Quadrone Pro-Cam AW-QDR-PCAM Instruction Manual

• Four axis structure makes the quadcopter for flexible and faster for flying.

•It is wind resistant and can be flown indoor and outdoor.

• Built in 6 axis gyroscope for precise hovering in the sky.

• Simple design makes changing parts easy.

• Comes with 360 degree flips and throwing take off features.

The materials and specifications mentioned in this manual or the parts in this package are for reference only.

Key features of quadrone

INSTRUCTION MANUAL

4CH 2.4G REMOTE CONTROL QUADCOPTER

AWW INDUSTRIES™ is an innovative division of DGL Group, Ltd.
Other trademarks and trade names are those of their respective owners.

AWW INDUSTRIES,
195 Raritan Center Parkway, Edison, NJ 08837.

Specifications, colors and contents may vary from illustrations.

WARNING: This product may
contain a chemical known to
the State of California to cause
cancer, or birth defects, or
other reproductive harm.

PROP 65 WARNING

Manufactured in China.

Batch Ref: XXXX

Model Number: XXXX

Conforms to safety requirements of ASTM, FCC, & CPSIA.

WARNING:

CHOKING HAZARD-Small parts.
Not for children under 3 years.

Tested to compl y with FCC standards .

FOR HOME OR O FFICE USE.

This devic e complies with pa rt 15 of the FCC

Rules. Op eration is subje ct to the followi ng two

conditions:

(1) This device may not ca use harmful

interference and

(2) This device m ust accept any inter ference

received, including interference that may cause

undesired operation.

BATTERY WARNING:

• Do no mix alkaline, standard (carbon zinc), rechargeable (nickel hydride) batteries.

• Do not mix old and new batteries.

• Non-rechargeable batteries should not be recharged.

• Rechargeable batteries should be removed from the appliance before being charged.

• Rechargeable batteries should be charged under adult supervision only.

• Exhausted batteries should be removed.

• The supply terminals should not be short-circuited.

• Only batteries of the same or equivalent type are recommended to be used.

• Batteries should be inserted with the correct polarity.

IMPORTANT INSTRUCTIONS

1. This product is precise equipment that integrates mechanics and electronics with expertise in aerodynamics and high-frequency
transmitting. It is required for the quadcopter to be correctly assembled and debugged to prevent an accident from occurring. The owner of
this product should control the quadcopter safely and carefully. Please keep in mind we are not responsible for this product being used
improperly. This may result in severe injury or loss of property and we cannot control the operating process once the user assembles or uses
this product.

2. This product is suitable for ages 14 years and up and people who have operating experience in flying a model.

3. Please fly quadcopter in open areas such as a local field and areas that allow remote control flying.

4. Once you are the owner of this product, you are responsible for your actions.

5. If there are any problems while using this product, such as operating or repairing, please reach our sales agent for details. The sales agent
will provide you with the technical support and after-sale service.

Headless Mode: Press the Headless Mode button and you will hear two beeps and enter Headless Mode. No matter what
direction the quadcopter faces, it will respond according to the direction pushed on the remote. (Forward on the remote
will make the quadcopter fly forward.) This makes flying simpler and more convenient for beginner pilots. To exit Headless
Mode, press the button and listen for a single beep to indicate you are back in Normal Mode.
One Key Return: As long as you are in controllable range, press the One Key Return button on the remote. You will hear a
single beep and the quadcopter will automatically return to the pilot. Press the button again or push the control lever to
exit One Key Return.

REMOTE CONTROLLER DIAGRAM

1. Use a screwdriver to remove screw on the back of
the transmitter, then open the battery cover (Figure 1)

2. Install 4 “AA” batteries (not included) into the back
of the transmitter then replace the battery cover and
reinstall the screw (Figure 2).

1. Install batteries with correct polarity.

2. Do not mix old and new batteries.

3. Do not mix different types of batteries.

Flip mode

Headless mode

Photo and video

One key return

Decorative

button

1. Sideways fine-tuning (Turn left/right fine-tuning in Mode 2)

2. Forward/backward fine-tuning

3. Turn left/right fine-tuning (Sideways fine-tuning in Mode 2)

4. Throttle power

5. Forward speed

6. Backwards speed

7. Right sideways speed

8. Left sideways speed

9. Left turning speed (The higher the level, the faster it will turn)

10. Right turning speed (The higher the level, the faster it will turn)

11. High/Low speed: Hold the “A” button to switch between high speed mode and low speed mode. “H” means high
speed and “L” means low speed.

12. Power indicator: Shows the remotes battery life

13. Mode indicator: Mode 1 is the default mode when powered on. To change to Mode 2, hold the “B” button, then
re-turn on the remote. The Mode on the LCD display will now be changed.

14. Signal power

Step 1: Switch the On/Off switch to ON. Step 2: Open the battery cover and insert

the battery into the power port.

Step 4: Push the throttle lever to the
highest position, then push it to its lowest.
There will be a beep from the remote,
indicating the quadcopter is in pre-flight
mode.

Step 3: Close the battery cover and turn on

the quadcopter.

Step 1: Push the On/Off switch of the

quadcopter to the OFF position and then

open the battery cover.

Step 2: Pull the battery wire out of the

power port.

Step 3: Insert the battery power port to the USB

charging cable. A light will turn on to indicate it

is charging.

GETTING READY TO FLY

CHARGING YOUR BATTERY

REMOTE CONTROL KEYPAD AND LCD SCREEN