QNAP TDS-16489U-SE1-R2 User Manual

Hardware Specification
TDS-16489U-SE1-R2
CPU E5-2620 v4 8-core 2.1 GHz processor x2
CPU Architecture 64-bit x86
Floating Point Unit Yes
Encryption Engine Yes (AES-NI)
System Memory 64GB RDIMM DDR4 (8 x 8GB)
Memory Slot 16 x Long-DIMM DDR4
Flash Memory 4GB (DOM for dual OS)
Drive Bay Front: 16 x 3.5-inch
Rear: 4 x 2.5-inch
Drive Compatibility 3.5-inch bays:
3.5-inch SATA/SAS hard disk drives
2.5-inch SATA/SAS hard disk drives
2.5-inch SATA/SAS solid state drives
2.5-inch bays:
2.5-inch SATA/SAS solid state drives
Hot-swappable Yes
SSD Cache Acceleration Support
Yes
Gigabit Ethernet Port (RJ45)
2
10 Gigabit Ethernet Port 4 x 10GbE SFP+
Jumbo Frame Yes
PCIe Slot 4
Slot 1: PCIe Gen 3 x16 Slot 2: PCIe Gen 3 x8 Slot 3: PCIe Gen 3 x8 Slot 4: PCIe Gen 3 x8
USB 3.2 Gen 1 port 4
IPMI 3 (LAN, VGA, console)
*Only work with QTS OS
Form Factor 3U Rackmount
LED Indicators HDD 1-16, Status, 10 GbE, LAN, storage expansion port status
Buttons Power, Reset
Dimensions (HxWxD) 130.8 × 444 × 744 mm
Weight (Net) 22.42 kg
Weight (Gross) 30.19 kg
Operating temperature 0 - 40 °C (32°F - 104°F)
Relative Humidity 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)
Power Supply Unit Redundant/ Hot Swap ATX Power Supply,Input:
50-60 Hz 100-127V~/ 10A 200-240V/ 5A Output: 770W
Power Consumption: HDD Sleep Mode
254.21 W
Power Consumption: Operating Mode, Typical
362.86 W
Fan 4 x 60mm, 12VDC
Sound Level 37.8 db(A)
System Warning Buzzer
Max. Number of Concurrent Connections (CIFS)
QTS: 1500 QES: 1500
Note: Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one memory slot, use QNAP modules with identical specifications. Warning: Using unsupported modules may degrade performance, cause errors, or prevent the operating system from starting. * Sound Level Test Environment: Refer to ISO 7779; Maximum HDD loaded; Bystander Position; Average data from 1 meter in front of operating NAS. Designs and specifications are subject to change without notice.
Loading...