Raymarine PLUS 7INCH User Manual

GAIN

Not used in Chart mode.

VRM/EBL

Use to measure range and bearing to/between points.

- Position cursor at start point, and press VRM/EBL key to display the Ruler data box. Select end point using trackpad, and press ENTER to fix end position of ruler.

Chartplotter

DISPLAY

Controls display mode and windows.

- Press for display mode and soft keys display.

- Press again to toggle through display modes, then ENTER.

- Press and hold for 2 seconds for full screen display.

WINDOWS

OFF ON

Press soft keys to toggle window on/off and to select lower window. Press ENTER to finish.

SELECT

WINDOWS

MULTI

Controls display lighting and contrast.

- Press to display sliders.

O F

60%

LIGHT CONTRAST

Select a slider using the soft key or trackpad. Toggle between off/on by pressing the soft key again. Adjust slider using trackpad, and press ENTER to finish.

ALARMS

Use to set up the chartplotter alarms.

- Press to display the Alarms set up menu and soft keys, the soft keys correspond to the selected alarm.

ALARMS SET UP

ARRIVAL ALARM 0.01nm

OFF TRACK ALARM

ANCHOR ALARM

COUNTDOWN TIMER

ALARM CLOCK

SELECT ARRIVAL

ALARM RADIUS

OFF

00:33:00

OFF

Soft Key Labels:

Change when you press a key.

Default soft key labels are shown.

ROUTE GOTO SCREEN

Soft keys

Press to select option, or slider. Labels change when you press soft/dedicated key. Elipses (...) after the text indicate that pressing soft key leads to a further display of soft key options.

ENTER Confirms selection and (if appropriate) clears current soft key labels. It performs the selected task, accepts changes, or displays more options. When cursor text is displayed, takes cursor control of the object. When arrow-head cursor symbol is displayed, drops the object under cursor control.

CLEAR Cancels operation in progress and returns to the previous display. Deletes an object/function under cursor control.

Trackpad

Controls cursor position and the slider values. Hold the trackpad down to move the cursor faster.

FIND SHIP

MARKS / MOB Controls waypoints, and Man Overboard function.

- Press to display waypoint soft keys.

- Press and hold for 2 seconds to activate or cancel MOB.

PLACE WPT

WAYPOINT

AT CURSOR

AT VESSEL

Press soft key to place waypoint at cursor or vessel, or display the waypoint list/user card menu and asscociated soft keys. Press ENTER to finish.

RANGE

Controls chart scale. Displayed vertical distances shown in the Status Bar.

- Press top of key to increase the chart distance.

- Press bottom of key to decrease the chart distance.

- Press and hold to change the scale faster.

Provides access to setup options.

- Press to display

Press soft key to display required setup menu, then use trackpad to select option and soft key to change option. Press ENTER to close menu, and CLEAR to finish.

SYSTEM

SET UP¬

soft keys.

SET UP¬

CHART

LIST

TRACK

SET UP¬

LOAD/SAVE USER CARD

GPS

SET UP¬

Use the trackball to select the alarm, then use the softkeys to adjust parameters and/or toggle the alarm on/off. Press ENTER to finish.

POWER

Press and hold until unit beeps to turn on display. Press for 3 seconds to turn off display.

Quick Reference Card: PLUS Series Mono LCD Chart Display

86057_2

D5704-1

Default Display

Chart Range

Chart Boundary

Waypoint

Object data box -

for object selected by cursor

ROUTE

MAKE

ROUTE

EDIT

ROUTE

CLEAR ROUTE

Soft Keys

Use the soft keys to set up a series of waypoints as a route. Use the trackpad to move the cursor then press PLACE WAYPOINT, and/or select a waypoint from the Waypoint List. Continue until the route is complete. Press ACCEPT ROUTE to finish.

Use the softkeys to edit the current route. Press UNDO WAYPOINT to remove the last waypoint in a route. Press PLACE waypoint and/or select a waypoint from the Waypoint List, to add a waypoint at the end of the route. Press ACCEPT ROUTE to finish.

Default soft key labels

These can be turned off: press any soft key to redisplay them. Different labels are displayed when you press a key.

PLACE

UNDO

WAYPOINT

PLACE

WAYPOINT

UNDO

WAYPOINT

ROUTE

USE WPT

LIST

USE WPT

LIST

Status Bar

Vessel Position

Cursor -

selecting chart object

Depth Area

Cursor position box

Shows the current cursor position as either Range/Bearing or Lat/Long. You can move this box to your preferred position on the screen or turn it off.

ROUTE

REVERSE

ROUTE

SAVE

ROUTE

LIST

Context Sensitive Cursor Control

When the cursor is positioned over special features on the display, a text label appears to identify the feature. Depending on the feature, you can then move, re-size or delete it.

MORE¬

Press to reverse the waypoint order in the current route.

Use to save and name the current route.

Soft Keys

SHOW

ROUTE

ERASE ROUTE

NAME ROUTE

YES NO

ROUTE

INFO

Move (for example, a waypoint)

WPT

WAYPOINT

NAME

ROUTE

GOTO

CURSOR

ROUTE

Text Label

A-B BOX COG HDG MOB MRK POS RTE TIDE WPT

Feature

Ruler line Data box (any type) Course Over Ground Vector Heading Vector Man OverBoard Marker Mark Vessel's Position Route Leg Tide Vector Waypoint

Delete (for example, a waypoint)

WPT

Soft Keys

GOTO

WAYPOINT

Use to navigate to a waypoint selected from the waypoint database list. Use the trackpad to select the waypoint then press the soft key to start the GOTO.

STOP GOTO

Press to navigate to the cursor position. When you press GOTO CURSOR, a temporary waypoint is added at the cursor position and the GOTO is started. Press STOP GOTO to cancel.

RESTART

STOP

GOTO

CURSOR

WAYPOINT

XTE

ADVANCE

Press to clear the current route from the display, if it is not saved you are prompted to save the route.

Use the soft keys to manage the route database list. Use the trackpad to select a route then press the required softkey.

Press to follow the current route. Use the softkeys to cancel the follow, or to modify the route whilst it is being followed

D5709_1