Radio Shack 63-992 User Manual
6TCPURCTGPV"&KURNC["%NQEM
63-992
"+/2146#06"
If an icon appears at the end of a paragraph, go to the box on that
#
page with the corresponding icon for pertinent information.
— Warning
Rý
°°°°
— Hint
— Important
#
#
±
— Note
....
— Caution
Please read before using this equipment.
OWNER’S MANUAL
2002 RadioShack Corporation.
©
All Rights Reserved.
RadioShack and RadioShack.com are
trademarks used by RadioShack Corporation.
%106'065
Features ................. 2
Preparation ............ 2
Features
Removing the
Protective
Film ................... 2
Removing the
Back Plate ......... 3
Installing a
Battery ............... 3
Operation ............... 4
Setting the
Time and Date ... 5
Setting the
Dual Time .......... 7
Setting Daylight
Saving Time ...... 8
Resetting the
Clock ...... ........... 9
Care ..................... 10
Service and
Repair .................. 10
Specifications ....... 11
('#674'5
Your RadioShack Transparent
Display Clock combines a
simple design with advanced
technology. Its large liquid
crystal display makes it easy to
view the current time, da te, and
indoor temperature. You can
set the clock so it shows your
local time, or your local time
plus the time in a time zo ne you
select, or the local time and
date. Your clock’s built-in
thermometer lets you see the
indoor temperature. You can
set the cloc k so it shows the
time in a 12- or 24-hour format.
24'2#4#6+10
4'/18+0)"6*'"
2416'%6+8'"(+./
Before using your clock, peel
the protective fil m off both sides
of the display to remove them.
2
4'/18+0)"6*'"
$#%-"2.#6'
For better contrast, your clock
comes with a white plate
behind the disp lay. Simp ly slid e
the plate up to remove it if you
wish.
+056#..+0)"#"$#66'4;
Your clock requires one AAA
battery (not supplied) for power.
For the best performance and
longest life, we recommend a
RadioShack alkaline battery.
.#
±
Follow these steps to install a
battery.
1. Slide the battery
compartment cover in the
direction of the arrow to
remove it.
2. Place the battery in the
compartment (and on top
of the attached ribbon) as
.
"%#76+10"."
• Use only a f resh
battery of the
required size and
recommended type.
• If you do not plan to
use the clock for a
month or more,
remove the battery.
Batteries can leak
chemicals that can
destroy electronic
parts.
±
"016'"±"
Replacing the battery
resets the clock.
Preparation
3
"9#40+0)"R"
R
Dispose of old
batteries promptly
and properly. Do not
burn or bury them.
Operation
indicated by the polarity
symbols (+ and –) marked
inside.
3. Replace the cover.
When the display dims or the
clock stops operating properly,
replace the battery.
Rý
12'4#6+10
All segments appear on the
display when you install the
battery. The thermometer
appears and displays the
current indoor temperature.
If you do not press RESET after
you install a battery, so mething
other than 7Cý'(0&&ý&&ý'#'ýI7Jý
might appear.ý
reset the clock (see “Resetting
the Clock” on Page 9).
7Cý'(0&&ý&&ý'#'ýI7Jý
7Cý'(0&&ý&&ý'#'ýI7Jý7Cý'(0&&ý&&ý'#'ýI7Jý
ýIf this happens,
ýý
4
Loading...