RAC-HP101
2in1 Pressure Washer with Wet & Dry Vac
Assembly Manual
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or retailer
for recycling advice.
Environmental Protection
Manufactured under license for:
HILKA PRO IMPORTS
This product bears the selective sorting symbol for waste electrical and electronic equipment
(WEEE).
This means that this product must be handled pursuant to European Directive 2002/96/EC
in order to be recycled or dismantled to minimize its impact on the environment.
For further information, please contact your local or regional authorities.
Electronic products not intended in the selective sorting process are potentially dangerous
for the environment and human health due to the presence of hazardous substances.
GUARANTEE
This product is guaranteed for domestic use for a period of 12 months against faulty manufacture or materials.
This guarantee does not affect the statutory rights of the consumer. In the event of any problem occurring
please contact our Helpline at the number above for advice. This product is not guaranteed for HIRE purposes.
-1- -2-
Handle assembly
Locate the handle between
the left & right hand handle
posts and fix with 4 x screws
provided.
Handle Assembly
Shelf Assembly
Assembly Instructions
Shelf
Screws X 2
Handle
4 X Screws
left & right hand
handle posts
Side Post
Place the shelf between the
side posts and fix using
2 X screws provided
-3- -4-
Handle Assembly to Base
Handle Assembly
Locate the handle assembly over
the side posts and fix with 4 x
screws provided.
4 X screws
Side Posts
-5- -6-
Vacuum Cleaner Location
Upper Gun Holder
Location recess
Location points
Base platform
Fix the vacuum cleaner
onto the base platform
using the location points
Lower gun Holder
Locate & push down
to lock into place
Push upper gun holder into
the handel post as shown
Upper & Lower gun holder
-7-
Completed Assembly
Loading...