QNAP TL-R1200C-RP User Manual

Hardware Specification
TL-R1200C-RP
Audio Alert On/Off Switch Yes
Form Factor 2U Rackmount
Host Interface 1 x USB 3.2 Gen 2 Type-C
LED Indicators HDD 1-12, Status, Link, Fan error
Buttons Power switch
Weight (Net) 11.03 kg
Weight (Gross) 14.29 kg
Max. number of HDDs/SSDs supported
12 x 3.5-inch SATA 6Gb/s
Hard Drive Type 3.5-inch SATA hard disk drives
2.5-inch SATA hard disk drives
2.5-inch SATA solid state drives
Operating temperature 0 - 40 °C (32°F - 104°F)
Relative Humidity 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)
Power Supply Unit 250W PSU, 100 - 240V
Power Consumption: Operating Mode, Typical
82.26 W
Fan Mode Switch Yes (Auto, high, medium, low)
Fan 2 x 70mm, 12VDC
Sound Level 33.4 db(A)
System Warning Buzzer
Note: Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one memory slot, use QNAP modules with identical specifications. Warning: Using unsupported modules may degrade performance, cause errors, or prevent the operating system from starting. * Sound Level Test Environment: Refer to ISO 7779; Maximum HDD loaded; Bystander Position; Average data from 1 meter in front of operating NAS.
Designs and specifications are subject to change without notice.
Loading...