Raytek RAYGPR, RAYGPR-CF, RAYGPR-SF, RAYGPC, RAYGPCM Data Sheet

...
RAYTEK® COMPACT SERIES
GP
Noncontact Temperature Measurement for Industrial Applications
GP Highlights
Measurement Specifications
Temperature range from -18°C to 538°C
(0°F to 1000°F)
large 4-digit display
Monitor and sensor functions configured
on front panel
Signal processing capabilities typically found
on much larger systems
Adjustable emissivity and T-ambient
parameters
Universal 110–220 VAC power included
User-defined 4–20 mA or thermocouple
output (J, K, E, N, R, S, T)
Adjustable dual setpoints, deadband alarm
outputs and optional mechanical relays
Choice of sensing head to match application
requirements
Field interchangeable sensing heads
Standard and close focus optics available
Accessories for cooling and air purging
GPS Laser Sighted Head w/ 50:1
optical resolution
Monitor with Sensing Head
Spectral Response GPR/GPS 8 to 14 microns
Temperature Range GPR/GPS -18°C to 538°C (0°F to 1000°F)
System Accuracy (mA output) ±1% of measured value or ±1°C (2°F),
whichever is greater *
System Repeatability ±0.5% of measured value or
±1°C (2°F) whichever is greater
Response Time (95%) GPR/GPS 300 mSec
Emissivity
Signal Processing Peak and valley hold (up to 998 sec,
* (@ 23°C ±5°C (73°F ±9°F)
0.1 to 1.09 digitally adjustable increments of .01
999=infinite hold with external reset). Variable averaging filter (up to 60 seconds). T-ambient: fixed background ambient temperature compensation
Nominal Optical Specifications
GPR Sensing Head Optical Charts
RAYGPRCF RAYGPRSF
The GP Series is a versatile, two-piece temperature monitoring system that combines a compact, value-priced monitor with an infrared sensing head. The heart of the system is the 1/8 DIN GP monitor which provides advanced infrared processing capabilities including peak and valley hold, averaging, and a user-adjustable offset. The rugged Thermalert GPR sensor is available with standard or close focus optics, and provides target temperature readings with 1% accuracy.
Along with its large 4-digit LED display, the monitor provides a user-defined 4–20mA or thermocouple output. Two adjustable setpoints/deadbands control 5V alarm outputs or optional 3A mechanical relays. The GP monitor accepts universal 110–220 VAC power, and provides a 24 VDC/50 mA excitation voltage for loop power to external sensors. All monitor functions are configured via the front panel, including °C/°F switching.
The GP monitor provides adjustable emissivity and ambient compensation when used with the GPR/GPS infrared sensors. These high performance, 8–14 micron sensors, combine current loop driven signals with high resolution optics.
The GP monitor also works with other Raytek infrared sensors, including the CI, TX, MI and Marathon Series sensors.
GPS Sensing Head Optical Charts
RAYGPSCFL
RAYGPSSFL
(NOTE: nominal spotsize based on 90% energy)
Electrical Specifications
Power Supply 110/220 VAC, ±20%, 50–60 Hz
Inputs User configurable inputs for GPR, GPS, any
0-5 V or 4-20 mA sensor, or thermocouple (J, K, E, N, R, S, T) External reset input to reset peak/valley hold
Outputs 4-digit, 7 segment LED display, °C/°F selectable
User configurable 4-20 mA current or thermocouple output (J, K, E, N, R, S, T) Two adjustable setpoints with deadbands controlling +5 V alarm outputs or optional 3A mechanical relays 24 VDC/50 mA excitation voltage
Sensor Specifications
E nvironmental Rating:
GP monitor front panel IP 54 (IEC 529); NEMA-12 GPR/GPS sensing head IP 65 (IEC 529); NEMA-4* * GPR/GPS rated with adapter and compression fitting
A mbient Temperature Range:
GP monitor 0°C to 50°C (32°F to 120°F) G PR/GPS sensing head 0°C to 65°C (32°F to 150°F)
GPS laser shuts off automatically at 50°C (120°F)
with optional water cooling with optional air cooling 0°C to 120°C (32°F to 250°F)
Storage Temperature -30°C to 65°C (-22°F to 150°F)
Relative Humidity 10 to 95%, non-condensing
GP Monitor Dimensions 1/8 DIN x 120 mm (1.75 x 3.63 x 4.75 in)
GP Monitor Weight 320 g (0.7 lbs)
Physical Ratings GPR/GPS vibration MIL-STD-8100, (IEC 68-2-6): 3 G's, 11 to 200Hz any axis GPR/GPS shock MIL-STD-8100, (IEC 68-2-27): 50 G's, 11 msec any axis
0°C to 177°C (32°F to 350°F)
Accessories Options
Sensor Dimensions
GPR Sensing Head
GPS/GPR Sensing Head
GP Monitor
Accessory mounting bracket for sub-panel installation
(XXXGPACFB)
Accessory solid state relays, 10 Amp AC
(X XXGPSSRAC)
Optional 3A mechanical relays
(RAYGPCM must be specified at time of order)
GPR/GPS Sensors
Accessory air purge collar to keep lens clean (XXXTXXACAP)
Accessory conduit adapter, adapts sensor threads to .5 in.
NPT (XXXTXXACCA)
Accessory pipe adapter, adapts sensor threads to 1.5 in.
NPT (XXXTXXACPA)
Accessory right angle mirror, provides perpendicular view of
target in tight installations (XXXTXXACRA)
Optional air/water cooled housing for installation in
environments up to 177ºC (350ºF)
Optional NIST traceable calibration certificate
A B
Model Description
RAYGPR
Raytek Noncontact Temperature Sensor
Code A Focus Option
SF GPR standard focus sensing head with 8-14 micron spectral response and 35:1 optical resolution
CF
GPR close focus sensing head with 8-14 micron spectral response, 3 mm (.1") and 35:1 spot size at 76 mm (3") distance
Code B Options (must be specified at time of order)
W Air/Water coolable housing includes air purge collar C 7-pin DIN connector instead of 5-pin bayonet connector
RAYGPS
Focus
Option
Model Description
RAYGPS
Raytek Noncontact Temperature Sensor
Code A Focus Option
SFL GPS standard focus sensing head with 8-14 micron spectral response and 50:1 optical resolution
CFL
GPS close focus sensing head with 8-14 micron spectral response, 4.5 mm (.18") and 35:1 spot size at 200 mm (8") distance
Code B Options (must be specified at time of order)
W Air/Water coolable housing includes air purge collar
Options
Model Description
RAYGPC
RAYGPCM
GPC panel mount meter with standard 5 VDC alarm outputs, 110/220 VAC power
GPC panel mount meter with 3A mechanical alarm relay outputs, fully isolated electrical inputs and outputs, 110/220 VAC power
The Worldwide Leader in Noncontact Temperature Measurement
Raytek Corporation Worldwide Headquarters
Santa Cruz, CA USA Tel: 1 800 227 8074 (USA and Canada, only) 1 831 458 3900
solutions@raytek.com
European Headquarters China Headquarters
Berlin, Germany Beijing, China Tel: 49 30 4 78 00 80 Tel: 8610 6438 4691
raytek@raytek.de info@raytek.com.cn
To find a Raytek office near you, please visit www.raytek.com
Worldwide Service
Raytek offers services, including repair and calibration. For more information, contact your local office or e-mail support@raytek.com
www.raytek.com
Raytek and the Raytek logo are registered trademarks of Raytek Corporation.
© 2010 Raytek Corporation ( 3111632 Rev. I) 11/2010
Specifications subject to change without notice.
Loading...