Page 1
84 Professional
Page 2
84 PROFESSIONAL - IN A CATEGORY ALL ITS OWN
MICROPROCESSOR
control is more precise than
mechanical systems. It
controls temperatures for pool
and spa settings and stores
diagnostic information for
service technicians.
HEAT EXCHANGER
with brass header and cupronickel tube for maximum
protection against the
toughest pool applications.
Excellent for salt chlorine
generated pools.
CUPRO-NICKEL FIN TUBE
is at the heart of the Raypak 84
Professional heater. The
competition doesn’t stand a
chance against its fat .065
tubing walls. Raypak also uses
integral fin tube, meaning it’s all
one piece of material.
STAINLESS STEEL
is used liberally throughout the
84 Professional pool heater.
aypak spared no expense to
R
ensure that any area that could
be compromised by harsh
environments would stand the
test of time.
PLUMBING CONNECTIONS
are included for a complete
and professional looking
installation. CPVC stub outs
and half union connectors
supplied. No need to buy
additional fittings.
DIRECT SPARK IGNITION
High voltage spark provides a
quick and smooth burner light
o≠. Flame sensing and
rectification are provided by the
spark electrode and built-in
sensing probe.
DIRECT VENT CAPABLE
The 84 Professional o≠ers true
application flexibility. Flue
exhaust can be vented up to 80
feet without the use of an
extractor. Inlet air can be
ducted through 4” steel or PVC
tubing.
FLOW SWITCH, T&P and PRV
This makes the unit 50 state
ASME compliant right out of the
box. Also, having a flow switch
eliminates possible “false” water
flow issues from elevated pools.
WIRING SHEATH
is standard construction on all
exposed wiring. This helps
prevent rodent damage and
other associated issues that
can damage the wiring. Not to
mention it looks very clean and
tight.
84% EFFICIENCY
The 84 Professional is listed at
84% thermal e∞ciency. This
provides the highest e∞ciency
in a non-condensing appliance.
The 84 Professional is also low
NOxcompliant in all 50 states.
ROBUST BURNER
Our single burner design
provides 360° of smooth and
stable combustion. The all
stainless steel burner is built to
last and operates precisely with
as little as 4”w.c. of supply gas
pressure.
WARRANTY
The Raypak Professional is
unmatched in warranty for
commercial applications: Three
years parts and labor. We stand
behind what we believe in.
Page 3
NO ONE PUTS MORE INTO THEIR POOL HEATERS
Introducing the Raypak 84 Professional series pool heater, designed specifically for commercial
properties such as apartments, condos, hotels, motels, schools, parks, community and high-end
private pools. It’s also the perfect heater for tough coastal weather conditions where salt air
challenges durability. When your reputation is on the line every day, you’ve got to work smart and
come prepared with strength, experience, and the guts to lead the way. In a word, it demands a
Raypak Professional series pool heater.
OUTDOOR TOP
DIGITAL CONTROL
BLOWER
GAS VALVE
T&P GAUGE
FLOW SWITCH
IGNITER
BURNER
CUPRO-NICKEL FIN TUBE
PROFESSIONAL HERITAGE
Built by a company dedicated to water heating, and refined
through more than six decades of year-round demanding use in
commercial boiler rooms, Raypak heaters embody the durability,
longevity and flexibility that the true pool professional expects.
Many of the 84 Professional pool heater features come directly
from our years of commercial boiler experience. This knowledge
and experience is unmatched in the pool heating industry.
PRESSURE RELIEF VALVE
2” CPVC WATER
CONNECTIONS
A
SME BR
A
SS HEADER
Page 4
R
e m o t e
W
a t e r
6 9 F
T
e m p
P
o o l
104F
S
p a
S
e t
S
e n s o r
1 0 4 F
F
a i l u r e
S
p a
S
e t
H
e a t i n g
1 0 4 F
S
p a
S
e t
N
o
1 0 4 F
D
e m a n d
S
p a
S
e t
H
i
1 0 4 F
L
i m i t
F
a u l t
1
S
u p p l y
V
o l t a g e
2 8 . 2
F
l a m e
S
t r e n g t h
G
o o d
8
R
u nTi m e
C
y c l e s
134
1 0 0
h
S
p a
S
e t
L
o w
1 0 4 F
V
o l t a g e
A DIGITAL CONTROL SO SOPHISTICATED, YET SO SIMPLE TO USE
IN
IN
OUT
OUT
IN
OUT
IN
IN
IN
IN
OUT
OUT
OUT
OUT
IN
IN
OUT
Microprocessor-Controlled Thermostat
The Raypak 84 Professional gas heater is
equipped with a microprocessor-based
control. This control allows you to set your
your preferred setting just by pressing an up or down temperature
ontrol button. The digital display tells you
c
when the water is being heated and notifies you when your target temperature has
been reached.
Self-Diagnostic
and the service professional know what is
going on with the heater at all times. The
display uses real English, with no cryptic
codes to decipher.
Remote-Compatible
Raypak 84 Professional and be integrated into the pool control
system of your choice. The display clearly shows the heater is
under control of a remote system.
Run Time and Cycle Meter
sional. Multi-unit installations can monitor the run time of each
unit and balance out the duty load, thus avoiding over working
one individual heater.
pool and spa temperature precisely at
Troubleshooting a Raypak gas heater has
ever been easier. The Raypak Profes-
n
sional has on-board diagnostic controls
that let the user
The Raypak 84 Professional is compatible
with most major pool controls and remote
systems on the market today. Any two- or
three-wire remote can connect to the
In yet another industry first, the Raypak
pool heater can report how long it has run
and how many times it has fired. This is
valuable feedback for the service profes-
Flame Strength Indicator
aypak leads the way with the first
R
control in the pool industry to monitor and measure the flame signal.
edge commercial boilers, it just made sense for Raypak to
use this existing commercial technology on our residential
pool heaters. This little tool is a service tech’s dream. Raypak also uses this function on the end-of-line test, making
sure every heater leaves with a robust flame signal.
Known for our high quality, leading
On Board Voltmeter
The Raypak 84 Professional monitors the low voltage electrical supply from the transformer. This helps
during installation. The heater will also let you know if the
voltage has dropped too low to
function properly. No other pool
heater takes care of you like a Raypak.
ensure the heater is wired properly
INSTALLATION FLEXIBILITY
Multiple Venting Options
The 84 Professional offers the most venting options of any
gas pool heater on the market today. The unit is shipped
from the factory in an outdoor top-vented configuration, but
can be top or rear vented for indoor or outdoor installations.
The heater can also be installed with 4” PVC or metal pipe
duct to bring fresh combustion air from outside the equipment room. This is absolutely the perfect solution when
chemicals are stored in the equipment room.
Multiple Plumbing Options
Another industry first from Raypak - 4 possible water connection configurations. Not only do you have right handed
and left handed options, but now you have through-the-cabinet options as well. You can place the heater in series with
your equipment plumbing. The clean, straight piping eliminates or reduces the number of elbows needed, offering
you the lowest possible pressure drop. The 84 Professional
comes with all of the necessary CPVC plumbing fittings to
hook up to your 2” PVC system piping.
Page 5
THE HEART AND SOUL OF THE RAYPAK 84 PROFESSIONAL
Rust-Free Waterways
Raypak has applied its years of commercial boiler experience to the design of this new brass header. A metal header
design allows for the higher working pressures required by ASME. Only after the material meets the stress analysis and
metal composition tests is it approved for use in an ASME unit.
ASME Cupro-Nickel Fin Tube
The Raypak 84 Professional is designed
specifically to meet State and local code
requirements for public pools and commercial applications. The heater is equipped
with a thicker walled fin tube allowing it to
meet the ASME requirements. The Raypak
84 Professional comes standard with a
cupro-nickel fin tube heat exchanger for
added protection against aggressive water
chemistry. Although rare, there are certain
applications, like health club spas, where
copper is just not the best choice. Cupronickel offers superior tolerance to bad and
fluctuating water chemistry, thanks to a
harder surface and a thicker walled fin tube.
Cupro-nickel has also shown superior corrosion resistance in salt chlorine generated
pools.
Brass header and Cupro-nickel tube-standard
THE MYSTERY OF ASME UNCOVERED
The Raypak 84 Professional heater
comes standard as an ASME stamped
unit. Raypak has state inspectors on-site
daily performing inspections for our pool
heater and commercial boiler production
that require ASME. Being in the boiler
business for over 60 years truly makes
Raypak the leader for your commercial
needs. Why ASME? Most local codes require that public pools, pools that are in
condominiums, apartments, or other
commercial applications, be in compliance with ASME Section IV.
On-site state inspectors
ASME
stands for
group which sets many industrial and manufacturing standards. A pool heater
that is made to ASME standards must conform to a set of specifications as
determined by ASME, specifically in relation to the operating water pressure
the appliance can handle. Each and every ASME heat exchanger that goes
into a Raypak Professional heater is inspected by a state inspector to make
sure it complies with ASME Code for pool heaters.
American Society of Mechanical Engineers
, a non-profit
That’s why Raypak is the only pool heater manufacturer to supply a flow
switch, PRV and T&P gauge standard with every Professional series gas
heater under 400MBTU. We know what it takes to make a unit 50-state ASME
compliant right out of the box. Does your heater company make sure all the
little details are taken care of like Raypak does?
Flow switch, PRV and T&P gauge-standard
Page 6
TM
Technical Data
84 Professional Gas Pool Heaters
Amp Draw
120 volt 240 volt
2 1
Shipping
Weights (lbs)
w/ Brass Headers
and Stackless Top
Heater
Model
BTUH
Input
(000)
(B)
Flue
Diameter
(C)
Air Inlet
Gas
Connection
Water
Connection
Minimum
Flow (gpm)
Maximum
Flow (gpm)
R259 250.0 6” 4” 3/4” 2” 25 125 168
R409 399.0 6” 4” 3/4” 2” 40 125 180
Designation for a Professional heater using propane gas is “EP”; a Professional heater using natural gas is “EN”.
Prefix “B” is for brass (ASME) headers.
Suffix “X” is for cupro-nickel tubing
Example: B-R409-EN-X = Brass headers, 409 model size, digital, natural gas, cupro-nickel
Reduce input 4% for each 1000 feet above sea level when installed above 2000 feet elevation.
Manufactured under Patent No. 3,623,458.
Heater can be installed directly on a combustible surface.
Flue gases must be properly vented with 6” CAT I vertical venting or CAT III horizontal venting
Inlet air can be ducted with 4” metal or PVC pipe-See I/O manual for complete venting details
Raypak, Inc. 2151 Eastman Avenue, Oxnard, CA 93030, (805) 278-5300. Fax (800) 872-9725 www.raypak.com
Litho in U.S.A. ©2011-2013 Raypak, Inc. Catalog No. 6200.16F Effective: 03-15-13
The Pool and Spa Heating Experts
sm
Loading...