QNAP TS-1232XU-4G User Manual

Hardware Specification

TS-1232XU-4G

CPU Annapurna Labs Alpine AL-324 ARMv8 Cortex-A57 quad-core 1.7

GHz processor

Architecture: 64-bit

Encryption Engine: Yes

System Memory 4 GB DDR4 (1 x 4GB)

Maximum Memory 16 GB (1 x 16 GB)

Memory Slot 1 x DDR4 Long-DIMM slot

Drive Bay 12 x 3.5-inch SATA 6 Gbps bays

Drive Compatibility 3.5-inch SATA hard disk drives

2.5-inch SATA hard disk drives

2.5-inch SATA solid state drives

SSD Cache Acceleration Support 3.5-inch bays 1 to 12

Optional: SSDs on an optional QM2 PCIe expansion card

10 Gigabit Ethernet Port 2 x 10GbE SFP+

Gigabit Ethernet Port 2 x RJ45

USB Port 4 x USB 3.1 Gen 1 Type-A

PCIe Slot Slot 1: 2.0 x2

Form Factor Rackmount

Dimensions (H x W x D) 89 x 482 x 534 mm

3.5 x 18.98 x 21.02 inch

Net Weight 11.3 kg (24.91 lbs)

Power Supply Unit ATX 250 W, 100 - 240 V AC, 50/60 Hz, 3.5A

Power Consumption (W) HDD sleep: 30.63 W

In Operation: 67.56 W

Fan 2 x 7 cm fans (12 V DC)

Sound Level 24.5 dB(A)

Operating Temperature & Relative

Humidity

Note: Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one

0 ~ 40˚C ( 32˚F ~ 104˚F ), 5 ~ 95% RH non-condensing, wet bulb

temp.: 27˚C (80.6˚F)

memory slot, use QNAP modules with identical specifications. Warning: Using unsupported modules may degrade

performance, cause errors, or prevent the operating system from starting.

* Sound Level Test Environment: Refer to ISO 7779; Maximum HDD loaded; Bystander Position; Average data from 1 meter in

front of operating NAS.

Designs and specifications are subject to change without notice.