RANDELL 67345 User Manual
PROJECT NAME:
LOCATION:
ITEM NO:
CUSTOM
SC ICE CREAM CABINET MODEL 67345
Self-contained ice cream storage and dipping cabinet with R-404a cooling system. 16 gauge stainless steel
top, and integral backsplash with 45˚ return. Die-stamped openings in top with insulated lids. Stainless steel
fronts, stainless steel interior with welded-in-place refrigeration lines. 6” high adjustable and movable legs.
STANDARD FEATURES:
• Refrigeration system features “CFC free” R-404a
refrigerant, expansion valve for fast recovery and even
temperature regulation
• Superb low temperature unit for ice cream storage and
dipping
• Stainless steel interior allows double stacking of
standard 3 gallon containers
• Foamed in place “CFC free” urethane insulation
• Sink and dipper well available option
• 6” high legs—adjustable and movable
• 45˚ integral stainless backsplash is standard. 90˚
stainless backsplash is optional.
CABINET INTERIOR: Unit interior to be
stainless steel, with interior sides to be wrapped with
refrigerating lines held firmly in place with holding
clips welded to unit body. Unit insulation to be CFC
free foamed in place urethane.
REFRIGERATION: Cooling system to utilize
R-404a refrigerant, specify if otherwise. Expansion
valve and refrigeration lines provided and installed
for connection at unit rear. Syrup rail cooled by
refrigeration line installed and attached to sealed
stainless interior rail liner. Condensing unit control and
solenoid provided. Unit totally prewired to junction box.
QTY:
MODEL NO:
AIA NO:
SIS NO:
CSI SECTION: 11400
SC Ice Cream Cabinet. Model 67345
shown with optional s/s ends, hand
sink and dipperwell.
CABINET EXTERIOR: Top to be one piece of die
formed 16 gauge stainless steel with 2 5/8” nosing.
Backsplash to be coved cornered, with 45˚ return at
top and overall height of 6 3/4”. Ends at top fitted with
recessed heavy duty steel bars for field bolting units
together, producing a hairline seam. Top to have die
stamped cut-outs with raised rims, fitted with removable,
hinged, insulated lids. Exterior body to be corrosion
resistant steel. Front panels to be removable, constructed
of 22 gauge die-stamped stainless steel. Louver panel
to be die-stamped stainless steel. Work surface to be at
36” work height. Legs to be 6” high stainless steel with
adjustable bullet foot. Legs mounted to full length
channel frame assembly which is integrally welded to
bottom of body assembly. Legs can be moved left to right
to avoid floor obstacles during installation.
This equipment is intended for use in rooms having an
ambient temperature of 86˚F (30˚C) or less.
ORIGIN OF MANUFACTURE: Designed and
manufactured in the United States.
Custom
PPSPEC0142 RevB
Revised 08/15
LEGEND
AFF = ABOVE FIXED FLOOR
HP COMPRESSOR
HP
JUNCTION BOX 26" AFF
115V/60Hz/1Ph
8' LONG CORD SET
(NEMA 5-15P)
CONDENSATE DRAIN 1/2"
OC
PVC 10" AFF.
EXPANSION VALVE
V
20 AFF.
67345
36"
3
gal
3
gal
gal
gal
45"
3
3
EXPANSION VALVE
MTD.BELOW J-BOX
OC
6"
COMPR. HSG.
13"
HP
V
J
14"
42.75"
33"
33” Deep
Model No.
Length
Height*
Storage
67345
45”
36”
24 gal.
Capacity
H.P.
Volts
Amps.
NEMA
Ship Wt. (lbs)
1/3
115/60/1
6.5
5-15P
375
* All units on 6" high adjustable, movable legs for 35 1/2" to 36 3/4" high work surface.
© 2016 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.
888-994-7636, unifiedbrands.net
Loading...