Quick Set
-up Guide
for
Option
al/Additional
Model 2130
6.0
Cordless
for use
2131
Please read this manual before
product for the first
Visit the RCA web site at
with Systems
and 2132
time.
www.r
DECT
Handset
series
operating
ca4phones.com
Model
2130
2
Equipment Approval Information
Your telephone equipment is approved
S
witched Telephone Network
FCC Rules
T
erminal Equipment published
1
On
information,
the
telephone
The REN is useful in determining
your
telephone number is called.
of all
the
REN,
A
and
and
modular
to a
instructions
Notes
•
•
•
•
If your
and Regulations
Notification
the bottom of this
equipment. You
telephone line
devices connected
number
you
plug and
telephone network
requirements adopted
compatible modular jack
This equipment may
telephone
Party lines
able
Check
Notice
disconnection
telephone line, ensure
your alarm
alarm
installer.
to the
the
US
number
must,
company.
and
of
devices
should
contact your
jack used
plug
is provided
for details.
company.
are
to
subject
use
your own
with your
must be
given
of your
home has specially
equipment
equipment,
US Number is located on
REN Number is located on
and
and the Technical R
Local Telephone
equipment is a label indicating,
and
upon r
still have
In most
to
one line should
you may
to
connect
must
comply
by the
with this
not be
to state
telephone equipment
local telephone
to the
telephone
the
. If you
consult
for
connection
is
in
compliance
by ACTA.
Company
Ringer Equivalence Number
equest,
provide
the
number
all of
these devices
(but
not
connect
local telephone
that
used
wired alarm
installation
your
to your
this
equipment
with the
ACTA. A
product
is also
compliant. See
on
coin service provided
tariffs,
company.
telephone company
from your line.
have questions
telephone company
the
the
with parts 15 and 68,
equirements
this information to your
of
devices
all) areas,
not
exceed 5. To
line as determined
company.
to the
applicable
compliant telephone
. It
is designed
and
therefore,
if you are on a party line.
upon permanent
equipment connected
of this product
about what will disable
cabinet
bottom.
cabinet
to the Public
for Telephone
among other
(REN)
you may
ring
the
premises
bottom.
connect
when
your
sum
of the
be
certain
wiring
FCC
Part
cord and
to be connected
installation
by the
you may not be
does
not disable
or a qualified
for
to
RENs
of
by the
68 rules
to the
3
2
Rights of
Should
telephone
you that
prior
the
In
(1)
opportunity
bring a
S
ubpart E of
The telephone company
facilities,
required
Rules
performance
give you adequate notice,
service.
Int
This device complies
to the
interference;
including interference
This equipment has been tested
Class B
designed
residential
This equipment generates, uses,
and,
cause
guarantee
Privacy
this
reception,
the
the
•
Reorient
the
Telephone
your
equipment cause trouble
netw
ork, the
temporary discontinuance
notice is
telephone company
case
promptly notify you of
erfer
equipment does cause
user is encouraged
following
radio or
not
of
such temporary discontinuance,
to correct the
complaint
Part 68,
equipment,
in the
and
Regulations.
of your
ence Information
following
and
digital
device, pursuant
to
provide reasonable protection against
installation.
if not
installed
harmful
interference
that
of
Communications
which can be
measures:
or
television
telephone company shall, where practicable,
practicable
may
to the
Commission pursuant
FCC Rules
may
operations
operation
If
telephone
with
two
conditions:
(2) This device must accept
that may
and
used
interference
determined
to try to correct the
relocate
the
that
Company
and the
temporarily discontinue service
such temporary discontinuance;
situation;
make changes
of its
business
these changes
in writing, to allow
Part
15 of the
in
to radio
will not
may not be
harmful
receiving antenna (that is,
is “receiving”
on your
line
which may harm the
of
service
may be
circumstances
the
and
(3)
inform you of your right to
and Regulations.
or
procedures where such
equipment,
(1) This device may
cause undesired
and found to
to
Part
and can radiate radio
accordance
in its communications
and not
are
expected
the
you
FCC Rules.
any
15 of the
with the
communications. However, there
occur
in a particular installation.
ensured when using
interference
by turning the
interference
the interference).
required.
warrant
telephone company
to
procedures set
inconsistent
to affect the
telephone company
to maintain uninterrupted
Operation is
not
cause
interference
operation.
comply
with the
FCC Rules. These limits are
harmful
frequency
instructions,
to radio or television
equipment
by
the
antenna
notify
Where
such
action,
immediately.
(2)
must:
afford you the
forth in
action is
with
FCC
use
or
must
subject
harmful
received,
limits
for a
interference in a
energy
may
is
no
this
product . If
off and on,
one
or more of
for
4
•
Reorient
•
If
these measures
your
suggestions. Also, the
a
helpful booklet,
Problems.” This booklet is available
Office, Washington,
5-4
Hearing Aid Compatibility
This telephone system meets
FCC RF Radiation Exposure Stat
This equipment complies
for an
operated
and your
conjunction
For body
exposure guidelines when used
Use
guidelines.
Information for DECT Pr
This telephone is compliant with
the
subject
Any relocation
approved
Industry
This
or
relocate
and
telecommunications equipment
Connect
the
different
dealer
when ordering
Notice: The changes or modifications not expressly
by
the
authority
telecommunications equipment
from that to which the
do not
or an
experienced radio/television technician
“How To Identify
copies.
party responsible for compliance could void
to
operate
increase
eliminate
Federal Communications Commission has
D.C.
20402. Please specify stock number
the
the
separation between
and
receiving
receiving antenna is
the
interference, please
and
Resolve Radio/TV
from the
equipment
.
U.S.
(HAC)
FCC
standards
for
ement
with
FCC RF
uncontrolled
with a minimum
body. This
with any other
worn
of other
accessories
envir
onment . t
distance
transmitter must not be
operation,
antenna
this
may not
radiation exposure limits set for
his equipment should
of 20
centimeters between
co-located
or
transmitter.
phone has been tested
with the belt clip
ensure compliance
oduct
the
DECT
1.92GHz
to
1.93GHz
to notification and
of this
by
UTAM. UTAM
Canada (I.
product
meets
frequency range. Installation
coordination
equipment
must be
may be
C.) Notice
the
applicable Industry Canada technical specifications.
with UTAM.
coordinated
contacted
6.0 standard
at
1-800-42
antenna.
into an outlet on a circuit
Government
Hearing Aid
supplied
the
connected.
consult
for additional
Interference
Printing
004-000-0034
approved
the
user
Compatibility.
be
installed
the radiator
or
operated
and
meets
with this
with
FCC RF
which
operates
of this
equipment
through and
9-8826.
prepared
’s
th
and
in
the
FCC RF
product
exposure
.
in
is
5
Le présent materiel est conforme
d'Industrie
The Ringer Equivalence Number is
of
termination on an
subject only
Numbers
L'indice d'équivalence
de
terminaison d'une interface
de
la
apparatus complies
Cet appareil numérique
du Canada.
IMP
When using
always
persons, including
-Do
kitchen sink,
-Avoid using a telephone (other
storm. There
-Do
-Use only
dispose
possible special disposal
SAVE THESE
Canada.”
terminals allowed
of all the
terminaux
dispositifs,
sonnerie de tous les dispositifs n'excède pas 5.
ORT
be
followed
not
use this
not
use
the power cord and
of
batteries
to be
interface
to the
requirement
devices does
de la
qui
peuvent
à la
seule condition que
with
de la
ANT SAFETY INSTRUCTIONS
your
telephone
to
reduce
the following:
product
laundry tub, in a wet
may be a
the
near
remote risk
telephone
in a
fire. They
INSTRUCTIONS
aux
an
connected
may
consist
that the
not
exceed
sonnerie
être
peut
Canadian
to report a
instructions.
(IES)
raccordés à une interface téléphonique.
consister
ICES-003.
classe B est conforme
equipment,
the
risk
water for example, near a bathtub, washbowl
basement,
than a
of
batteries indicated
may
specifications techniques
indication
to a
la
of
cordless type)
electric shock
gas leak
explode. Check
of the
telephone interface.
of any
sum
of the
five.
sert à indiquer
en une
somme d'indices d'équivalence
basic safety precautions
fire, electric shock
or
maximum
combination
Ringer
combinaison quelconque
'' This Class B
à la
near a swimming p
during an electrical
from lightning.
in the
vicinity
in this
The
of devices
Equivalence
le
nombre
digital
norme
and
of the
manual. Do
with
local codes
applicables
number
maximal
La
de
NMB-003
should
injury
to
ool.
leak.
not
for
,
6
T
able of Cont
ents
Equipment Approval Information...2
Interference Information
Hearing Aid Compatibility
FCC RF
Radiation
S
tatement
Information
Table
Table
Introduction
Before You Begin
Installing
Advanced
Registration.............................................8
De-register
Programming
Personal
Handset
.............................................4
for
of Contents
of Contents
DECT
..........................................7
the Phone
Set ..........................................8
the
handset ....................8
Functions.....................9
setting...................................9
tone.........................................9
..................3
(HAC)……4
Exposure
Product
.................................5
................................6
..................................7
…….
...........................7
Ring volume.......................................9
Ring
melody.......................................9
Key
Beep
Handset
Auto answer
Auto
4
Language.........................................11
Using multi-handset
..............................................................11
Transfer
Making conference
conversation)
Changing
Battery Safety
Tr
Warranty
Limited
...........................................10
Name..............................10
....................................11
hang-up
.................................11
an
external
...............................12
the Battery
oubleshooting..............................13
Precautions...13
Assistance
Warranty
........................17
capabilities
call............12
call (three- way
..............13
...............17
7
Intr
oduction
CAUTION: When using telephone
safety instructions
IMPORTANT
and save them for future
IMP
ORT
you should have
cordless, in case
Before You
Parts
Checklist
Make sure
SAFETY
ANT:
Because cordless phones operate
at
the
Begin
your
package includes
that
should always be followed. Refer
INSTRUCTIONS provided with this
least one phone in your home
power in your home goes
equipment, there
reference.
the
items listed
are basic
on electricity,
that isn’t
out
.
here.
to the
product
Installing the Phone
Fit
the
rechargeable batteries in each
1) Install the
1.2V/
550mAh,
into handset in
compar
2)
Connecting AC (electrical)
1.
tment.
Close
the battery compartment
firmly to
Plug
the
into the power
AAA
batteries (Brand name:
or Brand name: SANIK, C
accordance
make sure
base
it
is
secure.
jack
power
on rear
power adaptor
handset
CORUN, Capacity:
with the polarity marked in the battery
cover,
(Type:
panel
apacity: Ni-MH 1.2V/550mAh)
sliding
it into
place
IA1560, 120Vac/6Vdc/500mA)
of the
charging
pod.
Ni-MH
and pressing
cord
8
Before
you use the
charge
the
Leave
The
battery.
If you think that the
first
If
you‟re
normal for the main adaptor to become warm this doesn't indicate a
fault.
batteries
the
handset
battery charge symbol will blink when you're charging an empty
check
that the handset is correctly
sure that it
CAUTION: Use only
Using other po wer supplies may damage
adaptor is IA1560,
Advanced
1.
Make sure
2.
Press
3.
4.
R
From
1.
2.
3.
4.
5.
6.
the
Press
the
Press
the
egistration
the
Advanced Set
Press
the
Press
the
will
show
Use
the touch tone pad to
code is
0000).
Press
the
R
egistering...
Press
and hold the
You
will
enter
the
De-register
You
may
From
need
the
Advanced Set
cordless
fully.
on the
symbol
is, remove and
Set
the
phone is OFF (not
MENU/OK
Navigation
MENU/OK
handset for the first time, it‟s important to
charging cradle
isn't
showing
refit the
the
power supply
120Vac/6Vdc/150mA.
button to go to main menu.
(or )
button to
button to
access
Navigation
MENU/OK
Enter
MENU/OK
hear
handset number
sub-menu:
(or )
button to
PIN----.
button to
FIND
a long confirmation tone if the
button to
access registration setting,
enter
confirm,
button on the
you want to arrange.
the handset
to do this in
order
to
sub-menu:
replace
for 16
hours.
the correct battery charge level,
positioned
that
in
TALK/SPEAKER
the
the 4
digits
the
base
a faulty
in the charging cradle.
batteries. Please
came with this
the
unit
. Charge
mode).
select
Advanced
setting
scroll
to the Registration.
of
PIN code (default
screen
for a few seconds.
registration is successful,
handset
Set.
menu.
displays
.
note that it's
unit
.
the display
PIN
9
1.
Press
the
2.
Press
display
3.
Use
code is
4.
Enter
5.
You
successful. The screen display
Navigation
the
MENU/OK
Enter
the touch tone pad to
0000).
the
handset number
will
hear
Programming Functions
The system uses
features. You
Set Date/Time, Personal Set, and Advanced
Personal
1.
Make sure
2.
Press
3.
Press
4.
Press
Handset
From Personal Set
1.
Press
2.
Press
program the following items: Ring Volume, Ring Melody, and Key
Beep.
Ring
From Handset Tones setting
1.
Press
2.
Press
3.
Press
volume level (High, Medium,
4.
Press
confirmation tone.
NOTE:
may program the following
setting
the
the
MENU/OK
the
Navigation
the
MENU/OK
tone
the
Navigation
the
MENU/OK
volume
the
Navigation
the
MENU/OK
the
Navigation
the
MENU/OK
If
you select Silence, Ringer off icon shows on
(or )
button to
PIN----.
a long confirmation tone if the
button to
access de-register setting,
enter
to be de-registered.
Unregistered.
the 4
scroll
digits
a menu structure to give you
items
Set
phone is OFF (not
button to go to main menu.
(or )
button to
sub-menu:
(or )
button to
(or )
button to
(or )
button to
in
TALK/SPEAKER
button to
access
the
button to
access handset
sub-menu:
button to
enter
the menu.
button to
Low, and Silence)
save
your
select
setting
select
select Ring Volume.
select
selection. You
to
Unregister.
of
PIN code (default
de-registration
access
to all of the built-in
in main
mode).
Personal
sub-menu.
Handset Tones.
tone
setting;
the
desired
the screen
is
menu:
Phonebook
Set.
you may
ringer
will
hear
the display.
PIN
,
a
10
Ring
melody
You
may
choose
From Handset Tones setting
1.
Press
2.
Press
3.
Press
tone.
4.
Press
confirmation tone.
Key
Beep
From Handset Tones setting
1.
Press
2.
Press
3.
Press
4.
Press
tone.
Handset
From
the
1.
Press
sub-menu.
2.
Press
3.
Use
than
enter Bill Smith, press
times
Press
second
and last
once
key
NOTE: 1)
to
backspace and delete one character
#/Pause/ringer button
case text
from ten
the
Navigation
the
MENU/OK
the
Navigation
the
MENU/OK
the
Navigation
the
MENU/OK
the
Navigation
the
MENU/OK
(or )
button to
(or )
button to
(or )
button to
(or )
button to
Name
Personal Set
the
Navigation
the
MENU/OK
the touch tone pad to
one
letter
for the letter I.
the 5 key 3 times for the letter
letter
name. Press
for the letter
for the letter
If
entry.
sub-menu:
(or )
button to
is stored
L,
and
press
M; press
T; press the
you make a mistake, use
different melodies for a
sub-menu:
button to
enter
button to
save
your
sub-menu:
button to
enter
button to
confirm. You
button to
enter
enter a name (up
in
each
the 2
the 7 key 4 times for the letter
of the
key
twice for the letter
the 1
key
the 4
key 3 times
4
key
twice for the letter H.
to
toggle between upper case and
ring tone.
select
Ring
the menu.
select
selection. You
select
the menu.
select On or
scroll
the menu.
number keys. For example,
L. Press
to
insert a space between
the
BACK/R/C
at a
Melody.
the
desired melody
Key Beep.
will
hear
to the
to 10
characters).
B. Press
the 5 key 3 times for the
for the letter
time. 2) Use
will
hear
a
Off.
a confirmation
Handset
button
Name
More
the 4
S; press the
I; press
the
lower
key
the first
ring
to
3
6 key
the 8
11
4.
Press
the
confirmation tone and the
Auto
From
1.
Press
menu.
2.
Press
3.
Press
4.
Press
tone.
to
call,
Auto
This
function
handset
From
1.
Press
sub-menu.
2.
Press
3.
Press
4.
Press
tone.
MENU/OK
answer
the
Personal Set
the
Navigation
the
MENU/OK
the
Navigation
the
MENU/OK
If you
answer
a call
put the
hang-up
enables
on the
the
Personal Set
the
Navigation
the
MENU/OK
the
Navigation
the
MENU/OK
button to
sub-menu:
(or )
button to
(or )
button to
select ON,
handset back
base station. By
during an
immediately
you to end a call
sub-menu:
(or )
button to
(or )
button to
handset name shows
on the
default,
Language
From
the
1.
2.
3.
4.
confirmation tone.
Using multi-handset
Personal Set
Press
the
menu.
Press
Press
Press
Note: To use intercom feature, you need
handsets link
up
Navigation
the
MENU/OK
the
Navigation
the
MENU/OK
to 4 handsets.
sub-menu:
(or )
button to
(or )
button to confirm your
capabilities
to
this product. This product is capable of link
save
your
name. You
button to
enter
button to
confirm. You
without
button to
enter
button to
confirm. You
button to
enter language
button to
scroll
the menu.
select
external call,
pressing
cradle
directly.
automatically
the
Auto Hang
scroll
the menu.
select
scroll
select
will
hear
in the display.
to the
On
or
will
hear
you may lift the handset
any
buttons,
by
up
to the
On
or
will
hear
to the
setting.
the
desired
selection. You
to
have
at
a
Auto Answer
Off.
a confirmation
to
simply
placing the
feature is
Auto
Hang-up
Off.
a confirmation
Language
language.
will
least
2
ing
end
off
sub-
hear
sub-
a
.
a
12
Making
an
1.
2.
3.
Answering
The
someone makes
handset‟s display
1.
2.
Transfer
You
the
1.
2.
3.
4.
intercom
Make sure
Press
INT
registered handsets shows
you want to page.
The cordless handset rings,
display. When
an
ringing tune for intercom calls is different from external calls. When
Press
the
To end
an
handset
an
can transfer an external call to another handset that is
base
station.
During
an
hold and the
Enter
the
When
the
Press
the
NOTE:
If the
seconds,
handset
take
the
Making conference call (three-way
You
can connect one external call to two
station.
All users
can
1.
During
an
external call
display,
2. Wait until the internal
3.
Press
and hold the
conference
call
the
phone is OFF (not
button on
intercom
TALK/SPEAKER
intercom call, press
in the
external
external call, press
handset number
receiving handset answers,
HANG UP
the
will
external call
handset,
the
handset user answers,
call
an intercom call to
with the
number
base
cradle.
call
registered handset shows
button on the
receiving handset does not answer within
external call will come back
ring. You can press
again.
in talk mode).
the Int
on the
button to
you want to page.
symbol appears
display, enter
and the Int
you,
of the
answer.
the
HANG UP
the
INT
original handset
the
symbol flashes
Int icon
handset calling
button, the
you can
TALK/SPEAKER
you will be connected.
appears
button or
on the display,
to
you and your
conversation)
handsets registered
TALK/SPEAKER
external call, press
is
enter
the
call.
and
listen
the
put on hold and the
handset number
user answers.
INT
button on
INT
original handset
simultaneously.
button on the
registered handset shows
you want to page.
and the
the
handset
on handset
on your cordless
you.
place
external
call
announce
the call.
to transfer the call.
30
button
handset ,
to start a three-way
number
the
registered to
is
put on
to
at the base
the
on the
13
4.
When finished, press
the
Changing the Battery
CAUTION: To reduce
the
approved Nickel-metal Hydride battery (Ni-MH), which
compatible with this
1.
Make sure
the battery.
2.
Remove
3.
Disconnect
battery
4.
Insert
battery
5.
Put
6.
Place handset
properly charge (for
new battery pack.
performance will be
the
the battery compartment
pack
the new battery
compar
the battery compartment door
Battery Safety
•
Do
not
burn, disassemble, mutilate,
this
type,
•
To reduce
Hydride
•
Keep batteries
•
Remove batteries
Troubleshooting
ALWAYS
first
toxic
the
battery
check
that:
the cord attached to the battery
the
unit
telephone
from the
handset
pack
tment.
in the
base
16
hours) prior
If
you do not properly charge
compromised.
Precautions
materials could
risk
of fire or
listed
in the
out of the
if
storing over
You have followed
manual to
All connectors
Main
socket. The handset‟s batteries
securely installed
HANG UP
button to
end
the conversation.
risk of fire or personal injury, use
.
is
OFF
(not
in
TALK mode) before you
door.
.
and
connect
to
back
charge.
be
released
personal injury, use only
User‟s
reach
power to the
Guide.
of children.
30 days.
install
are firmly
pack
and
remove
the cord to the
on.
Allow
the
to
or
handset battery
first use or when you install
puncture. Like
which can
all the
steps listed
and
set
up your telephone.
inserted
base
unit
and are not run down.
jack inside
the
phone,
other
cause
the Nickel-metal
in the user
in their
is switched
are correctly and
only
is
replace
the
the
to
a
battery
batteries of
injury.
sockets.
on at the
14
Everyday
use
“I cannot
make
or
answer
calls”
If the
handset‟s display is
blank, it may have
been switched
off.
Press
and hold the
HANG-UP
key
to switch it
back
on.
Check
that the
base unit‟s main
power adapter
is plugged
in and power
is switched
on.
The base
unit
needs main
power for normal
operation
of the phone
–
not just for
charging
the batteries.
Make sure
you are
using
the
telephone
line
cable supplied
with your
phone. Other
telephone
line cables
might not w
ork.
Move
the handset
closer
to the
base unit.
Check
the battery
level symbol
on the display.
If it
is
low,
replace
the
handset
on the
base
unit
or
charger
pod to
recharge
the batteries.
S
witch off power at the
main
socket, wait for a
short time and then switch
back on. This
may
solve
the problem.
“I cannot
make
a call”
If the
handset display shows
KEYS
LOCKED
,
press
and hold the * button to
unlock
it before
you
make
a call.
Only one handset (or
the
base unit)
can be
connected
to the
outside line
at a time.
If another
handset is already using
the line,
you
need
to wait until it
has finished
its call.
“When I press
on
the
keys,
nothing
happens”
Make sure
the
batteries
are fitted in your
handset
. If the
Battery Level symbol
on the
display shows
„low‟,
put your
handset back
on
the
cradle
to charge.
“When I key
in
a
number, it
appears
on the
display,
but I cannot make
an
outside
call”
Try a different position
for the
base
unit –
somewhere higher
if
possible,
or further from
other
electrical
equipment
.
Try moving
the
handset closer
to the
base unit.
15
“The phone
does
not ring”
Check
that the
base unit‟s main
power adapter
is plugged
in and power
is switched
on.
The base
unit
needs main
power for normal
operation
of the
phone –
not just for charging
the batteries.
Make sure
you are
using
the
telephone
line
cable
that
was supplied
with your package.
“My
call
was
cut off
when
I went out of
range. Now
I can‟
t
use
my
handset .”
Move
the
handset closer
to the
base
unit
before
you try
again
to
make
a call.
“There
is
interference
and
noise
on the line”
Move
the
handset closer
to the
base unit,
or to a
different
position.
Try moving
the
base
unit
so
that
it‟s
not near
other
electrical
equipment, such as
a television
or a
computer.
You‟ll
get the
best sound
if you
place
the base
unit
as
high
as possible. For example,
in a
two-story house,
the first-floor
landing is
an
ideal
place.
“I
hear „beeps‟
from my
handset while
I‟
m on a call”
You
may be
going
out of
range
of the
base unit.
Move closer
or your call may be cut off.
Check
the
Battery Level symbol
on the display.
If
it‟s
low,
recharge
the batteries.
“The Caller
Display
feature isn‟t
working”
In
order
to
utilize
the
Caller ID features
of this
phone,
you will
need
to
subscribe
to
Caller ID
with
your
Telephone service provider.
Please
contact
your
Telephone service provider
for details.
The caller
may
have BLOCKED
their number
or the
caller
may be
calling
from a network
that
does
not transmit the
Caller ID
data.
Allow at least 2 rings for the
Caller
ID data to
display.
16
“When
I try to
make
a call,
I
hear a busy
tone”
If
you‟re using a multi-handset system,
check
whether
another
handset is already
on a call.
“The volume
in the
earpiece is
low when
I‟m on a call”
Make sure you‟re holding
the
earpiece
correctly
over
your
ear.
Adjust
the
volume using
the
navigation
key.
Intercom and
transfer
“I can‟t transfer a call”
Make sure
the other
handset is
in
range
of the
base unit .
Make sure
you are
dialing
the correct number
for the other
handset
.
Battery
“The handset‟s
battery
pack is running
low
within an hour or
two”
Before
you first
use
the
handset ,
you should
have
left it on the
base
unit or
charger
pod for
16
hours
to
charge
the battery fully.
You
may
need
to
replace
the battery.
Check
the
connection between
the
base
unit
and the
main
power
socket.
“I try to
recharge
the
battery but I
still
get
a warning that they
are low”
You need
to
replace
the battery.
Dispose
of
used batteries safely – never
burn
them,
or put them
where
they
could
get
punctured.
Do
not
use non-rechargeable
battery in
your
handset –
they may
explode,
causing
damage.
If the fault
persists... Disconnect
all
other
instruments connected
to
the
same line
and try to
make
a call.
Disconnect
the
base
unit from the
telephone
line
and plug a
different phone
into the master
telephone
socket.
Try making a call.
If this works,
the
line is OK.
If the call
does
not w
ork, and you are
using
a
two-way
socket
adaptor,
remove
it and plug a
telephone directly
into the
socket.
If the call now
works,
the adaptor may be faulty.
If you cannot
make a call,
the fault may be on
the
exchange line. Contact
the
service provider.
17
Warranty Assistance
Your sales receipt
order
to
validate
the
original,
reference.
If this product
date of gift r
required
during the warranty
to the
telephone
disconnect
Purchase Date
Name
of Store
For instructions
Care
at
1-877-722-4908
com. If you prefer, you may write to
S
upr
eme Power USA
PO Box
501045
Indianapolis IN
Please do not send products
service and may result in lost or damaged product. This PO BOX is
written communication
If the
equipment is causing
company
is
resolved.
will be
required
your warranty
or a
photocopy,
was received as
eceipt, as
netw
the
equipment
or
Date Received as
on how to obtain warranty
46250-1045
may
require
of your
this information will be
ork, the
until the
or you may
LLC
only.
harm to the
that
you disconnect
to
demonstrate
eligibility. You
sales receipt
a gift, it
period.
telephone company
problem is
Gift
us
to
this address as
may want to attach either
is suggested
valuable should service
If the
equipment is causing
resolved.
service,
visit
our
website
at:
telephone
the
equipment
proof of
purchase
to this
booklet
for future
you jot down the
may
you may call Customer
at www.rca4phones.
it
only adds delays
netw
harm
require
that you
for
ork, the telephone
until the problem
in
be
in
Limited Warranty
What your limited warranty
•
Defects
in
For
how long after your purchase:
•
One
that will act
status.
What we will do:
•
Provide
of
materials
year, from date of
as
you with a new or,
same
or
similar model. The exchange model is under
covers:
or w
orkmanship.
purchase. Please
your proof of
at our
purchase
retain your
in
order
option, a refurbished exchange
sales receipt,
to
validate
as
warranty
unit
warranty for
18
the
remainder
from the date the
is
longer.
How
to get service:
•
Call Customer Care
you and
when calling us. The model number
underside
If
you
are
service is
•
We
will
damage. We recommend
materials.
•
We
will
Your name,
handwritten or
A legible copy
sales receipt)
•
Ship
your product
shipping
for
lost,
date shipped, carrier and tracking number here:
of the
original product's one year warranty,
replacement
at
please have
of the
within your limited warranty period and
required:
ask
that you
ask
you to
your product via a
mis-directed
1-877-722-4908.
your
base unit.
properly pack
include
return
typed
of
your sales receipt
prepaid,
or
product
was shipped
model number
that
with your product the following:
shipping address
on a
to the
traceable carrier,
damaged shipments. You
Please have
and date
your product to
you use
the
sheet
and
of paper
(please do not
address
and date
original
daytime phone
we
provide. We
to
you,
your product with
code
code
as
available
can be found
it
is determined that
avoid
carton and packing
send
we are not r
may want to write
•
Upon receipt
warranty and if
ship
same
cost .
What your limited warranty
•
Customer Instruction. (Your Owner‟s Manual provides
regarding operating
information may be
•
Installation
•
Batteries.
•
Damage
•
Products
products.
of your product we will
to you a new or,
or
determined
similar model. This exchange
and
from
which
at our
does
and
installation instructions. Additional
obtained
set-
up
service
misuse,
neglect,
have been modified
validate
your product
option, a refurbished exchange
not
cover:
by contacting the retailer)
adjustments.
unauthorized repair.
is
warranty
unit will be
or
incorporated
your product
eligible,
shipped
information
into other
or 90 days
whichever
on the
shipping
number
the original
suggest
esponsible
is
under
we will
unit of
to you at no
the
19
•
Products
•
Products purchased
•
Acts
Limitation of
•
THIS LIMITED WARRANTY IS THE ONLY WARRANTY APPLICABLE
THIS PRODUCT. ALL OTHER WARRANTIES,
(INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED.
VERBAL
LLC, ITS AGENTS, EMPLOYEES, RETAIL DEALERS OR
CONTRACTORS SHALL CREATE A GUARANTY OR
INCREASE THE SCOPE OF THIS WARRANTY.
•
REPAIR
IS THE EXCLUSIVE REMEDY OF THE CONSUMER. SUPREME POWER
USA LLC SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE
OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY
ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIES
LIMITED WARRANTY ARE GOVERNED BY THE LAWS OF THE STA
OF INDIANA
LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO
APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.
How state
Some states
consequential damages,
lasts so
This
warranty
rights
If
you purchased your product outside
This
warranty
Product Registration:
•
Please complete
with your product or
that
have been serviced
or
of
nature, such as
Warranty:
OR WRITTEN INFORMATION GIVEN
OR
REPLACEMENT AS PROVIDED UNDER THIS WARRANT
EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE
law
relates
do not allow the
the
above limitations
gives
that
vary
from state to state.
does
serviced outside
but not limited to,
to
this
warranty:
exclusion
or
limitations
or
you
not
and mail the
exclusions
specific legal rights,
apply. Contact your dealer
visit www.rca4phones.com
by an
unauthorized
the
USA
lightning
EXPRESS OR
BY SUPREME POWER USA
OF THIS PRODUCT OR ARISING
nor limitation of
on how long an
may not
and you
the
USA or
Product Registration Card
ser
or Canada.
damage.
INDEPENDENT
IN
ANY WA
incidental
implied
apply
to you.
also
may
Canada:
for warranty information.
to
register
vicer.
IMPLIED
AND
packed
OR
Y
TE
THE
or
warranty
have
other
your new
TO
NO
Y
product. Product registration is
does
allow
us
to contact you
not
required
should
it be necessary.
for warranty
Visit
the
RCA web site
Please do not send any products
manual or on the carton. This will only add delays in service for your
at www.rca4phones.com
to
the Indianapolis address listed
2130
Printed
in China
10-35
coverage
in thi
product.
but
s
Loading...