Quikserv SC-4030-IP Installation Manual

FIG. B

TO BE SUPPLIED

ANCHOR SCREWS

BY OTHERS.

1" PVC TUBE

1" PVC TUBE

FIG. A

SHIPPING PIN

FIG. C

BY OTHERS.

TO BE SUPPLIED

ANCHOR SCREW

Drawing Name: Scale:

Rev.Drawn By:

Quikserv Corp.

11441 Brittmoore Park Dr
Houston TX 77041

1-800-388-8307
www.quikserv.com

Date:

SC-4030-IP Installation Drawing

9/13/2014

BC

N/A

SC-4030IP Installation Drawing

Rough Opening:

Actual Dimension:

Service Opening:

NOTE:THIS DRAWING EMBODIES A CONFIDENTIAL PROPRIETY DESIGN ORIGINATED AND OWNED BY QUIKSERV CORP., AND IS SUBMITTED UNDER A CONFIDENTIAL

RELATIONSHIP. ALL PATENT, MANUFACTURING, SALE RIGHTS REGARDING THE SAME ARE RESERVED EXCEPT TO THE EXTENT RIGHTS ARE EXPRESSLY GRANTED TO

OTHERS. THE RECIPIENT AGREES BY ACCEPTING THESE DRAWINGS NOT TO SUPPLY OR DISCLOSE ANY INFORMATION REGARDING THEM TO ANY UNAUTHORIZED PERSON.

48-3/8" (W) X 36-3/8" (H)

48" (W) X 36" (H)

20-1/4" (W) X 29" (H)

BY CERTIFIED ENGINEER.

JAMB- DEPENDING ON LEFT HANDED OR RIGHT. (SEE FIG. B)

3) ANCHOR PER FLORIDA BLDG. CODE ANCHOR SCHEDULE.

8) ALL OTHER TYPE OF ANCHORING TO BE APPROVED

TO BE 36". (CHECK ANY AND ALL LOCAL OR CITY CODES)

6) RECOMMENDED HEIGHT FROM FLOOR TO SERVICE OPENING

DRILLING INTO 1" PVC TUBE WILL VOID WARRANTY.

5) CAUTION A 1" PVC TUBE IS LOCATED IN THE LOCKSIDE

2) REMOVE SHIPPING PIN BEFORE INSTALLING WINDOW.

SQUARE TO WORK PROPERLY.

1) QUIKSERV WINDOWS MUST BE INSTALLED LEVEL AND

TYPICAL

SC-4030-IP INSTALLATION

7) SILICONE ALL EXTERIOR AND INTERIOR JOINTS.

4) ANCHOR SCREWS TO BE SUPPLIED BY CONTRACTOR.

SHIPPING PIN LOCATED IN LOCKSIDE JAMB. (SEE FIG. C)