QNAP QNA-T310G1S User Manual

Hardware Specification

QNA-T310G1S

Interface Single-port Thunderbolt 3 to single-port 10GbE SFP+

Data Transfer 10Gbps

Cables Thunderbolt 3 : Thunderbolt 3 cable

Network cable: SFP+ DAC cable
* 0.5M Thunderbolt 3 40Gb/s cable x 1 included

Power Supply Unit Bus powered

System Requirements (Windows) Windows 7 (64-bit) / Windows 10 (64-bit)

* Required download Aquantia AQC100 driver
* Required a Thunderbolt 3 port on your computer

System Requirements (Mac) macOS 10.13.3 (or later)

* Required a Thunderbolt 3 port on your computer

System Requirements (QNAP NAS) QNAP Thunderbolt 3 NAS (will be supported in Q4/2018)

Operating Temperature & Relative
Humidity

0 ~ 40˚C (32˚F ~ 104˚F)
5~95% (non-condensing)

Dimensions (H x W x D) 27.6 x 56 x 113.2 mm

1.08 x 2.20 x 4.46 inch

Weight Net weight: 0.16Kg, Gross weight: 0.33Kg

LED Indicators Power, LAN Link/Act, transfer speed

Package Contents QNA-T310G1S, 0.5M Thunderbolt 3 cable x 1, installation guide

Note: Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one memory
slot, use QNAP modules with identical specifications. Warning: Using unsupported modules may degrade performance, cause errors,
or prevent the operating system from starting.
* Sound Level Test Environment: Refer to ISO 7779; Maximum HDD loaded; Bystander Position; Average data from 1 meter in front
of operating NAS.
Designs and specifications are subject to change without notice.