RANDELL 66318 User Manual
Custom Remote Ice Cream Cabinet models 66000
0°F to -5°F 60°F to 180°F0°F to -5°F
some models
available
for -10°F
applications,
consult
factory
model 66318 66331 66343
Description:
Remote refrigerated ice cream storage and dipping cabinet. 16
gauge stainless steel top, and integral backsplash with 45˚ return.
Die-stamped openings in top with insulated lids. Stainless steel
fronts, stainless steel interior with welded-in-place refrigeration
lines. 6" high adjustable and movable legs.
Specifications:
CABINET EXTERIOR: Top to be one piece of die-formed 16 gauge
stainless steel with 2 5/8" nosing. Backsplash to be coved
cornered, with 45˚ return at top and overall height of 6 3/4".
Ends at top tted with recessed heavy duty steel bars for eld
bolting units together, producing a hairline seam. Top to have
die-stamped cut-outs with raised rims, fitted with removable,
hinged, insulated lids. Exterior body to be corrosion resistant
steel. Front panels to be removable, constructed of 22 gauge
die-stamped stainless steel. Louver panel to be die-stamped
stainless steel. Work surface to be at 36" work height. Legs to be
6" high stainless steel with adjustable bullet foot. Legs mounted
to full length channel frame assembly which is integrally welded
to bottom of body assembly. Legs can be moved left to right to
avoid floor obstacles during installation.
CABINET INTERIOR: Unit interior to be stainless steel, with interior
sides to be wrapped with refrigerating lines held firmly in place
with holding clips welded to unit body. Unit insulation to be CFC
free foamed in place urethane.
REFRIGERATION: Cooling system to utilize R-404a refrigerant,
specify if otherwise. Expansion valve and refrigeration lines
provided and installed for connection at unit rear. Syrup rail
cooled by refrigeration line installed and attached to sealed
stainless interior rail liner. Condensing unit control and solenoid
provided. Unit totally prewired to junction box.
Shown with optional finished end.
Standard Features:
• Refrigeration system set up for R-404a refrigerant,
(specify if otherwise)
• Expansion valve and refrigeration lines provided and installed
for field connection
• Superb low temperature unit for ice cream storage
and dipping
• Stainless steel interior allows double stacking of standard
3 gallon containers
• Foamed in place “CFC free” urethane insulation
• 6" high legs—adjustable and movable
• 45˚ integral stainless backsplash is standard. 90˚ stainless
backsplash is optional.
This equipment is intended for use in rooms having an ambient
temperature of 86˚F (30˚C) or less.
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, unifiedbrands.net
Please reference our website for the most
updated product information and specifications.
Randell Custom, Page 26
PP SPEC0141 Rev. A
Revised 08/07
PANEL
PANEL
PANEL
LEGEND
AFF =
ABOVE FIXED FLOOR
EXPANSION VALVE
V
20" AFF
BTU's
120V/60Hz/1Ph
Amps
OR
REFRIGERANT
CHOOSE ONE:
R-22 REFRIG.
R404 REFRIG.
R134A REFRIG.
CONNECTION:
1/4 " LIQUID,
3/8 " SUCTION
LINE 8 1/2 " AFF
OR
66000 Series
5"
36"
18"
33"
31"
42.75"
SECTION VIEW
43"
29" Deep Equipment
Length 18" 31" 43"
Height* 36" 36" 36"
Storage
Capacity 12 gal. 24 gal. 36 gal.
H.P. 1/3 1/3 1/3
Volts 115/60/1 115/60/1 115/60/1
Amps. 1 1 1
BTU’s 383 688 985
Ship Wt. 208 lbs. 297 lbs. 375 lbs.
33" Deep Equipment
Length 18" 31" 43"
Model No. 66318 66331 66343
Height* 36" 36" 36"
Storage
Capacity 12 gal. 24 gal. 36 gal.
H.P. 1/3 1/3 1/3
Volts 115/60/1 115/60/1 115/60/1
Amps. 1 1 1
BTU’s 401 712 1015
Ship Wt. 208 lbs. 297 lbs. 375 lbs.
* All units on 6" high adjustable, movable legs for 35 1/2" to 36 3/4" high work surface.
BTU load based on 100˚F ambient, 7˚ ice cream
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2009 Unified Brands. All Rights Reserved. DOVER® and the DOVER® Logo are registered
trademarks in the United States [and various other countries] of Unified Brands, a
wholly-owned subsidiary of Dover Corporation.
V
Component
Loading...