Radio Shack 4-way RF Modulator, 15-1215 User Manual
6/9C["4("/QFWNCVQT
15-1215
1
24
3
Thank you for shopping at RadioShack. Your RadioShack 4-Way RF Modulator is designed to convert the stereo audio and video signals from up to
four home entertainment components, such as a DVD player, satellite, cabl e TV box, or VCR to a convent io na l co axial cable output.
OWNER’S MANUAL
2002 RadioShack Corporation.
©
All Rights Reserved.
Limited Ninety-Day Warranty
This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for ninety (90) days from the
date of purchase from RadioShack company-owned stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN,
RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO CUSTOMER OR ANY
OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTL Y BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so
the above limitations or exclusions may not apply to you.
In the event of a product defect during the warranty period, take the product and the RadioShack sales receipt as proof of purchase date to any RadioShack store. RadioShack will, at its option, unless otherwise provided by law: (a) correct the defect by product repair without charge for parts and
labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase price. All replaced parts and products, and products
on which a refund is made, become the property of RadioShack. New or reconditioned parts and products may be u sed in the perfor m anc e of warranty service. Repaired or replaced parts and products are warranted for the remainder of the original warranty period. You will be charged for repair
or replacement of the product made after the expiration of the warranty period.
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse, accident, misuse, improper or abnormal usage,
failure to follow instructions, improper installation or maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs
other than those provided by a RadioShack Authorized Service Facility; (c) consumables such as fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs of product removal, installation, set-up service adjustment or reinstallation.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102
12/99
%100'%6+105
Your modulator provides four sets of input
jacks that can be used to connect up to four
home entertainment components, and each
set of the input jacks includes one
jack. It can auto-select the video signals if
both S-video and composite signals are
received. S-video signals have the highest
priority.
Connect your antenna or the cable TV’s
output to
with a 75Ω
ANT IN on the back o f the mod ulator
(75-ohm)
F-connector coaxial cable.
Plug the connector on one end of a
75Ω F-connector cable to TO TV on the back
of the modulator, and plug the connector on
the cable’s other end to your TV input
terminal.
Plug the connectors on one end of a stereo
A/V cable into one set of the
yellow),
/ white)
R (audio right / red), a nd L (audio left
INPUT jacks on the modulator. Plug
the connectors on the cable’s other end into
the video and audio output jacks on the
component. Or, you can connect an S-video
cable from the S-VIDEO output of a device to
S-VIDEO INPUT jack on the modulator in
an
lieu of A/V cables.
±"016'"±"
If the component is a game, connect it to
1/GAME PORT.
2QYGTKPI"VJG"/QFWNCVQT
You can power the modulator using the
supplied 9V, 100 mA AC/DC adapter.
."%#76+10".
• You must use a Class 2 power source that
supplies 9V DC and delivers at least 100
mA. Its center tip must be set to positive and
its plug must fit the modulator's
The supplied adapter meets these
specifications. Using an adapter that does
not meet these specifications could damage
the modulator or the adapter.
• If you do not plan to use the modulator for a
week or more, unplug the adapter from the
AC outlet.
Always connect the AC adapter to the
modulator before you c onnect it to AC pow er.
When you finish, disconnec t the adapte r from
S-VIDEO
V (video /
DC 9V
INPUT
jack.
AC power before you disconnect it from the
modulator.
When your connections are complete, insert
the supplied AC adapter’s barrel plu g into the
DC 9V jack on the back of the modu lator, then
plug the adapter into a standard AC outlet.
The LED on the front of the modulator lights.
12'4#6+10
1. Turn on the TV and set it to either
Channel 3 o r 4, whichever is not used
for regular broadcasts in your area.
2. Set the modulator’s CHANNEL 3/4 to the
same channel you set the TV (3 or 4).
3. Press the corresponding component
selector
1/2/3/4 on the front of the
modulator.
."%#76+10".
Never press two or more component selectors
at the same time.
Turn on the connected component and set
75Ω
Ω/1kΩ
Ω (the impedance switch) on the back
ΩΩ
Ω Ω
of the modulator to the posi tion that gives the
best picture.
±"016'"±"
• If the component connected to
INPUT 1/GAME PORT
impedance slide
/
ΩΩΩΩ
ΩΩΩΩ
ΩΩΩΩ
to
1k
1k
75
• The impedance switch only affects
INPUT 1/GAME PORT
To watch the TV’s signal, set the component
selector to an unused component, or set the
selector to a component that is not powered
on.
To de-select a component without selecting
another component, lightly press a different
component’s selector button. Do not fully
compress the button. The depressed button
releases.
, has a
.
.
1k
output
Ω
6*'"(%%"9#065";17"61"
019
-
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
• Consult your local RadioShack store or an
experienced radio/TV technician for help.
• If you cannot eliminate the interference, the
FCC requires that you stop using your
modulator.
Changes or modifications not expressly approved
by RadioShack may cause interference and void
the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the condition that
this device does not cause harmful interference.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
%#4'
Keep the modulator dry. If it gets wet, wipe it dry
immediately. Use and store the modulator only in
normal temperature environments. Handle the
modulator carefully; do not drop it. Keep the
modulator away from dust and dirt, and wipe it with
a damp cloth occasionally to keep it looking new.
If your modulator is not performing as it should,
take it to your local RadioShack store for
assistance. Modifying or tampering with the
modulator’s internal components can cause a
malfunction and might invalidate its warranty and
void your FCC authorization to operate it.
52'%+(+%#6+105
Antenna to TV insert loss – 2.5dB
Output RF system CH 3 & 4 (Selectable)
RF carrier output level – 47dBm
Video modulation (stair step, 1Vp-p input)
Black Level 75%
White level >20%
Audio modulation @ 1KHz 1Vp-p +/– 25KHz
Audio THD @ 1KHz 1Vp-p input 1%
Audio S/N @ 1KHz 1Vp-p input 35dB
Current Drain 50mA
2
Dimensions 8
(220 × 125 × 48 mm)
Weight 15.3 oz (435 g)
Specifications are typical; individual units might
vary. Specifications are subject to change and
improvement without notice.
/3 × 4 15/16 × 1 7/8 Inches
2
Loading...