RANDELL 67332 User Manual
Custom SC Ice Cream Cabinet models 67000
model 67332 67345 67357
Description:
Self-contained ice cream storage and dipping cabinet with R404a cooling system. 16 gauge stainless steel top, and integral
backsplash with 45˚ return. Die-stamped openings in top with
insulated lids. Stainless steel fronts, stainless steel interior with
welded-in-place refrigeration lines. 6" high adjustable and
movable legs.
Specifications:
CABINET EXTERIOR: Top to be one piece of die-formed 16 gauge
stainless steel with 2 5/8" nosing. Backsplash to be coved
cornered, with 45˚ return at top and overall height of 6 5/8".
Ends at top tted with recessed heavy duty steel bars for eld
bolting units together, producing a hairline seam. Top to have
die-stamped cut-outs with raised rims, fitted with removable,
hinged, insulated lids. Exterior body to be corrosion resistant
steel. Front panels to be removable, constructed of 22 gauge
die-stamped stainless steel. Louver panel to be die-stamped
stainless steel. Work surface to be at 36" work height. Legs to be
6" high stainless steel with adjustable bullet foot. Legs mounted
to full length channel frame assembly which is integrally welded
to bottom of body assembly. Legs can be moved left to right to
avoid floor obstacles during installation.
CABINET INTERIOR: Unit interior to be stainless steel, with interior
sides to be wrapped with refrigerating lines held firmly in place
with holding clips welded to unit body. Unit insulation to be CFC
free foamed in place urethane.
Shown with optional finished end, sink and dipperwell.
Standard Features:
• Refrigeration system features “CFC free” R-404a refrigerant,
expansion valve for fast recovery and even temperature
regulation
• Superb low temperature unit for ice cream storage and
dipping
• Stainless steel interior allows double stacking of standard 3
gallon containers
• Foamed in place “CFC free” urethane insulation
• Sink and dipper well available option
• 6" high legs—adjustable and movable
• 45˚ integral stainless backsplash is standard. 90˚ stainless
backsplash is optional.
REFRIGERATION: Cooling system to utilize R-404a refrigerant.
Expansion valve tted to refrigeration line with pressure control
installed for temperature control. Condensing unit sized and
installed for proper cooling in housing at right end. Unit totally
prewired and to be supplied with 8' cordset (NEMA 5-15P) for
115V operation.
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, unifiedbrands.net
Please reference our website for the most
updated product information and specifications.
Randell Custom, Page 27
PP SPEC0142 Rev. A
Revised 08/07
67000 Series
LEGEND
AFF = ABOVE FIXED FLOOR
HP COMPRESSOR
HP
JUNCTION BOX 26" AFF
115V/60Hz/1Ph
8' LONG CORD SET
(NEMA 5-15P)
CONDENSATE DRAIN 1/2"
OC
PVC 10" AFF.
EXPANSION VALVE
V
20 AFF.
36"
3
gal
3
gal
32"
3
gal
3
gal
3
gal
3
gal
45"
3
gal
3
gal
3
gal
3
gal
57"
3
gal
3
gal
EXPANSION VALVE
MTD.BELOW J-BOX
6"
COMPR. HSG.
13"
OC
HP
V
J
14"
42.75"
33"
SECTION VIEW
29" Deep Equipment
Length 32" 45" 57"
Height* 36" 36" 36"
Storage
Capacity 12 gal. 24 gal. 36 gal.
H.P. 1/3 1/3 1/3
Volts 115/60/1 115/60/1 115/60/1
Amps. 6.5 6.5 6.5
NEMA 5-15P 5-15P 5-15P
Ship Wt. 295 lbs. 375 lbs. 448 lbs.
33" Deep Equipment
Length 32" 45" 57"
Model No. 67332 67345 67357
Height* 36" 36" 36"
Storage
Capacity 12 gal. 24 gal. 36 gal.
H.P. 1/3 1/3 1/3
Volts 115/60/1 115/60/1 115/60/1
Amps. 6.5 6.5 6.5
NEMA 5-15P 5-15P 5-15P
Ship Wt. 295 lbs. 375 lbs. 448 lbs.
* All units on 6" high adjustable, movable legs for 35 1/2" to 36 3/4" high work surface.
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2009 Unified Brands. All Rights Reserved. DOVER® and the DOVER® Logo are registered
trademarks in the United States [and various other countries] of Unified Brands, a
wholly-owned subsidiary of Dover Corporation.
Loading...