Radio Shack 43-337 User Manual

Answering System • Caller ID

2-Line Corded/Cordless Phone

43-337

User’s Guide

Thank you for purchasing your 2-Line Corded / Cordless Phone from RadioShack.
Please read this user’s guide before installing, setting up, and using your new
phone.

Contents

Contents

Package Contents .............................................................................................. 4

Important Safety Instructions .............................................................................4

Contents

Installing Your Phone ..........................................................................................5

1 Attach the Stand ........................................................................................................5

2 Connect the Phone Base ............................................................................................ 5

3 Test the Telephone Line Connection .......................................................................... 7

4 Set Up the Accessory Handset ................................................................................... 7

5 Test the Cordless Handset Connection ...................................................................... 9

Changing from Tone to Pulse Dialing ...........................................................................9

Using the Belt Clip ........................................................................................................9

Getting to Know Your Phone ........................................................................... 10

Parts of the Base .........................................................................................................10

Parts of the Handset ....................................................................................................12

Reading the Displays .................................................................................................. 13

Using the Soft Keys ..................................................................................................... 15

Entering Text on Your Phone .......................................................................................17

Using the Menus .............................................................................................. 18

The Handset and Base Setup Menu ............................................................................19

The Clock Setup Menu ................................................................................................ 19

The Global Setup Menu .............................................................................................. 20

Special Feature Menus ................................................................................................20

Making and Answering calls .............................................................................21

Working with Two Lines ...............................................................................................21

Using the Speakerphone ............................................................................................. 23

Changing the Volume .................................................................................................. 23

Using an Optional Headset ......................................................................................... 23

Using the Caller ID and Redial Lists ................................................................. 24

Dialing from the CID or Redial List .............................................................................. 24

Caller ID and Redial Menu Options ............................................................................25

Using Seven-Digit Dialing ...........................................................................................25

Using Call Waiting ....................................................................................................... 25

Using the Phonebook ....................................................................................... 26

Dialing from the Phonebook .......................................................................................26

Setting Up Your Phonebook ........................................................................................ 27

Phonebook Menu Options .......................................................................................... 28

Chain Dialing ............................................................................................................... 28

2

Using Multi-station Features ............................................................................ 29

Expanding Your Phone ................................................................................................ 29

Using Multi-Station Conference Calling ...................................................................... 29

Using Privacy Mode ..................................................................................................... 29

Using Call Transfer ....................................................................................................... 30

Using the Intercom ...................................................................................................... 30

Using Special Features ..................................................................................... 31

Using Your Phone During a Power Failure .................................................................. 31

Finding a Lost Handset ...............................................................................................31

Using Do Not Disturb .................................................................................................. 31

Using Call Block ........................................................................................................... 32

Using the Alarm Feature ............................................................................................. 33

Using Voice Message Notifi cation ............................................................................... 34

Using the Answering System ..........................................................................35

Setting Up Your Answering System ............................................................................. 35

Getting Your Messages ............................................................................................... 36

Contents

Screening Your Calls .................................................................................................... 38

Using the System While You’re Away from Home ...................................................... 38

Additional Information .....................................................................................39

Troubleshooting .......................................................................................................... 39

Resetting and Registering Handsets ........................................................................... 42

Handling Liquid Damage ............................................................................................43

Specifi cations............................................................................................................... 43

Glossary .......................................................................................................................44

FCC Information ..........................................................................................................45

Limited Warranty ......................................................................................................... 47

3

Package Contents

Important Safety Instructions

Package Contents

• Cordless Handset (1) • Base (1)

• Corded (Base) Handset (1) • Coiled Handset Cord (1)

• Charger (1) • Modular Cord (1)

• AC Adapters (2) (for the base and for the charger)

• Ni-MH Battery Pack (1) (inside handset)

• Belt Clip (1) • Desk Stand/Wall Mount Bracket (1)

• User’s Guide (1) • Quick Start Guide (1)

Setup

Important Safety Instructions

When using your telephone equipment, basic safety precautions should always
be followed to reduce the risk of fi re, electric shock and injury to persons,
including the following:

1. Do not use this product near water, for example, near a bath tub, wash bowl,
kitchen sink or laundry tub, in a wet basement or near a swimming pool.

2. Avoid using a telephone (other than a cordless type) during an electrical
storm. There may be a remote risk of electric shock from lightning.

3. Do not use the telephone to report a gas leak in the vicinity of the leak.

4. Use only the power cord and batteries indicated in this manual.

5. Do not dispose of batteries in a fi re. They may explode. Check with local

codes for possible special disposal instructions.

6. Do not place the handset in any charging cradle without the battery installed
and the battery cover securely in place.

SAVE THESE INSTRUCTIONS

®

As an Energy Star
determined that this product meets the Energy Star®
guidelines for energy effi ciency. Energy Star® is a U.S.
registered mark.

Partner, RadioShack Corporation has

4

Installing Your Phone

Installing Your Phone

1 Attach the Stand

Before you attach the stand, you have to decide if you want the phone to rest on
a desk or hang on a wall.

For desktop use

1. Turn the stand so the word

DESK is right-side up (it will
be on the right).

Setup

2. Insert the tabs into the

notches marked DESK at the
top of the base.

WALL

3. Press in on the latch and slip it
into the notch.

For wall mount use

1. Turn the stand so the word

WALL is right-side up (it will
be on the right).

2. Insert the tabs into the
notches marked WALL at the
bottom of the base.

3. Press in on the latch and slip it
into the notch.

DESK

n Note: To remove the stand,

press in on the latches and slide them out of the notch.

DESK

WALL

DESK

WALL

WALL

DESK

DESK

WALL

2 Connect the Phone Base

1. Use the coiled cord to connect the
corded handset to the connector on the
left side of the base.

5

2. Connect the base AC adapter to the AC IN 7.8V jack and route the cord as

L

K

£

Ó

Î

{

shown:

For desktop use For wall mount use

DESK

WALL

WALL

DESK

WALL

DESK

DESK

DESK

WALL

Setup

WALL

3. Connect the included two-line telephone cord to the TEL LINE 1/2 jack. If
your phone company uses a
separate phone jack for each line,
connect a standard telephone cord
to the TEL LINE 2 jack. Route the
cords as shown above.

4. Connect the cord from TEL LINE 1/2
to a two-line phone jack.

OR

AC IN 7.8V

IF you have a separate
jack for line 2, connect

another phone cord here.

TEL LINE 2

TEL LINE 1/2

Connect the
telephone cord
here first.

If your phone company uses a separate phone jack for each line, connect the
cord from TEL LINE 1/2 to the jack for line 1; then, connect the cord from
TEL LINE 2 the jack for line 2.

5. Plug the AC adapter into a standard 120 V AC power outlet.

w Caution: You must use a Class 2 power source that supplies 7.8V AC (for the

base) / 8V AC (for the charger) and delivers at least 450 mA (for the base) / 300
mA (for the charger). Its plug must fi t the phone’s AC IN 7.8V / AC IN 8V jack.
The supplied adapters meet these specifi cations. Using an adapter that does
not meet these specifi cations could damage the phone or the adapter.

DES

WAL

Place the phone on the wall (for wall mount use only)

1. On the front of the base below the hook

switch, pull the clip that holds the corded
handset in place out of its slot.

2. Rotate the clip 180 degrees.

3. Flip it from front to back and slide it back

into the slot.

4. Place the mounting slots over the pins on
the wall plate, and slide the base down to lock it into place.

6

3 Test the Telephone Line Connection

1. Pick up the corded handset from the base. The phone should pick up line 1
automatically and change the display to show

Talk , and you should hear

a dial tone.

2. When you get a dial tone, make a test call.

If... Try...

the display says
you don't hear a dial tone

you keep hearing a dial tone

there's a lot of noise or static

Check or

checking the connection between the base and
the phone jack: make sure the cord is connected to
TEL LINE 1/2.

setting line 1 to pulse dialing. (See “Changing from
Tone to Pulse Dialing” on page 9.)

see “Resetting and Registering Handsets” on page 42 for
tips on avoiding interference.

3. Once you can make calls on line 1, make a test call
on the second line. Pick up the corded handset
and press the unmarked key under

LINE2

. You

should hear a dial tone and the display should
show

Talk .

SUN 12:00A
12/31/08

.+0'

/'07

0

0

.+0'

Setup

If... Try...

the display says
you don't hear a dial tone

you keep hearing a dial tone

Check or

checking the connection between the base and the
phone jack: if you have a separate jack for each line,
make sure the cord is connected to TEL LINE 2.

setting line 2 to pulse dialing. (See “Changing from
Tone to Pulse Dialing” on page 9.)

4 Set Up the Accessory Handset

1. Press down and slide the battery cover off.

2. Lift the battery pack out of the compartment.

3. Line up the battery pack

connector with the jack
inside the handset.
(The battery connector will only fi t one way.)

4. Push the battery pack connector in until it clicks
into place. Tug gently on the wires to make sure
the battery pack is securely connected.

7

5. Place the cover over the battery compartment and slide it up

into place.

6. Connect the charger AC adapter to the charger’s
AC IN 8V jack and set the plug into the notch as shown.

7. Plug the other end of
the adapter into a
standard 120V AC
power outlet.

AC IN 8V

8. Place the handset in the charger with the
display facing forward. The CHARGE

Setup

light should turn on.

n Note: Charge the handset completely (about 15 hours)

before using it.

If... Try...

the CHARGE
light doesn't
turn on

- reseating the handset.

- checking the AC adapter connection.

- seeing if the outlet is controlled by a wall switch.

b Battery Notes:

• Keep an eye on the battery status icon. When the battery gets too low, the
handset shows a low battery alert. If you hear a strange beep during a call,
check the display: if you see the low battery alert, fi nish your conversation as
quickly as possible and return the handset to the cradle. If the handset is in
standby, none of the keys will operate.

• With normal use, the battery should last about one year. Replace the battery
when the talk time becomes short even when the battery is charged. You can
order a replacement battery pack (Ni-MH DC 2.4V 500mAh) through your
local RadioShack store.

• Using a damp cloth, clean the charging contacts on the handset about once
a month.

• If you are not going to use your phone for an extended period, disconnect
the battery pack. This increases the battery pack’s usable life.

w Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose

of used batteries according to the instructions.

8

Recycle rechargeable batteries

Placing rechargeable batteries in the trash can be harmful to the
environment. Instead, recycle old rechargeable batteries at your
local RadioShack store free of charge. RadioShack participates
in the RBRC© battery recycling program, and is committed to preserving
the environment and conserving natural resources. Call 1-800-THE-SHACK
(1-800-843-7422) for more information.

5 Test the Cordless Handset Connection

1. Pick up the handset and press TALK ( )/FLASH. You should hear a dial tone,
and the display should say Talk.

2. Press END to hang up.

If you can’t get a dial tone or the handset display says Unavailable, try moving
the handset closer to the base or resetting it. (See “Resetting and Registering

Handsets” on page 42.)

Changing from Tone to Pulse Dialing

Phones can communicate with the telephone network in two ways: tone (DTMF)
or pulse dialing. If you know your phone company uses pulse dialing or the test
call for line 1 did not work, follow these steps:

1. With the phone in standby, press

2. Use UP or DOWN to highlight

3. Your phone prompts you to select a line and Line 1 is highlighted. Press

4. Use UP or DOWN to highlight Dial Mode, and then press

MENU

Global Setup, and then press

.

OK

.

OK

OK

.

Setup

.

5. Highlight
Try making another test call using line 1.

Pulse, and then press

OK

. The phone sounds a confi rmation tone.

n Note: If your test call on line 2 did not connect, follow the same process, but

in step 3, press DOWN to highlight Line 2 and then press

If you use pulse dialing and you need to send DTMF tones during a call (if you’re
using an automated response system, for example), press to temporarily
switch to tone dialing. When the call ends, the phone automatically returns to
pulse dialing mode.

OK

.

Using the Belt Clip

To attach the belt clip

Line up the holes on each side of the handset. Insert the belt clip into the holes
on each side of the handset. Press down until it clicks.

To remove the belt clip

Pull either side of the belt clip to release the tabs from the holes.

9

Getting to Know Your Phone

Getting to Know Your Phone

Parts of the Base

If the key name is spelled out on the key itself, it’s not labeled in the drawing
below.

Basic Operation

Handset clip

Hook switch

Display

PHONEBOOK/LEFT

PLAY/STOP

UP
CALLER ID/

RIGHT

DOWN

Soft keys

DELETE

12-key
dial pad

Base keys and how they work

Key name
(and icon)

PHONEBOOK/
LEFT (

PLAY/STOP (

/ )

What it does

- In standby or during a call: open the phonebook.

- During text entry: move the cursor to the left.

- In the fi rst 2 seconds of a message: go to the previous message.

- Anytime after that: go to the beginning of this message.

- In standby: start playing messages.

)

- While a message is playing: stop playing messages.

DO NOT

DISTURB

INTERCOM/

HOLD

SPEAKER

Microphone
(on back)

10

Key name
(and icon)

UP (

)

What it does

- In standby: increase the ringer volume for line 1 or line 2.

- During a normal call: increase the earpiece volume.

- During a speakerphone call or while a message is playing:
increase the speaker volume.

- In the menu or any list: move the cursor up one line.

CALLER ID/RIGHT
(

/ )

DOWN (

SOFT KEYS

DELETE (

ON/OFF - In standby: turn the answering system on or off.

MUTE/EXIT

)

)

- In standby or during a call: open the Caller ID list.

- During text entry: move the cursor to the right.

- While a message is playing: skip to the next message.

- In standby: decrease the ringer volume for line 1 or line 2.

- During a normal call: decrease the earpiece volume.

- During a speakerphone call or while a message is playing:
decrease the speaker volume.

- In the menu or any list: move the cursor down one line.

- The soft keys automatically change their function based on what
you are doing. See “Using the Soft Keys” on page 15.

- While a message is playing: delete this message.

- In standby: delete all messages.

- While entering text: delete one character, or press and hold to
delete all the characters.

- While this station is ringing: mute the ringer for this call only.

- During a call: mute the microphone.

- In the menu or any list: exit the menu completely.

Basic Operation

CONFERENCE - During a call: conference two lines together.

INTERCOM/HOLD
(INT’COM/HOLD)

SPEAKER (

DO NOT DISTURB
(DND)

REDIAL/PAUSE

)

- In standby: page a handset using the intercom.

- During a call: put the call on hold and start a call transfer.

- In standby: start a speakerphone call (get a dial tone).

- During a normal call: switch to the speakerphone.

- During a speakerphone call: hang up.

- In standby: turn the Do Not Disturb feature on or off. (See “Using
Do Not Disturb” on page 31.)

- In standby: open the redial list.

- While entering a phone number: insert a 2-second pause.

11

Parts of the Handset

Message

waiting LED,

visual ringer

Soft keys

Earpiece

Display

TALK/FLASH

PHONEBOOK/

Basic Operation

REDIAL/

INTERCOM/

Charging

contacts

Handset keys and how they work

Key name
(and icon)

What it does

LEFT

DOWN

PAU SE

HOLD

UP

END

CALLER ID/
RIGHT

12-key
dial pad

SPEAKER

Microphone

- In standby: increase the ringer volume for line 1 or line 2.

UP (

END

CALLER ID (
RIGHT

SPEAKER (

INTERCOM/HOLD
(INT’COM/HOLD)

)

)/

)

- During a call: increase the call volume.

- In the menu or any list: move the cursor up one line.

- During a call: hang up.

- In the menu or any list: exit and go to standby.

- In standby or during a call: open the Caller ID list.

- During text entry: move the cursor to the right.

- Switch a normal call to the speakerphone (and back).

- In standby: page another station using the intercom.

- During a call: put the call on hold and start a call transfer.

12

Key name
(and icon)

What it does

REDIAL (

DOWN (

PHONEBOOK (
LEFT

TALK (

SOFT KEYS

)/PAUSE

)

)/FLASH

- In standby: open the redial list.

- While entering a phone number: insert a 2-second pause.

- In standby: decrease the ringer volume for line 1 or line 2.

- During a call: decrease the call volume.

- In the menu or any list: move the cursor down one line.

- In standby or during a call: open the phonebook.

)/

- During text entry: move the cursor to the left.

- In standby: start a telephone call (get a dial tone).

- During a call: switch to a waiting call.

- The soft keys automatically change their function based on
what you are doing. See “Using the Soft Keys” on page 15.

Reading the Displays

On the base

Status icon areas

SUN 12:00A

Day & time

Basic Operation

Answering
system status
for:

Line 1

Date

Caller ID

count

Current

functions

On the handset

12/31/08
New CID: 4

.+0'

for:

Soft key 1 Soft key 2 Soft key 3

Status

icons

Handset

banner

Current

functions for:

Soft key 1 Soft key 2 Soft key 3

/'07

SUN 12:00A
Handset #1
New CID: 2

.+0' /'07 .+0'

1212

.+0'

Line 2

Day and
time

Caller ID
count

13

The table below shows the possible icons and what they mean. Since the icons

1

59

appear based on what you’re doing with the phone, you won’t ever see all of
these icons at the same time.

Base Icon Handset Icon What it means

The accompanying information (in use, on hold, etc.)

or

or

applies to line 1.

The accompanying information (in use, on hold, etc.)
applies to line 2.

The ringer is turned off for 1) line 1 only, 2) line 2 only,
or 3) both. This station will not ring when a call comes
in on the indicated lines.

You have a voice message waiting. (See “Using Voice
Message Notifi cation” on page 34.)

Privacy Mode is on: no other station can join your call.

The speakerphone is on.

The microphone is muted, and the caller can't hear
you.

The alarm is set. (See “Using the Alarm Feature” on
page 33.)

T-coil mode is on. (See “Do you use a T-coil hearing aid?”
on page 41.)

The battery is 1) fully charged, 2) half charged, 3)
getting low, or 4) empty.

The signal from the base is 1) very weak, 2) low, 3)
strong, or 4) very strong.

Basic Operation

NA

NA

NA

NA

Answering system status icons

The icons on the right hand side of the base display indicate the status of the
answering system. Each icon will appear separately for line 1 (at the top) and line
2 (at the bottom). See ”Using the Answering System” on page 35 for more information.

Icon What it means

The answering system is off: it will not answer the phone.

The answering system is set to announce only: it will answer the
phone but will not record any messages.

The answering system memory is full: you must delete some saved
messages.

through

59

This number indicates the number of new messages for each line.

14

Using the Soft Keys

Soft keys are controlled by the software: they will automatically change their
function depending on what you’re currently doing:

Soft keys with the phone in standby

On the base On the handset

SUN 12:00A

SUN 12:00A

12/31/08

Handset #1

New CID: 4

.+0'

Soft key 1 Soft key 2 Soft key 3

Soft keys in the main menu

On the base On the handset

/'07

1212

.+0'

New CID: 2

.+0' /'07 .+0'

Soft key 1Soft key 2 Soft key

<Options>

<Options>

Base Setup

Handset Setup

Ans. Setup

1212

1-$CEM

Ans. Setup

Basic Operation

3

1-$CEM

Soft key 1 Soft key 2 Soft key 3

• The description of the soft key’s current function appears in the bottom of the
display directly above the corresponding key.

• If the description for a soft key is blank, that key doesn’t currently have a
function.

Soft key 1Soft key 2 Soft key

3

15

• Sometimes, the current function of a soft key can duplicate the function of a
regular key. If this happens, you can press either key.

• When this manual refers to a soft key, it uses the soft key’s description printed
on a black background.

Common soft key descriptions

The table below lists some soft key descriptions that the phone uses across
several menus or operations. These are not all the soft key descriptions, but
these are probably the ones you’ll see most often.

Soft key description: What it does:

Basic Operation

BACK

CANCEL

DELETE

LINE1

LINE2

MENU

MUTE

OK

OPTIONS

SELECT

Go back to the previous screen.

Cancel the current operation without saving any changes.

Erase the highlighted item.

Use line 1 for the current operation.

Use line 2 for the current operation.

Open the main menu screen.

Turn off the ringer, speaker, or microphone.

Select the highlighted option or confi rm the current operation.

Show available choices for the current operation or for the
highlighted item.

Choose the highlighted option.

16

Entering Text on Your Phone

When you want to enter text into your phone (for example, a name in the
phonebook), use the twelve-key dial pad to enter the letters printed on the
number keys. Here’s how it works:

• The phone enters the letters in the order they appear on the key. For
example, if you press the number key 2 once, the phone enters the letter
Press 2 twice for B, and three times for C.

• If you press the key again after the last letter, the phone starts the same letter
sequence with small letters. If you press 2 four times in a row, the phone
enters a (small letter). Press 2 fi ve times for b, and six times for c.

• If you see the icon [Aa] in the display, the phone enters capital letters fi rst (A

), then small letters (a b c), and then the number on the key (2). The icon

B C

[aA] means the phone starts at the small letters, so it enters small letters fi rst,
then the number on the key, and then capital letters.

• The phone automatically uses a capital letter for the fi rst letter and any letter
right after a space; all other times, it uses small letters.

A.

Basic Operation

• If two letters in a row use the same number key, enter the fi rst letter, and then
use CALLER ID

( )/RIGHT to move the cursor to the next position to enter

the second letter.

If you want to... Operation

switch between capital
and small letters

move the cursor

leave a blank space Press # (POUND).

erase one letter

erase the entire entry

enter punctuation or a
symbol

Press

Press PHONEBOOK (
or CALLER ID (

Move the cursor to the letter you want to erase and press the

DELETE

Press and hold

Press 0 to rotate through the available symbols.

.

)/LEFT to move the cursor to the left

)/RIGHT to move the cursor to the right.

soft key. (On the base, you can also press DELETE.)

DELETE

.

17

Using the Menus

Using the Menus

The menus are designed to be as easy as possible. Some users don’t even need
the manual once they know how to perform these actions:

To open the menu,
press

/'07

To close the
menu:

<Options>
Retrieve Msg

Handset Setup

Ans. Setup

UP and

Use

DOWN to move

the cursor.

Go back one

screen.

If you don’t press any keys for thirty seconds, the phone times out and exits
the menu. (When setting the day and time, the time-out period is extended

Basic Operation

to two minutes.)

If you want to... Operation

Clock Setup
Global Setup

1-$#%-

on the
handset,
press

END;

on the base,
press

MUTE/EXIT.

Select the
current item.

open the menu

move the cursor

select an option

return to the pre­vious screen

close the menu

The next several pages list all the available menu options and how to use them.
Most of the menus are the same for the base and cordless handsets; any option
that is available only for the base or handset is noted in the description.

Press

The cursor (the black bar with the white text) shows which menu
item is currently highlighted; when you’re entering characters, the
cursor shows where you are in the line.

- Use UP to move the cursor up one line.

- Use DOWN to move it down one line.

- Use PHONEBOOK/LEFT to move it one space to the left.

- Use CALLER ID/RIGHT to move it one space to the right.

Move the cursor to highlight the option, and then press OK.

Press
the menu.

On the handset, press END; on the base, press MUTE/EXIT.
(If you open the menu during a call, press

menu without hanging up.)

MENU

BACK

. If you press

.

BACK

on the fi rst screen, the phone exits

BACK

to back out of the

18

The Handset and Base Setup Menu

When you open the menu on a handset, this menu is called Handset Setup.
On the base, this menu is called Base Setup. Each of these options can be set
separately for each station. (A station can be any cordless handset or the base.)

Menu option: Use it to:

T—coil

Alarm Setting

Primary Line

Ringer Tones

Personal Ring

Auto Talk

Any Key Answer

Banner

Handset/Base
Language
LCD Contrast
Key Touch Tone

(Handset only) Turn on T-coil mode to reduce noise on some
hearing aids. (See “Do you use a T-coil hearing aid?” on page 41.)

(Handset only) Set alarms on your handset. (See “Using the Alarm
Feature” on page 33.)

Select the line you want this station to use as the default line
when you make a call. (See “Assigning a primary line” on page 22.)

(Handset only) See the ring tones the handset is using as the
main ring tone for each line. To change the tone, select the
line, and then choose a ring tone from the list. As you highlight
each ring tone, the phone plays a sample of the tone (unless the
handset ringer volume is set to off). When you hear the tone you
want, press

(Handset only) Turn on the personal ring feature. If you have
Caller ID, this feature lets you assign special ring tones to anyone
in your phonebook: this handset will use the special ring tone
when that person calls. (See “Setting Up Your Phonebook” on page 27.)

(Handset only) Turn on Auto Talk so you can answer the phone
just by picking up the handset from the cradle (without having to
press any buttons).

(Handset only) Turn on Any Key Answer so you can answer the
phone by pressing a key on the twelve-key dial pad.

(Handset only) Change the name used on the handset's display.
Enter any name up to 10 characters.

Change the language used in the display.

Change the contrast of the display.
Have the keypad sound a tone when you press a key.

OK

.

Basic Operation

The Clock Setup Menu

You must set the date and time if you want to use the handset’s alarm feature;
setting the clock will also ensure the answering system stamps your messages
with the correct time and day. You can set the clock from the base or any
cordless handset.

1. Open the menu and select

2. Use the numbers on the twelve-key dial pad to enter the date.

3. Move the cursor to the next line, and then use the dial pad to enter the time.

4 Press to switch between AM and PM; when you have fi nished, press

Clock Setup.

19

SAVE

.

The Global Setup Menu

The settings on this menu are separate for each line: changing the settings for
line 1 will not affect line 2, and vice versa. However, the settings for each line
apply to all stations whenever they use that line.

Before changing these settings, make sure the phone is in standby and all
handsets are within range of the base. (Only one station at a time can change
these settings.)

When you select the

Line 1 or Line 2. Then, you can choose one of the following options to change

Global Setup menu, the phone prompts you to select

the global settings for that line:

Menu option: Use it to:

Area Code

Dial Mode

Set Line
Mode

Enter your area code so the phone hides the area code on incom­ing local calls. (See “Using Seven-Digit Dialing” on page 25.)

Change the way your phone communicates with the telephone
network. (See ”Changing from Tone to Pulse Dialing” on page 9.)

Do not change this setting unless instructed to by customer
service.

(Base only) Reset the voice message waiting indicator to bring it

VMWI Reset

Basic Operation

back into sync with your voice mail service. (See ”Using Voice Message
Notifi cation” on page 34.)

Special Feature Menus

The following menus control specifi c features of your phone. These menus are
explained under the section that describes the feature in detail:

Menu: Use it to: For details, see:

Retrieve Msg

(handset only)

Ans. Setup

Access your answering system
from a cordless handset.

Change the settings for the
answering system on each line.

Block unwanted calls from

Call Blocking

up to 20 phone numbers and
manage your call block list.

Register
Handset

(base only)

Add new handsets or reset
a handset that isn’t working
properly.

“Getting Your Messages” on page 36

“Ans. Setup menu options” on page 36

“Using Call Block” on page 32

”Resetting and Registering Handsets”

on page 42

20

Making and Answering calls

Making and Answering calls

Working with Two Lines

When performing common tasks, you can let the station use the primary line, or
you can manually choose a particular line for each task. Using the primary line
makes common tasks much simpler, but you will need to assign a primary line to
each station (see below).

If you want to... From the base From a cordless handset

make a call

- with the primary line

- by choosing a line

answer a call

When a call comes in, the soft keys blink to tell you which line is ringing.

- with the primary line Pick up the corded handset.

- by choosing a line Press the soft key for the line you want to answer.*

hang up

put a call on hold

switch lines during a call
(automatic hold)

Dial the number, and then
pick up the corded handset.

Dial the number, and then press

Return the handset to the
cradle.

Press INT’COM/HOLD; the soft key blinks to remind you
the line is on hold. To return to the call, press the soft key

LINE1

(

Press the soft key for the other line; the current call is
automatically put on hold (see above). To return to the call,
press the soft key for the holding line.

or

LINE2

) for the holding line.

Dial the number, and then
press TALK (

LINE1

Press TALK (

Press END or return the
handset to the cradle.

or

LINE2

)/FLASH.

.*

)/FLASH.

Basic Operation

mute the microphone
during a call

mute the ringer for this
call only

* On the base, pick up the corded handset to switch from the speaker to the earpiece.

Press MUTE/EXIT.
Press again to turn the microphone back on.

While the phone is ringing,
press MUTE/EXIT.

Press

While the phone is ringing,
press END.

MUTE

21

.

Assigning a primary line

You can assign a primary line to each station; the station connects to its primary
line whenever it goes off hook (that is, when you press TALK ( )/FLASH or
SPEAKER ( )). Whenever you want, you can bypass the primary line assignment
by manually choosing line for your current task.

1. Open the menu and select

Handset/Base Setup.

2. Select Primary Line, and then choose the line you want this station to

connect to when it goes off hook:

Menu option: Use it to:

Line 1

Line 2

Auto

Conferencing two lines together

Basic Operation

Always connect to line 1, regardless of either line's status.

Always connect to line 2, regardless of either line's status.

Connect to line 1 except under the following circumstances:

- there is an incoming call on line 2

- there is a holding call on line 2

- the answering system has picked up line 2

- line 1 is being used for an active call or for screening a call
If any one of these conditions is true, the station connects to line 2.

When you have active calls on both lines, you can join the two lines together in a
conference call.

1. Place the fi rst call on hold.

2. Switch to the other line and start the second call.

3. Press

MENU

, and then select Conference. (On the base, you can also press

CONFERENCE.)

• During a conference call, you can speak with both outside callers at the same
time, and the callers can speak with each other.

• To separate the conference call back into two independent calls, press the
soft key for either line. The other line is automatically put on hold, and you
can switch between calls normally.

• To disconnect both callers at the same time, just hang up normally (press
END or put the handset back in the cradle).

• To disconnect one caller at a time, select the line you want to disconnect, and
then hang up. Press the soft key to return to the other caller (on hold).

n Note: Other stations can also join in the conference call. See “Using Multi-

station Features” on page 29 for more information.

22

Using the Speakerphone

Both the handset and the base have a speakerphone. To use the base speaker,
press SPEAKER ( ) instead of using the corded handset. To use the handset
speaker, press SPEAKER ( ) instead of TALK ( )/FLASH.

To... From the base From a handset

make a call: Dial the number, and then

answer a call

switch a call to the speakerphone

switch back to the earpiece

hang up a speakerphone call

* You can also press

LINE1

or

LINE2

to use the speaker for that line.

Press SPEAKER

Press SPEAKER

Press SPEAKER

Pick up the corded
handset.

Press SPEAKER

( ).* Press SPEAKER ( ).

( ).* Press SPEAKER ( ).

( ). Press SPEAKER ( ).

( ).

Press SPEAKER

Press END.

( ).

Changing the Volume

You can set the volume of the ringer, the earpiece, and the speakerphone
separately for the base and each cordless handset. The available volume levels
and how to change them are listed below; for each item, press UP to make it
louder or DOWN to make it softer.

Change the When On the base On a handset

ringer volume the phone is in standby

select a line, and then select Off, Low,

Medium

, or High

Basic Operation

earpiece
volume

speaker
volume

you are on a normal call

you use the speaker­phone for a call or
getting messages

choose one of 6 volume levels for the
active line

choose one of 10
volume levels for the
active line

Using an Optional Headset

You can use a standard 2.5 mm telephone headset with
your cordless handsets.

• To install a headset, remove the headset jack cover
and insert the headset plug into the jack.

• Just make and receive calls as usual, and use your
headset to talk to the caller after the call connects.

• When you connect a headset, the handset
automatically mutes the earpiece and speaker. To re­activate the earpiece or speaker, just unplug the headset.

choose one of 6
volume levels for
the active line

(Belt clip
hole)

23

Using the Caller ID and Redial Lists

Using the Caller ID and Redial Lists

You have to subscribe to Caller ID to use Caller ID features: contact your telephone provider for
more information.

Caller ID list information

• When a call comes in, the phone displays the caller’s number and name (if available) along with
which line is receiving the call.

• The phone saves the information for the last 50 calls received on either line to the CID list. The
phone records which line the call came in on.

• When it’s in standby, each station displays the total number of calls received on both lines since
the last time you checked the CID list.

• New records (that are records you have not reviewed yet) have the number of times received
from that phone number (or an asterisk if it is over 10 times) next to the received time stamp.
(The time stamp is for the latest call.) After the record is reviewed, the number or an asterisk will
disappear.

• You can edit the list separately on each station.

Redial list information

• Each station has its own redial list.

• The redial list contains the last 10 phone numbers dialed from that station.

• The redial list does not record which line was used to dial the number.

If you want to... Operation

open the CID list

open the redial list Press REDIAL (

scroll through the CID
or redial list

close the CID or redial
list

Press CALLER ID (

Press DOWN to scroll through the list from newest to oldest. Press UP
to scroll from oldest to newest.

Press END on a handset or MUTE/EXIT on the base. (If you open the
list during a call, press

Advanced Operation

Dialing from the CID or Redial List

1. Find the entry you want to dial.

2. To dial the entry with the primary line for this station, press TALK (

corded handset from the base; to manually choose a line, press

n Notes:

• In the CID list, if the number is a toll or long distance call but there’s no 1 at the front of the
record, press to add the 1.

• You can also go off hook before you open the list. Press TALK (
handset (for the primary line), or press

DIAL

.

)/RIGHT.

)/PAUSE.

BACK

LINE1/LINE2

to back out of the list without hanging up.)

)/FLASH or pick up the

LINE1/LINE2

)/FLASH or pick up the corded

. Find the entry you want, and then press

to dial the entry.

24

Caller ID and Redial Menu Options

With the phone in standby, open the CID or the redial list. Find the entry you want and press

OPTIONS

Menu option: Use it to:

Store into PB

Store & Edit

Delete Entry

Delete All

Add Call Block

. Choose one of the following:

Add the selected CID/redial list entry to this station’s phonebook. The phone
creates a new phonebook entry, then prompts you to edit the name and
phone number; cordless handsets also prompt you to choose a personal ring.
(See “Creating a new entry” on page 27.)

Append the selected phone number to an existing phonebook entry. The
phone prompts you to select the phonebook entry you want to add the number
to, then opens that entry for editing. (See “Editing an existing entry” on page 27.)

Erase this entry from the CID or redial list.
Erase all entries from this station's CID or redial list. (This does not affect the

CID or redial lists saved on any other stations.)
(CID list only) Add this entry to your call block list. (See “Using Call Block” on

page 32.)

Using Seven-Digit Dialing

If you can make a local call by dialing only seven digits instead of ten, you can tell the phone to hide
your local area code in the CID list.

n Note: Do not enter an area code if your phone company requires ten-digit dialing. You might

not be able to dial from the CID list.

1. With the phone in standby, open the menu and select Global Setup.

2. Select

3. Use the number keypad (0 - 9) to enter a three-digit area code.

4. Press OK when you have fi nished.

• The phone uses the programmed code as a fi lter. When calls come in, the phone compares the
incoming area code to the one programmed for that line. If they match, the phone hides the
area code in the CID list.

• While reviewing the list, press # to toggle the area code off and on.

• When you dial from the CID list or save the number to the phonebook, the phone dials or stores

the number exactly as it is currently displayed.

Line 1 or Line 2, and then select Area Code.

Using Call Waiting

• A Call Waiting call refers to a call received on a line while that line is already in use.

• Call Waiting and Caller ID on Call Waiting are services provided by your telephone company. You

must subscribe to these services to use these features.

• Call Waiting is independent for each line: Call Waiting calls do not roll over to the second line.

• When you get a Call Waiting call, the phone sounds a tone and displays any CID information

received for the waiting call.

• To answer a Call Waiting call, press
phone company automatically puts the current call on hold and switches you to the waiting call.

• Use

FLASH

switch, there is a short pause before you’re connected to the other caller.

and TALK ( )/FLASH to switch between the two calls; remember, each time you

FLASH

on the base or TALK ( )/FLASH on a handset. The

Advanced Operation

25

Using the Phonebook

Using the Phonebook

Each station can store up to 100 entries in its phonebook, and each entry can have two different
phone numbers.

If you want to... Operation

open the phonebook

scroll through the
entries

jump to entries that
start with a certain
letter

close the phonebook

Press PHONEBOOK (

Press DOWN to scroll through the phonebook from A to Z or UP to
scroll from Z to A.

Press the number key corresponding to the letter you want to jump to.

On the handset, press END; on the base, press MUTE/EXIT. (If you
open the phonebook during a call, press
hanging up.)

Dialing from the Phonebook

If you want to... Operation

1. Find the entry you want to dial.
quick dial the primary
number for an entry

2. Press TALK (

The phone dials with the primary line for this station. (See “Assigning a
primary line” on page 22.)

)/LEFT.

BACK

to back out without

)/FLASH or pick up the corded handset from the base.

Advanced Operation

dial either number for
an entry

use a speed dial
number to open a
phonebook entry

1. Find the entry you want to dial and press

2. Move the cursor to one of the two phone numbers for that entry.

3. To dial the number with the primary line for this station, press

TALK ( )/FLASH or pick up the corded handset from the base; to
manually choose a line, press

On the dial pad, press and hold the number assigned to the phonebook
entry you want. The phone opens the phonebook and goes directly to
that entry. Follow the instructions for dialing an entry above.

SELECT

SELECT

and then press

.

LINE1/LINE2

.

26

Setting Up Your Phonebook

Creating a new entry

1. Open the phonebook with the phone in standby, and press

2.

Edit Name appears. Enter the name (up to 16 characters) you want to use for this entry. (See

“Entering Text on Your Phone” on page 17.) Press OK when you have fi nished.

• If you do not want to enter a name for this entry, simply press

3.

Edit Number1 appears. Enter the primary number (up to 32 digits) for this entry exactly the

way you would dial it. Press OK when you have fi nished.

• If you need the phone to wait before sending the next set of digits, press REDIAL (
to enter a two-second pause.

• If two seconds isn't long enough, you can enter as many pauses as you want.

• Each pause counts as one digit (you'll see a P in the number).

4. Edit Number2 appears. Enter the secondary number for this entry just like you did the
primary number. Press

• If you do not want to enter the secondary number for this entry, simply press

5. (Handset only)
when this person calls. As you highlight each ring tone, the handset sounds a sample of that tone
(unless the handset ringer volume is set to off). When you fi nd the ring tone you want to use,
press OK. (See “The Handset and Base Setup Menu” on page 19 to turn the personal ring on or off.)

• If you do not want to use a personal ring tone for this entry, choose

will use your standard ring tone setting.

6. Speed Dial appears. Select the speed dial number (SPD0 through SPD9) you want to assign
to this entry, and then press OK.

• The speed dial numbers correspond to the numbers (0 through 9) on the twelve key dial pad.

• Each speed dial number can be assigned to only one entry.

• If the speed dial number is already assigned, the phone shows the name of the entry assigned

to the number. If you want to change it, select the number, and the phone overwrites the
existing assignment.

• If you do not want to assign this entry to a speed dial number, choose

Personal Ring appears. Choose the ring tone you want the handset to use

OK

when you have fi nished.

NEW

.

OK

.

)/PAUSE

OK

.

No Selection. The phone

No Selection.

Advanced Operation

Editing an existing entry

1. With the station in standby, open the phonebook and fi nd the entry you want.

2. Press

3. Highlight the individual item you want to change and press

4. Edit the item as described under

5. Highlight the next item you want to edit

OPTIONS

screen for that item.

“Creating a new entry” (above), and
press

OK

OR

Press

BACK

to the main entry.

and press
editing this entry, press

, and then choose Edit.

.

to cancel editing and return

SELECT

. If you have fi nished

SAVE

SELECT

. The phone goes to the edit

Edit
Bob Smith

987-555-1234

123-555-9876

Clatter
Speed Dial 4

.

27

Edit Name

Edit Number1

Edit Number2

Personal ring (handset

only)

Edit
Speed

5#8'5'.'%6$#%-

Dial

Phonebook Menu Options

Open the phonebook with the phone in standby, and press
From the main phonebook screen, you have three options:

Menu option: Use it to:

Create New

Copy All

Delete All

If you select an individual entry and then press

Menu option: Use it to:

Copy

Edit

Add an entry to your phonebook. (See “Creating a new entry” on page 27.)

Copy the whole phonebook to another station. (You must have at least one
cordless handset to use this multi-station feature.)

Erase all the entries in this station's phonebook. (This does not affect the
entries saved on any other stations.)

OPTIONS

Copy this entry to another station. (You must have at least one cordless
handset to use this multi-station feature.)

Edit this entry. (See “Editing an existing entry” on page 27.)

, you have these additional options:

OPTIONS

to open the phonebook menu.

Delete

Erase this entry.

n Note: When you copy entries to another station, the speed dial information will not be

transferred.

Chain Dialing

• If you often have to enter a series of digits or a code number during a call, you can save that

Advanced Operation

code number to a phonebook entry and use the phonebook to send the code number.

• Enter the code number (up to 32 digits) into the phonebook just like a regular phonebook entry.
Be sure to enter the code number into the phonebook exactly as you would enter it during a call.

During your call, when you hear the prompt to enter the code number:

1. Open the phonebook and fi nd the entry that contains your code number.

2. Press

3. Press

SELECT

DIAL

in the phonebook.

OR

If you change your mind, use

and select the number (phone number 1 or 2) you want.

to transmit the code. The phone transmits the code number exactly as you entered it

BACK

to close the phonebook.

28

Using Multi-station Features

Using Multi-station Features

The expandable base works together with the accessory handsets to give you some useful multi­station features. (A station can be any cordless handset or the base.) You must have at least one
cordless handset to use the features in this section.

Expanding Your Phone

• Your base supports a total of ten cordless handsets, including any that were supplied with your
phone.

• Your base is compatible with 43-339 accessory handset.

• Accessory handsets must be registered to the base before you can use them. Handsets that
have not been registered display a
registering handsets to this base, see “Registering a handset” on page 42 or refer to the manual that
came with the accessory handset.

• Any accessory handsets that came packaged with the base are already registered to that base
for you.

• If a handset was previously registered to a base, you have to reset it so you can register it to a
new base. (See “Resetting and Registering Handsets” on page 42.)

Handset not registered message. For instructions on

Using Multi-Station Conference Calling

When an outside call comes in on either line, the base and four cordless handsets can join in a
six-way conference call with the outside caller.

1. To join a call in progress, just connect to the active line
(press

2. To leave a conference call, hang up normally; all other
stations remains connected to the call.

• If you conference line 1 and line 2 together (see
“Conferencing two lines together” on page 22), the base and
four cordless handsets can hold a seven-way call with
both outside callers at the same time.

• You can also use the speakerphone for a conference call,
just like you can with a normal call.

LINE1

or

LINE2

).

Using Privacy Mode

You can prevent other stations from joining a call.

1. Start your call as usual.

2. Press

3. When you hang up, Privacy mode turns off automatically.

MENU

and select Call Privacy.

Advanced Operation

As long you have Privacy mode on, no other stations can interrupt your call (you’ll see a
handset display and a

mode off by repeating the process above (press

in the base display). To allow another station to join the call, just turn Privacy

MENU

and select Call Privacy).

29

in the

Using Call Transfer

You can transfer an outside call to any other station.

To... From the base From a cordless handset

1. Press INT’COM/HOLD to put the call on hold.

2. Select the station you want to transfer the call to, or select

transfer a call

all the stations at the same time.

When the other station accepts the call, you'll be disconnected, but you
can join the call again.

All to page

cancel a transfer

accept a transferred
call

Press SPEAKER (
the call.

1. To answer the page and speak
to the transferring station, pick
up the corded handset.

2. To accept the call, press the
soft key (
holding line.

LINE1

) to return to

or

LINE2

) for the

Press TALK (
call.

1. To answer the page and speak
to the transferring station, press

INT’COM/HOLD.

2. To accept the call, press the
soft key (
holding line.

)/FLASH to return to the

LINE1

or

LINE2

) for the

Using the Intercom

Here are some things you need to know about using the intercom:

• Whenever the phone is in standby, you can make an intercom call between stations without
using the phone line.

• You can make an intercom call from any station, but only two stations can be in an intercom call
at any time.

• If an outside call comes in during an intercom call, the phone shows the CID information. If
the other station hasn’t answered the page, the phone cancels the page so you can answer the
incoming call.

To... From the base From a cordless handset

make an intercom

Advanced Operation

page

cancel a page Press INT’COM/HOLD. Press END.

answer an intercom
page

leave an intercom
call

answer an outside
call during an inter­com call

1. Press INT’COM/HOLD.

2. Select the station you want to talk with, or select

tions at the same time.

Press INT’COM/HOLD or pick up
the corded handset.

Press INT’COM/HOLD. Press END.

Press the soft key (
phone automatically disconnects the intercom call and connects you to the
outside line.

LINE1

or

30

All to page all the sta-

Press INT’COM/HOLD or TALK (
FLASH.

LINE2

) for the line you want to answer. The

)/

Using Special Features

Using Special Features

Using Your Phone During a Power Failure

Because it includes a corded handset, your phone can perform several of its functions during a
power failure. The following features will operate during a power failure (all other features are
disabled):

• Making and receiving calls with the base corded handset.

• Changing the volume on the corded handset.

• Using Call Waiting on a base corded handset call.

n Notes:

• Only line 1 is available during a power failure.

• While the power is out, the base uses a special ringer; you cannot adjust the volume of this
ringer.

Finding a Lost Handset

1. With the phone in standby, press INT’COM/HOLD on the base.

2. Select the handset you want to fi nd, or select All to page all handsets at the same time.

3. The paged handset(s) will beep for 1 minute, or until you press INT’COM/HOLD again or press

TALK (

)/FLASH followed by END on the handset.

Using Do Not Disturb

The Do Not Disturb or DND feature turns off the ringers of the base and all handsets at the same
time.

1. With the phone in standby, press and hold DND (DO NOT DISTURB) on the base. The phone
automatically turns on the answering system and shows Do Not Disturb in the display on all
stations.

2. To cancel, press DND (DO NOT DISTURB) again.

n Note: If you turn the answering system off while DND is on, the phone turns off DND along with

the answering system.

Advanced Operation

31

Using Call Block

If you subscribe to Caller ID, you can block incoming calls by adding numbers to the call block list.

• When either line receives a call, the phone compares the received phone number to the
numbers on the call block list. If the phone number is on the list, the phone replaces the caller’s
name with

• The call block list holds 20 entries; this list applies to all stations and both lines.

• You can add a number to the call block list through the CID list options (see “Caller ID and Redial

Menu Options” on page 25), or through the

• Only one station can edit the call block list at a time.

Call blocking menu options

With the phone in standby, open the menu and select Call Blocking. Choose one of these
options:

Menu option: Use it to:

Call Blocked and disconnects the call. (The caller hears a reject tone.)

Call Blocking menu (see below).

View Number

Create New

Private Number

Unknown Number

See the numbers on your call block list.

Add an entry to your call block list. The phone will prompt you to enter a
name and phone number.

Block all calls from numbers reported by CID as "Private." (This does not
count as one of the 20 entries.)

Block all calls from numbers reported by CID as "Unknown." (This does not
count as one of the 20 entries.)

Call block entry options

With the phone in standby, open the call block list and fi nd the entry you want. Press
open the individual entry menu. Choose one of these options:

Advanced Operation

Menu option: Use it to:

Edit

Edit this entry. The phone will prompt you to edit the name and phone
number.

OPTIONS

to

Delete

Erase this entry from the list and allow calls from this number.

32

Using the Alarm Feature

You can set 3 different alarms on each cordless handset so your phone can remind you of important
events. When an alarm is set, the alarm icon (

Setting an alarm

1. Open the menu and select Handset Setup.

2. Select Alarm Setting, and then select the alarm (Alarm1, Alarm2, or Alarm3) you want to

set.

) appears on the top of the screen.

3. To turn on the alarm, select

On. The phone goes to the alarm edit screen.

Alarm 1

Time setting

Repeat setting

Ringer tones setting

4. Highlight the time setting and press

5. Use the number keys to set the time you want the alarm to ring; press

fi nished.

6. Highlight the repeat setting and press
once only (1 time), every day (Daily), or on a weekly basis (Select Days)—and then press

OK

.

7. If you choose Select Days, the handset prompts you to choose which days of the week the
alarm should ring. To choose a day, highlight it and
press

SELECT

show that it is selected. Select as many days as you
want, and then press
day with a check mark beside it.

8. Highlight the ringer setting and press

; a check mark appears beside that to

OK

. The alarm will ring on each

00:00AM

1 time

Flicker

SELECT

.

SELECT

SELECT

$#%-

. Select how often you want the alarm to ring—

5'.'%6

5'6

OK

when you have

Select Days
Monday

.

Tuesday

Advanced Operation

9. Select the ring tone you want the alarm to use, and

then press OK.

10. When you have fi nished setting all the alarm options, press
and repeat setting will show on the main

Setting

repeat setting displays as Weekly.)

screen. (If you selected specifi c days, the

Alarm

33

1-5'.'%6$#%-

SET

to activate the alarm. The time

Alarm Setting

08:00AM Weekly

Alarm2

1-$#%-

When an alarm rings

When the day and time on the phone matches the day and time of an alarm setting, the handset
sounds the selected tone and displays the alarm screen.

• The alarm will ring for one minute. To turn off the
alarm, press END. When the phone prompts you to

YES

YES

.

SNOOZE

.

(or

confi rm, press

• To temporarily turn off the alarm, press
just let the alarm ring for the full minute). The alarm will
ring again in fi ve minutes.

• To cancel snooze, press END the next time the alarm rings. When the phone prompts you to
confi rm, press

Alarm

5011<'

Using Voice Message Notifi cation

n Note: This feature supports Frequency-Shift Keying (FSK) message notifi cation. Contact your

voice mail provider for more details.

If you subscribe to a voice mail service, your phone can notify you
when you have a new message waiting on either line. When you have new

messages, the voice message icon (
message light (at the top of the handset) blinks.

Resetting the voice message indicator

If the voice message icon remains after you check your messages, you can
reset it from the base:

) appears in the display, and the new

Advanced Operation

1. With the phone in standby, open the menu and select Global Setup.

2. The phone prompts you to select a line. Select

3. Select

VMWI Reset, and then select Yes to reset the indicator.

Line 1 or Line 2.

34

Using the Answering System

Using the Answering System

Each line has a separate answering system. Whenever you access the answering system, the phone
prompts you to choose a line. After that, any settings or operations will affect only the answering
system for that line. For example, deleting all the messages from the answering system from line 1
does not affect any messages on the answering system for line 2.

Setting Up Your Answering System

Recording your outgoing message

Your personal outgoing message or greeting can be between 2 seconds and 30 seconds long. If you
don’t want to record an outgoing message, the system will use its pre-recorded greeting:

Hello, no one is available to take your call. Please leave a message after the tone.

To record your greeting:

1. Open the menu and select

2. Select

3. Press

4. When you have fi nished, press

5. To keep this greeting, press OK. To delete it and try again, press

Line 1 or Line 2, and then select Record Greeting.

START

. Wait for the system to say “Record greeting” and then begin your recording.

Ans. Setup.

STOP

. The system plays back your new greeting.

DELETE

.

Switch between the pre-recorded greeting and your greeting

1. Open the menu and select Ans. Setup.

2. Select

3. The system plays back the current greeting (personal or pre-recorded) for this line. Press

CHANGE

Line 1 or Line 2, and then select Greeting Options.

to switch greetings or OK to keep the current greeting.

Delete your greeting

1. Open the menu and select Ans. Setup.

2. Select Line 1 or Line 2, and then select Greeting Options.

3. While the system plays back the current greeting, press

for this line. (You can’t erase the pre-recorded greeting.)

DELETE

to erase the personal greeting

Advanced Operation

35

Ans. Setup menu options

You can change the answering system options separately for each line. When you select the Ans.

Setup

following options to change the answering system settings for that line:

menu, the phone prompts you to select Line 1 or Line 2. Then, you can choose one of the

Menu option: Use it to:

Security Code

Ring Time

Record Time

Message Alert

Ans. Language

Call Screen

Ans. On/Off

Enter a 2-digit PIN so you can access your answering system from any touch­tone phone. (See “Programming a security code” on page 38.).

Set the number of rings (2, 4, or 6) before the answering system answers the
phone. Choose Toll Saver to have the system pick up after 2 rings if you
have new messages or after 4 rings if you don't.

Set the amount of time callers have to leave a message, either 1 minute or
4 minutes. Choose Announce Only if you don't want the system to let
callers to leave a message.

Have the system beep every 15 seconds when you have a new message; the
beeping stops when you listen to all your new messages. (To mute the alert
without listening to your messages, press any key on the base.)

Change the language of the system's voice prompts.

Turn on the call screen feature so you can hear callers as they leave mes­sages on the base speaker. (See “Screening Your Calls” on page 38.)

Turn your answering system on or off. (To turn your system on or off from the
base, just press ANSWER ON/OFF.)

Advanced Operation

Record
Greeting

Greeting
Options

Record a personal greeting. (See “Recording your outgoing message” on page 35.)

Switch between your personal greeting and the pre-recorded greeting or
delete your personal greeting. (See “Switch between the pre-recorded greeting

and your greeting” on page 35.)

Getting Your Messages

Accessing your system from a handset (remote operation)

You can access your system from a handset whenever the phone is in standby. Only one handset at
a time can access the system through remote operation, and you can’t use remote operation if the
base is using the answering system.

• To start remote operation, open the menu and select

LINE1

or

prompts you to select a line, press

LINE2

• During remote operation, the handset beeps to let you know it’s waiting for your next command.
If you don’t press any keys for 30 seconds, the phone returns to standby.

Retrieve Msg. When the phone

.

36

• The icons on the handset’s number keys and display show you which number key activates each
answering system command; these commands correspond to the answering system keys on the
base:

Icon Command Name Handset key Base key

Play 2 PLAY/STOP

Stop 5 PLAY/STOP

Repeat 1

Skip 3

Delete 4 DELETE

How to operate your answering system

To... From the base

Press PLAY/STOP then select a line. Press 2.

play new messages

restart the current
message

replay previous
messages

The system announces the number of new and old messages, and then plays
the fi rst new message followed by the day and time it was received. Then the
system plays the new messages in the order they were received.

Press PHONEBOOK (

Press PHONEBOOK (
repeatedly until you hear the message
you want to replay.

)/LEFT.

)/LEFT

PHONEBOOK ( )/LEFT

CALLER ID ( )/RIGHT

From a handset
(during remote operation)

Press 1.

Press 1
message you want to replay.

repeatedly until you hear the

Advanced Operation

skip a message

delete a message

delete all of your
messages

play old messages

exit the system Press PLAY/STOP. Press END.

Press CALLER ID ( )/RIGHT.

While the message is playing,
press DELETE.

1. With the phone in standby,
press DELETE.

2. When the system prompts you to

LINE1

or

or

LINE2

LINE2

select a line, press

1. After the system plays the new mes­sages, press PLAY/STOP again.

2. When the system prompts you to
select a line, press

LINE1

Press 3.

While the message is playing,
press 4.

Not available.

.

After the system plays the new mes­sages, press 2.

.

37

Screening Your Calls

Another feature your answering system gives you is call screening. While the system is taking a
message, you can hear the caller on the base speaker (if you turn on Call Screen) or from a
handset.

To... From the base From a cordless handset

hear the caller leaving a
message

answer the call Pick up the corded handset.

mute the call screen without
answering

• If you mute the call screen, the system continues taking the message: it just stops playing
through the speaker.

• Up to four handsets at a time can screen calls. If a fi fth handset tries to screen the call, the
handset sounds an error tone and displays a

Just listen to the caller over the
speaker.

Press MUTE/EXIT. Press

System Busy message.

Press

Press TALK (

SCREEN

)/FLASH.

MUTE

.

.

Using the System While You’re Away from Home

You can also operate your answering system from any touch-tone phone. Before you can use this
feature, you have to program a security code.

Programming a security code

1. With the phone in standby, open the menu and select Ans. Setup.

2. Select

Line 1 or Line 2, and then select Security Code.

3. Use the number keypad to enter a two-digit security code (01 to 99). Press OK when you have
fi nished.

n Note: Remember to make a note of your new security code!

Dialing in to your system

Advanced Operation

1. Call your telephone number and wait for the system to answer. (If your answering system is off, it

will answer after about ten rings and sound a series of beeps instead of your greeting.)

2. During the greeting (or beeps), press 0 and immediately enter your security code. (You have 3
tries to enter you security code: if you enter it wrong 3 times, the system hangs up and returns
to standby.)

3. The system announces the current time, the number of
messages stored in memory, and a help prompt. Then it
starts beeping intermittently to let you know it’s waiting for
your command.

4. When you hear the intermittent beeping, enter a command
from the chart to the right.

n Note: If you don’t press any keys for 15 seconds, the phone

will hang up and return to standby.

0-1 Repeat message
0-2 Play message
0-3 Skip message
0-4 Delete message
0-5 Stop playback
0-6 Turn the system on
0-9 Turn the system off

1-0 Hear help prompts

38

Additional Information

Additional Information

Troubleshooting

If you have any trouble with your phone, try these simple steps fi rst.

If… Try…

No stations can make or
receive calls.

One cordless handset
can’t make or receive
calls.

A station can make calls,
but it won’t ring.

I can't make or receive
calls on line 2.

I can't conference line 1
and line 2 together.

I can't make or receive
calls while the power
is out.

A cordless handset's
display won't turn on.

- Checking the telephone cord connection.

- Disconnecting the base AC adapter. Wait a few minutes, and then
reconnect it.

- Moving the handset closer to the base.

- Resetting the handset.

- Making sure the ringer is turned on.

- Making sure Do Not Disturb is turned off. (See “Using Do Not Disturb”
on page 31.)

- Making sure line 2 is properly connected. (See “2 Connect the Phone
Base” on page 5.)

- Checking the dial mode on line 2.

- Seeing if another station has activated Privacy Mode on line 2.

- Making sure you have subscribed to 2 separate lines from your
phone company.

- Seeing if another station has activated Privacy Mode on one of the
lines. (See “Using Privacy Mode” on page 29.)

- Making sure you using the corded handset on the base.

- Checking the telephone cord connection.

- Charging the battery for 15-20 hours.

- Checking the battery pack connection.

A cordless handset is
not working.

A cordless handset says

Unavailable.

No stations will
display any Caller ID
information.

I can't dial from the
Caller ID list.

Caller ID displays briefl y
and then clears.

I can’t transfer calls.

- Charging the battery for 15-20 hours.

- Checking the battery pack connection.

- Resetting the handset.

- Moving the handset closer to the base.

- Seeing if another station has Privacy Mode on. (See “Using Privacy
Mode” on page 29.)

- Making sure the base is plugged in.

- Letting calls ring at least twice before answering.

- Seeing if the call was placed through a switchboard.

- Checking with your telephone service provider to make sure your
Caller ID service is active.

- Making sure you entered the correct area code. If you have to dial
all 10 digits, you need to delete the area code. (See “Using Seven-Digit
Dialing” on page 25.)

- You may have to change the line mode. Contact customer service
for more information.

- Resetting all the handsets. (See “Resetting and Registering Handsets” on
page 42.)

Additional Info

39

If… Try…

I can’t get two cordless
handsets to talk to the
caller.

The phone keeps
ringing if I answer on an
extension.

I can't save a number to
an existing phonebook
entry.

The answering system
does not work.

The answering system
won't record messages.

A handset can't access
the answering system.

My outgoing message
is gone.

I can’t hear the base
speaker.

- Making sure both handsets are registered to this base.

- Making sure no station is in Privacy Mode. (See “Using Privacy Mode”
on page 29.)

- You may have to change the line mode. Contact customer service
for more information.

- Seeing if the number is already in the phonebook.

- Seeing if that entry already has two phone numbers.

- Making sure the answering system is turned on.

- Making sure the base AC adapter is not plugged into an that's con­trolled by a wall switch.

- Making sure the
(See “Ans. Setup menu options” on page 36.)

- Deleting messages (the memory may be full).

- Making sure no other handset is using the system.

- Making sure the phone is in standby.

- Seeing if there was a power failure. You may have to re-record your
personal outgoing message.

- Making sure call screening is turned on. (See “Ans. Setup menu options”
on page 36.)

- Changing the base speaker volume.

Record Time is not set to Announce Only.

Messages are
incomplete.

The system keeps
recording if I answer on
an extension.

I can't register a
handset.

My alarm rings at the
wrong time.

My alarm won't ring on
the right day(s).

- The incoming messages may be too long. Remind callers to leave a
brief message.

- Deleting messages (the memory may be full).

- You may have to change the line mode. Contact customer service
for more information.

- Seeing if there are 10 handsets registered to this base.

- Resetting the handset.

- Making sure the time is set correctly. (See “The Clock Setup Menu” on
page 19.)

- Making sure the days are selected. (See “Setting an alarm” on page 33.)

- Making sure the date is set correctly. (See “The Clock Setup Menu” on
page 19.)

Weak or hard to hear audio

If a caller’s voice sounds weak or soft, the signal might be blocked by large metal objects or walls;

Additional Info

you might also be too far from the base, or the handset’s battery may be weak.

• Try moving around while you’re on a call or moving closer to the base to see if the sound gets
louder.

• Make sure the handset’s battery is fully charged.

• Try adjusting the earpiece volume.

40

Noise or static on the line

Interference is the most common cause of noise or static on a cordless phone. Here are some
common sources of interference:

• electrical appliances, especially microwave
ovens

• computer equipment, especially wireless
LAN equipment and DSL modems

• radio-based wireless devices, such as room
monitors, wireless controllers, or wireless
headphones or speakers

• large fl uorescent light fi xtures (especially if
they give off a buzzing noise)

• other services that use your phone line,
like alarm systems, intercom systems, or
broadband Internet service

Here are some hints for when the static is...

on 1 handset or in 1 location: on all handsets or in all locations:

Do you use a T-coil hearing aid?

If you have a hearing aid equipped with
a telecoil (T-coil) feature, the interaction
between the hearing aid and digital cordless
phones can cause noise in the handset. If
you have a T-coil hearing aid and you have
problems with noise on the line, try turning
on

T—coil mode. Open the menu; select

Handset Setup, and then select T—coil.

Using T-coil mode can shorten the
handset’s talk time; make sure to watch
the battery status and keep the battery
charged.

- Check nearby for one of the common inter-

ference sources.

- Try moving the handset away from a sus-

pected source, or try moving the suspected
source so it’s not between the handset and
the base.

- Try moving closer to the base. There is always

more noise at the edges of the base's range.
If the handset displays an
message, you need to move closer to the
base.

Out of Range

- Check near the base for the source of
interference.

- Try moving the base away from a suspected
source, or turn off the source if possible.

- If the base has an adjustable antenna, try
raising the antenna so it stands straight up.

- If you have any service that uses the phone
line, you might need a fi lter (see below).

Installing a line fi lter or DSL fi lter

Sometimes, broadband Internet services that use the telephone line can interfere with phones. One
of these services−DSL−often causes static on telephones. A DSL fi lter or telephone line fi lter usually
solves this problem. The technician who installed your DSL service might have left some fi lters for
you; if not, call your DSL provider or look in any electronics store.

Plug the DSL fi lter into the telephone wall jack and plug
your phone’s base into the fi lter. Make a test call to make
sure the noise is gone.

Telephone
wall jack

Additional Info

41

Telephone

cord

DSL filter

Resetting and Registering Handsets

If you are having trouble with a cordless handset or if you want to replace one, you need to clear the
registration information from the base and the handset:

Do you have the base the handset is registered to?

1. Press and hold END and # until the

2. Select Deregister HS. The display lists all registered handsets.

3. Select the handset you want to reset.

Yes

4. When the handset asks you to confi rm, select Yes. (It may ask you twice, just to be sure.)
The handset clears its information from the base and deletes its own link to the base.

1. Press and hold END and # until the

2. Select Base Unavailable.

No

3. When the handset asks you to confi rm, select Yes. (It may ask you twice, just to be sure.)
The handset deletes its own link without contacting the base.

When you reset a handset (or if you buy a new one), that handset displays a

Registered

before you can use it.

message. If you see this message on a handset, you need to register it to a base

System Reset menu appears (about 5 seconds).

System Reset menu appears (about 5 seconds).

Handset Not

Registering a handset

1. On the base, open the menu and select Register Handset.

2. On the handset you want to register, press and hold # until the handset display says

Registering

3. In about 30 seconds, the handset display should say
Press TALK ( )/FLASH and make sure you get a dial tone.

(about 2 seconds).

Registration Complete.

Handset

If... Try...

- you don't hear a dial tone

- the display says

Registration Failed

making sure the handset is fully charged,
and then start over at step 1.

n Note: To register a handset to a different base, see the section “Expanding Your Phone” in the

user’s guide for the other base.

Additional Info

42

Handling Liquid Damage

Moisture and liquid can damage your phone.

• If the handset or base is exposed to moisture or liquid, but only the exterior plastic housing is
affected, wipe off the liquid, and use as normal.

• If moisture or liquid has entered the plastic housing (i.e. liquid can be heard in the phone or
liquid has entered the handset battery compartment or vent openings on the base), follow these
steps:

Handset Base

1. Remove the battery cover and disconnect the battery.

2. Let dry for at least 3 days with the battery discon-

nected and the cover off for ventilation.

3. After the handset dries, reconnect the battery pack

and replace the cover. Recharge the battery fully
(15-20 hours) before using.

1. Disconnect the AC adapter to cut
off the power.

2. Disconnect the telephone cord.

3. Let dry for at least 3 days before

reconnecting.

n Note: You must unplug the telephone line while recharging the battery pack to avoid charge

interruption.

w Caution: DO NOT use a microwave oven to speed up the drying process. This will cause

permanent damage to the handset, base and the microwave oven.

Specifi cations

AC Adapter Input Voltage ...................................................................................... Base: 120V AC, 60 Hz

Charger: 120V AC, 60 Hz

AC Adapter Output Voltage ...............................................................................Base: 7.8V AC @ 450mA

Charger: 8V AC @ 300mA

Battery Capacity ......................................................................................................... 2.4V DC @ 500mAh

• Use only the supplied AC adapters.

• Be sure to use the proper adapter for the base and any chargers.

• Do not place the power cord where it creates a trip hazard or where it could become chafed and
create a fi re or electrical hazard.

• Do not place the base in direct sunlight or subject it to high temperatures.

Additional Info

43

Glossary

Accessory Handset...... An extra handset that can register to and be used with an expandable phone

base. All accessory handsets must be registered to a base.

Base ............................... The main part of the phone. It connects to your phone line and lets you

make and receive calls. Most bases also have a cradle to store a handset.

CIDCW........................... (CID on Call Waiting.) A service that shows CID for calls that come in during

another call.

Call Waiting .................. A service that lets you receive calls while you are on another call.

Caller ID ....................... (Also called CID.) A service that shows the name and number of incoming

callers.

Charger ......................... A cradle that stores and charges a handset but doesn’t connect to the phone

line.

Cradle ............................ The part of the phone that stores a handset. While in a cradle, a handset is

always in standby, and any keys are locked.

During a call ................. The station is currently on a call or has activated a dial tone.

Handset ......................... 1) A cordless handset that you use to dial the phone and talk to callers.

2) A corded handset that attaches to a base with a coiled cord.

In standby .................... The phone is inactive: there is no dial tone, no station is on a call or listening

to messages.

Line 1 and Line 2 ......... On a two-line jack, line 1 is connected to the inner pair of wires, and line

2 is connected to the outer pair of wires. If you want to switch the lines,
contact your phone company. On single-line jacks, line 1 is connected to
TEL LINE 1/2, and line 2 is connected to TEL LINE 2. You can switch Line 1
and Line 2 just by swapping the connectors.

Off hook ........................ The phone is connected to an outside line: there is a dial tone or an ongoing

call.

Soft key ......................... A software-controlled button that can change its function to fi t the current

operation.

Station ........................... Any handset or the base.

Additional Info

44

FCC Information

Any changes or modifi cations not expressly approved by the party responsible for compliance could
void the user’s authority to operate this device.

This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA.
On the bottom of this equipment is a label that contains, among other information, a product identifi er
in the format US: AAAEQ##TXXXX. If requested, this number must be provided to the telephone
company. An applicable Universal Service Order Codes (USOC) certifi cation for the jacks used in this
equipment is provided (i.e., RJ11C) in the packaging with each piece of approved terminal equipment.
A plug and jack used to connect this equipment to the premises wiring and telephone network must
comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA.

A compliant telephone cord and modular plug is provided with this product. It is designed to be con­nected to a compatible modular jack that is also compliant. See installation instructions for details. The
REN is used to determine the number of devices that may be connected to a telephone line. Excessive
RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most
but not all areas, the sum of RENs should not exceed fi ve (5.0).

To be certain of the number of devices that may be connected to a line, as determined by the total
RENs, contact the telephone provider. For products approved after July 23, 2001, the REN for this
product is part of the product identifi er that has the format US:AAAEQ##TXXXX. The digits repre­sented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the
REN is separately shown on the label.

If this equipment causes harm to the telephone network, the telephone company will notify you in
advance that temporary discontinuance of service may be required. But if advance notice isn’t practical,
the telephone company will notify the customer as soon as possible. Also, you will be advised of your
right to fi le a complaint with the FCC if you believe it is necessary. The telephone company may make
changes in its facilities, equipment, operations or procedures that could affect the operation of the
equipment. If this happens the telephone company will provide advance notice in order for you to
make necessary modifi cations to maintain uninterrupted service.

Please follow instructions for repairing if any (e.g. battery replacement section); otherwise do not
alternate or repair any parts of device except specifi ed.

Connection to party line service is subject to state tariffs. Contact the state public utility commission,
public service commission or corporation commission for information.

This equipment is hearing aid compatible.
NOTICE: If your home has specially wired alarm equipment connected to the telephone line, ensure

the installation of this equipment does not disable your alarm equipment. If you have questions about
what will disable alarm equipment, consult your telephone company or a qualifi ed installer.

If trouble is experienced with this equipment, for repair or warranty information, please contact a
Factory Service Center or other Authorized Servicer. If the equipment is causing harm to the telephone
network, the telephone company may request that you disconnect the equipment until the problem is
resolved.

NOTICE: According to telephone company reports, AC electrical surges, typically resulting from
lightning strikes, are very destructive to telephone equipment connected to AC power sources. To
minimize damage from these types of surges, a surge arrestor is recommended.

Additional Info

RF exposure information

This product complies with FCC radiation exposure limits set forth for an uncontrolled environment.

• To comply with FCC RF exposure requirements, the base unit must be installed and operated 20 cm
(8 inches) or more between the product and all person’s body (excluding extremities of hands, wrist
and feet).

• This product may not be collocated or operated in conjunction with any other antenna or transmitter.

• The handset may be carried and operated with only the specifi c provided belt-clip. Other non-tested
belt-clips or similar body-worn accessories may not comply and must be avoided.

This device complies with part 15 of the FCC rules. Operation is subject to the following two condi­tions: (1) This device may not cause harmful interference, and (2) This device must accept any interfer­ence received, including interference that may cause undesired operation. Privacy of communications
may not be ensured when using this phone.

45

Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encour­aged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

• Consult the dealer or an experienced radio/TV technician for help.

Product 2-Line Corded/Cordless Phone

Model 43-337

Responsible
Party

Phone [phone]

RadioShack
300 RadioShack Cir.
Fort Worth, TX 76107

Additional Info

46

Limited Warranty

RadioShack warrants this product against defects in materials and workmanship under normal use
by the original purchaser for ninety (90) days after the date of purchase from a RadioShack-owned
store or an authorized RadioShack franchisee or dealer. RADIOSHACK MAKES NO OTHER EXPRESS
WARRANTIES.

This warranty does not cover: (a) damage or failure caused by or attributable to abuse, misuse, failure
to follow instructions, improper installation or maintenance, alteration, accident, Acts of God (such
as fl oods or lightning), or excess voltage or current; (b) improper or incorrectly performed repairs by
persons who are not a RadioShack Authorized Service Facility; (c) consumables such as fuses or bat­teries; (d) ordinary wear and tear or cosmetic damage; (e) transportation, shipping or insurance costs;
(f) costs of product removal, installation, set-up service, adjustment or reinstallation; and (g) claims by
persons other than the original purchaser.

Should a problem occur that is covered by this warranty, take the product and the RadioShack sales
receipt as proof of purchase date to any RadioShack store in the U.S. RadioShack will, at its option,
unless otherwise provided by law: (a) repair the product without charge for parts and labor; (b) replace
the product with the same or a comparable product; or (c) refund the purchase price. All replaced parts
and products, and products on which a refund is made, become the property of RadioShack. New or
reconditioned parts and products may be used in the performance of warranty service. Repaired or
replaced parts and products are warranted for the remainder of the original warranty period. You will
be charged for repair or replacement of the product made after the expiration of the warranty period.

RADIOSHACK EXPRESSLY DISCLAIMS ALL WARRANTIES AND CONDITIONS NOT STATED IN THIS
LIMITED WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW, INCLUDING
THE IMPLIED WARRANTY OF MERCHANTABILITY AND, IF APPLICABLE, THE IMPLIED WARRANTY
OF FITNESS FOR A PARTICULAR PURPOSE, SHALL EXPIRE ON THE EXPIRATION OF THE STATED
WARRANTY PERIOD.

EXCEPT AS DESCRIBED ABOVE, RADIOSHACK SHALL HAVE NO LIABILITY OR RESPONSIBILITY
TO THE PURCHASER OF THE PRODUCT OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO
ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE
OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT
NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE AND ANY LOSS OF TIME,
DATA, PROPERTY, REVENUE, OR PROFIT AND ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSE­QUENTIAL DAMAGES, EVEN IF RADIOSHACK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.

Some States do not allow limitations on how long an implied warranty lasts or the exclusion or limita­tion of incidental or consequential damages, so the above limitations or exclusions may not apply to
you. This warranty gives you specifi c legal rights, and you may also have other rights which vary from
State to State. You may contact RadioShack at: RadioShack Customer Relations
300 RadioShack Circle, Fort Worth, TX 76102 04/08

www.RadioShack.com

Additional Info

47

43-337

User’s Guide

Protect the environment by recycling your used electronics. Go to
E-CyclingCentral.com to fi nd an electronic recycling center near
you.

©2009. RadioShack Corporation.
All rights reserved. RadioShack and RadioShack.com are
trademarks used by RadioShack Corporation.

Printed

in Vietnam

UNZZ01099BA(0)

08A09

43-337