TS-431KX
TS-431KX
TS-431X3
User Guide
Document Version: 2 22/05/2020
TS-431KX/TS-431X3 User Guide
Contents |
|
1. Preface |
|
About This Guide.......................................................................................................................................... |
3 |
Audience....................................................................................................................................................... |
3 |
Document Conventions................................................................................................................................ |
3 |
2. Product Overview |
|
About the TS-431KX..................................................................................................................................... |
4 |
About the TS-431X3..................................................................................................................................... |
4 |
Hardware Specifications............................................................................................................................... |
4 |
Components................................................................................................................................................. |
6 |
Front Panel............................................................................................................................................... |
6 |
Rear Panel................................................................................................................................................ |
7 |
System Board........................................................................................................................................... |
9 |
Drive Numbering....................................................................................................................................... |
9 |
Package Contents........................................................................................................................................ |
9 |
Safety Information....................................................................................................................................... |
10 |
Installation Requirements............................................................................................................................ |
11 |
Setting Up the NAS..................................................................................................................................... |
11 |
3. Installation and Configuration |
|
Hardware Installation.................................................................................................................................. |
13 |
Drive Installation..................................................................................................................................... |
13 |
Replacing Memory Modules................................................................................................................... |
20 |
Connecting USB Expansion Units.............................................................................................................. |
30 |
QTS Installation.......................................................................................................................................... |
32 |
Installing QTS Using Qfinder Pro........................................................................................................... |
32 |
Installing QTS Using the Cloud Key....................................................................................................... |
33 |
4. Basic Operations |
|
Power Button.............................................................................................................................................. |
36 |
Reset Button............................................................................................................................................... |
36 |
LEDs........................................................................................................................................................... |
37 |
USB One Touch Copy Button..................................................................................................................... |
39 |
Audio Alert.................................................................................................................................................. |
39 |
5. Troubleshooting |
|
Hot-swapping Failed Drives........................................................................................................................ |
40 |
Forcing Qfinder Pro or myQNAPcloud to Locate the NAS......................................................................... |
40 |
Recovering Unintentionally Removed Healthy Drives................................................................................ |
41 |
Support and Other Resources.................................................................................................................... |
41 |
6. Glossary |
|
Cloud Key................................................................................................................................................... |
42 |
myQNAPcloud Link..................................................................................................................................... |
42 |
myQNAPcloud............................................................................................................................................ |
42 |
myQNAPcloud ID........................................................................................................................................ |
42 |
Qfinder Pro................................................................................................................................................. |
42 |
QTS............................................................................................................................................................. |
42 |
7. Notices |
|
1
Limited Warranty......................................................................................................................................... |
43 |
Disclaimer................................................................................................................................................... |
43 |
GNU Public License.................................................................................................................................... |
43 |
CE Notice.................................................................................................................................................... |
51 |
FCC Notice................................................................................................................................................. |
51 |
VCCI Notice................................................................................................................................................ |
52 |
BSMI Notice................................................................................................................................................ |
52 |
SJ/T 11364-2006......................................................................................................................................... |
52 |
2
TS-431KX/TS-431X3 User Guide
This guide provides information on the QNAP TS-431KX and TS-431X3 NAS and step-by-step instructions on installing the hardware. It also provides instructions on basic operations and troubleshooting information.
This document is intended for consumers and storage administrators. This guide assumes that the user has a basic understanding of storage and backup concepts.
Symbol |
Description |
|
Notes provide default configuration settings and other supplementary |
|
information. |
|
|
|
Important notes provide information on required configuration settings and other |
|
critical information. |
|
|
|
Tips provide recommendations or alternative methods of performing tasks or |
|
configuring settings. |
|
|
|
Warnings provide information that, when ignored, may result in potential loss, |
|
injury, or even death. |
|
|
Preface 3
TS-431KX/TS-431X3 User Guide
This chapter provides basic information about the QNAP TS-431KX and TS-431X3 NAS.
The TS-431KX is powered by Annpurna Labs Alpine AL-214 1.7 GHz processors for multi-tasking and smooth data streaming. Built to accommodate busy office environments, the TS-431KX ensures data security and performance with built-in AES 256-bit encryption engines. It features a USB One Touch Copy port for quick and convenient backup and data transfer. The TS-431KX supports 4-drive bays and SATA 6 Gbps for speedy data transfer. The NAS also offers one 10 Gigabit Ethernet SFP+ interface and dual Gigabit Ethernet RJ45 ports for quick data transfer.
The TS-431X3 is powered by Annapurna Labs Alpine AL-314 quad-core 1.7 GHz processors for highperforming data processing, and cost-effective storage in business environments. Built for SMB office environments, the TS-431X3 ensures data security and performance with built-in encryption engine. It features a USB One Touch Copy port for quick and convenient backup and data transfer. The TS-431X3 supports 4-drive bays and SATA 6 Gbps for speedy data transfer. The NAS also offers three types of Gigabit Ethernet ports, including 10 Gigabit Ethernet SFP+, 2.5 Gigabit Ethernet RJ45, and Gigabit Ethernet RJ45 for quick data transfer.
Warning
If your QNAP product has hardware defects, return the product to QNAP or a QNAPauthorized service center for maintenance or replacement. Any attempt to repair or perform maintenance procedures on the product by you or an unauthorized third-party invalidates the warranty.
QNAP is not responsible for any damage or data loss caused by unauthorized modifications and installation of unsupported third-party applications.
For details, see the QNAP Warranty Terms and Conditions.
Tip
Model specifications are subject to change without prior notice. To see the latest specifications, go to https://www.qnap.com.
Ordering P/N |
CPU |
Memory |
Power supply |
TS-431KX-2G |
Annapurna Labs Alpine |
2 GB |
Single |
|
AL-214 |
|
|
|
|
|
|
TS-431X3-4G |
Annapurna Labs Alpine |
4 GB |
Single |
|
AL-314 |
|
|
Component |
TS-431KX-2G |
TS-431X3-4G |
Processor |
|
|
|
|
|
CPU |
Annapurna Labs Alpine AL-214 |
Annapurna Labs Alpine AL-314 |
|
|
|
Frequency |
4-core/1.7 GHz |
4-core/1.7 GHz |
|
|
|
Architecture |
ARM 32-bit |
|
|
|
|
Encryption engine |
AES-256 |
|
|
|
|
Memory |
|
|
|
|
|
Product Overview 4
TS-431KX/TS-431X3 User Guide
Component |
|
|
|
TS-431KX-2G |
|
TS-431X3-4G |
Pre-installed memory |
2GB RAM: 1 x 2 GB SODIMM |
|
4 GB RAM: 1 x 4 GB SODIMM |
|||
|
DDR3L |
|
|
DDR3L |
||
|
|
|
|
|||
Memory slots |
1 x SODIMM DDR3L |
|
||||
|
|
|
|
|
|
|
|
|
|
Important |
|
||
|
|
|
|
|||
|
|
|
• |
Use only QNAP memory modules to maintain |
||
|
|
|
|
system performance and stability. For NAS devices |
||
|
|
|
|
with more than one memory slot, use QNAP |
||
|
|
|
|
modules with identical specifications. |
||
|
|
|
• |
Using unsupported modules may degrade |
||
|
|
|
|
performance, cause errors, or prevent the |
||
|
|
|
|
operating system from starting. |
||
|
|
|
||||
Maximum memory |
8GB RAM: 1 x 8 GB |
|
||||
|
|
|
||||
Flash memory |
512 MB (dual-boot OS protection) |
|
||||
|
|
|
|
|
|
|
Storage |
|
|
|
|
|
|
|
|
|
||||
Drive bays |
4 x 3.5-inch SATA 6 Gbps |
|
||||
|
|
|
|
|
|
|
|
|
|
Note |
|
||
|
|
|
|
|||
|
|
|
The SATA 6 Gbps drive bays are backward compatible |
|||
|
|
|
with SATA 3 Gbps drives. |
|
||
|
|
|
||||
Drive compatibility |
3.5-inch bays: |
|
||||
|
• |
3.5-inch SATA hard disk drives |
|
|||
|
• |
2.5-inch SATA hard disk drives |
|
|||
|
• |
2.5-inch SATA solid-state drives |
|
|||
|
|
|
||||
SSD cache acceleration support |
3.5-inch drive bays:1 to 4 |
|
||||
|
|
|
||||
Hot-swapping |
Supported |
|
||||
|
|
|
|
|
|
|
Network |
|
|
|
|
|
|
|
|
|
||||
10 Gigabit Ethernet ports |
1 x 10 GbE SFP+ |
|
||||
|
|
|
|
|
||
2.5 Gigabit Ethernet port |
None |
|
|
1 x 2.5 GbE RJ45 |
||
|
|
|
|
|||
Gigabit Ethernet ports |
2 x GbE RJ45 |
|
1 x GbE RJ45 |
|||
|
|
|
|
|||
Wake-on-LAN |
Yes (GbE RJ45) |
|
||||
|
|
|
|
|
|
|
External I/O Ports & Expansion Slots |
|
|
|
|
|
|
|
|
|
||||
USB ports |
Front panel: |
|
||||
|
• |
1 x USB 3.2 Gen 1 port (5Gbps) Type-A |
||||
|
|
|
Note |
|
||
|
|
|
|
|||
|
|
|
This USB port supports One Touch Copy. |
|||
|
|
|
|
|
||
|
Rear panel: |
|
||||
|
• |
2 x USB 3.2 Gen 1 ports (5Gbps) Type-A |
||||
|
|
|
|
|
|
|
Interface |
|
|
|
|
|
|
|
|
|
|
|
|
|
Product Overview 5
TS-431KX/TS-431X3 User Guide
Component |
|
|
TS-431KX-2G |
|
TS-431X3-4G |
Buttons |
• |
Power |
|
||
|
• |
Reset |
|
||
|
• USB One Touch Copy |
|
|||
|
|
|
|
|
|
Dimensions |
|
|
|
|
|
|
|
|
|||
Form factor |
Tower |
|
|||
|
|
|
|||
Dimensions (H x W x D) |
169 x 160 x 219 mm |
|
|||
|
(6.65 x 6.3 x 8.62 in) |
|
|||
|
|
|
|||
Net weight |
3 kg (6.61 lbs) |
|
|||
|
|
|
|
|
|
Others |
|
|
|
|
|
|
|
|
|||
Power supply unit |
90W, 100-240V AC, 50/60 Hz |
|
|||
|
|
|
|||
System battery |
CR2032 lithium battery (3V, 225 mAh) |
|
|||
|
|
|
|||
Sound level |
19.5 dB(A) |
|
|||
|
|
|
Note |
|
|
|
|
|
|
||
|
|
|
The sound level was tested at a bystander position, |
||
|
|
|
which is within one meter of the NAS. The test NAS |
||
|
|
|
operated at low speed with the maximum number of |
||
|
|
|
drives installed. |
|
|
|
|
|
|||
Fans |
System fan: 1 x 120mm, 12V DC smart fan |
|
|||
|
|
|
|||
Operating temperature |
0˚C to 40˚C (32˚F to 104˚F) |
|
|||
|
|
|
|||
Relative humidity |
• |
Non-condensing relative humidity: 5% to 95% |
|||
|
• |
Wet-bulb temperature: 27˚C (80.6˚F) |
|
||
|
|
|
|||
Security slot |
Kensington security slot |
|
|||
|
|
|
|
|
|
Product Overview 6
TS-431KX/TS-431X3 User Guide
No. |
|
Component |
No. |
Component |
1 |
Status LED |
|
6 |
Drive 3 LED |
|
|
|
|
|
2 |
LAN LED |
|
7 |
Drive 4 LED |
|
|
|
|
|
3 |
USB LED |
|
8 |
Power button |
|
|
|
|
|
4 |
Drive 1 LED |
|
9 |
USB One Touch Copy button |
|
|
|
|
|
5 |
Drive 2 LED |
|
10 |
USB 3.2 Gen 1 One Touch Copy Type-A port |
|
|
|
|
|
TS-431KX
No. |
|
Component |
No. |
|
Component |
1 |
Reset button |
6 |
USB 3.2 Gen 1 (5Gbps) Type-A ports |
||
|
|
|
|
|
|
2 |
10 |
Gigabit Ethernet activity LED |
7 |
Power input |
|
|
|
|
|
|
|
3 |
10 |
Gigabit Ethernet port (SFP+) |
8 |
Kensington security slot |
|
|
|
|
|
|
|
4 |
10 |
Gigabit Ethernet link LED |
9 |
Gigabit Ethernet ports (RJ45) |
|
|
|
|
|
|
Note |
|
|
|
|
|
|
|
|
|
|
|
Only these ports support Wake- |
|
|
|
|
|
on-LAN configurations. |
|
|
|
|
||
5 |
Gigabit Ethernet activity LEDs |
10 |
Gigabit Ethernet speed LEDs |
||
|
|
|
|
|
|
Product Overview 7
TS-431KX/TS-431X3 User Guide
TS-431X3
No. |
|
|
Component |
No. |
Component |
1 |
Reset button |
8 |
Power input |
||
|
|
|
|
|
|
2 |
10 |
Gigabit Ethernet activity LED |
9 |
Kensington security slot |
|
|
|
|
|
|
|
3 |
10 |
Gigabit Ethernet port (SFP+) |
10 |
Gigabit Ethernet activity LED |
|
|
|
|
|
|
|
4 |
10 |
Gigabit Ethernet link LED |
11 |
Gigabit Ethernet speed LED |
|
|
|
|
|
||
5 |
2.5 Gigabit Ethernet port (RJ45) |
12 |
2.5 Gigabit Ethernet activity LED |
||
|
|
|
|
||
6 |
Gigabit Ethernet port (RJ45) |
13 |
2.5 Gigabit Ethernet speed LED |
||
|
|
|
Note |
|
|
|
|
|
|
|
|
|
|
|
Only this port supports Wake-on- |
|
|
|
|
|
LAN configuration. |
|
|
|
|
|
|
||
7 |
USB 3.2 Gen 1 (5Gbps) Type-A ports |
- |
- |
||
|
|
|
|
|
|
Product Overview 8
TS-431KX/TS-431X3 User Guide
No. |
|
Component |
No. |
Component |
1 |
Memory slot |
|
- |
- |
|
|
|
|
|
Item |
Quantity |
TS-431KX or TS-431X3 |
1 |
|
|
AC power adapter |
1 |
|
|
Product Overview 9
TS-431KX/TS-431X3 User Guide
Item |
Quantity |
Power cord |
1 |
|
|
Ethernet cable |
TS-431KX: 2 x Cat5e |
|
TS-431X3: 1 x Cat5e |
Screws for 3.5-inch drives |
16 |
|
|
Screws for 2.5-inch drives |
12 |
|
|
Quick Installation Guide (QIG) |
1 |
|
|
The following instructions help ensure personal safety and environmental safety. Read these instructions carefully before performing any operations.
General Instructions
•The NAS should be stored in a secure location with restricted access, controlled through the use of a tool, lock and key, or any means of security.
•Only qualified, skilled, and authorized persons with knowledge of all restrictions, safety precautions, and installation and maintenance procedures should have physical access to the NAS.
•To avoid potential injury or damage to components, ensure that the drives and other internal system components have cooled before touching them.
•Observe electrostatic discharge (ESD) procedures to avoid potential injury or damage to components.
Power
•To reduce the risk of fire or electric shock, ensure that you only connect the power cord to a properly grounded electrical outlet.
•
Devices with redundant power supply may have one or more power supply unit (PSU) cords. To avoid serious injuries, a trained service technician must disconnect all PSU cords from the device before installing or replacing system components.
System Battery
•To avoid potential battery explosion, causing injury or damage to components, ensure that you replace the existing battery with a battery of the same type.
•Dispose of used batteries properly according to local regulations or the instructions of the battery manufacturer.
Moving Parts
•
Moving fan blades: Keep your body parts away from moving fan blades while the device is connected to a power source.
Product Overview 10
TS-431KX/TS-431X3 User Guide
•
Moving components: Keep your body parts away from other moving components.
Category |
|
Item |
Environment |
• |
Room temperature: 0˚C to 40˚C (32˚F to 104˚F) |
|
• |
Non-condensing relative humidity: 5% to 95% |
|
• |
Wet-bulb temperature: 27˚C (80.6˚F) |
|
• |
Flat, anti-static surface without exposure to direct sunlight, liquids, |
|
|
or chemicals |
|
• |
Free from objects that may obstruct NAS ventilation or apply |
|
|
pressure to the NAS or power cord |
|
|
|
Hardware and peripherals |
• |
Storage drives |
|
• |
For the list of compatible drive models, go to https:// |
|
|
www.qnap.com/compatibility. |
|
• |
Network cable |
|
|
|
Tools |
• |
Phillips #1 or #2 screwdriver |
|
• |
Flat head screwdriver |
|
• |
Anti-static wrist strap |
|
|
|
Important
Read all safety requirements and information in Safety Information carefully before setting up the NAS or installing NAS components.
1.Place your NAS device in an environment that meets the requirements.
2.Install the drives.
For details, see the following topics:
•Installing 3.5-inch Hard Drives on 3.5-inch Trays
•Installing 2.5-inch Hard Drives or Solid-State Drives on 3.5-inch Trays
For the list of compatible drive models, go to https://www.qnap.com/compatability.
3.Connect the NAS to the network.
4.Connect the USB expansion units.
For details, see Connecting USB Expansion Units.
5.Connect the power cord and all applicable cables.
6.Power on the NAS.
Product Overview 11
TS-431KX/TS-431X3 User Guide
For details, see Front Panel.
7.Install QTS.
For details, see QTS Installation.
Product Overview 12
TS-431KX/TS-431X3 User Guide
This chapter provides specific hardware and firmware installation and configuration steps.
This section provides information on installing drives, memory modules, and expansion cards.
The TS-431KX and the TS-431X3 are compatible with 3.5-inch hard drives, 2.5-inch hard drives, and 2.5- inch solid-state drives.
Warning
•Installing a drive deletes all data on the drive.
•Observe electrostatic discharge (ESD) procedures to avoid damage to components.
Moving fan blades: Keep your hands and other body parts away from moving fan blades.
•
Other moving components: Keep your hands and other body parts away from other moving components.
1.Power off the NAS.
2.Remove the drive tray.
a. Optional: Unlock the tray.
Installation and Configuration 13
TS-431KX/TS-431X3 User Guide
Note
The preinstalled drive trays come unlocked.
Important
Ensure the drive tray keys are stored in a safe place.
b.Pull the handle to release the tray.
c.Pull the tray out.
3.Install a drive on the tray.
a. Remove the fastening panels from the sides of the drive tray.
Installation and Configuration 14
TS-431KX/TS-431X3 User Guide
b.Place the drive on the tray so that the holes on the sides of the drive are aligned with the holes on the sides of the tray.
c.Attach the fastening panels.
d. Optional: Attach the screws to further secure the drive.
Installation and Configuration 15
TS-431KX/TS-431X3 User Guide
4.Load the tray into the bay.
a.Insert the tray into the bay.
b.Push the handle.
c. Lock the tray.
Installation and Configuration 16