RANDELL 8225-32-7 User Manual

PROJECT NAME:

LOCATION:

ITEM NO:

WORKTOPS/UNDERCOUNTERS

SIDE MOUNT WORKTOP

Self-contained stainless steel worktop refrigerator or freezer unit with 3” high backsplash.
Randell mullion blower coil, with thermostatic control, cools pans and/or base, and allows for
use of optional pans in the full depth interiors. R-134a expansion valve refrigeration system
in refrigerators, (R-404a in freezers) both are CFC free. Units with lift-off louver, condensate
evaporator, “CFC free” foamed in place insulation and 6” high adjustable legs. Cordset for
115V operation.

AVAILABLE MODELS:

9215-32-7
9215-32-7F
9205-32-7
9205-32-7F
9235-32-7
8225-32-7

STANDARD FEATURES:

• Side mounted compressor with mullion “Turbo” coil

provides proper pan cooling, and “full depth” usable
interior space

• R-134a refrigerant in refrigerators and R-404a in

freezers both are “CFC free”

• Exterior stainless steel top & front

• Foamed in place “CFC free” urethane insulation

• Self-closing doors with exclusive press-fit magnetic

gaskets

• Expansion Valve

• Condensate evaporator

• Cord and plug for 115 volt operation

• 6” high adjustable legs

• One piece stainless steel worktop and a 3” high

stainless steel, integral backsplash

CABINET EXTERIOR: Cabinet body is constructed

of all metal. The top, front, and louver panel are stainless
steel. Bottom & back of unit are corrosion resistant steel.
Sides are stainless steel. Worktop refrigerators and
freezers with 1 1/2” square nosing and 3” high
backsplash. Door opening frames are ABS and contain
magnetic strip for positive seal of door gaskets. Work
surface to be at 36” work height with unit on (4) 6” high
legs with adjustable bullet feet.

CABINET INTERIOR: Interior of cabinet is

fully coved to meet N.S.F. standard #7. The Interior
bottom, back, and top are anodized aluminum with
coved corners for easy clean-up. The interior ends
are ABS. Durable shelf supports molded into sides.
Unit insulated with a minimum of 2.5” of CFC free,
foamed in place polyurethane.

DOORS: Stainless steel front with easy to

grasp recessed handles, mounted on heavy duty
concealed hinges. Hinges are all stainless steel
with bronze pivot pin in nylon bushing,. Doors
with foamed in place insulation, press fit magnetic
gaskets - (designed for installation & removal
without tools), and deep draw ABS interior liner for
maximum insulation value.

REFRIGERATION: Refrigerators utilize a CFC

free, R-134a Expansion Valve refrigeration system
that includes condensing unit, and thermostatic
control for operator adjustability. Compressor
housing to allow maximum airflow and permit
mounting of standard hot gas condensate
evaporator. Mullion coil, is coated to resist
corrosion, and offers maximum air flow. Freezers
utilizes R-404a refrigerant with an automatic,
self-defrosting system for blower coil. Freezer
models equipped with door frame heater element to
prevent gasket freezing. Units totally prewired and
to be supplied with 8’ cordset (NEMA 5-15P) for
115V operation.

ORIGIN OF MANUFACTURE:

Designed and manufactured in the United States.

QTY:

MODEL NO:

AIA NO:

SIS NO:

CSI SECTION: 11400

SHORT FORM: 9200-32-7 Side

Mount Worktops, Model 9215-32-7

OPTIONS/ACCESSORIES:

Stainless steel back panel
Tray racks for 24” or 27”

openings only
Refrigerated drawers
Overshelves
Casters
Export voltages available

Worktops/Undercounters

PPSPEC9200327 RevA

Revised 02/13

18" 18"

24" 24"

9200-32-7

*

27"REFRIG. 27"REFRIG.

LOU VERED
END PANEL

LOU VERED
END PANEL

48"

*

24"REFRIG. 18"REFRIG. 24"REFRIG.

84"

LOU VERED
END PANEL

60"

36"

LOU VERED
END PANEL

33"

1.57"

Drawings are to be viewed in the same order as the chart, one drawing to represent refrigerator and freezer units

72"

39"

Model L W H Doors Storage Cu. Ft. Shelves Cu. Ft. HP Volt Amps NEMA Ship Wt.

9215-32-7 48” 33” 36” (2)18” 11.58 9.5 1/3 115/60/1 9 5-15P 325

9205-32-7 60” 33” 36” (2)24” 16.21 13.5 1/3 115/60/1 9 5-15P 370

9235-32-7 72” 33” 36” (2)27” 20.01 20 3/8 115/60/1 9 5-15P 390

9225-32-7 84” 33” 36” (2)24”,(1)18” 23.16 20 3/8 115/60/1 9 5-15P 435

9215F-32-7 48” 33” 36” (2)18” 11.58 9.5 1/3 115/60/1 8.7 5-15P 325

9205F-32-7 60” 33” 36” (2)24” 16.21 13.5 1/3 115/60/1 8.7 5-15P 370

NOTE: When ordering casters, 6” casters equal 35” height; 4” casters equal 33” height

1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net

© 2013 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.