QNAP TS-453BT3-8G User Manual

0 (0)
QNAP TS-453BT3-8G User Manual

Hardware Specification

TS-453BT3-8G

CPU

System Memory

Maximum Memory

Memory Slot

Drive Bay

Drive Compatibility

M.2 SSD Slot

SSD Cache Acceleration Support

Hot-swappable

10 Gigabit Ethernet Port

Gigabit Ethernet Port

PCIe Slot

Thunderbolt Port

USB Port

HDMI Output

Audio

Display Panel

USB One Touch Copy

IR sensor

Form Factor

Processor: Intel® Celeron® J3455 quad-core 1.5 GHz, burst up to 2.3 GHz

Architecture: 64-bit

Graphics: Intel® HD Graphics 500 Encryption Engine: AES-NI

8 GB RAM (2 x 4 GB DDR3L)

8 GB (2 x 4 GB)

2 x SODIMM DDR3L

4 x SATA 6 Gbps

3.5-inch SATA hard disk drives

2.5-inch SATA hard disk drives

2.5-inch SATA solid state drives

2 x M.2 2280 SATA 6 Gbp/s SSD

Drive bays 1 to 4

M.2 slots 1 to 2

Optional: SSD using PCIe expansion slot

Yes

The following are not hot-swappable: M.2 SSDs, SSD cache drives, SSDs using PCIe expansion slots.

1 x 10GBASE-T RJ-45

2 x RJ45

1 x PCIe 2.0 x2

Note: Pre-installed with a QM2 expansion card that includes a 10GbE SFP+ port and two M.2 SSD slots).

2 x Thunderbolt 3

5 x USB 3.0 (Front: 1 x One Touch Copy; Back: 4)

2 x HDMI 1.4b (up to 3840 x 2160 resolution at 30 Hz)

2 x 3.5 mm dynamic microphone jacks

1 x 3.5 mm line-out jack

1 x speaker

Note: You cannot use the speakers and the line-out jack simultaneously.

Monochrome OLED display with capacitive sensing Enter and Select buttons

Front: USB 3.0 Type-A

QNAP RM-IR004 remote control (MCE compatible)

Tower

Loading...
+ 1 hidden pages