QNAP QXP-W6-AX200 User Manual

A new milestone with Gigabit+ level of WiFi 6 connectivity

The increasing trend of wireless-only
environment
Gigabit+ level WiFi 6 wireless
connectivity
QXP-W6-AX200 PCIe WiFi 6 card
enables NAS and PC with high-speed WiFi 6 client connectivity
How to install and setup QXP-W6-
AX200 on PC and NAS

More WiFi only environments because of the simplicity of wireless connections

Laptops and mobile devices already have integrated wireless capability
Because all mobile devices now are equipped with Wi-Fi, hotel rooms and lobbies, show rooms, and conference centers no longer provide wired connection or provide it with a fee. More and more locations now provide WiFi-only connection.

More and more laptops have removed RJ45 LAN port

Apple Macs Chromebook
Windows computers

Next-gen WiFi 6 network with Gigabit+ speed

WiFi 6
2x2 802.11ax
WiFi 5 2x2 802.11ac wave2
WiFi 5 2x2 802.11ac
WiFi 4 1x1 802.11bgn
QXP-W6-AX200

WiFi 6 is faster and lower in latency than WiFi 5

11ax
1024-QAM
11ac
256-QAM
1.25 X
Faster Speed
10bits/symbol
8bits/symbol
1.25x
improvement
4 X
Lower Latency
802.11ax l OFDMA
Transmitted data
Client1
Client2
Client3
Source: https://www.tp-link.com/bg/wifi6/

WiFi 6 with larger coverage, less interference, and higher capacity for more devices

8 x 8 MU-MIMO supports concurrent upload and download for more connected devices.
BSS (Basic Service Set) coloring can mark surrounding non-related wireless
125 %
More coverage
Fewer dead corners
More connections
devices and ignore them and also avoid weak wireless signals to reduce the wireless interference for better wireless connection quality.
OFDMA (Orthogonal Frequency­Division Multiple Access) can divide each channel into small ones with narrower bands for higher wireless coverage thus reducing the number of wireless-dead zones.

More devices are now shipped with WiFi 6

Laptops
Asus Chromebook Flip c436
Dell XPS 13 (2020)
HP Spectre x360
Lenovo Yoga c940
LG Gram 17
Microsoft Surface pro 7
PCs / Motherboards
Asus Mini PC PN62
Asus desktop PC S700TA
Acer Predator Helios 300
AMD B550 boards
Intel Z490 boards
Phones / iPad Pro
Huawei P40 Pro
iPhone 11 series, SE
LG V60 ThinQ
Motorola Edge Plus
OnePlus 8 and 8 Pro
Samsung Galaxy S10, S20 series
Samsung Galaxy Note 10 series
Samsung Galaxy Fold
Xiaomi Mi 10 series

QXP-W6-AX200 enables your current PC and NAS with WiFi 6 wireless connectivity

Current Windows 10 /Linux PCs
QNAP TS-253D NAS
PC / NAS installs the QXP-W6-AX200 PCIe WiFi 6 card
WiFi6 router / access point

QXP-W6-AX200 WiFi 6 card package contents

WiFi 6 PCIe
Card and antenna
2 extra half-height
brackets for PC and NAS
Internal USB cable for
Bluetooth 5.0 on PC
Installation guide
Windows 10
driver CD

QXP-W6-AX200 WiFi 6 card overview

Bluetooth 5.0 USB connector for PC connection
(Choose from USB 2.0 Type-A and pin header)
Pre-installed full­height bracket
Gold-plated connectors for higher quality and durability
Intel WiFi 6 AX200 wireless module
Theoretical speed up to 2400Mbps
802.11 ax/ac/a/b/g/n
Bluetooth 5.0 for PC
AORUS high-performance dual-band antenna with 802.11ax 2.4GHz & 5GHz
2T x 2R antenna with smart antenna enhancement for the optimal wireless performance
Antenna with multiple angle tilt and magnetic base for the best placement and signal reception
PCIe 2.0 x1 interface

Supports NAS QTS / QuTS hero, Windows 10, and Linux operating systems

QXP-W6-AX200
QTS 4.4.3 + & QuTS hero
NAS with a PCIe slot* and
Install the driver from Intel AX200 website
Supports Windows 10 64 bit / Linux kernel 5.1+
64-bit x86 and ARM CPU
*Refer to the QNAP website for the compatible NAS models. Some NAS models require a BIOS update.

2x2 WiFi 6 and 160MHz for 3X data rates and 4X capacity

QXP-W6-AX200 WiFi 6 (802.11ax) card provides nearly 3X higher peak data rates and 4X capacity improvements with spatial reuse than a WiFi 5 (802.11ac) card in dense environments*.
2x2 160MHz channels, Upload/Download OFDMA, 1024QAM, and MU-MIMO deliver theoretical data rates in 2.4GHz up to 574Mbps, and in 5GHz up to 2402Mbps.
Source: https://www.intel.com/content/www/us/en/products/docs/wireless-products/gaming-with-wi-fi-6-infographic.html *A WiFi 6 router is required to achieve the WiFi 6 performance and benefits. Actual wireless throughput and/or range will vary depending on your environments.

Add Bluetooth 5.0 to PC with faster and longer BT range

Use the included USB cable or an optional USB Type-A cable for the PC motherboard connection*
Bluetooth 5.0 provides 2X the data transfer speed and 4X the range compared to Bluetooth 4.x
*NAS does not support the Bluetooth usage.
QXP-W6-AX200

How to connect the USB cable in PC for Bluetooth 5.0

Step 1: Connect the included USB cable to the black connector on the rear end of the QXP-W6-AX200 card.
Step 2: Connect the other end of the USB cable to the F_USB connector on the PC motherboard.
QXP-W6-AX200
Two methods for setting up WiFi NAS

You can make your NAS wireless by installing PCIe AX200 or USB WiFi Dongles.

QNAP QXP-W6-AX200 PCIe supports
WiFi 6 (802.11ax)
USB Dongle only supports up to
WiFi 5 (802.11ac)

USB WiFi Dongle Caompatibility List

Go to QNAP website for USB WiFi Dongle Compatibility List
https://www.qnap.com/go/compatibility
可於 QNAP 官網查詢

Transform your NAS to become WiFi 6 NAS

WiFi 6 AP
Direct cable
connection
High speed
wireless internet
Hotel
Library
Factory
Customer Office
Pure wireless office

ow to quickly setup QXP-W6-AX200

The QXP-W6-AX200 card can be activated on NAS using following two ways
Enable WiFi at [Network and Virtual Switch]
Log into Captive Portal via Browser Station
***Browser Station only supports on x86-based NAS with a minimum 4GB memory or above. ***Browser Station needs to be installed manually.
Enable WiFi via Qfinder Pro
Log into Captive Portal via host browser
Qfinder Pro Version
Windows v6.9.2 Mac v7.3.2 Linux v7.3.2
***If the connected WiFi AP has a mechanism that blocks request under NAT, the browser cannot be opened automatically. You need to enable Browser Station on the NAS to log into Captive Portal, or select another WiFi network that does not need to log into Captive Portal.

Network and Virtual Switch x Browser Station

Step 1
Install QXP-W6-AX200
on NAS PCIe slot.

Network and Virtual Switch x Browser Station

Step 2
Turn on NAS. Connect
PC and NAS directly using ethernet cable and log into QTS.
You can see system
notification shows that PCIe WiFi 6 AX200 has been detected.
QTS FW needs to be
4.4.3 or above.

Network and Virtual Switch x Browser Station

Step 3
Go to Network and
Virtual Switch page
Go to WiFi6 AX200
Setting.

Network and Virtual Switch x Browser Station

Step 4
Enable WiFi and
select a SSID to connect.
Enter WiFi password

Network and Virtual Switch x Browser Station

Step 5
If log into Captive Portal is required, click the link under SSID, and a new browser tab will open
automatically via Brower Station.
WiFi connection will complete after logging in.
***Browser Station only supports on x86-based NAS with a minium 4GB memory or above.

Setting up QXP-W6-AX200 via Qfinder Pro

Step 1
Install AX200 on NAS PCIe
slot. Turn on NAS. Connect PC to NAS directly using ethernet cable.
Find NAS via Qfinder Pro
NAS Status will show
a Wireless Icon indicating that AX200 is detected.
Setting up QXP-W6-AX200 via Qfinder Pro
Step 2
Click Wireless icon
Log into NAS and enable WiFi settings

Setting up QXP-W6-AX200 via Qfinder Pro

Step 3
Select SSID and connect
Setting up QXP-W6-AX200 via Qfinder Pro
Step 4
Click login after wireless connection completes. Captive portal page will be opened via host browser automatically.
***If the connected WiFi AP has a mechanism that blocks request under NAT, the browser cannot be opened automatically. You need to enable Browser Station on the NAS to log in to Captive Portal, or select another WiFi network that does not need to log in to Captive Portal.
AX200 card becomes QTS default gateway
automatically
User
Scenario 1

Access NAS via wireless connection

WiFi 6 Router
WiFi
connection
Access NAS via wireless connection
User
Scenario 2

Access Internet via mobile hotspot

Phone Hotspot
WiFi 6
4G/5G Internet
User
NAS can connect to Internet
Scenario 3
wirelessly via another NAS
Connect your NAS wirelessly to another NAS that is installed with QuWAN and QWA­AC2600 with WirelessAP Station. QuWAN provides network optimization, firewall and deep packet inspection on both wireless and wired networks to achieve high-speed
and redundant transmission and security protection mechanisms
QNAP QWA-AC2600 card
+ WirelessAP Station app
Internet
Dual WAN for WAN
optimization and failover
User
Transform your NAS to Wireless
Scenario 4
WiFi 6 Desktop
WiFi 6 NAS can turn into a high speed wireless desktop by connecting HDMI monitor and
keyboard to NAS.
WiFi 6
WiFi 6 Router
QXP-W6-AX200 PCIe WiFi 6 card
Enables NAS and PC with WiFi 6 Gigabit+ connectivity and more responsive performance on dense wireless network
Copyright © 2020 QNAP Systems, Inc. All rights reserved. QNAP® and other names of QNAP Products are proprietary marks or registered trademarks of QNAP Systems, Inc. Other products and company names mentioned herein are trademarks of their respective holders.
Loading...