RANDELL 513114PO User Manual
PROJECT NAME:
LOCATION:
ITEM NO:
CUSTOM
SC RECESSED COLDWALL REFRIGERATOR MODEL 51000PO
Self-contained refrigerator storage units with mechanically cooled pan opening. These units are offered in
variety of lengths to meet your specific base storage or pan storage requirements. The mechanically cooled
pan opening uses Randell’s exclusive design technologies, such as our Exclusive Refrigerated Pan Opening
Thermostat allowing customers to make adjustments to the opening temperatures (independent of the base).
AVAILABLE MODELS:
51341P0
51344PO
51347PO
51356PO
51359PO
51362PO
51365PO
51368PO
51377PO
51380PO
51383PO
51386PO
51389PO
51395PO
513114PO
513126PO
STANDARD FEATURES:
• Low profile 2” recess pan design provides easy reach
and optimal pan temperatures & reliability
• Full Length Poly Cutting Board
• Front breathing compressor housing with directed air
flow - A Randell Exclusive.
• Easy maintenance Press-Fit gaskets - A Randell
Exclusive
• Pan opening thermostat- A Randell Exclusive
• Drain in pan opening for easy cleaning
• Hinged louver for easy access
• Hinged removable stainless steel covers
• Foamed in place urethane insulation providing superior
insulation and durability
• 6” high adjustable legs, moveable left to right if
needed
• Available up to 16’ under one common assembly
• Adapter bars are standard to accommodate a
compliment of 1/6 size pans
• Front breathing louver design allows sealing to wall &
curb mounting without special requirements
CABINET ExTERIOR: Top to be one piece of
die-formed 16 gauge stainless steel with 2 1/2” nosing
Backsplash to be coved cornered, with 45˚ return
at top and overall height of 6 3/4”. Ends at top fittedwith
recessed heavy duty steel bars for field bolting
units together, producing a hairline seam. Hinged louver
panel to be stainless steel. Exterior body to be corrosion
resistant steel. Door opening frames are ABS and
contain magnetic strip for positive seal of door gaskets.
Work surface to be at 36” work height. Legs to be 6”
high stainless steel with adjustable bullet foot. Legs
mounted to full length channel frame assembly which is
integrally welded to bottom of body assembly. Legs can
be moved left to right to avoid floor obstacles during
installation.
CABINET INTERIOR: Base interior to be ABS
thermoplastic at ends only. Stainless steel interior liner to
be coved cornered to form bottom, back and top. Unit
insulation to be CFC free foamed in place urethane.
DOORS: Door fronts to be 22-gauge stainless steel
exterior front with 16 gauge stainless steel door pulls
handles. The interior liner is vacuumed formed ABS with
integral gasket retainer for easy cleaning and accepts
Randell’s Exclusive Press Fit Gasket System. Doors are
mounted on concealed hinges.
REFRIGERATION: System is a balanced heavy
duty R-404A refrigerant system with an energy efficient
automatic defrost (for base evaporator coil). The base
is cooled by an independent blower coiled operating
on its own expansion valve and thermostat and operates
through a dedicated solenoid valve. The rail is provided
with a pressure control to operate the condensing unit
on demand and a rail thermostat (located in the
compressor housing) making it easily adjustable for
specific ambient conditions without effecting the balance
of the system. An on/off switch for the rail is located
behind the hinged louver panel.
ORIGIN OF MANUFACTURE: Designed and
manufactured in the United States.
QTY:
MODEL NO:
AIA NO:
SIS NO:
CSI SECTION: 11400
SC Recessed Coldwall Refrigerator.
Model 51362PO shown with optional
finished end.
OPTIONS/ACCESSORIES:
Hinged slide back cover
Lift-off (removable) night covers
Stainless Steel Ends
Stainless Steel Back
Laminate fronts, ends and back
options
Casters in lieu of legs
Over-shelving storage options
Wide pan opening
Custom
PPSPEC0131 RevB
Revised 10/13
51000PO
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2013 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.
Loading...