Raymarine RUDDER User Manual
Parallel
D6289-1
D6290-1
x3
Parallel
Optimum 140 mm (5.5 in)
90˚
Min, 75 mm (3 in),
Max, 310 mm (12 in)
x3
DXXXX-1
Centre line
for rudder sensor
2.
x2
Rudder
Amidships
x2
3.
87012-1
D6286-1
Drill
+44 (0) 23 9269 3611
Toll Free: 800-539-5539
+1 603-881-5200
www.raymarine.com
Hacksaw
Cable
D6288-1
inch) drill
8
/
1
3 mm (
Pozi-drive
Stud
screwdriver
Pencil
Tiller pin
Measure
No 8 x ¾ inch
Ball joint (x2)
inch
Pan head screw (x3)
TEMPLATE OTHER SIDE
Check
Check
Parallel
Optimum 140 mm (5.5 in)
Parallel
Centre line
for rudder sensor
Parallel
Check
Parallel
Min 75 mm (3 in) Max 310 mm (12 in)
90˚
+/-- 5˚ MAX.
RUDDER POSITION SENSOR
INSTALLATION GUIDE
Parts Supplied Tools Required
Rudder
position
sensor
Nut (x2)
Countersunk head screw (x2)
No 8 x ¾
Raymarine Ltd, Portsmouth, Hampshire, UK PO3 5TD
Raymarine Inc. Nashua, NH 03063-4219, USA
Recyclable Material - Please dispose of responsibly.
Center the rudder
Centrer le gouvernail
Ruder zentrieren
Centro del timón
Check
1. Installation Checks
Centrare il timone
Rudder
Amidships
Check
D6287-1
Cable
Center the rudder
Centrer le gouvernail
Check
Ruder zentrieren
Centro del timón
Centrare il timone
D6293-1
amidships
positioned
Rudder
travel: +/- 60˚
permitted
Maximum
(3 positions)
diameter hole
Drill 3 mm (1/8 in)
Check
Parallel
Rudder
Amidships
Parallel
Centre line
for rudder sensor
Raymarine
Autopilot
Commissioning
Guide
Refer to Autopilot Manual
Se référer au manuel de pilote automatique
Siehe Handbuch Autopilot
Refiérase al manual del piloto
Fare riferimento al manuale dell'autopilota
Mounting Template
Cable position
x3
Cable
D6291-1
6.
Check
Cable
Center the rudder
Centrer le gouvernail
Check
Ruder zentrieren
D6292-1
Centro del timón
Centrare il timone
(not supplied)
or
x2
60˚
Rudder
Amidships
Centre line
for rudder sensor
Step 1
X mm
Parallel
Rudder
Amidships
Parallel
Centre line
for rudder sensor
X mm -- 28 mm
4.
Step 2
5.
Loading...