
WIRELESS PRODUCTS
Airborne™ Accessories
ACH2-AT-DP000 Antennas
ACH0-CA-DP000 Adapter Cables
AirborneTMAccessories are designed for connection
to 802.11 wireless devices operating in the
2.4GHz ISM band. These accessories fully support
the entire line of Airborne
TM
wireless 802.11 products.
This wide assortment is intended to provide OEMs
with solutions that meet the demanding and diverse
requirements for any application including
transportation, medical, warehouse logistics, POS,
industrial, military and scientific applications. OEMs
can select from these fully tested accessories or
integrate their own solution.
Applications
The AirborneTMAntenna family offers antennas
for embedded applications, fixed stations, mobile
operation and client side devices, and for indoor
and outdoor applications. The antennas feature
RP-SMA, N-type and U.FL connectors that
provide the designer with flexible ways to connect
to Airborne wireless products.
A wide range of antenna types and gain options
enable an OEM to select the antenna that best
matches their application requirements. The
lower gain and smaller antennas, such as the
“rubber duck” antennas, fit applications
where the range is not required to exceed 200400m while the higher gain directional antennas
would be suitable for extended range that require
greater than 800m reach.
Specialty Antenna
To meet the demands for targeted solutions in the
transportation industry, consider the ACH2AT-DP011, a low profile, mobile, high gain omnidirectional whip antenna with an integrated
magnetic mount.
Customized antenna options are also available.
Recommended for Airborne
TM
802.11
embedded and external system bridge
products
All accessories support Airborne products
in OEM applications in all industries
Antennas designed for external mounting,
mobile or fixed station, and indoor and/or
outdoor operation
Select from a variety of radiation patterns
and gain options to suit your application
RP-SMA, N-Type and U.FL connectors
supported
Adapter cables also available
30B270-00
Rev. B 11/05
This document contains information on a product that is currently released to production at DPAC Technologies Corp. and Quatech, Inc.
DPAC and Quatech reserve the right to change products or specifications herein without prior notice.
Page 1 of 2

30B270-00
Rev. B 11/05
Page 2 of 2
DPAC Technologies Products & Services for the integration Age
7321 Lincoln Way, Garden Grove, CA 92841 Tel 714 898 0007 Fax 714 897 1772 www.dpactech.com
©2005 DPAC Technologies and Quatech, Inc. All rights reserved. DPAC Technologies®, Airborne™ are trademarks of DPAC Technologies Corp.
WIRELESS PRODUCTS
Airborne™ - Antenna Product Family
Product Line
Adapter Cable RP-SMA (Jack) to U.FL (Plug)
ACHO-CA-DP004
Adapter Cable U.FL (Plug) to U.FL (Plug)
ACHO-CA-DP001
This adapter is designed to provide an enclosure-mountable direct
cable connection to the Airborne
TM
embedded modules. The DP004
eliminates the need for board-level design or RF layout by enabling a
direct Coaxial connection between the Airborne module and an RPSMA Jack. An RP-SMA jack can be directly mounted to the equipment
enclosure.
This adapter makes the connection from the AirborneTMembedded
module to a board-mounted U.FL connector. This allows a direct coaxial
connection between the AirborneTMmodule and the main-board.
Connection to the antenna can then be made through routing and
appropriate board mounted connector.
Model No. Description Indoor/Outdoor Internal/External Gain Connector Style Radiation Pattern
ACH2-AT-DP002 2Dbl Portable(Rubber duck) Antenna (RP-SMA) I E 2 dBi RP-SMA Whip Omni
ACH2-AT-DP003 5Dbl Portable (Rubber duck) Antenna (RP-SMA) I E 5 dBi RP-SMA Whip Omni
ACH2-AT-DP004 5Dbl Portable(Rubber duck) Antenna, Flying Lead (U.FL) I E 5 dBi U.FL Whip Omni
ACH2-AT-DP005 15 dBi Corner Reflector Antenna (RP-SMA), Indoor/Outdoor I/O E 15 dBi RP-SMA
Corner
Reflector
Directional
ACH2-AT-DP006 7 dBi Patch (RP-SMA) Antenna, Indoor/Outdoor I E 7 dBi RP-SMA Patch Directional
ACH2-AT-DP007 8.5 dBi Fiberglass Omnidirectional Antenna (N-Type) Indoor/Outdoor I/O E 8.5 dBi N-type Fiberglass Omni
ACH2-AT-DP008 10 dBi Patch Antenna (RP-SMA) Indoor/Outdoor I/O E 10 dBi RP-SMA Patch Directional
ACH2-AT-DP009 20 dBi Panel (N-Type) Antenna, Indoor/Outdoor I/O E 20 dBi N-Type Patch Directional
ACH2-AT-DP010 11 dBi Fiberglass Omnidirectional Antenna (N-Type) Indoor/Outdoor I/O E 11 dBi N-Type Fiberglass Omni
ACH2-AT-DP011 5 dBi Magnetic mount vehicle Antenna, Indoor/Outdoor I/O E 5 dBi RP-SMA
Whip -
Magnetic
mount
Omni
Model No. Other Accessories
Indoor/Outdoor Internal/External Connector Cable Length
ACH0-CA-DP001 Adapter Cable, U.FL (plug) to U.FL (plug), 200mm, Internal - I U.FL to U.FL 200mm
ACH0-CA-DP004 Adapter Cable, RP-SMA (Jack) to U.FL (plug), 100mm, Indoor/Outdoor I/O - RP-SMA 100mm