Quikserv T1-2436S Installation Manual

ALL THREAD ROD

Drawing Name: Scale:

Rev.Drawn By:

Quikserv Corp.

P.O. Box 40466
Houston TX 77240

1-800-388-8307
www.quikserv.com

Date:

T-1 W/ B.R. Glazing

1/25/2010

BC

N/A

Ticket Window With BR Glazing Installation

NOTE:THIS DRAWING EMBODIES A CONFIDENTIAL PROPRIETY DESIGN ORIGINATED AND OWNED BY QUIKSERV CORP., AND IS SUBMITTED UNDER A CONFIDENTIAL

RELATIONSHIP. ALL PATENT, MANUFACTURING, SALE RIGHTS REGARDING THE SAME ARE RESERVED EXCEPT TO THE EXTENT RIGHTS ARE EXPRESSLY GRANTED TO

OTHERS. THE RECIPIENT AGREES BY ACCEPTING THESE DRAWINGS NOT TO SUPPLY OR DISCLOSE ANY INFORMATION REGARDING THEM TO ANY UNAUTHORIZED PERSON.

1) QUIKSERV TICKET WINDOWS MUST BE INSTALLED LEVEL
AND SQUARE TO WORK PROPERLY.

2) ANCHOR SCREWS TO BE SUPPLIED BY CONTRACTOR.

3) REMOVE THE B.R. GLAZING FROM THE INTERIOR SIDE
OF THE TICKET WINDOW FRAME AND SET ASIDE.

4) SLIDE TICKET WINDOW THROUGH THE ROUGH OPENING.
THE QUIKSERV NAME PLATE FACES THE EXTERIOR OF
THE BUILDING.

5) INSTALL THE ANCHOR SCREWS THOUGHT THE PREDRILLED
HOLES. (SEE FIG. 1)

8) SILICONE ALL EXTERIOR AND INTERIOR JOINTS.

9) ALL OTHER TYPE OF ANCHORING TO BE APPROVED
BY CERTIFIED ENGINEER.

TYPICAL INSTALLATON FOR

B. R. TICKET WINDOW

ANCHOR SCREWS TO BE #14 X 3-1/2".

Job:

6) RE-INSTALL THE B.R. GLAZING INTO THE TICKET WINDOW
FRAME. (SEE FIG. 2 & 3)

7) INSTALLER SHOULD RE-ANCHOR THE U-CHANNEL PROVIDED
AROUND BACKSIDE OF THE B.R. GLAZING. (SEE FIG. 3)