QSC Audio SC-414 User Manual

Features

• Four-way selectable, tri or quad- amplified screen channel system

• Unique HF/VHF diaphragm has less mass than traditional diaphragms
resulting in exceptional dynamic range, extended high frequency response
and lower distortion

• LF-4115 is constructed of MDF and is heavily braced

• Low-distortion waveguides provide highly articulate dialogue

NEW!

SC-414

Cinema Loudspeaker System

• Shallow depth (20

™ approved for professional cinema applications

• THX

") facilitates installation

Developed specifically for the unique requirements
of professional motion picture playback, the SC-414
extends QSC’s commitment to the cinema market.
As a member of the DCS Digital Cinema Speaker
Series, the SC-414 is a four-way, selectable tri or
quad-amplified screen channel loudspeaker system
comprised of two main units — the MHV-1090 mid­high-very high-frequency system and the LF-4115
low-frequency system.

The MHV-1090 mid-high-very high system features
a high output, horn loaded 10" midrange cone
driver and a coaxial neodymium high-frequency/very
high-frequency compression driver. The MHV-1090
includes a driver protection network and a passive
crossover for tri-amp operation. The protection circuitry
prevents low-frequency signals from damaging the
high-frequency and very high-frequency driver. A
high power 10" cone driver allows operation as low
as 250 Hz and the advanced phase plug coupling
permits a crossover point of up to 1800 Hz to the
high-frequency horn. This ensures that most of the
dialog range is reproduced by a single element for
unmatched intelligibility.

The coaxial neodymium high-frequency/very high­frequency compression driver provides a dramatic
improvement in dynamic response, clarity and
transparency. The annular high-frequency diaphragm
covers the frequency range between 1800 and
7000 Hz with a smooth, linear response. The large
diaphragm excursion of +/-0.8 mm results in high
output and increased power handling. The very high­frequency driver covers the frequency range from
7,000 to 22,000 Hz and eliminates the dome break
up of conventional drivers that can cause resonance
and harsh, metallic sound.

The LF-4115 single 15" (381 mm) low-frequency
enclosure is designed specifically to address the
extended low-frequency response required for cinema
applications. The LF-4115 covers the frequency range
from 35 Hz to 250 Hz.

The SC-414 is designed for ease of installation. The
MHV-1090 components come pre-assembled to
reduce field assembly time. Three bolts are all that are
required to secure the MHV-1090 to the top of the
LF-4115 enclosure.

THX is a trademark of THX Ltd.

Specifications

Nominal Coverage 90° horizontal x +20 to -30° vertical

Frequency Range (-6 dB) 33 - 20 kHz

Active Crossover Frequencies 250, 1700 and 6000 Hz, 24 dB per octave

Impedance 4Ω MF: 8Ω HF: 8Ω VHF: 8Ω

Sensitivity 1 watt /1 meter,
half space

Maximum Input Power

8 hours of 6 db crest factor
IEC 268 noise spectrum

2 hours of 6 db crest factor
pink noise, 50 Hz - 20 kHz,
AES method

Recommended
Amplifier Power

Recommended Processing Subsonic filter below 30 Hz,

Connectors Barrier strip screw terminals accept up to #10 AWG stranded wire

Transducers One 15" (381mm) high

Enclosure Quasi B4 alignment, ported

Dimensions (HWD) 18.5" x 30" x 20.3"

Weight - Net 83 lbs (38 kg) 84 lbs (38.5 kg)

System Weight 167 lbs (76.5 kg)

Baffle Cut-Out 58.75" x 32"

1) Maximum input power tested in accordance with IEC 268-5 recommendations, 50 Hz - 20 kHz band limiting, 6 dB signal crest factor.

1

SC-414

LF-4115 MH-1090

93.5 dB Tri-amp

400 W RMS MF: 275 W RMS

500 W RMS MF: 800 W RMS

800 W RMS maximum MF: 800 W RMS

>18 dB per octave

efficiency, extended bass
woofer featuring a 4" copper
voice coil

enclosure with fully flared
ports, symmetrical port design,
tuned to 36 Hz, constructed
of MDF and heavily braced.
Features vandal resistant
woofer mounting bolts

(470 mm x 762 mm x 516 mm)

MF:105 dB
HF/VHF: 110 dB

HF/VHF: 230 W RMS

HF/VHF: 500 W RMS maximum

HF: 500 W RMS
VHF: 300 W RMS maximum

4th order LR crossover at 250, 1700 and
6000 Hz via QSC DCM or QSControl.net

MF: 10" high-effeciency, horn-loaded
cone with pahse plug
HF/VHF: coaxial neodymium compression
driver with 3.5" (90 mm) HF diaphram
and 1.75" (44 mm) VHF diaphram

Tilt/Pan Bracket
±10° vertical tilt
±10° horizontal pan

39" x 30" x 20"
(990 mm x 762 mm x 508 mm)

Quad-amp
MF: 105 dB
HF: 110 dB
VHF: 110 dB

MF: 275 W RMS
HF: 150 W RMS
VHF: 80 W RMS

SC-414

Top

21.7"

551 mm

30"

762 mm

Dimensions

20.3"

516 mm

Front

Side

4"

102 mm

10.45"

265 mm

39"

990 mm

57.5"

1460 mm

18.5"

910 mm

Specifications subject to change without notice.

1675 MacArthur Boulevard • Costa Mesa, CA 92626 • Ph: 800/854-4079 or 714/957-7100 • Fax: [phone]

SC-414 Spec Sheet - 0 4/23/07

qscaudio.com