RANDELL 513114PR User Manual

PROJECT NAME:

LOCATION:

ITEM NO:

CUSTOM

RAISED COLDWALL REFRIGERATOR MODEL 51000PR

Self-contained refrigerator storage unit with mechanically cooled raised rail. These units are offered in a
variety of lengths to meet your specific base storage or pan storage requirements. The mechanically cooled
pan opening uses Randell’s exclusive design technologies, such as our Exclusive Refrigerated Raised Rail
Thermostat, allowing customers to make adjustments to the rail temperatures (independent of the base).
Automatic hot gas evaporator is provided for eliminating the base coil’s condensation. The rail is designed to
be a manual defrost system and allows the operator to shut the rail off while leaving the base operational.

AVAILABLE MODELS:

51338PR
51341PR
51344PR
51347PR
51356PR
51359PR
51362PR
51365PR
51368PR
51377PR
51380PR
51383PR
51386PR
51389PR
51395PR
513114PR
513126PR

STANDARD FEATURES:

• Low profile 2” recess pan design provides easy reach

and optimal pan temperatures & reliability

• Balanced high capacity refrigeration system with

expansion valve metering-able to handle peak period
demands

• Front breathing compressor housing with directed air

flow

• Easy maintenance press-fit gaskets

• Raised rail thermostat

• Drain in rail for easy cleaning

• Hinged louver for easy access

• 6” high legs—adjustable and movable

• Foamed in place “CFC free” urethane insulation

• Hinged removable stainless steel covers

• Automatic base defrost with condensate evaporator

• Available up to 16’ under one common assembly

• Adapter bars standard to accommodate a compliment

of 1/6 size pans

• Front breathing louver design allows sealing to wall &

curb mounting without special requirements

CABINET ExTERIOR: Top to be one piece of

die-formed 16 gauge stainless steel with 2 1/2”
nosing. Ends at top fitted with recessed heavy
duty steel bars for field bolting units together,
producing a hairline seam. Hinged louver panel to
be stainless steel. Exterior body to be corrosion
resistant steel. Door opening frames are ABS and
contain magnetic strip for positive seal of door
gaskets. Work surface to be at 36” work height. Legs
to be 6” high stainless steel with adjustable bullet
foot. Legs mounted to full length channel frame
assembly which is integrally welded to bottom of body
assembly. Legs can be moved left to right to avoid
floor obstacles during installation.

CABINET INTERIOR: Base interior to be ABS

thermoplastic at ends only. Stainless steel interior liner
to be coved cornered to form bottom, back and top. One
baked enamel finished shelf provided behind each door.
Unit insulation to be CFC free foamed in place urethane.

DOORS: Door fronts to be 22-gauge stainless steel

exterior front with 16 gauge stainless steel door pulls/
handles. The interior liner is vacuumed formed ABS
with integral gasket retainer for easy cleaning and
accepts Randell’s Exclusive Press Fit Gasket system.
Doors are mounted on concealed hinges. One
removable wire shelf is supplied behind each door.

REFRIGERATION: System is a balanced heavy

duty R-404A refrigerant system with an energy
efficient automatic defrost (for base evaporator coil).
The base is cooled by an independent blower coil
operating on its own expansion valve and thermostat
and operates through a dedicated solenoid valve. The
rail is provided with a pressure control to operate the
condensing unit on demand; and a rail thermostat
(located in the compressor housing) making it easily
adjustable for specific ambient conditions without
effecting the balance of the system. An on/off switch
for the rail is located behind the hinged louver panel.

ORIGIN OF MANUFACTURE: Designed and

manufactured in the United States.

QTY:

MODEL NO:

AIA NO:

SIS NO:

CSI SECTION: 11400

Raised Coldwall Refrigerator. Model
51362PR shown with optional
finished end.

OPTIONS/ACCESSORIES:

Patented Drawer Cartridge

Systems - Exclusive Randell
Feature + 3 years parts & labor

warranty!
Partial length rails
Flat-top rails (non-angled) for

use in display type kitchens
Ambient fighting hood design

with slide back cover
Hinged slide back removable

cover
Lift-off (removable) night covers
Tray racks for sheet pans (33”

dp., 24” doors only)
Cutting boards
Stainless Steel Ends
Stainless Steel Back
Laminate fronts, ends and back

options
Casters in lieu of legs
Over-shelving storage options
Compressor on right option
Wide pan rail

Custom

PPSPEC0130 RevB

Revised 10/13

51000PR

1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net

© 2013 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.