Radio Shack HS-1903 User Manual

Cat. No.
43-1903
HS-1903 Earpiece with Boom Microphone, Noise Cancellation, Volume Control and Microphone Mute
Your RadioShack HS-1903 Earpiece with Boom Micro­phone, Noise Cancellation, Volume Control and Microphone Mute gives you portab le, co nvenien t commu nication. Using the ultra-light headset while you make and receive calls, you can keep y our hands free to d o other things. Th e headset connects easily to many cordless or cellular phones that have a
Your headset includes these features: Reversible Ear Piece — lets you wear t he headset o ver
either ear. Flex ible Microphone Boom — lets you adjust the micro-
phone’s position so callers can hear you more clearly. Noise Canceling Microphone — minimize surrounding
noise and unnecessary wind sound while you talk to the microphone.
On-Cord Volume Control and Mute Button — easily adjust the incoming sound source volume le vel and m ute control for microphone.
Replaceable Microphone Sponge and Ear Muff — easily replaceable for hygiene purposes.
3
/32-inch (2.5mm) jack.
ADJUSTING THE HEADSET
1. Place the headset over either ear as shown.
2. Hold the headset i n pl ace and adjust the microphone boom until it is about even with your chin. Experiment until you find the most comfortable position.
3. Attach the cord’s lapel clip to your clothing. Leave enough slack in the co rd so y ou can m ov e your head without pulling the headset.
3 DIfferent Sizes of Ear Sponge and Ear Hooks — to fit and position different ear size more firmly.
Storage Pouch — for easy carrying and travelling. Lapel Clip — lets you securely anchor the headset’s modu-
lar cord to your clothing to preve nt the headset from slip­ping.
CONNECTING THE HEADSET
Insert the headset’s mini plug into the 3/32-inch (2.5 mm) jack of a cordless or cellular phone.
USING VOLUME AND MUTE
Adjust the phon e’s volume to a point between its middle and maximum levels. T hen adjust phones’ cord to a comfortable level.
MUTE
Turn crophone, Turn
to ON on the headset’s cord to turn off the mi-
MUTE
to
OFF
VOLUME
to turn it on.
on the head-
© 1998 Tandy Corporation.
RadioShack is a registered trademark used by Tandy Corporation.
All Rights Reserved.
Listening Safely
CARE AND MAINTENANCE
To protect your hearing, follow these guidelines when you use the headset.
• Set the phone’s volume to the lowest setting before you begin listening. After you begin listening, adjust the volume to a comfortable level.
• Do not listen at extremely high volume levels. Extended high- volume l istening can lead to perma­nent hearing loss.
• Once you set the volume, do not increase it. Over time, your ears adapt to the volume l evel, so a vol­ume level that does not cause discomfort might still damage your hearing.
Traffic Safety
Do not use the headset with your cellular telephone when operating a motor vehicle or riding a bicycle in or near traffic. Doing so can creat e a tra ffic hazard and could be illegal in s ome areas.
If you use the headset with your cellular telephone while riding a bicycle, be very careful. Do not listen to a continu­ous broadcas t. Even thoug h so me ea rphones /headp hone s let you hear some outside so unds when listen ing at normal volume levels, they still can present a traffic hazard.
Your RadioShack HS-1903 Earpiece with Boom Micro­phone, Noise Cancellation, Volume Control and Micro­phone Mute is an example of superior design and craftsmanship. The following suggestions will help you care for your headset so you can enjoy it for years.
• Keep the headset dry. If it gets wet, wipe it dry imme­diately.
• Handle the headset gently and carefully. Don’t drop it.
• Use and store the headset on ly in normal tempera­ture environments.
• Keep the headset away from dust and dirt.
• Wipe the headset with a damp cloth occasionally t o keep it looking new.
Modifying or tampering with the headset’s internal com­ponents can cause a malfunction and might invalidate your headset’s warranty. If your heads et is not perform­ing as it should, take it to your local RadioShack store for assistance.
RadioShack
A Division of Tandy Corporation
Fort Worth, Texas 76102
1A9 Printed in China
Loading...
+ 2 hidden pages