Privacy
this
reception,
the
the

•

Reorient

the

Telephone

your

equipment cause trouble

netw

ork, the

notice is

telephone

case

of

such

complaint

equipment,

in the

and

Regulations.

expected

to allow you to maintain

erfer

following

digital

to

frequency energy and,

instructions,

of

Communications

equipment does cause

which can be
user is encouraged
following

radio or

discontinuance

not

practicable

company may temporarily

temporary

to the

Part 68,

FCC Rules

company may

operations

operation

to affect the

the

telephone

ence Information

with

two

conditions:

and

(2) This device must accept

device, pursuant

provide reasonable protection against

may

cause

is

no

guarantee

measures:

or

relocate

television

Company

telephone

discontinuance,

such

situation;

Commission pursuant

of its

If

these

use
company must

Part

that may

harmful

may not be

harmful

determined

to try to correct the

the

receiving antenna (that is,

that

is “receiving”

on your

line

company

of

and the

if not

service

circumstances

temporary discontinuance; (2) afford you the

and

(3)

and Regulations.

make changes

or

procedures where such

business
or

15 of the

and not

changes

performance

uninterrupted

FCC Rules.

(1) This device may

cause undesired
and found to comply with the

to

Part

15 of the

installed

interference

that

interference

ensured when using

interference

by turning the

the interference).

which may harm the

shall, where practicable, notif

may be

discontinue service

the

inform you of your right to

give

and

interference

warrant

telephone

to

procedures set

in its communications

inconsistent

of your telephone

you

adequate notice,

service.

Operation is

not

any

interference received,

operation.

FCC Rules. These limits are

harmful

used

in

to radio communications.

will not

to radio or television

equipment

the

required.

cause

Where

such

immediately.

company must:

forth in

action is

with

FCC

subject

harmful

limits

interference in a

and can radiate

accordance

occur

in a

this

product. If

off and on,

by

one

or more of

antenna

for

y

action,

in

for a

with

•

Reorient

•

If

these measures
your
suggestions. Also, the
a

helpful booklet, “How To
Problems.” This booklet is available
Office, Washington,
000-0034

or

relocate

and

increase

the

telecommunications equipment

Connect

the

different

dealer

Notice: The changes or modifications not expressly
by the party
authority

telecommunications equipment

from that to which the

do not

or an

5-4

when ordering

to

eliminate

experienced radio/television technician

Federal Communications Commission has

Identify and

D.C.

20402. Please specify stock number
copies.

responsible for compliance could void

operate

the

equipment

separation between

and

receiving

receiving antenna is

the

interference, please

Resolve Radio/TV

from the

.

antenna.

into an outlet on a circuit

U.S.

Government

Interference

the

connected.

consult

for additional

prepared

Printing

004-

approved

the

user

’s

Hearing Aid Compatibility (HAC)

This telephone system meets

FCC RF Radiation Exposure Stat

This equipment complies
for an

uncontrolled
operated
and your
conjunction
For
exposure guidelines when used
. Use
exposure

with a minimum
body. This

body worn

of other

guidelines.

envir

transmitter must not be

with any other

operation,

accessories

Information for DECT Pr

This telephone is compliant with
which

operates
range. Installation
notification and
Any relocation
through and
UTAM

may be

in the

of this

coordination

of this

approved

contacted

FCC

standards

with

FCC RF

onment .

This equipment should

distance

this
may not

of 20

antenna

or

phone has been tested

with the belt clip

ensure compliance

oduct

the

1.92GHz
equipment is subject

equipment

by UTAM.

at

DECT 6.0

to

1.93GHz

with UTAM.

must be coordinated

1-800-42

for

Hearing Aid

Compatibility.

ement

radiation exposure limits set for

centimeters between

co-located

transmitter.

standard

frequency

to

9-8826.

and

supplied

with

be

installed

or

operated

meets
with this

FCC RF

the radiator

the

th

and
in

FCC RF

product

T

able of Cont

Equipment Approval
Interference
Hearing Aid Compatibility
FCC RF

Radiation Exposure Statement

............................................................................4

Information
Table

of

Contents........................................5

Intr

oduction..................................................7

Before You

Telephone Jack Requirements.............8

Installation.....................................................8

Digital Security System.............................8

Important

Base layout ....................................................9

Handset layout
Installation
Fit

handset .........................................................1

Connecting
Telephone
S

witching

Keypad lock.................................................13

To unlock
Charge/in use Indicator
Set
Speakerphone

Making a Call.............................................14

Answering a call.......................................14

Call
Auto St

Flash..............................................................14

Last Number

Exit .................................................................15

Paging

Mute..............................................................15

Begin.......................................7

Installation

and Set-up...........................12

the

rechargeable batteries

AC (electrical)

Operations.............................12

on/off

the key

time and

Timer

.....................................................14

andby.............................................14

the

handset ...............................15

ents

Information........2 Receiver Volume Control

Information.......................3 Phonebook

for

DECT Product ..............4

..........................................10

........................................12

pad……………...

date....................................13

Operation...................13

Redial...............................14

(HA

C)..........4

Guidelines.......9

in

each

power.......12

Base...

...13

....13

on

2

R

eviewing phonebook
Adding phonebook

Inserting a Pause................................17

Editing a

Deleting a phonebook record.......17

Deleting
Dialing a phonebook

Using

Last number redial
Save a redial number
phonebook

Delete a redial number....................18

Delete

Call Waiting Caller ID.......................18

Caller list
Access
Calling back a caller
Storing a
Deleting a caller recor
Deleting

Multi-handset

Making
Answering
Transfer
Making conference call (three-wa
conver

Programming
Personal
Handset
Ring
Ring melody

Key Beep...............................................22

Handset

Auto answer
Auto

............................................15

phonebook record..........17

all

phonebook recor

the

redial

...........................................18

the

redial list .........................18

................................................19

the

Caller list

caller record.....................19

all

caller recor

capabilities……..20

an

intercom call.................20

an

intercom call..........20

an

external

sation).......................................20

Functions...................21

setting.................................21

tone......................................21

volume....................................21

.........................................22

Name...................................22

.........................................23

hang-up

......................................23

................15

records..16

entries........16

number

list

...........................18

............................18

into the

........................19

..........................19

d..................19

d................1

call................20

ds....17

........17

9

y

Language...........................................23

Base

tone............................................23

Base Ring Volume............................24

Base Ring melody............................24

Advanced Set
Recall

Registration.........................................24

De-register

....................................24 Battery Safety Precautions

time...........................................24 Troubleshooting......................................27

the

handset

................25

Modify

master

R

eset ..........................................................25

Default settings list .............................26

Changing

Warranty

Limited Warranty

PIN...............................25

the Battery

Assistance............................30

....................................31

...........................26

..............27

Industry

This

product
Le présent materiel est conforme
d'Industrie

The Ringer Equivalence Number is
of

terminals allowed
termination on an
subject
Numbers

L'indice d'équivalence
maximal
téléphonique. La terminaison d'une interface
combinaison quelconque
d'indices d'équivalence

5.''
This Class B
Cet appareil numérique
du Canada.

IMPORTANT

When using
always be
persons, including

-Do

not
washbowl, kitchen sink
swimming

-Avoid using a telephone (other
storm. There

-Do

not

-Use
dispose
possible special disposal
SAVE THESE

Intr

CAUTION: When using telephone

safety instructions

IMPORTANT

Canada (I.

meets

the

Canada.”

only to the

of all the

de

interface

requirement
devices does

terminaux

digital

apparatus complies

SAFETY

your

telephone

followed

use

use

only the power cord and

of

batteries

to

the following:

this product

pool.

may be a

the

telephone

in a

INSTRUCTIONS

C.) Notice

applicable Industry Canada technical specifications.

to be

de la

qui

de la

de la

aux

specifications techniques

an

connected

may

sonnerie

peuvent

de

indication
to a

consist

of any

that the

sum

not

exceed

(IES)

être

raccordés à une

dispositifs,
sonnerie

classe B est conforme

à la

de tous

with

of the

telephone interface.

five.

sert à indiquer

peut

seule condition que

Canadian

maximum

combination

of the

Ringer

Equivalence

le nombre

interface

consister

les dispositifs n'excède

ICES-003.

à la

norme

of devices

en une

INSTRUCTIONS

equipment, basic safety precautions

reduce

the

risk

of

fire, electric shock

near

water for

or laundry tub, in a wet

remote risk

to report a

batteries indicated

fire. They

instructions.

than a

of

electric shock

gas leak

may

example, near

cordless type)

explode. Check

basement

in the vicinity of the

in this

and injury to

a bathtub

or

near

during an electrical

from lightning.

manual. Do

with

local codes

oduction

that

SAFETY

should always be followed. Refer

INSTRUCTIONS provided with this

equipment, there

are basic

product

applicables

number

The

la somme

pas

NMB-003

should

,

a

leak.

not

for

to the

and save them for future

IMP

ORT

ANT:
you should have
cordless, in case

Before You

Parts Checklist (for 2131 single handset

Make sure

Because cordless phones operate on

Begin

your

package includes

reference.

at

least one phone in your home

the

power in your home goes

the

model)

items listed

out

here.

electricity,
that isn’t
.

For

Model 2131-2

battery

cover
adaptor.
For

Model 2131-3

battery

covers
adaptor

s..
For

Model 2131-4

battery

covers
adaptors.

Telephone Jack Requirements

To use

this

installed

in your home.
If you don‟t
how to get

there will be

and two

there will be

and four

there will be

and

six additional pieces

phone,

you

have a modular jack, call your

one

installed.

ONE

additional pieces

additional pieces

need

additional handset,

TWO

additional handsets, charge

THREE

an

RJ11C

charge

of battery

of battery

additional handsets, charge

of battery

cells

cells

cells

cradle,

and power

and power

and power

type

modular telephone

local phone

jack

company to find out

cradles,

cradles,

Installation

Digital Security System

Your cordless phone uses
ringing, unauthorized access,

INSTALLATION NOTE:
frequencies
TVs, microwave ovens, and
interference,
placed near or on top of a TV, microwave ovens, or
interference continues, move
away

Certain other communications devices
DECT
these devices
telephone.
to the
channels
the
audio/video senders, wireless computer networks,
handset cordless telephone systems, and some
cordless telephone

that may

from these

frequency for communication, and,

If

owner’s manual for these devices on how

to

avoid interference. Typical devices

1.9GHz DECT

a digital

security system

and

charges

to your

Some cordless telephones operate

cause or receive interference with

the

base of

appliances.

may

you

are

frequency for communication include

VCRs. To

the

interfere with each other

concerned with interference, please

systems.

minimize or prevent

cordless telephone should not

the

cordless telephone

may

also use

if

not properly set

to protect

phone

line.

VCR.

farther

the

and/or

your

to

properly

that may use

multi-

long-range

against

at

nearby

such

be

If such

1.9GHz
,

new

refer

set

wir

eless

false

Impor

•

•

•

•

•

•

•

tant Installation Guidelines

Avoid sources

microwave ovens, heating appliances
Avoid areas
Avoid
Never install telephone
Never install telephone jacks

specifically designed
Never

telephone line has been disconnected
Use

caution

of

noise

and

of

excessive

other

cordless telephones

touch

non-insulated telephone wires

when installing

wiring during a

for wet locations.

heat,

such as motors, fluorescent

dust,

in wet

or modifying

and direct

moisture

or

personal

locations unless

and low temperature.

lightning

at the

telephone

sunlight .

computers.

storm.

the

jack

or

terminals, unless

network

interface.

lines.

lighting,

is

the

Base layout

Handset

Installation and Set

Fit

1) Install the

2)

Connecting AC (electrical)

Plug
the power
60Hz electrical
Before
charge
Leave
The
battery.
If you think that the symbol
first
If
normal for the
fault .

Base
adaptor

Telephone

Switching

Press
the
**

layout

-up

the

rechargeable batteries in each

AAA
550mAh,
into handset in
compar
Close

the battery compartment

firmly to

batteries (Brand name:

or Brand name: SANIK , Capacity:

accordance

tment .

make sure

it

is

with the polarity marked in the batter

secure.

cover,

CORUN, C

sliding

power

the

base power

jack

you

use

the

batteries

the

handset

battery

check

you‟re sure

that the

CAUTION: Use only
Using other po wer supplies

adaptor type

is IA1560, USA plug,

adaptor (Type: IA5060 120 Vac/6Vdc/500mA) cord into

on rear

panel

of the

base

outlet .

the

cordless handset

on the

charge

symbol will

handset is

that it

mains

is IA5060, USA

fully.

charging cradle

is, remove

adaptor to

the

blink when

isn't showing

correctly

and refit the

power supply

120V

and the other

for the first

for 16

you're

the correct battery

positioned

become

may

plug, 120Vac/6Vdc/500mA;
ac/6V

batteries. Please

warm this

that

damage

came with this

the

dc/150mA.

Operations

on/off

and hold the

handset

You

can switch the

Notes: When
calls including emergency calls. There will be no ringing
an

incoming call. To answer a call, you will need

in

idle

the

HANG-UP

mode.

key for more than 2

handset

off and

handset is OFF,

save

battery charge.

it

cannot be used for

handset

it into

time, it‟s
hours.

charging

in the

doesn't indicate

unit

seconds

apacity: Ni-MH 1.2V/

Ni-MH 1.2V/550mAh)

place

and pressing

end

into a 120Vac

important to

an empty

charge

charging

.

to

cradle.

note that it's

unit

Charge

to switch on/off

making

during

switch

it

y

level,

a

.

back on.
radio link with

Keypad

To lock
Press
the

keypad lock is activated, shows

To unlock

Press
simply

Charge/in use Indicator on

The

charge/in
incoming call,
charging

IMP
Indicator (VMWI) feature, you must subscribe
from your phone

Set time and

Note:
date will be set automatically when you receive

1.

Press MENU/OK

2.

Press
press MENU/OK

3.

The display shows 00:00 01/01, enter
press MENU/OK

Speakerphone

NOTE:
handset so

To switch
button.
When
display.

It may

take some time for

the

base

lock

the

cordless handset‟s

and hold [*] button for 2

the keypad:

and hold [*] button for 2

replace

the

handset

on the

or

ORT

when

ANT: In

use indicator
the

indicator
the

line is

order

to

company.

on the

will

in use.

date

If

you subscribe

the

Navigation

key to
key to
key to

to the

enter

(or)

select .
confirm. A

Operation

If

you

are

using

the party

the

speakerphone

the

speakerphone is on,

the

you

unit

.

keypad:

seconds

until you

on the display.

seconds

until you

charger

Base

base

will

remain

lit

use this unit’s Visual Message

Caller Display service,

main menu.
button to

confirmation

speakerphone, remain close

are

speaking

on or off

the

speaker

during a call,

the

handset

cradle.

flash

when a handset is

select

the current date and

symbol

to

re-establish

hear a beep tone,

hear a beep tone.

to alert you to an

to

this

a call.

Set Date/Time

beep is

to

can hear

press

the TALK/SPEAKER

appears

the

you.

when

Or

in the base

Waiting

service

time

and

and then

time,

played.

to

on handset

a

then

Press

the

earpiece mode. Press

Making

1.

­Dial

­Press
TALK/SPEAKER

2.

Answering

1.

2.

Call

After
timer
of the call in

Auto Standby

If you
(during a call),

TALK/SPEAKER

a Call

Press

the

OR -

the

OR -

When finished, press

NOTE: You
NOTE:

press

TALK/SPEAKER

number

first,

the

Navigation

button.

may

If

you want

the

BACK/R/C button until

a call

Pick

up the

When finished, press

NOTE: Adjust
button during

handset

Timer

you

press

shows

place

the
on the
minutes

the

handset

the call

the

a call.

TALK/SPEAKER
display

Flash

Press

the

provided

BACK/R/C

by

telephone

Last Number Redial

You

may

number

1.

redial a number

you dialed:

Press

the

TALK/SPEAKER

button

again

the

HANG UP

button.

press the TALK/SPEAKER

(or )

the

HANG UP

enter up

to

delete

to switch from

button to

Dial

the

button to

to 24

select

button to

pre-dial

the

pre-dial number you

all

of

and

press

the

the

HANG UP

handset volume

after 20

and seconds.

in the

is

automatically disconnected.

button to

company.

TALK/SPEAKER

button on the

seconds

cradle while

access line

button to

by

pressing

the

transfer

up to 13

digits long. To

button.

speakerphone

end

conversation.

desired

number.

button.

the

desired record, press

end

conversation.

digits.

the

digits

are erased.

button.

end

conversation.

the

Navigation

handset ,

and

counts

handset is

offered

quickly

to

entered,

the built-in call

the

length

of time

off the hook

by call waiting

redial

the last

the

2.

Press

the

redial

-OR-

3.

Press

the

the

desired redial

-

Press

the

most

-

Press

(lower

4.
If you get a busy
redial

Navigation

recent calls (higher

the

Navigation

number

NOTE: You
dialed.

Press

the

button to quickly

button.

redial

button first , then

number.

()

to

number

()

choose from

signal

and want to

redial

to

s).

may

TALK/SPEAKER

review

s).

review

the

button.

the

number.

the
the

use

the

Navigation

oldest

call and

newest

call and

last

ten

numbers

The number dials
keep dialing

the

button to select

scroll

toward the

scroll

to

that were

automatically.

number,

press

older

the

Exit

Press

the

standby mode.

Paging

This feature allows
on the
press

BACK/R/C

the handset

base unit , handsets

the

FIND

button to exit a

you to find a

button

again

menu

function and return to the

misplaced handset . Press

ring for up to 30

or

press

seconds. To

any button on any

the

FIND

stop the page,

cordless

button

handset .

Mute

During

a call you can switch

hold.

1.

Enable MUTE
the

display shows Mute

2.

Disable MUTE
the call.

function: Press

function: Press

Receiver Volume

When

the
by
from. When
beeps twice. Volume 1 is

handset is ON (in

pressing

the

Navigation

the

maximum

OFF

On.

Control

talk
button.

or minimum

minimum and

the

microphone. The

the

MENU/OK/mute

the

MENU/OK/mute

mode)

you may

There

are

three volume levels
volume level is reached,
Volume 3 is

call

is placed

button during a call,

button to continue

adjust

the

receiver

maximum.

on

volume

to choose

the phone

Phone Book

You

can

store

up to fifty

records

in

phone book

for

quick dialing;

each

calls

record
names.

can contain a

maximum

Reviewing phonebook

1.

2.

3.

4.

Make sure
Press
shown
Press
records.
Press

the

phone is OFF (not

the

Phonebook

in

alphabetical or

the

Navigation

the

MENU/OK

Adding phonebook

1.

Press MENU/OK

2.

Press

the

press MENU/OK

3.

Use

the

4.

Press

the

display.

5.

Use

the touch-tone pad to

than

one
For example,
Press

the 4 key 3

Press

the 5 key 3
second
and last
once

for the letter

8 key for the letter

NOTE: 1)
backspace and erase
Use

the

and lower case text

6.

Press

the

shows ENTER

7.

Use

the touch-tone pad to

including pauses),

Melody. “Melody

8.

Press

the

10

(a testing

key to

Navigation

key to

Navigation

MENU/OK

letter

is stored

to

enter Bill Smith, press

times

letter

#/Pause/Ringer button

times

L,

and

name. Press

If

MENU/OK

Navigation

M; press

you make a mistake press

NUMBER.

and

5”

tone

is generated while making

of 20-digit

records

button to

der.

(or)

button or key in

button to

entries

enter

main menu.

(or)

button to

enter Phonebook

(or)

button to

button to

enter a name (up

in

each

for the letter I.
for the letter

press

the 1 key to

the 7 key 4

the 4 key 3

T; press the

the

wrong character(s) or number(s).

entry.

button

again

enter

press

the

shows

on the display.

(or)

button to

numbers

in

TALK/SPEAKER

access

the

phone book, all

view detail

information.

select

sub-menu.

scroll

confirm,

of the

times

4 key twice for the letter H.

to

to

the

MENU/OK

to

ENTER NAME

to 10

number

the 2 key twice for the letter

L. Press

insert a space between

for the letter
times

the

BACK/R/C button

toggle between upper

save

your

telephone number (up

button to

select

melody

and 10-character

mode).

alphabet

Phonebook

New

keys.

the 5 key 3

for the letter

selection. The

from melody 1 to melody

records

to the desired

and then

Entry.

shows

on the

characters).

times

S; press

I; press

case

to 20 digits,

confirm.

selection),

are

More

B.

for the
the first

the 6 key

the

to

2)

display

Select

press

the

MENU/OK

in the

Inserting a P

Press

the
a delay in
(for example,
access tone) Each pause counts as one

Editing a phonebook

From Phonebook Sub-Menu:

1.

Press

2.

Press

3.

Repeat Steps

Deleting a phonebook

From phone book

1.

Press

2.

Press
alphabetical or

3.

Press
records.

4.

Press

NOTE:
press
automatically.

Deleting all phonebook

From phone book

1.

Press

2.

Press

3.

Press

Dialing a phonebook

1.

Make sure

2.

Press
shown

3.

Press

button to

phone book.

ause

#pause/ringer

dialing sequence when a pause is needed

after you dial 9 for an

confirm,

button on the

record

the

Navigation

the

MENU/OK

4 through 8 in

(or)

button to

button to confirm.

“Adding phonebook entries”

record

sub-menu:

the

Navigation

the

MENU/OK

the

Navigation

the

MENU/OK

If

you don’t want

the

HANG UP button, or

(or)

button to

der.

(or)

button to confirm.

to

button to

button or key in

change or delete a record,

records

sub-menu:

the

Navigation

the

MENU/OK

the

MENU/OK

(or)

button to
button, the
button to confirm the deletion.

number

the

phone is OFF (not

the

Phonebo

ok

in

alphabetical or

the

Navigation

button to

der.

(or)

button or key in

the

records

handset‟s

outside line,

digit in the

scroll

confirm,

scroll

all

records

wait

for one minute

scroll

screen displays

in

TALK/SPEAKER

access

the

are

stored

alphabetically

touch-tone pad to insert

to wait for a dial tone

or to wait for a computer

dialing

sequence.

to

Edit

Entry.

section.

to

Delete Entry.

are

alphabet

to

Delete
Confirm?

mode).

phone book, all

alphabet

shown

in

to the desired

simply

to exit

All.

records

to the desired

is

records.

4.

Press

the

TALK/SPEAKER

Using the r

The redial
can be

displayed

Last number

1.

Press REDIAL
redial list . The

2.

Press

edial list

list

stores

the last 10

for

each

entry.

redial

key in

idle mode

last

the

number dialed

TALK/SPEAKER

Save a redial number into

1.

Press REDIAL

2.

Press

3.

Press MENU/OK
to

display

characters) and then

4.

Press MENU/OK

Delete a redial

1.

Press REDIAL

2.

Press
MENU/OK

3.

Press
MENU/OK

Delete

1.

Press REDIAL

2.

Press

3.

Press
press MENU/OK key,

4.

Press MENU/OK

Call Waiting Caller

Provided
company;
handset system, a beep indicates

the

Navigation

Enter

the

Navigation

key.

the

Navigation

key to confirm.

the

redial

the

MENU/OK

the

Navigation

you

subscribe

if you

receive

key in

idle mode

(or)

key to

display

Name.

Enter

press MENU/OK

key to confirm and return to

number

key in

idle mode

(or)
(or)

list

key in

idle mode

key.

(or)

the

key

again

ID

to

Call Waiting Caller ID service

an

incoming

button, the

numbers dialed. A maximum

button to dial the

number dials

and

press Navigation

will

appear

first in the

number.

the phonebook

to go to the

button to

Copy

the

name

redial list

select

to

Phbk, then

of the contact

key to

display

redial

an entry.

to go to the

button to

button to

to go to the

button to

screen displays

to confirm.

call and you are

the

select
select

select

Delete All?

presence

redial list .

an entry and then press

Delete

redial list .

Delete All

of a

Call Waiting

automatically.

of 20 digits

key to

browse

redial list .

.

press MENU/OK

(maximum

Enter

Number,

list display.

and then press

and then

from your phone

using

the multi

call on the

the

key

10

20

line. The Call Waiting Caller ID
the history of all

Caller

1.

CLIP

2.

When

3. Store the last 20

Access

1.

Press
the

2.

Press

Calling back

1.

Press

2.

Press

3.

Press

Storing a caller

1.

Press

2.

Press

3.

Press

or

4.

Enter
enter number

5.

Press

6.

Press

7.

Press

Deleting a caller

1.

Press

2.

Press

3.

Press MENU/OK

4.

Select

Deleting all caller

1.

Press

2.

Press MENU/OK

handsets

list

of

incoming Calls

you

enter

the
incoming calls

the

Caller

list

the

CID

the

Navigation

button to

recent caller phone

a caller

the

CID

button to

the

Navigation

the

TALK/SPEAKER

record

the

CID

button to

the

Navigation

the

MENU/OK

)

button to

the

name

the

MENU/OK

the

Navigation

the

MENU/OK

button to

select

if you want to

entry.

button to confirm the
button to confirm.

record

the

CID

button to

the

Navigation

Delete, press MENU/OK

button to

record

the

CID

button to

button to

information will be

in the system.

are

stored

CALLER LIST

and the call time.

enter

the

number.

(or)

button through the

enter

the

(or)

button to

button to dial the

enter

the

(or)

button to

open sub-menu

Copy

to

change. Press

(or

 button to

enter

the

(or)

button to

open

sub-menu.

button to confirm your deletion.

enter

the

open

sub-menu.

displayed

in the

CALLER LIST

menu,

the

display shows

Caller List menu. The display

Caller List

Caller List

Phbk.

Caller List

Caller List

menu.

select

number.

menu.

select

number.

select

menu.

select

menu.

a call record.

a call record.

and

the

a melody.

a call record.

and

menu.

Caller List .

use

the

MENU/OK

stored

in

icon.

shows

Navigation (
button to

21

3.

Select

All?

4.

Press MENU/OK

Delete All

, press MENU/OK

button

again

to confirm your deletion.

button, the

screen displays

Delete

Using multi-handset capabilities

Note: To use intercom feature, you need
handsets link
up

to 4 handsets.

Making

1.

Make sure

2.

Press
registered handsets shows
you want to page.

3.

The cordless handset rings,
display. When

Answering

The ringing
someone makes
handset‟s display

1.

Press

2.

To end
handset

Transfer

You

can transfer an

the

base

1.

2.

3.

4.

station.
During
hold and the
Enter
When
Press

NOTE:
the

external call will come back

to

this product

an

intercom

the

phone is OFF (not

INT

button on

the

an

intercom

tune for

intercom calls is different

an

intercom

with the

the

TALK/SPEAKER

an

intercom call, press

in the

base

an

external

external

an

external call, press

registered handset shows

the

handset number

the

receiving handset answers,

the

HANG UP

If the

receiving handset does not answer with

call

handset ,

on the

handset user answers,

and the Int symbol

call

call to

number

button to

cradle.

call

call to another

you want to page.

button on the

.

This product is capable of link

in talk mode).

the Int symbol

you,

of the

the

the

INT

to

to

have

at

display, enter

answer.

HANG UP

original handset

appears

the

handset

flashes

you will be connected.

from

Int

handset calling

button, the

you and your handset

external calls.

icon appears

button or

handset

that

on the display,

you can

external

announce

to transfer the call.

least

2

ing

and the

number

on handset

When

on your cordless

you.

place

the

is registered

call

is

put on

the call.

30 seconds

will

to

,

22

rings. You can press
external call

again.

the

TALK/ SPEAKER

button

to

take

the

Making conference call (three-way

You

can

connect one external
station.
All users

can

1.

During
call
enter

2. Wait until the internal

3.

Press
conference

4.

When finished, press

Pr

ogramming Functions

The system uses a menu structure
features. You

Set Date/Time, Personal Set and Advanced Set

Personal

1.

Make sure

2.

Press

3.

Press

4.

Press

Handset

From Personal Set

1.

Press

2.

Press
program the follow

Ri

ng

From Handset Tones setting

1.

Press

2.

Press

3.

Press

TALK/SPEAKER

an

external call, press

is

put on hold and the

the

handset number

and hold the

call.

may program the

setting

the

phone is OFF (not

the

MENU/OK

the

Navigation

the

MENU/OK

tone

the

Navigation

the

MENU/OK

volume

the

Navigation

the

MENU/OK

the

Navigation

sub-menu:

call to two

and

listen

the

registered handset shows

you want to page.

user answers.

INT

button on

the

HANG UP

to

following items

button to go to main menu.

(or)

button to

(or)

button to

items:

(or)

button to

(or)

in

button to

access

button to

access handset

Ring Volume, Ring Melody, Key

sub-menu:

button to

enter

button to

conversation)

handsets registered

simultaneously.

INT

button on

original handset

button to

give

TALK/SPEAKER

the menu.

you

select

the

select

select
select

access

in main

setting

end

.

Personal

Handset Tones.

tone

Ring

the

at the base

handset ,

the external

on the display,

to start a three-way

the conversation.

to all of the built-in

menu:

Phonebook

mode).

Set

setting,

Volume.

ringer

.

you may

Beep.

sub-menu.

desired

,

23

volume level (High, Medium,

4.

Press

the

confirmation tone.

NOTE:

Ring

You

may

From Handset Tones setting

1.

Press

2.

Press

3.

Press
tone.

4.

Press
confirmation tone.

Key

From Handset Tones setting

1. Press

2. Press

3. Press

4. Press

MENU/OK

If

you select Silence, Ringer off icon shows on

melody

choose

from ten

the

Navigation

the

MENU/OK

the

Navigation

the

MENU/OK

Beep

the

Navigation

the

MENU/OK

the

Navigation

the

MENU/OK

(or)

button to

(or)

button to

Low, Silence)

button to

(or)

button to

(or)

button to

save

different melody

sub-menu:

button to

enter

button to

save

sub-menu:

button to

enter

button to

confirm. You

your

selection. You

ring tones.

select

the menu.

select

your

selection. You

select

the menu.

select

will

will

the display.

Ring

Melody.

the

desired

will

Key

Beep.

On or

Off.

hear

a confirmation tone.

hear

a

melody ring

hear

a

Handset Name

From

the

1.

2.

3.

Personal Set

Press

the
sub-menu.
Press
Use
than
enter Bill Smith, press
times
5 key 3
space between
letter
the letter
letter H.

NOTE: 1)

Navigation

the

MENU/OK

the touch tone pad to

one

letter

for the letter

times

S; press the

I; press

If

sub-menu:

(or)

button to

button to

is stored

I. Press

for the

the first and last

6 key

the 8 key for the letter

you make a mistake, use

enter

enter a name (up

in

each

the 2 key twice for the letter

second

once

of the

the 5 key 3

letter

L,

name. Press

for the letter

scroll

to the

Handset

the menu.

to 10

number keys. For example,

times

and

T; press the

the

characters).

B. Press

for the letter

press

the 1 key to

the 7 key 4

M; press

the 4 key 3 times for

4 key twice for the

BACK/R/C

L. Press
times

button

Name

More

the 4 key 3

the

insert

for the

to

a

24

to

backspace and delete one character
#/Pause/ringer button
case text

4.

Press
confirmation tone and the

Auto

From

1.

Press
menu.

2.

Press

3.

Press

4.

Press
tone.
to
call,

Auto

This

function

handset

From

1.

Press
sub-menu.

2.

Press

3.

Press

4.

Press
tone.

entry.

the

MENU/OK

answer

the

Personal Set

the

Navigation

the

MENU/OK

the

Navigation

the

MENU/OK

If you

answer

a call

put the

hang-up

enables

on the

the

Personal Set

the

Navigation

the

MENU/OK

the

Navigation

the

MENU/OK

button to

sub-menu:

(or)

button to

(or)

button to

select ON,

immediately

handset back

you to

base station.

sub-menu:

(or)

button to

(or)

button to

Language

From

the

1.

2.

3.

4.

Personal Set

Press

the
menu.
Press

the
Press

the
Press

the
confirmation tone.

Navigation
MENU/OK

Navigation
MENU/OK

sub-menu:

(or)

button to

(or)

button to confirm your

at a

to

toggle between upper case and

save

your

handset name shows

button to

enter

the menu.

button to

confirm. You

during an

external call,

without

on the

cradle

end

a call automatically by simply

By

default ,

the

button to

enter

the menu.

button to

confirm. You

button to

enter language

button to

time. 2) Use

name. You

scroll

to the

select

On or

will

hear

you may lift the handset

pressing

any

directly.

Auto Hang

scroll

to the

select

On or

will

hear

scroll

to the

setting.

select

the

selection. You

the

lower

will

hear

in the display.

buttons,

up

desired

a

Auto Answer

Off.

a confirmation

to

placing

feature is

Auto

Hang-up

Off.

a confirmation

Language

language.
will

end

Off.

sub-

hear

sub-

a

the

a

25

Base

tone

From Personal setting

1.

Press

the

2.

Press
program the follow

Navigation

the

MENU/OK

Base Ring V

From Base Tone setting

1.

Press

the

2.

Press

3.

Press
volume level (Ring Vol High, Ring Vol Medium, Ring Vol

4.

Press
confirmation tone.

NOTE:

Base Ring

You

may

From Base Tone setting

1.

Press

2.

Press

3.

Press
tone.

4.

Press
confirmation tone.

Adv

1.

Make sure

2.

Press

3.

Press

4.

Press

Recall

From

1.

Press

2.

Press

3.

Press

Navigation

the

MENU/OK

the

Navigation

the

MENU/OK

If

Silence is selected, you will turn off

melody

choose

the

Navigation

the

MENU/OK

the

Navigation

the

MENU/OK

anced Set

the

MENU/OK

the

Navigation

the

MENU/OK

time

the

advanced Set

the

Navigation

the

MENU/OK

the

Navigation

sub-menu:

(or)

button to

button to

items:

access base

BS Ring Volume, BS Ring

select

olume

sub-menu:

(or)

button to

(or)

button to

from

three different melodies

sub-menu:

(or)

button to

(or)

button to

the

phone is OFF (not

button to go to main menu.

(or)

button to

sub-menu:

(or)

button to

(or)

button to

enter

button to

save

button to

enter

button to

save

button to

access

button to

enter

button to

select

the menu.

select

your

select BS

the menu.

select

your

in

TALK/SPEAKER

select

the

scroll

the menu.

select Medium,

Base

Tone.

tone

setting,

Melody.

BS Ring

the

desired

selection. You

the

base

for

base unit .

Ring

the

desired

selection. You

mode).

Advanced

setting

menu.

to

Recall

you may

Vol.

ringer

Low,

Silence)

will

hear

ringer.

Mel.

melody ring

will

hear

Set

.

Time.

Short , Long.

a

a

26

4.

Press

the

R

egistration

From

1.

Press

2.

Press
will

3.

Use
code is

4.

Press

R

5.

Press

6.

You
enter

De-register

You

may

From

1.

Press

2.

Press
display

3.

Use
code is

4.

Enter

5.

You
successful. The screen display

Modify master

To avoid
change

From

1.

Press

2.

Press

3.

Use

4.

Press
enter

5.

Press

MENU/OK

the

Advanced Set

the

Navigation

the

MENU/OK

show

Enter

the touch tone pad to

the

egistering...

and hold the

will

the

PIN----.

0000).
MENU/OK

hear

a long confirmation tone if the

handset number

the handset

need

to do this in

the

Advanced Set

the

Navigation

the

MENU/OK

Enter

the touch tone pad to

will

PIN----.

0000).

the

handset number

hear

a long confirmation tone if the

PIN

your

handset setting

your

master PIN (default PIN number is

the

Advanced Set

the

Navigation

the

MENU/OK

the touch tone pad to

the

MENU/OK

the new

PIN code

the

MENU/OK

button to confirm.

sub-menu:

(or)

button to

button to

button to

FIND

sub-menu:

(or)

button to

sub-menu:

(or)

button, the
button, the
button to

access registration setting,

enter

the 4

confirm,

button on the

you want to arrange.

order

to

replace

button to

access de-register setting,

enter

the 4

to be de-registered.

Unregistered.

from

unintentional access,

button to

display

enter

your new

display

again.

confirm,

scroll

to the Registration.

digits

of

PIN code (default

the

screen

displays

base

for a few seconds.

registration is successful,

a faulty

handset .

scroll

to Unregister.

digits

of

PIN code (default

de-registration

0000).

scroll

will

show

PIN

will

show

you will

you should

to

Change

Enter New PIN

code.

Confirm PIN

hear

a confirmation

the display

PIN

the screen

PIN

is

PIN.

----.

----.

27

tone.

R

eset

As

you

become

s

original

Follow

From

the

1.

Press

2.

Press

3.

Use

4.

Press

5.

Press
default setting.

familiar with

settings.

the

steps below

Advanced set

the

Navigation

the

MENU/OK

the touch tone pad to

the

MENU/OK

the

MENU/OK

Default settings



Keypad:
















unlocked
Redial list:
Caller Display records:
Phonebook: empty
Earpiece volume: High; speakerphone volume:
Handset ringer volume: High; Melody:
Base
Handset Key tone:
Handset name: Handset
Language: Country depend
Auto
Auto Hang up:
Recall Time:
Master PIN:
Time & Date: 00:00

empty

unit

ringer volume: Low; Melody:

Answer: OFF

ON

Medium

0000

Changing the Battery

CAUTION: To reduce
the

approved Nickel-metal Hydride

compatible with this

1.

Make sure
battery.

the

telephone

this system, you may

to return to the factory default settings.

sub-menu:

(or)

button to

button, the
button, the

button

list

ON

01/01

enter

again

empty

1

on

screen displays

your four

screen displays

the

risk of fire or personal injury, use

unit

.

is

OFF

(not

prefer

scroll

to Reset

Enter PIN

digits

to

reset

5

3

battery

in

TALK mode) before you

Confirm Reset?

the

handset

2

(Ni-MH), which

of

to

.

PIN

use

the system‟

----.

code.

to factor

y

only

is

replace

28

2.

ALWAYS check

first

that:

You have followed

all the

steps listed

in the user

manual to

install

and

set

up your telephone.

All connectors

are firmly

inserted

in their sockets.

Main

power to the

base

unit

is switched

on at the

socket. The handset‟s batteries

are correctly and

securely installed

and are not run down.

Everyday

use

Remove

3.

4.

5.

6.

the battery compartment
Disconnect
battery

pack

Insert

the new battery

battery

compar

Put

the battery compartment door

Place handset

properly charge (for
new

battery

performance will be

Battery Safety

•

Do

not

burn, disassemble, mutilate,

this type, toxic

•

To reduce

Hydride

•

•

battery
Keep batteries
Remove batteries

the cord attached to the battery

from the

pack.

handset
pack

tment.

in the

base

16

hours) prior

If

you do not properly charge

compromised.

Precautions

materials could

the

risk

of fire or

listed

in the

out of the

reach

if

storing over

door.

.

and

connect

the cord to the

back

to

charge.

on.

Allow

the

to

first use or when you install

or

puncture. Like

be

released

personal injury, use

User‟s

Guide.

of children.

30 days.

pack

and

remove

jack inside

handset

which can

only the Nickel-metal

the

other

cause

battery to

phone,

batteries

the

battery

injury.

Troubleshooting

the

a

of

29

“I cannot

make

or

answer

calls”

If the

handset‟s display is

blank, it may have

been switched

off.

Press

and hold the

HANG-UP

key to switch it

back

on.

Check

that the

base unit‟s main

power adapter

is plugged

in and power

is switched

on.

The base

unit

needs main

power for normal

operation

of the

phone –

not just for charging
the batteries.
Make sure

you are

using

the

telephone line

cable

supplied

with your

phone. Other telephone

line

cables

might not w

ork.

Move

the

handset

closer

to the

base unit.

Check

the battery

level

symbol on the display.

If it

is

low,

replace

the

handset

on the

base

unit

or

charger

pod to

recharge

the batteries.

S

witch off power at the

main

socket , wait for

a short time and then switch

back on. This

may

solve

the problem.

“I cannot

make

a call”

If the

handset display shows

KEYS LOCKED,

press

and hold the * button to

unlock

it before

you

make

a call.

Only one handset (or

the

base unit)

can be

connected

to the

outside line

at a time.

If another

handset is

already

using

the

line,

you

need

to wait until it

has finished

its call.

“When I press

on

the

keys,

nothing

happens”

Make sure

the

batteries

are fitted in your

handset .

If the Battery

Level

symbol on the

display shows

„low‟,

put your

handset back

on

the

cradle

to charge.

“When

I key in a
number, it appears
on the

display,

but

I cannot

make

an

outside

call”

Try a different position

for the

base

unit –

somewhere higher

if

possible,

or further from

other

electrical

equipment

.

Try moving

the

handset closer

to the

base unit .

30

“The phone does

not

ring”

Check

that the

base unit‟s main

power adapter

is plugged

in and power

is switched

on.

The base

unit

needs main

power for normal

operation

of the

phone –

not just for charging
the batteries.
Make sure

you are

using

the

telephone line

cable

that

was supplied

with your package.

“My call

was

cut off

when

I went out of

range. Now

I can‟t

use

my

handset

.”

Move

the

handset closer

to the

base

unit before

you try

again

to

make

a call.

“There is

interference

and

noise

on the line”

Move

the

handset closer

to the

base unit , or to a

different

position.

Try moving

the

base

unit

so

that

it‟s

not near

other

electrical

equipment, such as

a television

or a

computer.

You‟ll

get the

best sound

if you

place

the base

unit

as

high

as possible. For example,

in a two-

story

house,

the first-floor

landing is

an ideal

place.

“I

hear „beeps‟

from

my

handset while

I‟m

on a call”

You

may be

going

out of

range

of the

base unit

.

Move closer

or your call may be cut off.

Check

the Battery

Level

symbol on the display.

If

it‟s

low,

recharge

the batteries.

31

“The Caller

Display

feature isn‟t

working”

In

order

to

utilize

the

Caller ID features

of this

phone,

you will

need

to

subscribe

to

Caller

ID

with your

telephone service provider. Please

contact your

telephone service provider

for
details.
The caller

may

have BLOCKED

their

number

or

the

caller

may be

calling

from a

network

that

does

not transmit the

Caller ID

data.

Allow

at

least 2 rings

for the

Caller ID

data to

display.

“When

I try to

make

a

call, I hear

busy tone”

If

you‟re using a multi-handset system,

check

whether

another

handset is

already on a call.

“The volume

in the

earpiece is

low when

I‟m on a call”

Make sure you‟re holding

the

earpiece

correctly

over

your

ear.

Adjust

the

volume using

the

navigation

key.

Intercom

and

transfer

“I can‟t

transfer

a call”

Make sure

the other

handset is

in

range

of the
base unit.
Make sure

you are

dialing

the

correct number fo

r

the other

handset

.

Battery

“The

handset‟s battery

pack is running

low
within an hour or
two”

Before

you first

use

the

handset ,

you should

have

left it on the

base

unit or

charger

pod for 16

hours

to

charge

the battery fully.

You

may

need

to

replace

the battery.

Check

the

connection between

the

base

unit and

the

main

power

socket.

32

“I try to

recharge
battery but I
warning that they are
low” punctured.

still

the

You need

get a

Dispose

of

them,

or put them

Do

not

use non-rechargeable
handset –
If the fault
instruments connected
to

make

a call.
Disconnect
and plug a
telephone
the

line is OK.
If the call
two-way
telephone
If the call now
If you cannot
the

exchange line. Contact

to

replace

used batteries safely – never

they may

persists... Disconnect

different phone

socket.

does
socket

directly into the

the battery.

where

explode, causing

the

base

unit from the

Try making a call.

not w

ork, and you are

adaptor,

works,

the adaptor may be faulty.

make a call,

they

could

battery in your

all other

to the

same line

telephone

into the master

remove

it and plug a

socket .

the fault may be on

the

service provider.

burn

get

damage.

and

If this works,

using

W

arranty Assistance

Your sales receipt
order

to

validate

the

original,

reference.
If this product

date of gift r
required

during the warranty

to the

telephone

disconnect
Purchase Date

Name of S

will be

required

to

your warranty

or a

photocopy,

was received as

eceipt, as

the

tore

this information will be

netw

ork, the

equipment

or

until the

Date Received as

demonstrate

eligibility. You

of your

sales receipt

a gift, it

is suggested

period.

If the

telephone

problem is

Gift

proof of

may want to attach either

valuable should service

equipment is causing

company may

resolved.

purchase

to this

booklet

you jot down the

require

that you

try

line

a

in

for future

be

harm

33

For instructions
Care

at

com. If you prefer, you may write to

S

upr

eme Power USA
PO Box
Indianapolis IN 46250-1045

Please
service
written communication

If the

equipment is causing
company may
problem is

Limited W

What

your limited warranty

•

Defects

For how long

•

One

that will act
status.

What

we will

•

Provide

same
remainder
the date the
longer.

How

to

•

Call Customer Care

you and
when calling us. The model number
the

If

you

are

service is

on how to obtain warranty

1-877-722-4908

501045

do not

send products

and may

require

resolved.

LLC

result

that you

or you may

in

lost

only.

harm to the

arranty

in

materials

after

year, from date of

or

get

underside

required:

your

as

your proof of

do:

you with a new or,

similar model. The exchange model is under

of the

replacement

service:

please have

of the

within your limited

covers:

or w

orkmanship.

purchase:

purchase. Please

at our

original product's one

product

at

1-877-722-4908.

your

base unit .

service,

visit

our

us

at:

to

this address as

or

damaged product

telephone

disconnect

purchase

model number

warranty

in

option, a refurbished exchange

was shipped

and date

period and

you may call Customer

website

it only

netw

the

equipment

retain your

order

to

year warranty, or 90 days from

to

Please have

and date

code

it

at www.rca4phones.

adds delays

.

This PO BOX is

ork, the telephone

until the

sales receipt ,

validate

warranty

warranty for the

you, whichever

your product with

code

available

can be found on

is determined that

for

as

unit of

is

in

34

•

We

will

ask
damage. We recommend
materials.

•

We



Your name,
handwritten or typed on a



A legible
sales receipt )

•

Ship

shipping
for
date shipped, carrier and tracking number here:

that you properly

will

ask

you to

return

copy of your

your product

your product via a

lost,

mis-directed

include

shipping address

prepaid,

pack

your product to

that you

with your product the following:

sales receipt ( please

or

damaged shipments. You

use

the

original

sheet

to the

and daytime

of paper

address

traceable carrier, as

do not

we

provide. We

avoid

carton and packing

phone

number

send

the original

we are not responsible

may want to write

•

Upon receipt

warranty and if
ship
same
cost .

What

your limited warranty

•

Customer Instruction. (Your Owner‟s Manual provides

regarding operating
may be

•

Installation

•

Batteries.

•

Damage

•

Products

products

•

Products

•

Products purchased

•

Acts

Limitation of

•

THIS LIMITED WARRANTY IS THE ONLY WARRANTY
THIS PRODUCT. ALL OTHER WARRANTIES,
(INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED.
VERBAL
LLC, ITS AGENTS, EMPLOYEES, RETAIL DEALERS OR
CONTRACTORS SHALL CREATE A GUARANTY OR

of your product we will

to you a new or,

or

of

nature, such as

determined

similar model. This exchange

obtained

OR WRITTEN INFORMATION GIVEN

by contacting the retailer)

and

set-

from

misuse,

which

have been modified

that

have been serviced

Warranty:

your product

at our

option, a refurbished exchange

does not cover:

and

install instructions. Additional

up

service

adjustments.

neglect ,

unauthorized repair.

or

serviced outside
but not limited to,

by an

validate

your product

is

warranty

unit will be

or

incorporated

unauthorized

the

shipped

USA

or Canada.

lightning

damage.

EXPRESS OR

BY SUPREME POWER USA

IN

eligible,

information

information

into other

ser

APPLICABLE TO

IMPLIED

INDEPENDENT
ANY WAY

shipping

suggest

is

under

we will

unit of

to you at no

vicer.

OR

the

NO

INCREASE THE SCOPE OF THIS WARRANTY.

•

REPAIR OR REPLACEMENT AS PROVIDED UNDER THI S WARRANTY

IS THE EXCLUSIVE REMEDY OF THE CONSUMER. SUPREME POWER
USA LLC SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE

OF THIS PRODUCT OR ARISING
OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARR ANTY
ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIES

AND
LIMITED WARRANTY ARE GOVERNED BY THE LAWS OF THE STA
OF INDIANA

EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE

LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS

TE

2131
Printed
10-35

Please do

manual

in China

Visit

the

send

RCA

any

not

or

on the carton. This will

web

site

products

at www.rca4phones.

to

the Indianapolis address listed in this

only

add delays in service

com

for your product.