Razer RZ350259 User Manual

User Manual - CE / FCC / IC Safety Warning Notice

Razer Phone 2 Model : RZ35-0259

FCC ID: RWO-RZ350259 IC: 8092D-RZ350259

Safety Guidelines & User Manual

Basic safety

Please follow these suggestions and safeguards to decrease the chances of damage to your product,
accessories, or any connected devices, and to lessen the risk of harm or injury, such as from fire, burns, or
electric shock:
! Use the product for its intended purposes only.
! Do not open or take apart your product, adapter, or accessories.
! Do not crush, perforate, drop, throw, or try to deform your product, adapter, or accessories.
! Do not short external contacts or circuits, expose your product or adapter to open flames or lit
substances, or dispose of them in fire, solvents, or water.
! Do not use the product or adapter if they aren't working properly or have been damaged, cracked, or
dropped.
! Do not expose the product or adapter to water or other liquids.
! If the product or adapter gets wet, do not try to dry it using any household device such as an oven,
microwave, or hair dryer.
! Do not twist, pinch, or tie the USB cable.
! This product is intended for use with a certified Class 2 limited power source rated: max load current 3A at 5V, 2.67A at 9V, 2.0A at 12V.
! The product and charger generate heat during normal operation. Avoid prolonged, direct, or indirect skin
contact, since this may result in discomfort or burns.
! Some applications or prolonged usage may increase product temperature.
! If the product feels hot, discontinue use and close all applications or turn off the product until it cools.
! Ensure that the area around the product is adequately ventilated. Covering the product affects air flow,
which can trap heat and redirect it back to the product. This may affect product performance, and poses a
possible risk of fire or explosion, which could lead to serious bodily injuries or property damage.

REGULATORY & COMPLIANCE INFORMATION
FCC DECLARATION OF CONFORMANCE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and the receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio TV technician for help.
For more information, refer to the online help system on Razer.com.

FCC CAUTION

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
Any changes or modifications not expressly approved by party responsible for compliance could void the
user authority to operate this equipment.

Hearing Aid Compatibility Information (HAC)

Your phone is compliant with the FCC Hearing Aid Compatibility requirements.
The FCC has adopted HAC rules for digital wireless phones. These rules require certain phone to be tested and rated under the
American National Standard Institute (ANSI) C63.19-2011 hearing aid compatibility standards. The ANSI standard for hearing aid
compatibility contains two types of ratings:
M-Ratings: Rating for less radio frequency interference to enable acoustic coupling with hearing aids.
T-Ratings: Rating for inductive coupling with hearing aids in Tele coil mode.
Not all phones have been rated, a phone is considered hearing aid compatible under FCC rules if it is rated M3 or M4 for acoustic
coupling and T3 or T4 for inductive coupling. These ratings are given on a scale from one to four, where four is the most compatible.
Your phone meets the M3/T4 level rating.

However, hearing aid compatibility ratings don't guarantee that interference to your hearing aids won't happen. Results will vary,
depending on the level of immunity of your hearing device and the degree of your hearing loss. If your hearing device happens to
be vulnerable to interference, you may not be able to use a rated phone successfully. Trying out the phone with your hearing
device is the best way to evaluate it for your personal needs.

This phone has been tested and rated for use with hearing aids for some of the wireless technologies that it uses. However, there
may be some newer wireless technologies used in this phone that have not been tested yet for use with hearing aids. It is important
to try the different features of this phone thoroughly and in different locations, using your hearing aid or cochlear implant, to
determine if you hear any interfering noise. Consult your service provider or the manufacturer of this phone for information on
hearing aid compatibility. If you have questions about return or exchange policies, consult your service provider or phone retailer.

Hearing devices may also be rated. Your hearing device manufacturer or hearing health professional may help you find this rating.
For more information about FCC Hearing Aid Compatibility, please go to http://www.fcc.gov/cgb/dro.

RF Exposure Information (SAR)

This device has been tested and meets applicable limits for Radio Frequency (RF) exposure. Specific Absorption Rate (SAR) refers to
the rate at which the body absorbs RF energy. SAR limits are 1.6 Watts per kilogram (over a volume containing a mass of 1 gram of
tissue) in countries that follow the United States FCC limit, and 2.0 W/kg (averaged over 10 grams of tissue) in countries that follow the
Council of the European Union limit. Tests for SAR are conducted using standard operating positions with the device transmitting at its
highest certified power level in all tested frequency bands.

To reduce exposure to RF energy, use a hands-free accessory or other similar option to keep this device away from your head and
body. Carry this device at least 15 mm away from your body to ensure exposure levels remain at or below the as-tested levels. Choose
the belt clips, holsters, or other similar body-worn accessories which do not contain metallic components to support operation in this
manner. Cases with metal parts may change the RF performance of the device, including its compliance with RF exposure guidelines,
in a manner that has not been tested or certified, and use such accessories should be avoided.

The highest FCC SAR values for the device are as follows:

(Head) 0.94 W/kg @1g
(Body) 1.12 W/kg @1g

The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. SAR information on this device is on file with the FCC and can be found under the
Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: RWO-RZ350259.

INDUSTRY CANADA INFORMATION

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.

Avis d’industrie Canada

Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation
est autorisee aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible d'en
compromettre le fonctionnement."

Industry Canada Class B Emission Compliance Statement

Avis de conformite a la reglementation d’Industrie Canada

This Class B digital apparatus complies with Canadian CAN ICES-3(B) / NMB-3(B).
Cet appareil numerique de la classe B est conforme a la norme CAN ICES-3(B) / NMB-3(B) du Canada.

The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to
co-channel mobile satellite systems;