Radio Shack 40-1014A User Manual

g

40-101 4a .fm Page 1 Tuesday, August 10, 1999 12:34 PM

10" Polypropylene Woofer

Your Radio Shack 10" Polypropylene
Woofer lets you increase the bass re­sponse of your sound system,
whether it is a home or car, stereo or
monaural system.

FEATURES

Light, Rigid, Polypropylene Cone

— extra-durable, long-life cone re­sists effects of moisture and tem per­ature extremes, and withstands
greater stress at high volume levels.

Rolled Urethane Foam Surround

— minimizes distortion and im­proves clarity.

Lon

-Thr ow V oic e Co il

clean, solid sound.

— delivers

Cat. No.

40-1014A

MOUNTING

You can install the woofer from the
front or back of an enclosure so it is
flush with the baffle’s surface. Seal
the mounting surface so air cannot
leak around the woofer

For details, see our “Building Speak­er Systems” book (not supplied),
available at your local Radio Sh ack
store.

Radio Shack is a registered trademark used by Tandy Cor poration.

©

1996 Tandy Corporation.

All Rights Reserved.

g

40-101 4a .fm Page 2 Tuesday, August 10, 1999 12:34 PM

SPECIFICATIONS

Nominal Impedance .................................................................................................................8 ohms

Frequency Response ...................................................................................................30 Hz-2500 Hz

Free Air Resonance (Fs) Fre qu ency ................................ ................ ............... ............... ............ 30 Hz

Infinite Baffle Resonance Frequency ......................................................................................... 29 Hz

Piston Area (SD) ......... .... ............... ............... ................ ............... ............... ............... .... .....0.0360 m

Power Handling .................................................................................................................50 W RMS

Maximum Power ....................................................................................................................... 100 W

Flux Density (BL).................................................................................................................... 8.27 TM

DC Voice Coil Resistance (RE, ohms) ..................................................................................6.6 ohms

Voice Coil Inductance (LVC at 1 kHz) ....................................................................................1.13 mH

SPL.......................................................................................................................... 87ð ±2 db/1W/1m

Moving Mass (Mms).................................................................................................................35.19 g

Electrical Q Factor (QES)..............................................................................................................0.61

Mechanical Q Factor (QMS)............................................................................................................4.6

Total Q Factor................................................................................................................................0.54

Equivalent Aco u stic Volume (VAS). .... .... .... ............... ............... ............... ................ ............... ...1 81 .2 l

Mechanical Suspension Compliance (CMS, UM/N)....................................................... 963.17 UM/N

Mechanical Mass of Cone Assembly and Free Air Load..........................................................35.19 g

Mechanical Mass of Cone Assembly Only................................................................................31.14g

Peak-to-Peak (Maxim u m) Line ar Excu rsion.............. .... ... .... .... .... ............... .... ............... .... ....2.25 mm

Cutout ...... ........ ........... ........... ............ ........... ............ ........... ........ ........... ............ .9

Depth................................................................................................................... 3

Magnet Weight ........................................................................................................................ 11.6 oz.

Speaker Weight.......................................................................................................................42.4 oz.

1

/4 Inches/23.5 cm

15

/16 Inches/9.8 cm

2

Specifications are typical; individua l units m ight vary. Specifications are s ub ject
to chan

6A6 Printed in China

e and improvement without notice.

RADIO SHACK

A Division of Tandy Corporation

Fort Worth, Texas 76102