Raymarine E32002 User Manual
Distributed by
Any reference to Raytheon or
RTN in this manual should be
interpreted as Raymarine.
The names Raytheon and RTN
are owned by the
Raytheon Company.
Raystar 112LP
GPS T ransducer
Installation Guide
Covers:
E32001 SeaTalk Version
E32002 NMEA Version
Raystar 112LP GPS Transducer Installation
IMPOR T ANT NOTICE
This device is only an aid to navigation. Its accuracy can be affected
by many factors, including equipment failure or defects, environmenÂtal conditions and improper handling or use.
It is the user’s responsibility to exercise common prudence and
navigational judgement, and this device should not be relied upon as a
substitute for such prudence and judgement.
Package Contents
Checking your Raystar 112LP Package
The Raystar 112LP package contains the following standard items:
1. Low profile GPS receiver
2. Flush mount gasket
3. Mounting studs & Thumb nuts (x2)
4. Pole mount attachment
5. Screws (M4) for pole mount attachment (x2)
6. Installation Guide including Warranty document
Items Missing?
If any of the above items are missing or damaged, please contact your
Raytheon dealer or our Product Support Department to obtain
replacement parts. Please note that missing or damaged items
cannot be replaced without proof of purchase.
Registering this Product
Once you have checked that you have all of the listed components,
please take the time to complete the warranty document and return it
to your national distributor.
By returning this document you will receive prompt and expert
attention should you ever experience any difficulties with this product.
Also, your details are added to our customer database so that you
automatically receive new product brochures as and when they are
released.
Raystar 112LP GPS Transducer Installation
Summary of Features
Receiver type: 12 Parallel channels
Frequency: 1575.42 MHz +/- 1 MHz
(C/A code), L1
Sensitivity: -130dBm
Signal acquisition: Automatic
Time to first fix: 15 minutes maximum,
typically 2 minutes
Position accuracy: 15m RMS. (L1, C/A code
HDOP <2.5 without SA)
Speed accuracy: 0.5m/s RMS. (L1, C/A code
HDOP <2.5 without SA)
Geodetic Datum: WGS-84
(190 alternatives programmable)
Cable length: 10m (33ft)
Operating Temp.: -10 to 700C (14 to 1580F)
Storage Temp.: -10 to 700C (14 to 1580F)
Data Input/Output:
NMEA Version NMEA0183 V2.3 Output
Non-isolated NMEA Input
RTCM SC-104 Version 2.1 Input
SeaTalk Version SeaTalk Bus
RTCM SC-104 Version 2.1 Input
Memory Backup: Lithium battery (10 year life)
Disposal Note: Care should be taken when disposing of this equipment as a Lithium
battery is fitted internally.
Local regulations may apply and must be adhered to.
Loading...