DECT
6.0
Multi Handset
Phone Answering Syst
User’s Guide
Please read this manual before
product for the first time.
Visit
the
RCA
web
site at
Model
operating
www.rca4phones.com
2102/ 2102-2/
Cor
dless
em
2102-3 / 2102-4
2
Equipment Approval
Your
telephone
Telephone
and Regulations and the Technical Requirements for
Equipment published
1 Notification to the Local Telephone
On the bottom of this equipment is a label indicating,
information, the
the equipment . You must,
telephone
The REN
to your telephone line and still have all of these
telephone
of all
devices connected
number of
you should contact your local
connect this equipment to the
comply with the
the
ACTA.
product It is
also
compliant. See
Notes
•
This equipment
company.
• Party
to
use
your
•
Notice must be given to the telephone company upon permanent
disconnection
•
If your
telephone line, ensure
alarm
equipment , consult your
equipment is
Network and is in compliance with parts 15 and 68, FCC Rule
by ACTA.
US
number and
company.
is useful in determining the number of
number is called.
devices
you may connect to your line as
applicable
A compliant
designed
lines
are subject to state tariffs, and therefore,
your own
local telephone
home has specially
equipment .
telephone
to be
installation instructions
may not be
telephone equipment
of your
If you
US
Number is located on the cabinet
REN
Number is located on the cabinet
Information
approved
upon request, provide this information to your
In most (but not all) areas,
to one line
FCC
connected
used
company.
telephone
wired alarm
the
installation
have questions
telephone company
for
Company
Ringer Equivalence Number (REN) fo
should
telephone company.
premises
Part
68 rules and
cord and modular plug is
to a compatible modular jack that is
on coin
from your line.
of this product
connection
not
wiring and
for details.
service provided
if you are on a party
equipment connected
about what will
to the
Telephone Terminal
devices
you may connect
devices
the sum of the RENs
exceed
5.
To
determined
A plug and jack used to
telephone
requirements
provided
by the telephone
you may not be able
does
not
bott
bott
disable
om.
om.
or a qualified installer.
Public Switched
among other
ring when your
be certain of the
by the REN,
network must
adopted by
line. Check
to the
disable
alarm
with this
s
r
with
your
3
2
Rights of
Should your equipment cause trouble on your line which may harm the
telephone network,
you that temporary
notice is not practicable and the
telephone
of
such
notify you of such temporary discontinuance; (2) afford you the opportunit
to correct the
the
Rules
The telephone
equipment, operations or
operation
If these changes are expected to affect the use or performance of your
telephone equipment,
notice,
Interference
This device complies
following two conditions: (1) This device
and (2) This device must accept any interference received, including
interference
This
Class
designed
a
residential installation. This
radio frequency energy
the instructions,
However, there is no
installation.
Privacy of
If this equipment does cause harmful interference to radio or television
reception,
user is
following
•
or television
• R e o r i e n t o r r e l o c a t e a n d i n c r e a s e t h e s e p a r a t i o n b e t w e e n t h e
telecommunications equipment
the
Telephone
company may temporarily
temporary
Commission
situation;
and Regulations.
in
pursuant to
company may
of its
business
writing,
to allow you to maintain
Company
the
telephone
discontinuance
discontinuance,
and
procedures
and not
the telephone company must give you adequate
company shall,
of
service
circumstances
discontinue service immediately.
the
telephone
(3)
inform you of your right to bring a
procedures
make changes
set forth in Subpart E of
where such action is required in the
inconsistent
uninterrupted
where practicable, notif
may be required.
warrant such action,
company
in its
communications
with
FCC Rules
service.
Where
must: (1) promptly
complaint
Part 68,
and Regulations.
In case
facilities,
Information
with
Part
15 of the
that may
equipment has been tested and found to comply with the limits for a
B digital de
to provide
Communications
which can be
encouraged
measures:
Reorient
or relocate the
cause undesired
vice,
pursuant to
reasonable
may cause harmful
guarantee
to try to correct the
that
is “receiving”
equipment generates, uses,
and, if not installed and used in accordance wit
may not be
determined
receiving
FCC Rules.
may not
operation.
Part
15 of the
protection against harmful
interference
that
interference
by turning the
interference
antenna (that is,
the interference).
and
receiving
Operation
cause
FCC Rules. These
to radio communications.
will not occur in a particular
ensured
when using this product
equipment
by one or more of the
the antenna for radio
antenna.
is
subject
harmful interference
interference
and can radiate
off and
to the
limits are
on,
prior
the
to
FCC
in
the
y
y
;
h
.
4
•
Connect
different
If
these measures
or an
the
“How
available from the
Please specify stock number
Notice: The changes
responsible
equipment .
the
telecommunications
from that to which the
do not
experienced radio/television technician
Federal Communications Commission
to
Identify and
for compliance could void the user ’s authority to operate the
eliminate
Resolve Radio/TV Interference Problems.” This booklet
U.S.
Government Printing
004-000-0034
or modifications not
equipment into an outlet on a circuit
receiving antenna is
the interference,
has prepared a helpful booklet,
5-4 when ordering
expressly
connected.
please consult
for additional
Office, Washington,
approved by the party
your dealer
suggestions. Also
D.C.
copies.
20402
Hearing Aid Compatibility (HAC)
This telephone system
FCC RF Radiation Exposure Stat
This equipment complies
uncontrolled environment. This equipment
with a minimum distance
body.
This
any other
For
exposure guidelines
Use
guidelines.
transmitter
antenna
body worn operation, this phone has been tested and meets the
of other
accessories
Information for
This telephone is compliant with
1.92GHz to 1.93GHz
notification and coordination with
Any relocation of this equipment must be coordinated through and approved by
UTAM. UTAM
may be
meets
FCC
standards for Hearing Aid Compatibility.
with
FCC RF
radiation
of 20 centim
must not be
or
transmitter.
when used with the belt clip
may not
should be
eters between
co-located
ensure compliance
DECT Product
the
frequency r
contacted
DECT 6.0
ange.
Installation of this equipment is subject to
UTAM.
at 1-800-42
9-8826.
ement
exposure
or
operated
limits set forth for an
installed
supplied
and operated
the radiato
in conjunction with
with this product .
with
FCC RF
r and your
FCC R
exposure
standard which operates in the
,
is
.
F
5
T
able of Cont
Equipment
Interference Information
Hearing
FCC RF Radiation Exposure
Information for
Industry Canada
IMPORTANT SAFETY
SAVE THESE INSTRUCTIONS
Before Yo
Approval Information.......2
Aid
u Begin
Installation
Overview of the phone
ents
Compatibility
DECT
.........................................9
.....................3
(HAC
Statement
Product
Notice
............4
..............7
.................7
(I.C.)
INSTRUCTIONS
.............................
....................10
Overview of the base station.
Display Icons
Installing the Phone
Base Station ...................................................13
Set the date and time
Set
the date and time
What
Check
Self-defined settings
Personalize
Personalize
Set
the key tone
Advanced settings
Auto conference
Change Master
Registration ..................................................17
Unregister
Restore
Area Code
Select the
Dial mode
First
ring
T
elephone
Make a call
Quick
Dial before you call
Redial
End a call
Answer a call
...................................12
........................13
forma
is
standby
the
signal strength
...............................15
mode?
...........................15
.......................15
......................15
the
phone display
the
sounds
...........................16
...........................................16
........................16
........................................16
PIN .................................16
the
handsets
default
settings
......................17
...................17
................................................18
recall
duration
..................18
..............................................18
..................................................19
Operation
...................19
...........................................19
call
.................................................19
...........................19
the
most recent number ....19
..............................................20
......................................20
.................14
...............15
).........4
........4
...7
.......11
Turn
off the
ringer
incoming calls
Adjust
..8
the earpiece volume
Mute the microphone
Intercom Operation ...................21
Make a call to
While
you are on the
Toggle between calls
Transfer
a call
Make a
conference
During
the conference call
Text and
Phonebook ...................................23
View
the
Search a
Scroll
the contact list
Call
from the
Access
the phonebook
during a call
Add a record
Edit a record
Del
ete
a record
Del
ete all records
Call
log ............................................24
View
the call records
Save
a call
phonebook
Return a call
Delete a call record
Delete all call records
Redial
list
Redial
a call
Save a redial record
the
phonebook
Del
ete
a redial record
Delete all redial records
Keypad lock
T
elephone
Turn
on/off the answering
machine
for all
.....................................20
another handset
........................................21
numbers
................................22
phonebook
record
......................................23
phonebook
..............................................23
.............................................23
..............................................24
.........................................24
.....................................24
record
to the
..................................................24
................................................25
......................................................25
..................................................25
...........................................26
.................................................26
answering machine .....27
........................................................27
...........21
........................21
phone .........21
..........................21
call
............................23
............................23
..............................24
.................................25
to
....21
.....................22
..............22
....................23
.............................25
..............................26
.........................26
6
Through
Set
machine language
Set
Announcements
Incoming messages
Listen
the
base ..........................28
the answering
the
answer mode
to the incoming
.........................28
......................28
................................28
(ICM)
........29
messages ......................................29
Del
ete
an incoming
message
....30
Call screening ....................................31
Set the ring delay ............................31
Remote access
...................................31
Default settings ........................32
Frequently asked questions ....33
Warranty Assistance ...................35
Limited
Warranty .........................35
7
LIGHTNING
A
SIGN
“DANGEROUS
INSIDE
IS A
PERSONNEL.
N M / K T
Industry Canada
This
product meets the applicable Industry Canada technical specifications.
Le
présent materiel est conforme aux
d'Industrie
The Ringer Equivalence Number is an indication of the maximum number of
terminals allowed to be connected to a telephone interface. The
on an interface may consist of any combination of
requirement that the sum of the
does not exceed five.
L'indice d'équivalence
terminaux qui
d'une interface peut
seule
dispositifs n'excède pas
This
Cet appareil numérique
Canada.
Canada.
peuvent
condition que la somme
Class B digital
apparatus
(I.C.)
Notice
specifications
Ringer Equivalence
de la
sonnerie
(IES)
être
raccordés
consister
en une
d'indices d'équivalence
5.
complies with Canadian ICES-003.
de la cla
sert à indiquer le nombre maximal de
à une
interface téléphonique. La
combinaison quelconque
sse
B est conforme à la
techniques applicables
devices
Numbers
de la
norme NMB-003 du
termination
subject only to the
of all the devices
terminaison
de dispositifs,
sonnerie
à la
de tous les
IMPORTANT
When using your telephone equipment,
SAFETY
INSTRUCTIONS
basic safety precautions should
always be followed to reduce the risk of fire, electric shock and injury to
persons, including
•
Do not use this product near water for example, near a
kitchen sink
•
Avoid using a telephone (other
storm. There
•
Do not use the
•
Use
only the power cord and
Do not dispose of
with
local codes
SAVE THESE
the following:
bathtub, w
or laundry tub, in a wet
may be a
remote risk
telephone
for
to report a gas leak in the
batteries
in a
possible special disposal
basement
than a
of
cordless type)
electric shock
or
batteries indicated
fire.
They may explode. Check
instructions.
near a swimming pool.
during an electrical
from lightning.
vicinity
of the leak.
in this manual.
INSTRUCTIONS
WARNING: TO
PREVENT FIRE OR
ELECTRICAL SHOCK
HAZARD, DO NOT
EXPOSE THIS
PRODUCT TO
OR
MOIS
TURE.
RAIN
ashbowl,
8
IMPORTANT:
should have
case the power in your home goes out.
Because cordless phones operate on electricity,
at
least one phone
in your
home
that
isn’t cordless,
Before You Begin
Parts Checklist (for 2102 single handset
Make sure your
package
includes the items listed
model)
her
e.
you
in
base
Battery
compar
cover
tment
Telephone line
For
Model 2102-2
pack
and
For
battery
For
battery
Telephone Jack Requirements
To
telephone jack, which might
here,
modular jack, call your local phone company to find
out how to get
cover.
Model
packs
Model
packs
use this phone, you need an
installed in your home. If yo u don’t have a
cord
there will be
2102-3 there will be
and
covers.
2102-4 there will be
and
one
covers.
installed.
look like
ONE
additional handset,
TWO
additional
THREE
additional
RJ11C
type modular
the one pictured
AC
power
adaptor
Handset
battery pack
charge cradle, batter
handsets, charge cradles
handsets, charge cradles
t
elephone
line
jack
Handset
Wall
plate
y
,
,
9
Installation
Digital Security System
Your cordless
ringing, unauthorized access,
INSTALLATION NOTE:
may
cause
VCRs. To
telephone should
or
VCR. If
away from these app lianc es .
devi c e s may also use the
and, if n
and/or your new telephone.
refer to
channels
DECT
wireless computer networks, multi-handset cordless telephone systems,
and some long-range
Important safety
•
Use
•
Use
•
Do not allow the charging
metal objects.
•
Do not open the
to high voltages.
•
Do not allow the
•
Risk
•
Dispose of used
•
Always use
•
For pl
equipment
•
This
fails. An alternative has
•
Do not expose the phone to excessive heat caused by heating equipment
or direct
•
Do not drop your phone or allow objects to fall on your
•
Do not use any cleaning
abrasives as these
phone
uses
a digital security system to protect against false
and
charges
to your
phone
or
minimize or prevent such interference, the base of the cordl
such interference continues, move the cordless telephone
ot
properly set,
the
to avoid interference. Typical devices that may use the
frequency for
only the power
only the
of
explosion
uggable equipment, the socket-outlet shall be installed near the
equipment is not
sunlight .
Some cordless
receive interference
not be
placed
these devices
owner’s manual for these devices on how
communication include wireless audio/video senders,
cordless telephone
instr
uctions
supply listed
batteries listed
handset,
charger
if battery
batteries
the
cables provided
and
shall
contacts
base station or
to come into
is replaced
according to the instr
be
easily
designed
to be
agents
may harm the
telephones
with
nearby TVs, microwave ovens,
near or on top of a
1.9GHz DECT
If
Certain
frequency for communication,
you are concerned with interference, please
may
syst
ems.
in the
user
or the
contact
by an
instr
instr
uctions.
battery
charger
incorrect
product
emergency
to allow
in the
user
with the
accessible.
to make
made available
containing alcohol, ammonia, benzene, or
set .
line.
operate at frequencies
TV, microwave oven
other communications
interfere
uctions.
as you could be
with liquids.
uctions.
.
with each other
to
properly set
to come into
type.
calls when the power
emergency
phone.
contact with
exposed
calls.
that
and
ess
far
ther
1.9GHz
,
10
•
Do not use the product in places where there are explosive
•
Do not let small metal objects come into
deteriorate audio
•
Active mobile phones
•
Metallic
objects may be retained if placed near or on the
quality and
damage
in the vicinity may
contact
the
cause
with the product.
product
.
interference.
hazar
handset
ds.
This
receiver.
can
Overview of the phone
15
14
5
13 6
7
12
11
1 • Earpiece
2 • End
the call.
•
Exit
the menu/operation.
3 • Scroll
4 • Exit
5 • Scroll
6 • Enter redial
7 • Flash
up on the menu.
•
Increase
the
earpiece
•
Enter
the
•
Backspace
the call log.
menu/operation.
the
volume.
characters
down on the menu.
•
Decrease the earpiece volume.
•
Enter
the
phonebook.
list and dial the recent
number.
the
phone
line
or digits.
1
2
3
4
8
9
10
8 • Press
to
•
Press
and hold to turn the ringer
enter
16
a pause.
on/off.
9 • Make the intercom call.
•
Make the
10
•Micr
11
• Mute/un-mute
12 • Press
13 • Access
conference
ophone
and hold to
lock/unlock
the main menu.
call.
the micr
keypad.
14 • Confirm selection.
•
Enter
the
options
menu.
15 • Make and receive calls
16 • Battery compartment cover
ophone.
11
Overview of the base station
1 • Increase/decrease
2 • Messages counter
3 • Delete
4 • Play
5 • Charge/in use
6 • Skip
7 • Skip
8 • Find
9 • Turn
• Stop
•
Enter
messages.
messages
forward
backward
handsets
the
messages.
registration mode
answering machine
the
playback.
indicator
speaker
9 8
volume
on/off.
1
2
3
4
5
6
7
12
Display
In standby
are
Icon Descriptions
available
Icons
mode,
on your
When
indicate
When
scrolling
The empty
The
Indicates
base
Icon blinks when
base.
The ringer is
Answering
There is
the
icons
handset
the
the battery
the
until
battery
that the
station.
an
shown on the main
.
handset is
handset is
battery
is
machine
unheard voice
off the
level (full, medium
on the
charging
off.
completes.
icon flashes and you hear an alert
low and
needs
handset is registered
the
handset is
screen
base station/char
base station/char
recharging.
message.
out of
and low).
range
tell you what features
ger, the bars
ger, the
bars
tone.
and within
range
or
is searching
of the
keep
for a
13
Installing
Installing
1.
Locate
packaged
the
2.
Locate
3.
Plug
NOTE: To ensure proper
connector is keyed and can be inserted only one w
the Phone
the
Handset
NOTE: You
CAUTION:
approved Nickel metal Hydride
Model name:
name: BYD,
Brand name: Corun, Model name:
2.4V/550mAh),
battery and battery compartment cover which are
together
handset .
the battery compartment on the
the battery
Battery
must connect the handset battery before
To
reduce the
2SN-AAA55H-S-J1, Capacity: 2.4V/550mAh;
Model name: H-
that is compatible with this unit.
inside a plastic
pack
risk
cord into the
battery
of fire or personal
battery
AAA
bag and are
jack inside
installation,
use.
injury,
(Ni MH)(Brand name : SANIK,
550BX2, Capacity: 2.4V/
NI-MH
separate
back
of the
the
compar
the
use only
AAA550*2, Capacity:
from
handset
.
tment.
ay.
the.
Brand
550mAh;
4. Insert the
5.
Close
the door up until it
Base Station
1.
Choose
and
tabletop, or you may mount it on the wall.
battery
the battery compartment by pushing
pack.
snaps
an
place
area near
your
an
cordless telephone
into place.
electrical
outlet and a
on a
telephone
level surface, such as a desktop
wall
jack (RJ11C),
or
14
2.
Plug one end
of the
3. Plug the
into the
4. Place the
verifying
5.
Allow
properly
CAUTION:
power adaptor (Manufacturer: ESL
Manufacturer
0.58A)
listed in the user’s guide. This
correctly orientated in a vertical or floor mount position.
Set
the
1 Press
MENU.
2 Select
3 Select
4 Select the setting. Select
HOURS]
»»
The setting is
of the
base
AC
jack
handset
the battery
the phone to charge for 16 hours prior to first use.
charge
To
date and time
[CLOCK] > [SET FORMAT],
[DATE FORMAT]
or [24
telephone line
and the other
power converter into
on the
back
of the base.
in the base cradle. The
is
charging.
the
reduce risk
phone,
: NanTong
of
DaMing, Type:
format
or
[TIME
HOURS]
saved.
[DD/MM] [MM/DD]
as the time display. Then press
cord into the
end
into a
modular
the electrical outlet
battery
personal injury,
performance is
, Type: IA
power adaptor is intended to b
then press
FORMA
T].
charge/in
fire, or
5060,
DM-SC060058,
[OK]
as the date display and [12
TEL LINE jack on
jack.
and the
use indicator turns on,
If
you don’t
compromised.
damage use
120Vac/6Vdc/500mA
120Vac/6Vdc/0-
to confirm.
[OK]
to confirm.
the back
DC connector
only the
;
e
15
Set
the
date and
1 P r e s s
2 S e l e c t
3 Press the numeric buttons to enter the date, then press
»»
4 Press the numeric buttons to enter the time.
•
If
5 Press
What
Your phone is
handset name, handset
Check
It displays the link status between the handset and base station.
icon was shown
Ensure
calls
If you hear warning tones when you are on the
out of battery or the
handset closer
Self
Customize
MENU.
[CLOCK] > [SET DATE/TIME],
On
the
the time is in 12-hour format, press /
[OK]
to confirm.
is standby
the
the handset is linked to the base station before you make or receive
and carry out the
-defined
the
Personalize the phone
Name
the handset
The
name of the handset can be up to 12 characters.
handset screen
1 Press
MENU.
2 Select
3
4 Press
»»
Set
1 Press
2 Select
3 Select a
»»
[PERSONAL SET] > [HANDSET NAME],
Enter
or edit the
[OK]
The setting is
the
display
MENU.
[PERSONAL SET] > [LANGUAGE],
language,
The setting is
time
handset ,
the time
then press
set menu is
[OK]
displayed.
to select
to confirm.
[OK]
[AM]
mode?
in standby
signal
to the
number, date and
strength
steady on
phone functions
handset
base
mode when
when handset is linked
station.
is out of
it
is idle. The
time, signal icon,
and features.
range. Charge
standby
screen displays
and battery icon.
with base.
phone,
the
handset
the battery or move the
settings
settings
to
make
it your own phone.
display
in standby mode.
name. To erase a character,
to confirm.
saved.
language
then press
saved.
[OK]
then press
then press
to confirm.
It is displayed on the
press [BA
CK].
[OK]
[OK]
to confirm.
to confirm.
to confirm.
or [PM].
The
is almost
the
signal
16
Personalize the
Set
the
handset’s
You can select from 10
1 Press
MENU.
2 Select
3 Select a melody, then press
»»
Set
You can select among 4 volume levels or [OFF].
1 Press
2 Select
3 Select a volume
»»
Tip
••
Set
Key
1 Press
2 Select
3 Select
»»
Adv
Auto
To
Activate/Deactivate auto
1 Press
2 Select
3 Select
4 The setting is
[PERSONAL SET] > [HANDSET TONES] > [RING MELODY],
[OK]
to confirm.
The setting is
the
handset’s
MENU.
[PERSONAL SET] > [HANDSET TONES] > [RING VOLUME],
[OK]
to confirm.
The setting is saved.
To
turn off the
Then
displays
the
key
tone
is
the
MENU.
[PERSONAL SET] > [HANDSET TONES] > [KEY BEEP],
to confirm.
[ON]/[OFF],
The setting is
anced settings
conference
join an
external
MENU.
[ADVANCED SET] >[CONFERENCE],
[ON]/[OFF],
Change Master
The Master
accessing
PIN
the answering machine remotely. The default Master
sounds
melody
melodies
saved.
[OK]
volume
level,
then press
melody, press
on the screen.
tone
sound made when
then press
saved.
call with another
conference
then press
sav
ed.
PIN
is used for
registration/unregistration
to confirm.
[OK]
and hold [#
you
[OK]
handset, press TALK
[OK]
to confirm.
PAUSE/RINGER]
press
a key on the
to confirm.
then press
to confirm.
in standby mode.
handset .
then press [OK]
button.
[OK]
to confirm.
of
handsets
then press
then press
and for
PIN
number
17
is 0000. The maximum length of the Master
Note:
If you
forget
your
0000 using a handset reset
1 Press
MENU.
2 Select
3 Enter the current Master
4 Enter the new
5
R
You
register up to 4
1 Press
2 Select
3
4 Enter the system
5 Press
»» Registration is completed
Note
••
handset displays a notification message.
registration
Unregister
1 If two
with another
2 Press
3 Select
4 Select the
5 Press
»»
Tip
•
[ADVANCED SET] >[PIN],
confirm.
egistration
assigns a handset number
The handset number displays beside
As
you enter the
PIN
The setting is
and then press
saved.
can
register
additional
handsets.
MENU
on the
[ADVANCED SET] > [REGISTRATION],
Press
and hold on the
confirmation
[OK]
If the
PIN
fails.
handsets share
handset .
MENU.
[ADVANCED SET] > [UNREGISTER],
handset
[OK]
The handset is
handset .
beep.
PIN.
to confirm the
is incorrect or no base is found within a certain period, you
the
handsets
number to be
to confirm.
unr
egister
Restore default settings
You
can
reset
your
1 Press
2 Select
MENU.
[ADVANCED SET] > [RESET],
phone settings
PIN code,
.
PIN
when
PIN
it
handsets
base
station for 5
Press
[BACK]
PIN.
in
less
to the
the
same base station,
ed.
you can
then press
prompted
will
be shown as asterisks
OK
key to confirm.
to the
to make
than 2
minutes. The base
handset .
unregistered.
the
to the
original
then press
PIN
is 8 digits.
reset
it to
its default
[OK].
and then press
base station. The base
then press
seconds
corrections.
Repeat
you can
then press
handset name
factory settings.
[OK]
(*)
on the
[OK]
to confirm.
until you
hear
automatically
the above procedure if
unregister
[OK]
to confirm.
in standby mode.
to confirm.
OK
key
scr
station can
a
a handset
to
een.
r
18
»» The
handset
3 Press
»»
All settings
Area Code
1. Press
2. Select
3. Use the
4. Press
NOTE: To restore the default setting
BACK
Select
Ensure
call. In normal case, the phone is already preset for the recall duration. Yo
can select among 3 options: [SHORT], [MEDIUM]
available
service provider.
1 Press
2 Select
3 Select an option, then press
»»
The setting is
Dial mode
Note: This feature only applies
support both tone and pulse dial.
Dial mode is the telephone signal used in your country. The phone supports
tone (DTMF) and pulse (rotary) dial. Consult
information.
Set
the
1 Press
2 Select
3 Select a dial mode, then press
»»
The setting is saved.
Note:
call for temporary tone mode. Digits entered for this call are
sent out as tone
displays a confirmation request.
[OK]
to confirm.
are r
eset
.
MENU.
[ADVANCED SET] > [AREA CODE],
touch-tone
[OK]
to confirm.
button when the screen displays
the
recall duration
that the recall time is set correctly before you can answer a second
options
MENU.
[ADVANCED SET] > [FLASH TIME],
pad to enter your 3-digit area
varies
with different countries. For details, consult your
saved.
[OK]
then press
to - - -,
then press
to confirm.
[OK]
code.
press and r
AREA CODE.
and [
[OK]
to confirm.
elease
LONG]. The numbe
to confirm.
r of
to
models
that
dial mode
MENU.
[ADVANCED SET] > [DIAL MODE],
If
your phone is in pulse dial mode, press
signals.
[OK]
then press
to confirm.
the service provide
[OK]
[*]
r for detailed
to confirm.
button during
then
a
u
19
First
ring
If
you have subscribed to the caller
phone can
Afte
subscribed and start to
suit your preference. This feature only applies to models with
Turn
1 Press
2 Select
3 Select
»»
suppress
r the phone is reset, it can detect automatically
the first ring
MENU.
[ADVANCED SET] > [FIRST RING],
[ON]/[OFF],
The setting is saved.
Note:
To
the
first ring before the caller ID displays
suppress
on/off
press
[OK]
reset the first ring status, go to the reset menu.
ID
the first ring. You
to confirm.
service with your service provider,
if
can
then press
[OK]
on the screen.
the caller ID service i
change
this setting
first ring support.
to confirm.
T
elephone Operation
Make
a call
•
You
can
make
a call in
these
•
Quick
call
•
Dial
before you call
•
Redial
•
•
•
Quick
1 Press .
2
»»
»»
the most
Call
from the
Call
from the
Call
from the call log
call
Dial
the phone
The number is dialed out.
The
duration of your current call
Dial before you
1
Dial
the phone
•
To erase a digit, press [BA
•
To enter a pause, press
2 Press to dial out the call.
Redial
the
1 Press .
2
Press
REDIAL.
recent
redial list .
phonebook
number.
call
number
most recent number
ways:
number
list
is
displayed.
CK].
and hold [#PAUSE/RINGER].
your
s
to
20
3
Press
[OK].
»»
The
most
recent number is
Call from
1 Press
2 Press the
3
Press
Call from
1
Press
2 Press the
3
Press
Call from
1 Press the
2
Press OK
3 Press the
4 Press the
End
You
•
Press
•
Place
Answer
When
Warning:
avoid
Tip
••When
Turn off
There
1
Press and hold [#PAUSE/RINGER]
the
redial
REDIAL.
UP
or DOWN key to select the number with your desired dial out .
the
CALL.
the
phonebook
the
PHONEBOOK.
UP
or
the
Note: The call timer displays the talk time of your current call.
Note:
out of battery or the handset is out of range. Charge
battery or move the handset nearer to the base
DOWN
CALL.
the
call
CALLER ID.
entry the
UP
or Down key to select the number you
CALL.
If
you hear warning tones,
a call
can
end
a call in
or
handset
these
to the
EXIT
the
;
a call
the
phone rings,
When the handset rings,
ear damage.
Note: The caller
to the caller
there is a missed call, the
are two ways to turn off the
ID
service with your service provider.
the
ringer for all incoming
then
dialed out .
list
list
key to select the number you
log
CALL LIST.
the
handset is
ways:
base
station or
press to
ID
service is available
charging
answer
the call.
keep the handset away from your ear to
if
handset
displays a notification
calls
ringer:
in
standby
cradle.
you have
mode.
desire.
desire.
almost
the
station.
registered
displays
message.
on the screen.
21
2 When the
Adjust
the
phone rings, press
EXIT
earpiece volume
.
Press or to
»»
The earpiece volume is adjusted
Mute
the
1 Press
[MUTE]
»» The
handset
»»
The caller
2 Press
[MUTE]
»»
You
can now
Intercom Operation
An intercom call is a call to another handset that
station.
A conferenc e call
handset user
Make a call
Note
••
If the
base
press INT
1
2 Select a
»»
3 Press on the
»»
4 Press
Note
••
While you
You
1
2
3 Select a
Toggle between calls
Press INT
Transfer
1
to
Press INT. The
handset
The selected handset
The
intercom is established.
EXIT
If the
selected handset is occupied
can go from
Press
INT.
The
current
handset
to switch
a call
Press INT
adjust
the
volume
and the
micr
ophone
button during a call.
displays
cannot
button again to un-mute the micr
communicate
[MUTE
hear you,
ON].
but you can
with the
and the
to
another handset
station only
make
a call to another handset.
handsets available
number, then press
selected handset .
to
cancel
are
on
one handset
caller is
number, then press
between
during a call.
involves a conversation
outside callers.
has 2 registered handsets,
for
rings.
or
end
the
the
phone
put on hold.
intercom
in a
to another during a call:
the
outside
during a call.
phone is back
still hear his
caller.
ophone.
intercom
[OK]
[OK]
call and the
to confirm.
call.
call,
you
to confirm.
are displayed.
hear
to the call screen.
voice.
shares
the same base
among you,
a busy tone.
intercom
call.
another
22
2 Select a
3 Press
»»
Make a conference
A
3-way
outside callers.
During an external call
1
»»
»»
2 Select or enter a
»»
3 Press on the
»»
4 Press and hold
»» You
5
Note
Press to join an ongoing
SET] > [CONFERENCE] is set
During
1
Press INT
»»
2
Press INT
3
Press
Note
••
other
Text and
You
other
Enter text and
1
2
Example
Press 7 once: P
handset
number, then press
when
is
now
the other
transferred
The
EXIT
call
call
conference
Press INT
The handsets available
The external caller is
The selected handset
The intercom is
are now on a 3-way
selected handset .
Press
EXIT
the
to put the
The external
to
and hold
If a
handset hangs
handset remains connected
call is a call
It
requires
to initiate an internal call.
put on hold.
handset
rings.
selected handset .
established.
INT
on your
end
the
conference
to
conference
external
call
is
put on hold.
toggle between
INT
to
establish
up during the
numbers
can enter text and
menu
items.
numbers
number
Press once
character.
Press [BACK]
or
several times
to
to write “Paul”
delete
the
two
for
[OK]
side answers
to the
between
handsets
intercom
number, then press
handset .
conference
call.
conference
to [ON].
to confirm.
your call.
selected handset .
you,
to
share
are displayed.
call with the external call and
with
another handset
the
same base
[OK]
to confirm.
another handset
user and
station.
call
call on hold and go
the
external
the
conference
conference call,
to the
external
for handset name, phonebook records, and
on the
alphanumeric
character
.
back
to the internal call.
and internal call.
call again.
the
call.
key to
enter
the
the
if [ADVANCED
the selected
23
Press 2 once: a Pr
8 two
times:
5
three times:
Press
and hold [#PAUSE/RINGER]
lowercase
u Press
l
letters.
ess
to switch between the
uppercase
Phonebook
This phone has a phonebook t hat stores up to 50 records. You can access the
phonebook fr om the handset. Each
characters
View
Note
••
1 Press
2
Search
You
•
•
Scroll
1 Press
2 Press and to
Enter
1 Press
2
Press
The first record that starts with this
Call from
1 Press
2
3 Press to
Access
1 Press
2 Select the
»»
Add
Note
long and a number up to 24 digits long.
the phonebook
You
can
view
the
MENU > [PHONEBOOK] > [LIST ENTRY]
Select
a contact and
phonebook
view
a record
can
search
the
Scroll
the
Enter the first
the
MENU > [PHONEBOOK] > [LIST ENTRY]
phonebook records
contacts
list .
character
contact
of the
list
scroll
the first character of a
MENU > [PHONEBOOK] > [LIST ENTRY]
the
alphanumerical
key that
the phonebook
MENU > [PHONEBOOK] > [LIST ENTRY]
Select
a contact in the
the
[OK],
The number
phonebook during
select
contact ,
can be viewed.
phonebook list .
make
the call.
[PHONEBOOK]
then press
a record
the
record can have a name up to
on
one handset
available
contact
through the
contact
corresponds
character
to
information.
in
these
.
to
phonebook
to
is
displayed.
to
only
each
access
the
ways:
access
the phonebook menu.
entries.
access
the
to the
character.
access
the
a call
then press
[OK]
[OK]
to confirm.
again to confirm.
time.
phonebook
phonebook
phonebook.
list .
list .
and
14
24
••
If
your
phonebook
message.
1 Press
2 Select
3 Enter the name then press
4 Enter the
Tip
••
For
and
and
Tip
••
Press
»»
Your
Edit
1 Press
2 Select
3 Select the
4
Edit
5
Edit
»»
The record is
Delete
1 Press
2 Select
3 Select a
»» The
4 Press
»»
The record is
Delete some records to add new
MENU.
[PHONEBOOK] > [NEW ENTRY],
number, then press
more information on how to edit the name
number,
number
s.
and hold to
new
a record
MENU.
[PHONEBOOK] > [EDIT ENTRY],
the name, then press
the
number, then press
a record
MENU.
[PHONEBOOK] > [DELETE ENTRY],
contact ,
handset
[OK]
Delete all
1 Press
MENU.
2 Select
The
3 Press
»»
[PHONEBOOK] > [DELETE ALL],
handset
[OK]
All records
memory is
see
the
section
[#PAUSE/RINGER]
record is
contact ,
saved.
then press
saved.
then press
displays a confirmation request .
to confirm.
deleted.
full,
[OK]
[OK]
on Text
[OK]
[OK]
to confirm.
[OK]
[OK]
the
handset
then press
to confirm.
to confirm.
to
insert
then press
to confirm.
to confirm.
then press
to confirm.
records
displays a confirmation request.
to confirm.
are deleted.
press
displays a notification
ones.
[OK]
to confirm.
a pause.
[OK]
to confirm.
[OK]
to confirm.
[OK]
to confirm.
Call log
The
call log
stores
call history
the call history of all
includes
the name and number of the caller,
missed
or
received calls. The
call time and date.
incoming
25
This
feature is available
service provider.
You
r phone can store up to 10 call records.
his identity, you can view his name or
in
chronological order
Note
••
Ensure
the
from the call
View
the
call
1 Press .
2 Select
»»
3
[CALL LIST],
The incoming
Select a record,
Save a call record
1 Press .
2 Select
»»
3 Select a record, then press
4 Select
5 Enter and edit the name, then press
6 Enter and edit the
»»
Return
1 Press .
2
3
4 Press to
[CALL LIST],
The incoming
[SAVE NUMBER],
The record is
a call
Select [CALL LIST],
Select a record
Delete a call
if
you have registered to the caller
with the most
number
in the call list
list .
records
then press
call log
is
displayed.
then
press [OK]
to the phonebook
then press
call log
is
displayed.
then press
number, then press
saved.
then
press
on the
list .
make
the call.
record
recent received
is valid before
[OK]
to
[OK]
[OK]
to confirm.
[OK].
If
the caller allows
number.
to confirm.
view
the
to confirm.
[OK]
to confirm.
[OK]
to confirm.
[OK]
to confirm.
ID
The
call
records
call at the top of the
you can call
available
information.
service with
the display of
are displayed
back
directly
your
list
.
1 Press .
2 Select
3
4 Select a record, then press
5 Select
»»
Delete all call
[CALL LIST],
The incoming
[DELETE ENTRY],
The record is
call log
deleted.
records
then press
is
displayed.
then press
[OK]
[OK]
to confirm.
to confirm.
[OK]
to confirm
26
1 Press .
2 Select
»»
3
4 Select
»» The
5 Press
»»
Redial
The
or
View
1 Press
3 Use and to
Redial
1 Press
2
»»
Save a redial record
1 Press
2 Select a record, then press
3 Select
4 Enter and edit the name, then press
5 Enter and edit the
»»
Delete a redial
1 Press
2 Select a record, then press
3 Select
»»
Delete all redial
1 Press
2
3 Select
4 The
5 Press
[CALL LIST],
The incoming
Press [OK]
[DELETE ALL],
handset
[OK]
All records
then press
call log
to
to confirm.
are deleted.
is
enter
the
then press
displays a confirmation request.
list
redial list
numbers
the
REDIAL
stores
the call history of
you
have called. This phone
redial
records
to enter the list of dialed calls.
a call
REDIAL.
Select
The number is dialed out .
The record is
the
record
you want to
REDIAL
to enter the list of dialed calls.
[SAVE NUMBER],
number, then press
saved.
record
REDIAL
to enter the list of dialed calls.
[DELETE ENTRY],
The record is
deleted.
records
REDIAL
Press [OK]
handset
to enter the list of dialed calls.
to
enter
[DELETE ALL],
[OK]
the
then press
displays a confirmation request .
to confirm.
[OK]
displayed.
options
menu.
[OK]
view
the call
call.
to the phonebook
[OK]
to confirm.
then press
[OK]
to confirm.
then press
options
menu.
[OK]
to confirm.
to confirm.
dialed calls.
can
store
list .
Press .
[OK]
to confirm.
[OK]
to confirm.
[OK]
to confirm.
[OK]
to confirm.
to confirm.
It
includes
up to 5
redial
the
names
records.
and/
27
»»
All records
Keypad
You
can
Lock
1 Press and hold
»»
The keypad is
Note
•
When
incoming
The
keypad is
finish the call.
Unlock
1 Press and hold
»»
The keypad is
Locate the
1 Press on the
»»
All handsets connected
2 Press on the
»»
All handsets
3
Press
are deleted.
lock
lock
the
the keypad
the keypad is
calls.
unlocked
the keypad
handset
stop
any key on
keypad
to
prevent accidental
[*/FORMAT]
locked.
[*/FORMAT] key.
unlocked.
key in
standby mode.
locked, no call can be made.
during the call but is
base
station.
to this
base
base
station
again
ringing;
or
one handset
to stop ringing.
button presses.
locked
station ring.
to stop ringing.
Telephone answering
Your phone includes a telephone answering machine
calls
when it is
REC.] mode.
the
settings
Turn on/off
You
can turn on/off the
handset
Through
1 Press
2 Select
3 Select
»»
The setting is
NOTE:
on.
By
default,
You
can
also access
through the
the
.
answering machine menu
answering
answering
the handset
MENU.
[ANSWER MACHINE] > [ANSWER ON/OFF],
[ON]/[OFF],
then press
saved.
The answering
machine
the
answering machine
the
answering machine
machine
machine through the base station or the
[OK]
to confirm.
system
displays “- -” when it is off.
You
can still answer the
automatically after you
that
records
handset .
[OK]
unanswered
[ANSWER
to confirm.
is set to the
remotely and change
on the
then press
&
28
Through
1 Press to turn on/off the
Note
••
When the
a
Set
Note
This
The answering machine language is
1 Press
2 Select
3 Press
4 Select a
»»
Set
You
messages. Select [ANSWER & REC.]
Select [ANSWER ONLY]
1 Press
2 Select
3 Select an answer mode, then press
»»
Note
••
the base
answering machine
answering machine is switched on,
certain number
the
answering machine
feature only applies to models with
MENU.
[ANSWER MACHINE] > [SETTINGS] > [L
[OK]
The setting is
the
answer
can set the answering machine and select if the callers can leave
MENU.
[ANSWER MACHINE] > [ANSWER MODE],
The setting is saved.
If the memory
mode automatically.
to confirm.
language,
saved.
is full,
of
rings based
on the ring delay setting.
language
the
then press
[OK]
to confirm.
mode
if you forbid the
the
if you allow the
callers
[OK]
answering machine switches
multiple-language
language
in standby mode.
it
answers incoming calls
support.
for the announcements.
ANGUAGE].
to
leave
to confirm.
callers
messages.
then press
to
to
leave messages.
[OK]
to confirm.
[ANSWER
Announcements
The
announcement
machine picks up the call. The answering machine has 2 pre-recorded
announcements:
Record
The
newly
1 Press
2 Select
3 Select
4 Select
5 Recor
an announcement
maximum length of the
recorded announcement
MENU.
[ANSWER MACHINE] > [RECORD OGM],
[ANSWER & REC.]
[RECORD OGM],
ding
is the
the
[ANSWER & REC.]
starts after the
then press
message
or
your caller hears when the answering
mode
announcement
automatically
[ANSWER ONLY],
[OK]
beep.
and
[ANSWER ONLY]
you can record is 2
replaces
to confirm.
the old one.
then press
then press
[OK]
[OK]
mode.
minutes.
to confirm.
to confirm.
after
ONLY]
The
29
6
Press [OK]
»»
You
Note
••
To
announcement
Note
••
Ensure
announcement.
Listen to the
1 Press
2 Select
3 Select
4 Select
»»
You
Note
••
You
incoming
Delete
1 Press
2 Select
3 Select
4 Select
5 The
Note
••
No
to stop
can
listen
restore the
that you
recording
to the newly
pre-recorded announcement,
.
speak close
announcement
MENU.
[ANSWER MACHINE] >[RECORD OGM],
[ANSWER & REC.]
[PLAY],
then press
can
listen
can no
longer listen
call.
or
to the current
an announcement
MENU.
[ANSWER MACHINE] > [RECORD OGM],
[ANSWER & REC.]
[DELETE],
pre-recorded announcement
pre-recorded announcement
then press
Incoming messages
Each message
the new
handset
Note
••
If you
stops
Note
••
If the memory
automatically.
Listen to the incoming
You
can
can be up to 3
message
displays a notification
pick
and you can talk to the
listen
indicator flashes on the answering machine and the
up the
phone when
is full,
the
Delete old
to the
incoming messages
or the
recording stops
recorded announcement
to the
microphone when
after 2 minutes.
on the
delete your
you
curr
record
handset
ent
[ANSWER ONLY],
[OK]
to confirm.
announcement .
to the
announcement when
or
[ANSWER ONLY],
[OK]
to confirm.
is r
estor
can be
then press
then press
then press
then press
ed.
deleted.
[OK]
to confirm.
[OK]
to confirm.
you
pick
up an
[OK]
to confirm.
[OK]
to confirm.
(ICM)
minutes long. When
message.
answering machine switches
messages
the
caller leaves a message,
caller
directly.
to receive new
messages
in the
you
receive
ones.
sequence
new
the recording
to
[ANSWER
they are recorded.
.
an
messages,
ONLY]
30
From
the base
S
tar
t/S
top
•
•
Adjust the volume: Press + / -.
•
Skip
- When you listen to the messages,
beginning.
- During the first second of the current
previous
•
Skip forward:
•
Delete the current
Note
••
No deleted messages
From
1 Press
2 Select
»»
New messages
start playing if there
•
Press [BACK]
•
Press
•
Press /
Delete
From
1 Press
»»
The
From
1 When you listen to the
2 Select
»»
The
listening:
backward:
message.
the handset
MENU.
[ANSWER MACHINE] > [PLAY],
[MENU]
an
incoming
the base
when
current
the handset
[DELETE],
current
Delete all old incoming
From
the base
1
Press
and hold in standby mode.
»»
All
old
messages
From
the handset
1 Press
MENU
2 Select
»» The
3 Press
[ANSWER MACHINE] > [DELETE ALL],
handset
[OK]
to confirm.
Press
Press to
message:
start
is
no new message.
to stop listening.
to enter the options
to
increase/decrease
.
press to
skip
to the next message.
Press
can be recovered.
playing. Old messages
menu.
message
you
listen
message is
then press
message is
to the message.
deleted.
message,
deleted.
[OK]
press
to confirm.
messages
are
permanently
on the
handset .
displays a confirmation request.
message,
.
then press
the volume.
[MENU]
deleted.
listen
to the
press to
[OK]
to confirm.
to enter the options
then press
[OK]
message
listen
to confirm.
from the
to the
menu.
31
»»
All
old
Note
••
Call
You
the call.
From
Press + / - to adjust the speaker v ol um e during call screening. The lowest
volume level
Set
You
machine picks
1 Press
2 Select
3 Select a new setting, then press
»»
Note
•
Tip
When
set the ring delay to
your messages.
When
3
rings.
messages
You
can
delete
recovered.
scr
eening
can hear the caller while he is
the
base
the
ring
can set the number of times the phone rings before the answering
MENU.
[ANSWER MACHINE] >[SETTINGS] > [RING DELAY],
confirm.
The setting is saved.
Ensure
that the
be applied.
you
access
there are new
rings; when
Remote access
The unit answers
system, enter your 4-digit
You
can operate your
Simply make a call to your phone with a touch tone phone and enter your
4-digit
PIN
Note
•
Activate/deactivate
You
code.
The remote access PIN code is
is 0000.
can allow or
are
permanently
the
read messages only. No deleted messages
turns off the call
delay
up the call.
answering
the
answering machine remotely,
[ECONOMY]
messages,
there
are
no
after 10 rings
PIN
answering
the
block remote access
deleted.
can be
leaving a message.
scr
eening.
[OK]
to confirm.
machine is switched on before this feature can
mode.
This
is a cost effective way to
the
answering machine picks
messages;
CODE.
remote access
it
picks
if it is turned off
machine when you are away from home.
the
same as
your
to the
answering
Press to pick up
then press
you are
recommended
access
machine.
up the call after
the answering
up the call after 5
. To
system PIN. The preset
[OK]
to
manage
PIN
to
32
1 Press
MENU.
2 Select [ANSWER MACHINE] > [SETTINGS] > [REMOTE ACCESS],
to confirm.
3 Select a new setting, then press
»»
The setting is
Access
1 Make a call to your home number with a touch tone
2
Enter # when
3 Enter your
beep
to start playing messages.
Note
••
You have 2 chances
up.
4 Press a key to carry out a function. See the Remote access commands table
below
Note
••
When
pressed
Remote access
Key Function
1
2
3
6 Delete the current
7
8
9 switch the
saved.
the
answering machine
you
hear
PIN
code,
can be
for a list of
there
for 8 seconds.
if
heard,
and then you
to
available
is
no
message,
commands
Repeat
Listen
Skip
S
witch the
(not available when
S
top
(not available when
the remote
[OK]
to confirm.
remotely
the
announcement .
access
code is correct , a
need
to
press
enter
the correct
functions.
the
the current or
to messages.
to the next message.
answering machine
listening
answering machine
PIN code before
phone hangs
message.
you
to the message.
you
the 2
up automatically if no key is
listen
to the
listen
to the messages).
off.
listen
to the messages).
phone.
key,
previous
on.
then press [OK]
confirmation
within 8
your
phone
message.
seconds,
hangs
Default
Language English
Handset
Time/Date 00:00
Date format
Time
Phonebook
Recall
settings
name
format
memory Empty
time Long (600ms)
Handset
DD-MM-YY
24hr
1
01/01/10
33
Master pin
First
ring On
Conference On
Dial
mode
H/S ringer melody Melody 1
H/S ringer
H/S earpiece
Handset
Incoming
Redial
Answering
Answer
Answer
HS
Remote
OGM
Ring
ICM
Base playback
Base screening
volume
volume
key beep On
call log Empty
list Empty
Machine
On/Off On
mode
screening Off
access On
delay 5 rings
length 3 min
0000
T
one
Level
Volume
Answer & R
Pre-recorded
volume L5
volume L5
3
3
ec.
announcement
Fr
equently asked questions
The signal icon blinks on
•
The
handset
•
If
the
Tip
•
For
more
If I
fail
do
I do?
Y
our
base memory is
No dialing
•
Check
•
The
No docking
•
The handset is
•
The charging contacts
Disconnect the power supply first and clean the
is out of range. Move it closer to the base
handset
displays
information, see “Registration”
to
register
the
full.
tone
your
phone
handset
connections.
is out of range. Move it closer to the base
tone
not
placed
the screen
[UNREGISTERED],
register the
on the
additional handsets
Un-register the unused handsets and try
properly on the
are dirty.
base station/char
station.
handset
Advanced settings
to the
base station,
station.
ger.
contacts
with a damp cloth.
.
again.
section.
what
34
The handset on the charger does not char
•
Ensure
•
•
No
•
•
the battery
Ensure
the handset is placed properly on th e charger.
animates when
Batteries
are
display
Ensure
the
Ensure
there are power and
Bad audio (crackles, echo, etc.)
The
handset
•
The
phone
Move the base station away from
•
The phone is at a location with thick walls. Move the base away from
pack is inserted
charging.
defective. Purchase
batteries
are charged.
phone
properly.
new
connections.
is nearly out of range. Move it closer to the base
receives interference
from the nearby electrical
them.
ones
ge.
from your
The
dealer.
station.
The handset does not ring.
Ensure
the
handset ringtone is
The caller
•
The service is
•
The caller’s
When I see [WAITING…] on
The
items of information are stored in the base station.
retrieves
press /
The
during a call.
••Disconnect
again
ID
does not display.
not
activated. Check
information
phone is recalling the memory of the
the data from the base station after a few seconds. When
call
handset loses connection
after 1 minute.
log/phonebook
the power supply from both the
turned on.
is withheld
the
with your
or unavailable.
screen, what is happening with
information
with the
service provider.
phonebook
is displayed
base
or the
handset
and call log. Both
Then
the handset
on the
sound is distorted
and base station. Try
battery icon
appliances.
them.
the phone?
you
handset
.
35
W
arranty Assistance
Your sales
validate
or a
If this product
of gift r
during the warranty
netw
equipment
Purchase
Name
For instructions
Care at
www.rca4phones.com. If you prefer, you may write to
S
upr
PO Box
Indianapolis
Please
and may
communication
If the equipment is causing harm to the
company may
resolved.
receipt
will be
required
to
your warranty
photocopy,
was received as
eceipt , as
ork, the
telephone
until the
Date or Date Received as Gift
of Store
1-877-722-4908
eme Power USA
501045
IN
do not
send products
result
eligibility. You
of your
sales receipt
this information will be
period.
company may
problem is
on how to obtain warranty
or you may
LLC
46250-1045
in lost or
require
damaged product. This PO BOX is
only.
that you
demonstrate
may want to attach
to this
a gift , it
is suggested
If the
resolved.
to this
valuable should service
equipment is causing
require
visit
address as
disconnect
proof of
booklet
that you
service,
our website at
it only
telephone network,
the
equipment
purchase
either
for future reference.
you jot down the date
you may call Customer
us
adds delays
the original,
be required
harm to the telephone
disconnect
at:
for written
the
in service
the telephone
until the
in
order to
problem
is
Limited Warranty
What your limited warranty
•
Defects in materials or w
For
how long after your purchase:
•
One
year, from date of
will act
as
What we will do:
•
Provide
same
remainder
date the
How
your proof of
you with a new or,
or
similar model. The exchange model is under
of the original product’s one year warranty, or 90 days from
replacement
to get service:
covers:
orkmanship.
purchase. Please
purchase
at our
product
was shipped
retain your
in
order
to
option, a refurbished exchange
sales receipt , as
validate
warranty status.
warranty for the
to
you, whichever is
longer.
that
unit of
the
36
•
Call
Customer Care at
product with you and
date
code available when calling us. The model number
date
code
If
you
it
is determined that service is
•
We
We recommend
•
We
•
Ship
shipping
responsible for lost, mis-directed or
want to write the date
•
Upon receipt
warranty and if
ship
or
What your limited warranty
•
Customer Instruction. (Your
regarding operating
information may be
•
Installation
•
Batteries.
•
Damage from misuse, neglect, unauthorized repair.
•
Products which have been modified or
•
Products
•
Products purchased
•
Acts
can be found on the
are
within your limited warranty period
will
ask
that you properly
will
ask
you to
o
Your name,
handwritten or typed on a
o
A legible
sales receipt )
your product
your product via a
of your product we will
to you a new or,
similar model. This exchange
and
that
of
nature, such as
1-877-722-4908.
please have
underside
required:
that you
include
return
copy of your
prepaid,
determined
at our
and
obtained
set-
up
have been serviced
or
pack
use
the
with your product the following:
shipping address
sales receipt ( please
to the
traceable carrier,
shipped, carrier
your product
option, a refurbished exchange
does
not
Owner’s Manual provides
installation instructions.
by contacting the retailer)
service
adjustments.
serviced outside
but not limited to,
Please have
your
model number
of the
your product to
original
carton and
sheet
of paper
address
we
damaged
and tracking
validate
is
unit will be
cover:
incorporated
by an
unauthorized
the
lightning
and daytime
provide. We
as
shipments. You may
your product
warranty
shipped
USA
Limitation
•
THIS LIM IT ED WARRANTY IS THE ONLY WARR ANTY
A P P L I C A B L E
EXPRESS OR IMPLIED
MERCHANTABILITY
HEREBY
of Warranty:
TO THIS PRODUCT.
(INCLUDING
OR
DISCLAIMED. NO VERBAL OR WRITTEN INFORMATION
FITNESS FOR A PARTICULAR PURPOSE) ARE
ALL
OTHER WARRANTIES,
ALL IMPLIED WARRANTIES OF
your
and
base unit .
and
avoid shipping
packing
do not
we are not
number
eligible,
to you at no
information
Additional
into other products
ser
or Canada.
damage.
and
materials.
phone
send
suggest
here:
is
under
we will
unit of same
vicer.
damage.
number
the original
cost
.
37
GIVEN BY SUPREME POWER USA LLC, ITS AGENTS, EMPLOYEES,
RETAIL DEALERS
CREATE A GUARANTY
THIS WARRANTY.
•
REPAIR OR REPLACEMENT AS PROVIDED UNDER T H I S WARRANTY IS
THE
EXCLUSIVE REMEDY OF THE
LLC SHALL NOT BE LIABLE FOR INCIDENTAL OR
OR
INDEPENDENT CONTRACTORS
OR
IN ANY WAY INCREASE THE SCOPE OF
CONSUMER. SUPREME
SHALL
POWER
CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING
OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED
ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIES
LIMITED WARRANTY ARE GOVERNED BY THE LAWS OF THE
WARRANTY
AND
STA
OF INDIANA EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE
LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS
FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO
THE APPLICABLE WARRANTY PERIOD SET FORTH
How state
If
you purchased your product outside
This
Product Registration:
•
law
relates
to
this
Some states
do not allow the
consequential damages,
lasts so
the
This
rights
warranty
above limitations
warranty
gives
that vary from state to state.
does
not
warranty:
or
limitations
you
specific legal rights,
apply. Contact
Please complete
your product or
and mail the
visit
www.rca4phones.com
product. Product registration is
but
does
allow
us
to contact you
exclusion
nor limitation of
on how long an
or
exclusions
the
your
Product Registration Card packed
not
required
should
it be necessary.
ABO
VE.
incidental
implied
may not apply to you.
and you
also
may
USA or
Canada:
dealer
for warranty information.
to
register
your new
for warranty coverage
USA
TE
or
warranty
have
other
with
38
Please
manual or on the
do not
2102
Printed
in China
10-35
Visit the RCA web
send
any
products
carton. This
will only add
site at www.rca4phones.com
to the
Indianapolis address listed
delays
in
service
for your
in
this
product .
Loading...