Radio Shack 49-1010 User Manual
what’s included
Campus Security Kit
using your doorstop alarm
using your window alarm
doorstop alarm
window
trigger anchor
UV proof window decals (2)
keychain alarm with light
double-sided
adhesive tape (1)
Thank you for purchasing your Campus
Security Kit from RadioShack.
doorstop alarm keychain alarm
window alarm UV proof window decals (2)
double-sided adhesive tape (1)
49-1010
alarm
The door stop alarm is for indoor use only.
1. Remove battery
compartment
cover, and insert
one 9V battery (not
supplied) as
shown. Slide
ON/OFF to ON.
ON/OFF
2. Insert the alarm
at the base of your
door, making sure
the non-skid pad
on the bottom
of the alarm is in
firm contact with
the floor. When the door is opened,
the alarm’s metal plate is depressed,
which presses down the trigger
anchor and sounds the alarm.
3. To silence the doorstop alarm, turn it
OFF.
4. Press down on the metal wedge so
that it is positioned where it will
depress the trigger anchor.
Your window alarm comes with four LR44
button-cell batteries installed. Before use,
test the batteries as follows:
1. Slide to Lo or Hi.
2. Push this button. If
the red LED lights,
the batteries are
good. If the LED does
not light, replace the
3. Slide off the battery
cover to replace the
batteries.
Mounting your Alarm
1. Mount your window alarm indoors, on
a window pane.
2. Apply the supplied adhesive tape onto
a window pane, with the side labeled
“ACTIVE” facing outside for external
visibility. Then, firmly press the window
alarm onto the adhesive tape.
3. Slide to Hi or Lo to arm. Hi provides
more sensitivity for a larger area; Lo is
suitable for use in a smaller area.
Please read this user’s guide before
installing, setting up and using your new product
www.radioshack.com
4. Apply the UV proof window decal on
the window.
5. Slide to OFF to disarm the unit.
using your keychain alarm
limited 90-day warranty
specifications
Your keychain alarm comes with three
battery notes
LR44 button-cell batteries installed. If the
alarm stops working, grasp and remove
the cover to replace the batteries.
Power Source:
Door Stop Alarm ............................ One 9V Battery
Window Alarm ...........................4 LR44 Button-Cell
Batteries
Keychain Alarm ..........................3 LR44 Button-Cell
Batteries
This product is warranted by RadioShack against manufacturing defects in
material and workmanship under normal use for ninety (90) days from the date
of purchase from RadioShack company-owned stores and authorized RadioShack
franchisees and dealers. For complete warranty details and exclusions, check
with your local RadioShack store.
RadioShack Customer Relations
200 Taylor Street, 6th Floor, Fort Worth, TX 76102
12/99
cover
1. Grasp the keychain and pull the chain to
remove the pin. This sounds the alarm.
2. Re-insert the pin to
silence the alarm.
3. To turn on the light,
3
2
hold down this button.
Warning: Keep away from small children. If
swallowed, promptly see doctor.
Dispose of old batteries promptly and properly.
Do not burn or bury batteries.
Operation Voltage:
Door Stop Alarm ................................. 9V (7V Min.)
Window Alarm ................................. 6V (4.5V Min.)
Keychain Alarm .............................. 4.5V (3V Min.)
Operating Temperature
(0°C to 45°C)
Do not mix old and new batteries, different types of batteries
(standard, alkaline, or rechargeable), or rechargeable
batteries of different capacities.
Use only fresh batteries of the required size and
recommended type.
..................... 32°F to 113°F
If you do not plan to use the alarm for several weeks,
remove the batteries. Batteries can leak chemicals that
can damage electronic parts.
©2004. RadioShack Corporation.
All rights reserved. RadioShack and
RadioShack.com are trademarks
used by RadioShack Corporation.
49-1010
Printed in China
04A04
Loading...