Qualcast
45.4cc Petrol Chainsaw
Original Manual PCS46Z
Technical Support & Parts
01904 727500
www.gardenservicecentre.co.uk
Important - Please read these instructions fully before starting assembly.
These instructions contain important information that will help you get the best from your chainsaw, ensuring it is assembled correctly and safely.
If you need help or have damaged or missing parts, call the Customer Helpline on 01904 727500 prior to returning product to store.
July 2014 Rev A
Contents
Safety Information.............................................................................................................................................. |
3 |
In the Box........................................................................................................................................................... |
9 |
Preparing to Operate the Chainsaw............................................................................................................... |
10 |
Operating the Chainsaw................................................................................................................................. |
14 |
Maintenance and Storage............................................................................................................................... |
19 |
Troubleshooting............................................................................................................................................... |
24 |
Technical Data................................................................................................................................................. |
25 |
Disposal........................................................................................................................................................... |
26 |
Getting Help..................................................................................................................................................... |
26 |
Guarantee........................................................................................................................................................ |
27 |
2 |
Customer Helpline 01904 727500 |
|
www.gardenservicecentre.co.uk |
||
|
Safety Information
Important - Please read these instructions fully before operation or maintainance
Warning Symbols
The following warning symbols appear through this manual and indicate the appropriate safety measures you should take when operating and maintaining the chainsaw.
Before any use, refer to the corresponding paragraph in the present manual.
This symbol, before a safety comment, indicates a precaution, a warning or a danger. Ignoring this warning can lead to an accident for yourself or for others. To limit the risk of 
injury, fire, or electrocution always apply the recommendations indicated.
Conforms to European standards.
The exhaust gas is poisonous and asphyxiating. If inhaled it may even be lethal. Do not operate the engine in closed or poorly ventilated places.
Petrol and petrol vapours are extremely inflammable.
Do not touch to prevent burns.
Wear hearing protection and eye protection when using the device.
Wear robust footwear when using the device.
Wear protective gloves when using the device.
Customer Helpline 01904 727500 |
3 |
|
www.gardenservicecentre.co.uk |
||
|
Safety Information
Important - Please read these instructions fully before operation or maintainance
Warning Symbols
Guaranteed Sound power level data (115dB) in accordance with Directive 2000/14/EC
Beware of kickback (recoil).
Avoid contact with the tip of the guide bar (chain return point). This will result in kickback of the chainsaw.
Do not hold the saw with one hand.
Hold the saw firmly with both hands. Place your right hand on the rear handle and your left hand on the front handle.
Do not start or use the equipment close to people (especially children) or animals. During operation, it is recommended that a minimum distance of 10 metres from other people be maintained.
General Safety
The chain is designed exclusively for sawing wood. You may only fell trees if you have received the appropriate training. The manufacturer cannot be held liable for damage caused by improper or incorrect usage.
Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for the equivalent purposes.
Safety Information
Important - Please read these instructions fully before operation or maintainance
General Safety
WARNING!
-Keep this operating and maintenance manual in a safe place for reference at a later date.
-Read the instructions carefully. Be familiar with the controls and the proper use of the equipment.
-Never allow children or people unfamiliar with these instructions to use the chainsaw. Local regulations can restrict the age of the operator.
-Never saw while people, especially children or pets are nearby. Keep in mind that the user is responsible for accidents or hazards occurring to other people or their property.
-This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
-Do not touch chain.
Preparation
WARNING!
-DO NOT operate a chainsaw with one hand! Serious injury to the operator, helpers, bystanders or any combination of these persons may result from one-handed operation. A chainsaw is intended for two-handed use only.
-Do NOT use the saw if you are tired, ill or under the influence of alcohol and/or drugs.
-Use safety footwear, snug-fitting clothing, protective gloves as well as eye, hearing and head protection devices.
-Use caution when handling fuel. Move the chainsaw at least 10 feet (3m) away from the fueling point before starting the engine.
-DO NOT allow other persons to be near when starting or cutting with the chainsaw. Keep bystanders and animals out of the work area.
-DO NOT start cutting until you have a clear work area, secure footing, and a planned retreat path from falling trees or branches.
4 |
Customer Helpline 01904 727500 |
Customer Helpline 01904 727500 |
5 |
|
www.gardenservicecentre.co.uk |
www.gardenservicecentre.co.uk |
|||
|
|
Safety Information
Important - Please read these instructions fully before operation or maintainance
Operation
WARNING!
-Keep all parts of your body away from the saw’s chain when the engine is running.
-Before you start the engine, make sure that the chain is not in contact with anything.
-Carry the chainsaw with the engine stopped, the chain bar and saw chain facing rearwards, and with the exhaust away from your body.
-NEVER use a chainsaw which is damaged, incorrectly set, incomplete or loosely assembled. Make sure that the chain rotation stops when the chain brake is applied.
-Shut off the engine before setting the chainsaw down.
-Use extreme caution when cutting a small size bush and saplings because slender material may catch in the saw chain and be whipped towards you or pull you off balance.
-When cutting a limb that is under tension, be alert for spring back so that you will not be struck when the tension in the wood fibers is released.
-Keep the handles dry, clean, and free of oil or fuel mixture.
-Operate the chainsaw only in well-ventilated areas.
-DO NOT operate a chainsaw from in a tree unless you have been specifically trained to do so.
-All chainsaw servicing, other than the items listed in the user manual safety and maintenance instructions should be performed by competent chainsaw service personnel.
-When transporting your chainsaw, use the appropriate chain bar cover.
-DO NOT operate your chainsaw near or around flammable liquids or gases whether in or out of doors. An explosion and/or fire may result.
-Do not fill the fuel tank, oil reservoir or lubricate whilst the engine of the chainsaw is running.
-USE THE CORRECT TOOL: Cut wood ONLY. Do not use the chainsaw for purposes for which
it was not intended. For example, do not use the chainsaw for cutting plastic, masonry or building materials.
- The engine will create toxic exhaust fumes as soon as the engine is started. Never work in enclosed areas or in areas with poor ventilation.
NOTE! The chainsaw is designed for non-commercial, occasional use for general work such as stump grubbing, cutting firewood, etc. It is not designed for lengthy use. If it is used for a lengthy period, the vibrations it causes in the hands of the user may result in circulation problems (white finger syndrome).
- The chain is designed exclusively for sawing wood. You may only fell trees if you have received the appropriate training. The manufacturer cannot be held liable for damage caused by improper or incorrect usage.
6 |
Customer Helpline 01904 727500 |
|
www.gardenservicecentre.co.uk |
||
|
Safety Information
Important - Please read these instructions fully before operation or maintainance
Operation (continued)
- Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for the equivalent purposes.
Kickback
Kickback may occur when the nose or tip of the chain bar touches an object, or when the wood closes in and pinches the saw chain in the cut. If the bar tip contacts, it may cause a extremely fast reverse reaction, kicking the chain bar up and back towards the operator. Pinching the saw chain along the top of the chain bar may push the chain bar rapidly back towards the operator.
Either of these reactions may cause you to lose control of the saw, which could result in serious personal injury. Do not rely exclusively upon the safety devices built into your saw. As a chainsaw user, you should take several steps to keep your cutting jobs free from accident or injury.
NOTE! With a basic understanding of kickback, you can reduce or eliminate the element of surprise. Sudden surprise contributes to accidents.
-Keep a good firm grip on the saw with both hands, the right hand on the rear handle, and the left hand on the front handle, when the engine is running. Use a firm grip with thumbs and fingers encircling the chainsaw handles. A firm grip will help you reduce kickback and maintain control of the saw. Never let go of the Chainsaw.
-Make sure that the area in which you are cutting is free from obstructions. Do not let the nose of the chain bar contact a log, branch, or any other obstruction which could be hit while you are operating the saw.
-Cut at high engine speeds.
-Do not overreach or cut above shoulder height.
-Follow the manufacturer’s sharpening and maintenance instructions for the saw chain.
-Only use replacement bars and chains specified by the manufacturer or the exact equivalent.
-PINCHING the saw chain along the BOTTOM of the cutting (chain) bar may PULL the saw forward away from the operator.
-PINCHING the saw chain along the TOP of the cutting (chain) bar may PUSH the chain bar rapidly back towards the operator.
-Any of these reactions may cause you to lose control of the saw, which could result in serious personal injury.
Customer Helpline 01904 727500 |
7 |
|
www.gardenservicecentre.co.uk |
||
|
Safety Information
Important - Please read these instructions fully before operation or maintainance
Kickback (continued)
Beware of the following: Rotary recoil. A = Recoil direction
B = Recoil reaction zone
Impact/Jamming recoil and pulling reactions
When cutting from under an object (See Pic D) using the top of the chain the object may pinch the chain and cause either a forward force on the chainsaw or a rearward force on the object (See Pic C).
When cutting from the top surface of an object (Pic E) using the bottom of the chain the object may pinch the chain and cause either a rearward force on the chainsaw or a forward force on the object.
Maintenance and Storage Safety
-Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition;
-Never store the equipment with petrol in the tank inside a building where fumes can reach an open flame or spark;
-Allow the engine to cool before storing in any enclosure;
-To reduce the fire hazard, keep the engine, silencer and petrol storage area free of hedge, leaves, or excessive grease;
-Replace worn or damaged parts for safety;
-If the fuel tank has to be drained, this should be done outdoors.
NOTE! Dispose of soiled maintenance material and operating materials at the appropriate collection point. Recycle packaging material, metal and plastics.
In the Box
Parts |
Tools |
|
|
A Chainsaw |
1 |
Screw driver |
3 Mixing bottle |
|
2 |
Plug wrench |
|
A
|
|
40: 1 |
|
1 |
5 |
|
|
|
|
|
3 |
|
|
2.5 5 |
2 |
|
2.5 |
You will also need 2-Stroke engine oil according JASO FC classic, unleaded fuel and special chainsaw oil.
Any parts missing? Call the customer helpline on 01904 727500, most parts can be send out on next day delivery.
8 |
Customer Helpline 01904 727500 |
Customer Helpline 01904 727500 |
9 |
|
www.gardenservicecentre.co.uk |
www.gardenservicecentre.co.uk |
|||
|
|
Loading...