RADWAG THB Series, THBR, THB.S, THB.U, THB.W User Manual

IMMU-60-02-10-18-EN

USER MANUAL

THB Ambient
Monitoring System

Standard THB.S Sensor
Precise THB.U Sensor
THB.W Sensor (for Liquid)
THBR Box Ambient Conditions Recorder

www.radwag.com

OCTOBER 2018

2

Contents

1. GENERAL INFORMATION 4

2. THB.S AND THB.U CONSTRUCTION 4

3. THB.W SENSOR CONSTRUCTION 5

4. THBR Box CONSTRUCTION 6

5. THB 2ETH CONVERTER CONSTRUCTION 7

6. UNPACKING 7

6.1. Unpacking 7

7. START-UP 8

7.1. Connecting THB.S Sensor to Laboratory Balance 8

7.2. Connecting THB.S or THB.U Sensor to the Computer 9

7.3. THBR Box Recorder and THB.S or THB.U Sensor 10

8. MAINTENANCE, SERVICE, RECYCLING 11

8.1. Maintenance 11

8.2. Service 11

8.3. Utilisation 11

3

1. GENERAL INFORMATION

THB.S and THB.U sensors are measuring devices cooperating with 3Y, 4Y, laboratory
balances, PC and THBR Box. The sensors are used to carry out measurement of temperature,
humidity and atmospheric pressure at the workstation.
The indications may be displayed either on an indicator screen or a computer screen.
On the basis of measurement values transferred from the THB module, the 3Y, 4Y, balance
program determines air density. The determined air density is displayed on the screen too. PC

- THB.x version is operated via 'THBR Single' software.
THBR Box - THB.x version is operated via 'THBR Multi' software.

2. THB.S AND THB.U CONSTRUCTION

THB.S and THB.U sensors consist of:

1 – sensor,
2 – standard micro-USB cable
3 – stand

4