User Manual
RWX119 – Series
Features & Benefits:
1U short depth design console, server rack or relay rack mounted
19" Widescreen Samsung CCFL LCD w/ Hi-Resolution (1440 x 900)
Modular scalability: KVM Switch, Peripherals & More
Combo interface w/ PS/2 or USB input w/ front USB port access
New easy maneuver front handle
6 foot Combo KVM cable included
Modular Scalability
Multi-platform KVM switch capability: PS/2, USB or Sun
Mouse: Touchpad(e) or Trackball(b)
Keyboard available in 13 languages
DC power options: 48V, 24V or 12V
DVI-D + VGA Broadcast-grade input
o or DVI-D + SDI
o or DVI-D + Audio
o or DVI-D + S-Video + Composite (BNC)
o or HDMI with speaker
www.raloy.com 1
Contents
Chapter 1 Getting Started ........................................................................................................................... 4
1.1 Important Safeguards ........................................................................................................................................... 4
1.2 Regulatory Notice .................................................................................................................................................. 5
Legal Information
Safety Instructions
Regulatory Notices Federal Communications Commission (FCC)
1.3 Package Contents .................................................................................................................................................. 6
1.4 Before Installation ................................................................................................................................................. 7
1.5 Unpacking ............................................................................................................................................................... 7
1.6 Optional Accessories ............................................................................................................................................ 7
1.7 Default Password & Reset Diagram ................................................................................................................... 8
1.8 Structure Diagram ................................................................................................................................................. 9
1.9 Installation ..............................................................................................................................................................10
1.9 Installation (continued) ........................................................................................................................................11
1.10 How to use the slides ...........................................................................................................................................12
1.11 How to use the LCD Keyboard Drawer .............................................................................................................13
1.14 RW119 (Single console) – PS/2 Server Connection .......................................................................................14
1.15 RW119 (Single console) – PS/2 KVM Connection ..........................................................................................14
1.16 RW119 (Single console) – USB Server Connection .......................................................................................15
1.17 RW119 (Single console) – USB KVM Connection...........................................................................................15
Chapter 2 Operation .................................................................................................................................. 16
2.1 On-screen Display Operation .............................................................................................................................16
2.2 On-screen Menu ....................................................................................................................................................17
Chapter 3 Standard Specifications .......................................................................................................... 18
3.1 Specifications ........................................................................................................................................................18
3.2 Keyboard & Mouse ...............................................................................................................................................19
Chapter 4 Optional Specifications ........................................................................................................... 20
4.1 KVM Options ..........................................................................................................................................................20
4.2 DVI-D Option ..........................................................................................................................................................20
4.3 BNC + S-Video Option..........................................................................................................................................21
4.4 Audio Option..........................................................................................................................................................21
4.5 HDMI Options ........................................................................................................................................................22
4.5 DC Power Options ................................................................................................................................................22
www.raloy.com 2
Chapter 5 Troubleshooting ....................................................................................................................... 23
Chapter 6 Dimensions ............................................................................................................................... 24
www.raloy.com 3
Chapter 1 Getting Started
1.1 Important Safeguards
Please read all of these instructions carefully before you use the device. Save this manual for future reference.
What the warranty does not cover
Any product, on which the serial number has been defaced, modified or removed.
Damage, deterioration or malfunction resulting from:
o Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product
modification, or failure to follow instructions supplied with the product.
o Repair or attempted repair by anyone not authorized by us.
o Any damage of the product due to shipment.
o Removal or installation of the product.
o Causes external to the product, such as electric power fluctuation or failure.
o Use of supplies or parts not meeting our specifications.
o Normal wear and tear.
o Any other causes which does not relate to a product defect.
Removal, installation, and set-up service charges.
www.raloy.com 4
1.2 Regulatory Notice
Legal Information
First English printing, October 2002
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the
correctness of the contents. The information in this document is subject to change without notice. We are not
liable for any injury or loss that results from the use of this equipment.
Safety Instructions
Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned
environment with temperatures not exceeding 40º Celsius (104º Fahrenheit).
When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling
and causing damage to other equipment or injury to persons nearby.
When the drawer is in an open position, do not cover, block or in any way obstruct the gap between it
and the power supply. Proper air convection is necessary to keep it from overheating.
Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage
and current labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be
higher than the one listed on the equipment’s ratings label.
Observe all precautions and warnings attached to the equipment.
If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent
being damaged by transient over-voltage.
Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to
the power supply or on other hardware may cause damage, fire or electrical shock.
Only qualified service personnel should open the chassis. Opening it yourself could damage the
equipment and invalidate its warranty.
If any part of the equipment becomes damaged or stops functioning, have it checked by qualified
service personnel.
CAUTION: Slide/rail mounted equipment is not to be used as a shelf or a work space.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
Re-position or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
www.raloy.com 5
1.3 Package Contents
1) LCD keyboard drawer x 1 pc
2) RCB-6 USB 2-in-1 KVM cable x 1 pc or
RCE-6 Combo 4-in-1 KVM cable x 1 pc
3) User manual x 1 pc
4) Power cord x 1 pc
5) Auto switch power adapter ( for external power version) x 1 pc
6) Mounting bracket x 2 pcs
7) M6*15mm screw x 8 pcs
8) M3.2*6mm screw x 4 pcs
The above package content is only for the single console models. It varies with options such as KVM, SDI,
HDMI, DVI-D, AV, audio & DC power.
www.raloy.com 6
1.4 Before Installation
1. Combo 4-in-1 KVM cable
1.1 RCE-6 6 feet
1.2 RCE-10 10 feet
1.3 RCE-15 15 feet
2. USB 2-in-1 KVM cable
2.1 RCB-6 6 feet
2.2 RCB-10 10 feet
2.3 RCB-15 15 feet
3. Power Cord
3.1 IEC power cord
3.2 REC-PUS NEMA 5-15 power cord (US)
3.3 REC-PUK BS 1363 power cord (UK)
3.4 REC-PGM CEE 7/4 power cord (German)
3.5 REC-PAU AS 3112 power cord (Australia)
It is very important to place the LCD Keyboard Drawer in a suitable environment.
The surface for placing and fixing the LCD Keyboard Drawer should be stable and level or mounted into
a suitable cabinet.
Make sure the location is well ventilated, out of direct sunlight, away from sources of excessive dust,
dirt, heat, water, moisture and vibration.
Position LCD Keyboard Drawer with respect to related facilities.
1.5 Unpacking
The LCD keyboard drawer comes with the standard parts as shown in the package contents. Check and make
sure they are included and in good condition. If anything is missing, or damage, contact the supplier
immediately.
1.6 Optional Accessories
www.raloy.com 7
1.7 Default KVM Password & Reset Diagram
The user name & password can be reset to default “00000000” (8 digits of zero via keyboard not 10Key)
1) The KVM password can be reset on the KVM PCB board
2) Open the KVM top metal cover
3) Find the jumper J7, then use either paper clip or scissors to touch the two boxes of J7 in order to
close/short the jumper 5 ~ 10 second
www.raloy.com 8
1.8 Structure Diagram
www.raloy.com 9
1.9 Installation
Attach the left and right mounting bracket to rack 19” mounting rails
Adjust the mounting bracket to fit your rack
M6 screw x 8pcs included
Caution:
Leaving all M6 screw slightly loose, until you complete the installation in step
Pull out left & right inner slide members
2
www.raloy.com 10
1.9 Installation (continued)
Pick up the LCD tray.
Insert the LCD tray into the mounting bracket.
Pull and hold the left & right black arrow buttons on
the rails.
Return the LCD tray to park position.
Fix the rear kit to the mounting bracket by M3.2 screw x 4 pcs included.
Caution:
This step is necessary. Failure to complete this will cause damage.
Complete the installation
Tighten all 8 pcs of M6 screw to complete the installation.
5
www.raloy.com 11
1.10 How to use the slides
Figure 1.
A black arrow release button is
located on the outside of each
slide. (shown in Figure 1).
Figure 2.
Pull and hold the black arrow
button on either side of the LCD
keyboard drawer to unlock. (shown
in Figure 2).
Figure 3.
Push the LCD keyboard drawer into
the rack. (shown in Figure 3).
Caution : Keep your fingers away from the
slide stop
www.raloy.com 12
1.11 How to use the LCD Keyboard Drawer
Figure 4. Sliding out the LCD keyboard drawer by
pressing the carry handle button first.
Press the carry handle button. Gently pull the
carry handle toward the front of the LCD.
(shown in Figure 4)
Figure 5. Flipping up the LCD to a suitable angle.
Flip up the LCD to a suitable angle. (shown in
Figure 5)
Figure 6. Operating the LCD keyboard drawer
Operate the LCD keyboard drawer. (shown in
Figure 6)
www.raloy.com 13
1.12 RWX119 (Single console) – PS/2 Server Connection
Caution: The LCD keyboard drawer is hot-pluggable, but components of connected devices, such as
the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while servers
and KVM are powered on may cause irreversible damage to the servers, KVM and LCD keyboard
drawer. Before attempting to connect anything to the LCD keyboard drawer, we suggest turning off the
power to all devices before connecting them. Apply power to connected devices again only after the
LCD keyboard is receiving power. The company is not responsible for damage caused in this way.
- Use RCE-6 to connect to server via PS/2 interface
Figure 9.
Example of connecting RCE-6 4-in-1 Combo KVM cable to server via PS/2 interface
1.13 RWX119 (Single console) – PS/2 KVM Connection
- Use RCE-6 to connect to KVM via PS/2 interface
Figure 10.
Remarks:
The above connection is only for the LCD keyboard without KVM switch built-in.
For the LCD keyboard drawer with KVM switch built-in, please refer to attached KVM switch user manual.
Example of connecting RCE-6 4-in-1 Combo KVM cable to KVM via PS/2 interface
www.raloy.com 14
1.14 RWX119 (Single console) – USB Server Connection
Caution: The LCD keyboard drawer is hot-pluggable, but components of connected devices, such as
the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while servers
and KVM are powered on may cause irreversible damage to the servers, KVM and LCD keyboard
drawer. Before attempting to connect anything to the LCD keyboard drawer, we suggest turning off the
power to all devices before connecting them. Apply power to connected devices again only after the
LCD keyboard is receiving power. The company is not responsible for damage caused in this way.
- Use RCE-6 to connect to server via USB interface
*- Note: if you requested the RCB-6 it is a USB only connection
Figure 11. Example of connecting RCE-6 4-in-1 Combo KVM cable to server via USB interface
1.15 RWX119 (Single console) – USB KVM Connection
- Use RCE-6 to connect to KVM via USB interface
*- Note: if you requested the RCB-6 it is a USB only connection
Figure 12.
Remarks:
The above connection is only for the LCD keyboard without KVM switch built-in.
For the LCD keyboard drawer with KVM switch built-in, please refer to attached KVM switch user manual.
Example of connecting RCE-6 4-in-1 Combo KVM cable to KVM via USB interface
www.raloy.com 15
Chapter 2 Operation
LCD membrane
Membrane Switch
Function
Power light
Green = On
Orange = Power saving
Power on / off LCD
Display the OSD menu
Scrolls through menu options and adjusts the displayed control
(To auto adjustment by pressing the button for 5 seconds)
Exit the OSD screen
Toggle analog, digital & video connection (DVI-D and video options only)
2.1 On-screen Display Operation
www.raloy.com 16
2.2 On-screen Menu
OSD Configuration Page
Image:
To enter into the brightness, contrast, colour temp, red, green, and blue
Geometry:
To enter into the auto adjust, H position, V position, phase and clock
Video:
To enter into the colour, tint, sharpness, noise reduction, DCDi and TV Setup
Audio:
To enter into volume, bass, treble, balance, AVL and mute
Misc:
To enter into the language, OSD position, graphic mode, OSD time, ratio, reset and timer
www.raloy.com 17
Chapter 3 Standard Specifications
Item
Description
Form Factor
1U rack mounting on slide-out rails
LCD Manufacturer
Series
RWX
Diagonal Size
Wide 19" TFT color LCD
Max Resolution
1440 x 900
Color Support
16.7 M
Contrast Ratio (typ.)
1000:01:00
Viewing Angle (H/V)
80/80/80/80
Display Area (mm)
408H.24H x 255.15V
Tr Response Time (ms)
5
LCD Panel MTBF (hrs)
50,000
VGA Signal Input
Analog RGB, 0.7Vp-p
Sync. Type
Separate H/V, Composite, SOG
Resolution
1440 x 900 x 60Hz
Plug & Play DDC
1280 x 1024 x 60 / 75Hz
1280 x 960 x 60Hz
1280 x 760 x 60 / 75Hz
1152 x 864 x 75Hz
1024 x 768 x 60 / 70 / 75Hz
848 x 480 x 60Hz
800 x 600 x 60 / 72 / 75Hz
720 x 400 x 70Hz
640 x 480 x 60 / 72 / 75Hz
640 x 400 x 70Hz
640 x 350 x 70Hz
DVI/VGA VESA EDID 1.3 structure 1.3
Power Input
Auto-sensing 100 to 240VAC, 50 / 60Hz
Power Consumption
Max. 25 Watt, Standby 4 Watt, Off 1 Watt
Compatibility
Multi-platform – Mix PCs, SUNs, IBMs, HPs & DELLs.
Regulation Approval
FCC, CE, cUL
Environmental
RoHS2 & REACH compliant
Video Connection
Digital
HDMI
HDMI 1.1, CEA-861-D
DVI
DVI DVI-D, TMDS single link
Analog
Analog VGA Analog 0.7Vp-p
Analog VGA Analog 0.7Vp-p
Composite ( BNC )
NTSC & PAL
S-Video ( 4-pin )
NTSC & PAL
Plug & Play
DVI/ VGA
VESA EDID structure 1.3
Synchronization
VGA Separate, Composite & SOG
Audio Connection
Audio Input
Connector
3.5mm stereo jack
Impedence/ Power level
30k Ω/ 750mV
Audio Output
Connector
3.5mm stereo jack
Resistance/ Power level
30k Ω/ 2.8V
Speaker Output
Power
2x2W
3.1 Specifications
www.raloy.com 18
Supporting languages
Supporting layouts
3.2 Keyboard & Mouse
www.raloy.com 19
Chapter 4 Optional Specifications
4.1 KVM Integration Options
Our KVM is designed to seamlessly integrate into the rear of our full range of LCD drawer solutions:
www.raloy.com 20
4.2 DVI-D Option
DVI-D
3-in-1
VGA KB mouse
console port
Speaker
S-Video
BNC
3-in-1
VGA KB mouse
console port
Power
Audio
3-in-1
VGA KB mouse
console port
Remarks:
Package includes 1 x 6ft DVI-D cable
Either HDMI or DVI-D can be selected.
For the above option casing depth will be extended from 460mm ( 18.1" ) to 530mm ( 20.9" )
4.3 BNC + S-Video Option
Remarks:
Package includes 1 x 6ft S-Video cable
4.4 Audio Option
Remarks:
Audio input is 35mm audio plug
The speaker shares the same power with LCD.
www.raloy.com 21
4.5 HDMI Option
HDMI
3-in-1
VGA KB mouse
console port
Model
12V 24V 48V
Input rating
Input voltage:
12-Volt
24-Volt
48-Volt
Input range:
9 ~ 18V
18 ~ 36V
36 ~ 75V
Input current
- No load
50 mA
50 mA
50 mA
- Full load
4950 mA
2450 mA
1220 mA
Output rating
Output voltage:
12-Volt
12-Volt
12-Volt
Output current:
4.16A
4.16A
4.16A
Efficiency
84%
85%
85%
Remarks:
Either HDMI or DVI-D can be selected.
For the above option casing depth will be extended from 460mm ( 18.1" ) to 530mm ( 20.9" )
4.6 DC Power Options
Remarks:
Package does not include power cord and AC power adapter
www.raloy.com 22
Chapter 5 Troubleshooting
1. Is interference signal appeared on LCD normal when shutting down the computer?
In rare cases, interference may appear on the monitor. This may be caused by signal rate of VGA card and
is considered normal. The image quality can be improved by adjusting the phase or pixel rate automatically
or manually.
2. The membrane power light is not ON
Press the power ON / OFF on LCD membrane to check if the monitor is in the ON mode. Check the power
cord is properly connected to the LCD keyboard drawer and power outlet.
3. Screen image is not centered or sized properly
Press the button for two seconds to automatically adjust the image. Adjust the H-position and Vposition settings via On-screen menu.
4. Is the LCD keyboard drawer hot-pluggable?
The LCD keyboard drawer is hot-pluggable, but components of connected devices, such as the servers
and KVMs, may not be hot-pluggable. We suggest turning off the power to all devices before connecting
them. Apply power to connected devices again only after the LCD keyboard receives power.
5. How do I adjust the resolution?
To change monitor resolution, click Start -> Control Panel -> Display. Select Setting tab to adjust the
monitor resolution in Desktop Area. The available resolutions, "640 x 480", "800 x 600", "1024 x 768",
"1152 x 864", "1280 x 1024", “1440 x 900”, are determined by the display card in your computer.
www.raloy.com 23
Model
Product Dimension
(W x D x H)
Packing Dimension
(W x D x H)
Net Weight
Gross Weight
RWX119 Series
17.4W x 18.1D x 1.73H in.
(442 x 460 x 44 mm.)
23.2 x 30.2 x 5.5 in.
(590 x 768 x 140 mm.)
25 lbs
(11.5kgs)
36 lbs
(16.3kgs)
Chapter 6 Dimensions
The company reserves the right to modify product specifications without prior notice and assumes no responsibility for any error which may appear in
this publication.
All brand names, logo and registered trademarks are properties of their respective owners.
Copyright 2014 Raloy All rights reserved.
www.raloy.com 24
Loading...