Raymarine E46034 User Manual
RAY48
E46034 Flush Mounting Kit
for Ray48 & Ray54/E
5583-002 Flush Mount Assembly
Bracket Subassembly, qty 2
Gasket, 1 ea, Ray48 & Ray54/E
Screw, M6, qty 2, and
Lock Washer, M6, qty 2
RAY54
Pre-punched gaskets sheet
1. Use template to cut out required opening in console.
2. Remove appropriate Gasket from pre-punched sheet
and place on radio, behind front fascia.
3. Insert unit into cutout in console.
4. Attach both Bracket Subassemblies to radio using M6
Screws and Lock Washers.
5. Tighten Bracket Subassembly mounting screws until
unit snugly attached to console.
172 mm (6.8") ALLOWANCE FOR FLUSH MOUNT KIT
135 mm (5.3") CUTOUT
8.5 mm (.33")
10 mm (.4")
70 mm
(2.75")
Ray48 Mounting Template
CUT OUT SHADED AREA
RAY48 VHF RADIO
ALLOW 110 mm (4.3") FROM RADIO MOUNTING SURFACE FOR RADIO DEPTH.
190 mm (7.5") ALLOWANCE FOR FLUSH MOUNT KIT
150 mm (5.9") CUTOUT
51 mm (2")
CUTOUT
9 mm (.4")
18.5 mm
(.73")
8 mm (.3")
79 mm (3.1")
Ray54/E Mounting Template
CUT OUT SHADED AREA
167 mm (6.6")
8 mm (.3")
61 mm
(2.4")
CUTOUT
10 mm (.4")
20 mm
(.8")
3033-010
Loading...